RESUMO
MXenes have the potential for efficient light-to-heat conversion in photothermal applications. To effectively utilize MXenes in such applications, it is important to understand the underlying nonequilibrium processes, including electron-phonon and phonon-phonon couplings. Here, we use transient electron and X-ray diffraction to investigate the heating and cooling of photoexcited MXenes at femtosecond to nanosecond time scales. Our results show extremely strong electron-phonon coupling in Ti3C2-based MXenes, resulting in lattice heating within a few hundred femtoseconds. We also systematically study heat dissipation in MXenes with varying film thicknesses, chemical surface terminations, flake sizes, and annealing conditions. We find that the thermal boundary conductance (TBC) governs the thermal relaxation in films thinner than the optical penetration depth. We achieve a 2-fold enhancement of the TBC, reaching 20 MW m-2 K-1, by controlling the flake size or chemical surface termination, which is promising for engineering heat dissipation in photothermal and thermoelectric applications of the MXenes.
RESUMO
HgTe colloidal quantum dots (CQDs) are promising absorber systems for infrared detection due to their widely tunable photoresponse in all infrared regions. Up to now, the best-performing HgTe CQD photodetectors have relied on using aggregated CQDs, limiting the device design, uniformity and performance. Herein, we report a ligand-engineered approach that produces well-separated HgTe CQDs. The present strategy first employs strong-binding alkyl thioalcohol ligands to enable the synthesis of well-dispersed HgTe cores, followed by a second growth process and a final postligand modification step enhancing their colloidal stability. We demonstrate highly monodisperse HgTe CQDs in a wide size range, from 4.2 to 15.0 nm with sharp excitonic absorption fully covering short- and midwave infrared regions, together with a record electron mobility of up to 18.4 cm2 V-1 s-1. The photodetectors show a room-temperature detectivity of 3.9 × 1011 jones at a 1.7 µm cutoff absorption edge.
RESUMO
Solution-processed colloidal quantum dots (CQDs) are promising candidates for the third-generation photovoltaics due to their low cost and spectral tunability. The development of CQD solar cells mainly relies on high-quality CQD ink, smooth and dense film, and charge-extraction-favored device architectures. In particular, advances in the processing of CQDs are essential for high-quality QD solids. The phase transfer exchange (PTE), in contrast with traditional solid-state ligand exchange, has demonstrated to be the most promising approach for high-quality QD solids in terms of charge transport and defect passivation. As a result, the efficiencies of Pb chalcogenide CQD solar cells have been rapidly improved to 14.0%. In this review, the development of the PTE method is briefly reviewed for lead chalcogenide CQD ink preparation, film assembly, and device construction. Particularly, the key roles of lead halides and additional additives are emphasized for defect passivation and charge transport improvement. In the end, several potential directions for future research are proposed.
RESUMO
Lead selenide (PbSe) colloidal quantum dots (CQDs) are promising candidates for optoelectronic applications. To date, PbSe CQDs capped by halide ligands exhibit improved stability and solar cells using these CQDs as active layers have reported a remarkable power conversion efficiency (PCE) up to 10%. However, PbSe CQDs are more prone to oxidation, requiring delicate control over their processability and compromising their applications. Herein, an efficient strategy that addresses this issue by an in situ cation-exchange process is reported. This is achieved by a two-phase ligand exchange process where PbI2 serves as both a passivating ligand and cation-source inducing transformation of CdSe to PbSe. The defect density and carrier lifetime of PbSe CQD films are improved to 1.05 × 1016 cm-3 and 12.2 ns, whereas the traditional PbSe CQD films possess 1.9 × 1016 cm-3 defect density and 10.2 ns carrier lifetime. These improvements are translated into an enhancement of photovoltaic performance of PbSe solar cells, with a PCE of up to 11.6%, ≈10% higher than the previous record. Notably, the approach enables greatly improved stability and a two-month stability is successfully demonstrated. This strategy is expected to promote the fast development of PbSe CQD applications in low-cost and high-performance optoelectronic devices.
