Structural evidence for asymmetrical nucleotide interactions in nitrogenase.

The roles of ATP hydrolysis in electron-transfer (ET) reactions of the nitrogenase catalytic cycle remain obscure. Here, we present a new structure of a nitrogenase complex crystallized with MgADP and MgAMPPCP, an ATP analogue. In this structure the two nucleotides are bound asymmetrically by the Fe-protein subunits connected to the two different MoFe-protein subunits. This binding mode suggests that ATP hydrolysis and phosphate release may proceed by a stepwise mechanism. Through the associated Fe-protein conformational changes, a stepwise mechanism is anticipated to prolong the lifetime of the Fe-protein-MoFe-protein complex and, in turn, could orchestrate the sequence of intracomplex ET required for substrate reduction.

Turnover-dependent inactivation of the nitrogenase MoFe-protein at high pH.

Proton uptake accompanies the reduction of all known substrates by nitrogenase. As a consequence, a higher pH should limit the availability of protons as a substrate essential for turnover, thereby increasing the proportion of more highly reduced forms of the enzyme for further study. The utility of the high-pH approach would appear to be problematic in view of the observation reported by Pham and Burgess [(1993) Biochemistry 32, 13725-13731] that the MoFe-protein undergoes irreversible protein denaturation above pH 8.65. In contrast, we found by both enzyme activity and crystallographic analyses that the MoFe-protein is stable when incubated at pH 9.5. We did observe, however, that at higher pHs and under turnover conditions, the MoFe-protein is slowly inactivated. While a normal, albeit low, level of substrate reduction occurs under these conditions, the MoFe-protein undergoes a complex transformation; initially, the enzyme is reversibly inhibited for substrate reduction at pH 9.5, yet in a second, slower process, the MoFe-protein becomes irreversibly inactivated as measured by substrate reduction activity at the optimal pH of 7.8. The final inactivated MoFe-protein has an increased hydrodynamic radius compared to that of the native MoFe-protein, yet it has a full complement of iron and molybdenum. Significantly, the modified MoFe-protein retains the ability to specifically interact with its nitrogenase partner, the Fe-protein, as judged by the support of ATP hydrolysis and by formation of a tight complex with the Fe-protein in the presence of ATP and aluminum fluoride. The turnover-dependent inactivation coupled to conformational change suggests a mechanism-based transformation that may provide a new probe of nitrogenase catalysis.

The sixteenth iron in the nitrogenase MoFe protein.

Another iron in the fire: X-ray anomalous diffraction studies on the nitrogenase MoFe protein show the presence of a mononuclear iron site, designated as Fe16, which was previously identified as either Ca(2+) or Mg(2+). The position of the absorption edge indicates that this site is in the oxidation state +2. The high sequence conservation of the residues coordinated to Fe16 emphasizes the potential importance of the site in nitrogenase.

Structural consequences of turnover-induced homocitrate loss in nitrogenase.

Nitrogenase catalyzes the ATP-dependent reduction of dinitrogen to ammonia during the process of biological nitrogen fixation that is essential for sustaining life. The active site FeMo-cofactor contains a [7Fe:1Mo:9S:1C] metallocluster coordinated with an R-homocitrate (HCA) molecule. Here, we establish through single particle cryoEM and chemical analysis of two forms of the Azotobacter vinelandii MoFe-protein - a high pH turnover inactivated species and a ∆NifV variant that cannot synthesize HCA - that loss of HCA is coupled to α-subunit domain and FeMo-cofactor disordering, and formation of a histidine coordination site. We further find a population of the ∆NifV variant complexed to an endogenous protein identified through structural and proteomic approaches as the uncharacterized protein NafT. Recognition by endogenous NafT demonstrates the physiological relevance of the HCA-compromised form, perhaps for cofactor insertion or repair. Our results point towards a dynamic active site in which HCA plays a role in enabling nitrogenase catalysis by facilitating activation of the FeMo-cofactor from a relatively stable form to a state capable of reducing dinitrogen under ambient conditions.

Catalysis-dependent selenium incorporation and migration in the nitrogenase active site iron-molybdenum cofactor.

