RESUMO
Remediation of potentially toxic trace elements (PTEs) in paddy fields is fundamental for crop safety. In situ application of chemical amendments has been widely adapted because of its cost-effectiveness and environmental safety. The main purpose of this research was to (1) evaluate the reduction in dissolved concentrations of cadmium (Cd) and arsenic (As) with the application of chemical amendments and (2) monitor microbial activity in the soil to determine the remediation efficiency. Three different chemical amendments, lime stone, steel slag, and acid mine drainage sludge, were applied to paddy fields, and rice (Oryza sativa L. Milyang 23) was cultivated. The application of chemical amendments immobilized both Cd and As in soil. Between the two PTEs, As reduction was significant (p < 0.05) with the addition of chemical amendments, whereas no significant reduction was observed for Cd than that for the control. Among six soil-related variables, PTE concentration showed a negative correlation with soil pH (r = -0.70 for As and r = -0.54 for Cd) and soil respiration (SR) (r = -0.88 for As and r = -0.45 for Cd). This result indicated that immobilization of PTEs in soil is dependent on soil pH and reduces PTE toxicity. Overall, the application of chemical amendments could be utilized for decreasing PTE (As and Cd) bioavailability and increasing microbial activity in the soil.
Assuntos
Arsênio/farmacocinética , Cádmio/farmacocinética , Recuperação e Remediação Ambiental/métodos , Microbiologia do Solo , Poluentes do Solo/farmacocinética , Arsênio/análise , Disponibilidade Biológica , Biomassa , Cádmio/análise , Carbonato de Cálcio , Oryza , Melhoria de Qualidade , República da Coreia , Esgotos , Solo/química , Poluentes do Solo/análiseRESUMO
Released antibiotics from source to stream can influence bacterial communities and potentially alter the ecosystem. This research provides a comprehensive examination of the sources, distribution, and bacterial community dynamics associated with varied antibiotic release sources adjacent to the stream. The residual of antibiotics from different sources was determined, and the bacterial community structure was examined to reveal the differences in the bacteria community in the stream. The residual of antibiotics was quantified with liquid chromatography-tandem mass spectrometry (LC-MS/MS), and the Illumina MiSeq platform was utilized to sequence bacterial 16S rRNA genes, providing comprehensive insights into the bacterial community structure in the sediment across five different sites. Results indicated that the presence and distribution of antibiotics were significantly influenced by released sources. In the case of the bacterial community, the Proteobacteria and Firmicutes were the most dominant phyla in the sediment, and especially, the Firmicutes showed higher abundance in sites mostly affected by livestock sources. Additionally, livestock gut bacteria such as Clostridium saudiense, Proteiniclasticum ruminis, and Turicibacter sanguinis were prevalent in antibiotic-contaminated sites adjacent to livestock facilities. Overall, this study provides critical insights into the effect of antibiotic contamination by verifying the relationship between the occurrence of antibiotic residuals and the alteration in the bacterial community in the stream.
RESUMO
Veterinary antibiotics (VAs) released into the environment are a concern because of the possibility for increasing antibiotic-resistance genes. The concentrations of six VAs, chlortetracycline, oxytetracycline, tetracycline, sulfamethazine, sulfamethoxazole, and sulfathiazole, in manure-based compost, soil, and crops were measured using liquid chromatography-tandem mass spectrometry. Mass balance analysis was conducted based on the measured antibiotic concentration, cultivation area, and amount of manure-based compost applied. The result showed that the detected mean concentration of VAs ranges was 3.52~234.19 µg/kg, 0.52~13.08 µg/kg, and 1.05~39.57 µg/kg in manure-based compost, soil, and crops, respectively, and the substance of VAs detected in different media was also varied. Mass balance analysis showed that the VAs released from the manure-based compost can remain in soil (at rates of 26% to 100%), be taken up by crops (at rates of 0.4% to 3.7%), or dissipated (at rates of 9% to 73%) during the cultivation period. Among the six VAs, chlortetracycline and oxytetracycline mainly remained in the soil, whereas sulfamethoxazole and sulfathiazole were mainly dissipated. Although we did not verify the exact mechanism of the fate and distribution of VAs in this study, our results showed that these can vary depending on the different characteristics of VAs and the soil properties.