RESUMO
Although lead halide perovskites are demonstrated to be promising photocatalysts for hydrogen evolution from hydrogen halide splitting, it still remains challenging to fabricate efficient and stable catalysts. Here MoS2 nanoflowers with abundant active sites are assembled with methylammonium lead iodide (MAPbI3) microcrystals to form a new heterostructure. Its hydrogen evolution rate can reach up to about 30â¯000 µmol g-1 h-1, which is more than 1000-fold higher than pristine MAPbI3 under visible light irradiation (λ ≥ 420 nm). Importantly, the solar HI splitting efficiency reaches 7.35%, one of the highest efficiencies so far. The introduction of MoS2 with proper band alignment and unsaturated species can efficiently promote the charge separation and afford more active sites for H2 production. This finding not only provides a highly efficient and stable photocatalyst for hydrogen evolution but also offers a useful modification strategy on lead halide perovskites.
RESUMO
X-type ligands, for example, the pair of oleylamine (OAm) and oleic acid (OA), have been widely used to prepare CsPbX3 nanocrystals (NCs). However, the proton exchange between coordinated OAm and OA may induce the detachment of ligands, resulting in poor performance after cleaning or long-time storage. Herein, density functional theory calculations predict that primary amines (L-type ligands) can stabilize a PbBr x-rich surface and yield a trap-free material with fully delocalized valence band maximum and conduction band minimum states, which can significantly improve the photophysical properties and stability of CsPbBr3 NCs. Along this prediction, a room-temperature reprecipitation method using L-type ligands (OAm, n-octylamine, or undecylamine) as the sole capping ligand has been developed to synthesize high-quality CsPbBr3 NCs with near-unity photoluminescence quantum yield and dramatically improved stability against purification and water treatment. The enhancement can be attributed to the strong binding of unprotonated amines to lead atoms and the effective surface passivation provided by the resulted PbBr x-rich surface, which are highly consistent with the theoretical predictions. This work not only offers an approach to synthesize high-quality perovskite NCs but also provides an in-depth understanding of the surface modification of CsPbX3 NCs for practical applications.
RESUMO
The poor stability of CsPbX3 (X = Cl, Br, I) nanocrystals (NCs) has severely impeded their practical applications. Although there are some successful examples on encapsulating multiple CsPbX3 NCs into an oxide or polymer matrix, it has remained a serious challenge for the surface modification/encapsulation using oxides or polymers at a single particle level. In this work, monodisperse CsPbX3/SiO2 and CsPbBr3/Ta2O5 Janus nanoparticles were successfully prepared by combining a water-triggered transformation process and a sol-gel method. The CsPbBr3/SiO2 NCs exhibited a photoluminescence quantum yield of 80% and a lifetime of 19.8 ns. The product showed dramatically improved stability against destruction by air, water, and light irradiation. Upon continuous irradiation by intense UV light for 10 h, a film of the CsPbBr3/SiO2 Janus NCs showed only a slight drop (2%) in the PL intensity, while a control sample of unmodified CsPbBr3 NCs displayed a 35% drop. We further highlighted the advantageous features of the CsPbBr3/SiO2 NCs in practical applications by using them as the green light source for the fabrication of a prototype white light emitting diode, and demonstrated a wide color gamut covering up to 138% of the National Television System Committee standard. This work not only provides a novel approach for the surface modification of individual CsPbX3 NCs but also helps to address the challenging stability issue; therefore, it has an important implication toward their practical applications.