Dinitrogen reduction in the biological nitrogen cycle is catalyzed by nitrogenase, a two-component metalloenzyme. Understanding of the transformation of the inert resting state of the active site FeMo-cofactor into an activated state capable of reducing dinitrogen remains elusive. Here we report the catalysis dependent, site-selective incorporation of selenium into the FeMo-cofactor from selenocyanate as a newly identified substrate and inhibitor. The 1.60 Å resolution structure reveals selenium occupying the S2B site of FeMo-cofactor in the Azotobacter vinelandii MoFe-protein, a position that was recently identified as the CO-binding site. The Se2B-labeled enzyme retains substrate reduction activity and marks the starting point for a crystallographic pulse-chase experiment of the active site during turnover. Through a series of crystal structures obtained at resolutions of 1.32-1.66 Å, including the CO-inhibited form of Av1-Se2B, the exchangeability of all three belt-sulfur sites is demonstrated, providing direct insights into unforeseen rearrangements of the metal center during catalysis.

Ligand binding to the FeMo-cofactor: structures of CO-bound and reactivated nitrogenase.

The mechanism of nitrogenase remains enigmatic, with a major unresolved issue concerning how inhibitors and substrates bind to the active site. We report a crystal structure of carbon monoxide (CO)-inhibited nitrogenase molybdenum-iron (MoFe)-protein at 1.50 angstrom resolution, which reveals a CO molecule bridging Fe2 and Fe6 of the FeMo-cofactor. The µ2 binding geometry is achieved by replacing a belt-sulfur atom (S2B) and highlights the generation of a reactive iron species uncovered by the displacement of sulfur. The CO inhibition is fully reversible as established by regain of enzyme activity and reappearance of S2B in the 1.43 angstrom resolution structure of the reactivated enzyme. The substantial and reversible reorganization of the FeMo-cofactor accompanying CO binding was unanticipated and provides insights into a catalytically competent state of nitrogenase.

Multiple amino acid sequence alignment nitrogenase component 1: insights into phylogenetics and structure-function relationships.

Amino acid residues critical for a protein's structure-function are retained by natural selection and these residues are identified by the level of variance in co-aligned homologous protein sequences. The relevant residues in the nitrogen fixation Component 1 α- and ß-subunits were identified by the alignment of 95 protein sequences. Proteins were included from species encompassing multiple microbial phyla and diverse ecological niches as well as the nitrogen fixation genotypes, anf, nif, and vnf, which encode proteins associated with cofactors differing at one metal site. After adjusting for differences in sequence length, insertions, and deletions, the remaining >85% of the sequence co-aligned the subunits from the three genotypes. Six Groups, designated Anf, Vnf , and Nif I-IV, were assigned based upon genetic origin, sequence adjustments, and conserved residues. Both subunits subdivided into the same groups. Invariant and single variant residues were identified and were defined as "core" for nitrogenase function. Three species in Group Nif-III, Candidatus Desulforudis audaxviator, Desulfotomaculum kuznetsovii, and Thermodesulfatator indicus, were found to have a seleno-cysteine that replaces one cysteinyl ligand of the 8Fe:7S, P-cluster. Subsets of invariant residues, limited to individual groups, were identified; these unique residues help identify the gene of origin (anf, nif, or vnf) yet should not be considered diagnostic of the metal content of associated cofactors. Fourteen of the 19 residues that compose the cofactor pocket are invariant or single variant; the other five residues are highly variable but do not correlate with the putative metal content of the cofactor. The variable residues are clustered on one side of the cofactor, away from other functional centers in the three dimensional structure. Many of the invariant and single variant residues were not previously recognized as potentially critical and their identification provides the bases for new analyses of the three-dimensional structure and for mutagenesis studies.

How many metals does it take to fix N2? A mechanistic overview of biological nitrogen fixation.

During the process of biological nitrogen fixation, the enzyme nitrogenase catalyzes the ATP-dependent reduction of dinitrogen to ammonia. Nitrogenase consists of two component metalloproteins, the iron (Fe) protein and the molybdenum-iron (MoFe) protein; the Fe protein mediates the coupling of ATP hydrolysis to interprotein electron transfer, whereas the active site of the MoFe protein contains the polynuclear FeMo cofactor, a species composed of seven iron atoms, one molybdenum atom, nine sulfur atoms, an interstitial light atom, and one homocitrate molecule. This Perspective provides an overview of biological nitrogen fixation and introduces three contributions to this special feature that address central aspects of the mechanism and assembly of nitrogenase.

Structural basis of biological nitrogen fixation.

Biological nitrogen fixation is mediated by the nitrogenase enzyme system that catalyses the ATP dependent reduction of atmospheric dinitrogen to ammonia. Nitrogenase consists of two component metalloproteins, the MoFe-protein with the FeMo-cofactor that provides the active site for substrate reduction, and the Fe-protein that couples ATP hydrolysis to electron transfer. An overview of the nitrogenase system is presented that emphasizes the structural organization of the proteins and associated metalloclusters that have the remarkable ability to catalyse nitrogen fixation under ambient conditions. Although the mechanism of ammonia formation by nitrogenase remains enigmatic, mechanistic inferences motivated by recent developments in the areas of nitrogenase biochemistry, spectroscopy, model chemistry and computational studies are discussed within this structural framework.