RESUMO
Heavy metal pollution in soil can have detrimental effects on soil ecosystems and human health. In situ remediation techniques are widely used to reduce the bioavailable fractions of heavy metals in soil. The main objective of this study was to examine the reduction of the bioavailable fractions of As and Pb in paddy soil with artificial lightweight material (ALM) manufactured from recycled materials. A total of four treatments, including a control (no amendment), ALM10 (10% of ALM in soil), ALM10+L (10% ALM combined with 0.5% lime), and ALM10+FeO (10% ALM combined with 0.5% FeO), were applied to paddy fields, and rice (Oryza sativa L.) was cultivated after 32 weeks. The highest reduction efficiencies for the bioavailable fractions of As and Pb in soil were observed in the ALM10+FeO (52.8%) and ALM10+L treatments (65.7%), respectively. The uptake of As decreased by 52.1% when ALM10+FeO was applied to paddy soil, and that of Pb decreased by 79.7% when ALM10+L was applied. Correlation analysis between bioavailable heavy metals in soil and soil chemical properties showed that soil pH, electrical conductivity (EC), P2O5, and soil organic matter (SOM) were the main factors controlling the mobility and bioavailability of As and Pb. Overall, the efficiencies of As and Pb reduction increased synergistically in both soil and plants when FeO and lime were combined with the ALM. In future studies, long-term monitoring is necessary to examine the longevity of soil amendments.
RESUMO
Heavy metal pollution in the environment is a critical issue, engendering ecosystem deterioration and adverse effects on human health. The main objective of this study was to evaluate heavy metal adsorbents by modifying industrial byproducts. The bottom ash was sintered and evaluated for Cd and Pb sorption. Three adsorbents (bottom ash, sintered bottom ash (SBA), and SBA mixed with microorganisms (SBMA)) were tested to evaluate the sorption kinetics and mechanism using a lab-scale batch experiment. The results showed that the highest sorption efficiency was observed for Cd (98.16%) and Pb (98.41%) with 10% SBA. The pseudo-second-order kinetic model (R2 > 0.99) represented the sorption kinetics better than the pseudo-first-order kinetic model for the SBA and SBMA, indicating that chemical precipitation could be the dominant sorption mechanism. This result is supported by X-ray photoelectron spectroscopy analysis, demonstrating that -OH, -CO3, -O, and -S complexation was formed at the surface of the sintered materials as Cd(OH)2 and CdCO3 for Cd and PbO, and PbS for Pb. Overall, SBA could be utilized for heavy metal sorption. Further research is necessary to enhance the sorption capacity and longevity of modified industrial byproducts.
RESUMO
Soil washing and landfarming processes are widely used to remediate total petroleum hydrocarbon (TPH)-contaminated soil, but the impact of these processes on soil bacteria is not well understood. Four different states of soil (uncontaminated soil (control), TPH-contaminated soil (CS), after soil washing (SW), and landfarming (LF)) were collected from a soil remediation facility to investigate the impact of TPH and soil remediation processes on soil bacterial populations by metagenomic analysis. Results showed that TPH contamination reduced the operational taxonomic unit (OTU) number and alpha diversity of soil bacteria. Compared to SW and LF remediation techniques, LF increased more bacterial richness and diversity than SW, indicating that LF is a more effective technique for TPH remediation in terms of microbial recovery. Among different bacterial species, Proteobacteria were the most abundant in all soil groups followed by Actinobacteria, Acidobacteria, and Firmicutes. For each soil group, the distribution pattern of the Proteobacteria class was different. The most abundant classed were Alphaproteobacteria (16.56%) in uncontaminated soils, Deltaproteobacteria (34%) in TPH-contaminated soils, Betaproteobacteria (24%) in soil washing, and Gammaproteobacteria (24%) in landfarming, respectively. TPH-degrading bacteria were detected from soil washing (23%) and TPH-contaminated soils (21%) and decreased to 12% in landfarming soil. These results suggest that soil pollution can change the diversity of microbial groups and different remediation techniques have varied effective ranges for recovering bacterial communities and diversity. In conclusion, the landfarming process of TPH remediation is more advantageous than soil washing from the perspective of bacterial ecology.
RESUMO
A simple procedure for the fabrication of sub-10 nm scale Si nanopillars in a 2-D array using reactive ion etching with 8 nm Co nanoparticles as etch masks is demonstrated. The obtained Si nanopillars are single crystalline tapered pillar structures of 5 nm (top) x 8 nm (bottom) with a density of approximately 4 x 10(10) pillars cm(-2) on the substrate, similar to the density of Co nanoparticles distributed before the ion etching process. The uniform spatial distribution of the Si nanopillars can also be patterned into desired positions. Our fabrication method is straightforward and requires mild process conditions, which can be extended to patterned 2-D arrays of various Si nanostructures.