RESUMO
As a promising material, Cs4PbX6 (X = Cl, Br, I) nanocrystals (NCs) have attracted much attention. However, their luminescent property is still under debate. In this work, we first systematically studied the colloidal preparation of Cs4PbX6 NCs. It is found that the critical parameter for the formation of Cs4PbX6 NCs is the ratio between Cs and Pb. Pure Cs4PbX6 NCs are nonluminescent. The luminescence property of previous reported Cs4PbX6 NCs may come from the impurity of luminescent CsPbX3 NCs. No coexistence of both Cs4PbX6 and CsPbX3 phase has been found in one single nanoparticle. The water-triggered transformation from nonluminescent Cs4PbX6 NCs to luminescent CsPbX3 NCs has been quantitatively studied. The potential application of Cs4PbX6 NCs in humidity sensor and anticounterfeiting have been demonstrated. This work is important because it not only confirmed the nonluminescent nature of Cs4PbX6 NCs but also demonstrated the potential application of such NCs.
RESUMO
We report a novel CsX-stripping mechanism that enables the efficient chemical transformation of nonluminescent Cs4PbX6 (X = Cl, Br, I) nanocrystals (NCs) to highly luminescent CsPbX3 NCs. During the transformation, Cs4PbX6 NCs dispersed in a nonpolar solvent are converted into CsPbX3 NCs by stripping CsX through an interfacial reaction with water in a different phase. This process takes advantage of the high solubility of CsX in water as well as the ionic nature and high ion diffusion property of Cs4PbX6 NCs, and produces monodisperse and air-stable CsPbX3 NCs with controllable halide composition, tunable emission wavelength covering the full visible range, narrow emission width, and high photoluminescent quantum yield (up to 75%). An additional advantage is that this is a clean synthesis as Cs4PbX6 NCs are converted into CsPbX3 NCs in the nonpolar phase while the byproduct of CsX is formed in water that could be easily separated from the organic phase. The as-prepared CsPbX3 NCs show enhanced stability against moisture because of the passivated surface. Our finding not only provides a new pathway for the preparation of highly luminescent CsPbX3 NCs but also adds insights into the chemical transformation behavior and stabilization mechanism of these emerging perovskite nanocrystals.
RESUMO
Recently, Janus nanostructures that possess two or more different surface functions have attracted enormous attention because of their unique structures and promising applications in diverse fields. In this work, we present that Janus structured dendritic mesoporous silica@resorcinol-formaldehyde (DMS@RF) nanoparticles can be prepared through a simple one-pot colloidal method. The Janus DMS@RF nanoparticle shows a bonsai-like morphology which consists of a dendritic mesoporous silica part and a spherical RF part. After a systematic study on the growth process, we proposed a competing growth mechanism that accounts for the formation of Janus nanostructures. It is believed that suitable polymerization rate of silica and RF resin is critical. Based on the competing growth mechanism, eccentric and concentric core-shell nanostructures have been successfully prepared by tuning the polymerization rates of silica and RF, respectively. Metal-contained ternary Janus nanoparticles that might be used for catalysis have also been prepared. This research may pave the way for the practical applications of delicate nanomaterials with desired structures and properties.
RESUMO
Recently, all-inorganic cesium lead halide (CsPbX3, X = Cl, Br, and I) nanocrystals (NCs) have drawn wide attention because of their excellent optoelectronic properties and potential applications. However, one of the most significant challenges of such NCs is their low stability against protonic solvents. In this work, we demonstrate that by incorporating a highly branched capping ligand, trioctylphosphine oxide (TOPO), into the traditional oleic acid/oleylamine system, monodisperse CsPbX3 NCs with excellent optoelectronic properties can be achieved at elevated temperatures (up to 260 °C). The size of such NCs can be varied in a relatively wide range. The capping of TOPO on NCs has been verified through Fourier transform infrared spectroscopy measurement. More importantly, the presence of TOPO can dramatically improve the stability of CsPbX3 NCs against ethanol treatment. After ethanol treatment for 100 min, the emission intensity of the TOPO-capped sample dropped only 5%, whereas that of non-TOPO-capped NCs dropped up to 86%. This work may shed some light on the preparation and application of CsPbX3 NCs with higher stability.