Nitrogenase complexes: multiple docking sites for a nucleotide switch protein.

Adenosine triphosphate (ATP) hydrolysis in the nitrogenase complex controls the cycle of association and dissociation between the electron donor adenosine triphosphatase (ATPase) (Fe-protein) and its target catalytic protein (MoFe-protein), driving the reduction of dinitrogen into ammonia. Crystal structures in different nucleotide states have been determined that identify conformational changes in the nitrogenase complex during ATP turnover. These structures reveal distinct and mutually exclusive interaction sites on the MoFe-protein surface that are selectively populated, depending on the Fe-protein nucleotide state. A consequence of these different docking geometries is that the distance between redox cofactors, a critical determinant of the intermolecular electron transfer rate, is coupled to the nucleotide state. More generally, stabilization of distinct docking geometries by different nucleotide states, as seen for nitrogenase, could enable nucleotide hydrolysis to drive the relative motion of protein partners in molecular motors and other systems.

The interface between the biological and inorganic worlds: iron-sulfur metalloclusters.

Complex iron-sulfur metalloclusters form the active sites of the enzymes that catalyze redox transformations of N2, CO, and H2, which are likely components of Earth's primordial atmosphere. Although these centers reflect the organizational principles of simpler iron-sulfur clusters, they exhibit extensive elaborations that confer specific ligand-binding and catalytic properties. These changes were probably achieved through evolutionary processes, including the fusion of small clusters, the addition of new metals, and the development of cluster assembly pathways, driven by selective pressures resulting from changes in the chemical composition of the biosphere.

Biochemical and structural characterization of the cross-linked complex of nitrogenase: comparison to the ADP-AlF4(-)-stabilized structure.

The transient formation of a complex between the component Fe- and MoFe-proteins of nitrogenase represents a central event in the substrate reduction mechanism of this enzyme. Previously, we have isolated an N-[3-(dimethylamino)propyl]-N'-ethylcarbodiimide (EDC) cross-linked complex of these proteins stabilized by a covalent isopeptide linkage between Glu 112 and Lys beta400 of the Fe-protein and MoFe-protein, respectively [Willing, A., et al. (1989) J. Biol. Chem. 264, 8499-8503; Willing, A., and Howard, J. B. (1990) J. Biol. Chem. 265, 6596-6599]. We report here the biochemical and structural characterization of the cross-linked complex to assess the mechanistic relevance of this species. Glycinamide inhibits the cross-linking reaction, and is found to be specifically incorporated into Glu 112 of the Fe-protein, without detectable modification of either of the neighboring residues (Glu 110 and Glu 111). This modified protein is still competent for substrate reduction, demonstrating that formation of the cross-linked complex is responsible for the enzymatic inactivation, and not the EDC reaction or the modification of the Fe-protein. Crystallographic analysis of the EDC-cross-linked complex at 3.2 A resolution confirms the site of the isopeptide linkage. The nature of the protein surfaces around the cross-linking site suggests there is a strong electrostatic component to the formation of the complex, although the interface area between the component proteins is small. The binding footprints between proteins in the cross-linked complex are adjacent, but with little overlap, to those observed in the complex of the nitrogenase proteins stabilized by ADP-AlF(4)(-). The results of these studies suggest that EDC cross-linking traps a nucleotide-independent precomplex of the nitrogenase proteins driven by complementary electrostatic interactions that subsequently rearranges in a nucleotide-dependent fashion to the electron transfer competent state observed in the ADP-AlF(4)(-) structure.

Nitrogenase MoFe-protein at 1.16 A resolution: a central ligand in the FeMo-cofactor.

A high-resolution crystallographic analysis of the nitrogenase MoFe-protein reveals a previously unrecognized ligand coordinated to six iron atoms in the center of the catalytically essential FeMo-cofactor. The electron density for this ligand is masked in structures with resolutions lower than 1.55 angstroms, owing to Fourier series termination ripples from the surrounding iron and sulfur atoms in the cofactor. The central atom completes an approximate tetrahedral coordination for the six iron atoms, instead of the trigonal coordination proposed on the basis of lower resolution structures. The crystallographic refinement at 1.16 angstrom resolution is consistent with this newly detected component being a light element, most plausibly nitrogen. The presence of a nitrogen atom in the cofactor would have important implications for the mechanism of dinitrogen reduction by nitrogenase.