RESUMO
HgTe nanocrystals (NCs) possess advantages including tunable infrared absorption spectra, solution processability, and low fabrication costs, offering new avenues for the advancement of next-generation infrared detectors. In spite of great synthetic advances, it remains essential to achieve customized synthesis of HgTe NCs in terms of industrial applications. Herein, by taking advantage of a high critical nucleation concentration of HgTe NCs, a continuous-dropwise (CD) synthetic approach that features the addition of the anion precursors in a feasible drop-by-drop fashion is demonstrated. The slow reaction dynamics enable size-customized synthesis of HgTe NCs with sharp band tails and wide absorption range fully covering the short- and mid-infrared regions. More importantly, the intrinsic advantages of CD process ensure high-uniformity and scale-up synthesis from batch to batch without compromising the excitonic features. The resultant HgTe nanocrystal photodetectors show a high room-temperature detectivity of 8.1 × 1011 Jones at 1.7 µm cutoff absorption edge. This CD approach verifies a robust method for controlled synthesis of HgTe NCs and might have important implications for scale-up synthesis of other nanocrystal materials.
RESUMO
Semiconductor-based biointerfaces are typically established either on the surface of the plasma membrane or within the cytoplasm. In Gram-negative bacteria, the periplasmic space, characterized by its confinement and the presence of numerous enzymes and peptidoglycans, offers additional opportunities for biomineralization, allowing for nongenetic modulation interfaces. We demonstrate semiconductor nanocluster precipitation containing single- and multiple-metal elements within the periplasm, as observed through various electron- and x-ray-based imaging techniques. The periplasmic semiconductors are metastable and display defect-dominant fluorescent properties. Unexpectedly, the defect-rich (i.e., the low-grade) semiconductor nanoclusters produced in situ can still increase adenosine triphosphate levels and malate production when coupled with photosensitization. We expand the sustainability levels of the biohybrid system to include reducing heavy metals at the primary level, building living bioreactors at the secondary level, and creating semi-artificial photosynthesis at the tertiary level. The biomineralization-enabled periplasmic biohybrids have the potential to serve as defect-tolerant platforms for diverse sustainable applications.
Assuntos
Biomineralização , Periplasma , Periplasma/metabolismo , Membrana Celular/metabolismo , Citoplasma/metabolismo , FotossínteseRESUMO
Two-dimensional (2D) transition-metal carbides and nitrides (MXenes) combine the electronic and mechanical properties of 2D inorganic crystals with chemically modifiable surfaces, which provides an ideal platform for both fundamental and applied studies of interfaces. Good progress has been achieved in the functionalization of MXenes with small inorganic ligands, but relatively little work has been reported on the covalent bonding of various organic groups to MXene surfaces. Here we synthesize a family of hybrid MXenes (h-MXenes) that incorporate amido- and imido-bonding between organic and inorganic parts by reacting halogen-terminated MXenes with deprotonated organic amines. The resulting hybrid structures unite tailorability of organic molecules with electronic connectivity and other properties of inorganic 2D materials. Describing the structure of h-MXene necessitates the integration of concepts from coordination chemistry, self-assembled monolayers and surface science. The optical properties of h-MXenes reveal coherent coupling between the organic and inorganic constituents. h-MXenes also exhibit superior stability against hydrolysis.
RESUMO
Lead sulfide (PbS) colloidal quantum dots (CQDs) for photodetectors (PDs) have garnered great attention due to their potential use as low-cost, high-performance, and large-area infrared focal plane arrays. The prevailing device architecture employed for PbS CQD PDs is the p-i-n structure, where PbS CQD films treated with thiol molecules, such as 1,2-ethanedithiol (EDT), are widely used as p-type layers due to their favorable band alignment. However, PbS-EDT films face a critical challenge associated with low film quality, resulting in many defects that curtail the device performance. Herein, a controlled oxidization process is developed for better surface passivation of the PbS-EDT transport layer. The dark current density (Jd) of PbS CQD PDs based on optimized PbS-EDT layer shows a dramatic decrease by nearly 2 orders of magnitude. The increase of carrier lifetime and suppression of carrier recombination via controlled oxidation in PbS-EDT CQDs were confirmed by transient absorption spectra and electrochemical impedance spectra. The device based on the optimized PbS-EDT hole transport layer (HTL) exhibits a specific detectivity (D*) that is 3.4 times higher compared to the control device. Finally, the CQD PD employing oxidization PbS-EDT CQDs is integrated with a thin film transistor (TFT) readout circuit, which successfully accomplishes material discrimination imaging, material occlusion imaging, and smoke penetration imaging. The controlled oxidization strategy verifies the significance of surface management of CQD solids and is expected to help advance infrared optoelectronic applications based on CQDs.
RESUMO
One of the main challenges of all-inorganic cesium lead halide (CsPbX3) perovskite nanocrystals (NCs) in photocatalysis is their poor stability in hostile environments such as polar solvents. Herein, we report highly stable CsPbBr3 colloidal nanocrystal clusters (CNCs) with uniform morphology and size prepared by using a PVP-assisted reprecipitation method. A possible formation process through a self-assembly avenue is proposed. These CsPbBr3 CNCs exhibit much enhanced resistance against a variety of polar solvents in comparison with CsPbBr3 NCs obtained from the commonly used hot-injection method. In addition, this method can be generalized to the synthesis of lead-free perovskites CNCs. The as-prepared CsPbBr3 CNCs display good reactivity and high durability in photocatalytic degradation of methylene blue in alcoholic systems. This work will shed some light on the stabilization of perovskite NCs in polar solvents and perovskite NC-based photocatalysts.
RESUMO
Lead halide perovskite nanocrystals (CsPbX3 NCs) have been regarded as promising materials in photocatalysis. Combining metal single atoms with CsPbX3 NCs may be a practical way in exploring perovskite-based catalysts. However, such hybrids have not been achieved experimentally yet, mainly due to the weak interaction between the metal atom and the CsPbX3 surface. Here, we demonstrate that Pt single atoms can be deposited on CsPbBr3 NCs through a photoassisted approach, in which the surface was partially oxidized first, followed by the anchoring of Pt single atoms through the formation of Pt-O and Pt-Br bonds. The deposition of Pt single atoms can significantly change the photophysical properties of CsPbBr3 NCs by inducing the generation of deep trap states in the band gap. The as-prepared Pt-SA/CsPbBr3 can be used as efficient and durable catalysts for photocatalytic semi-hydrogenation of propyne. A CsPbBr3 nanocrystal might be a suitable substrate for anchoring other metal single atoms, such as Cu, Au, Ag, Pd, and so on.
RESUMO
Versatile chemical transformations of surface functional groups in two-dimensional transition-metal carbides (MXenes) open up a previously unexplored design space for this broad class of functional materials. We introduce a general strategy to install and remove surface groups by performing substitution and elimination reactions in molten inorganic salts. Successful synthesis of MXenes with oxygen, imido, sulfur, chlorine, selenium, bromine, and tellurium surface terminations, as well as bare MXenes (no surface termination), was demonstrated. These MXenes show distinctive structural and electronic properties. For example, the surface groups control interatomic distances in the MXene lattice, and Ti n +1C n (n = 1, 2) MXenes terminated with telluride (Te2-) ligands show a giant (>18%) in-plane lattice expansion compared with the unstrained titanium carbide lattice. The surface groups also control superconductivity of niobium carbide MXenes.
RESUMO
Fabricating CsPbX3-based heterostructures has proven to be a feasible way to tune their photophysical properties. Here, we report the successful fabrication of Janus CsPbX3/ZrO2 heterostructure nanocrystals (NCs), in which each CsPbX3 NC is partially covered by ZrO2. According to the band alignment, CsPbBr3/ZrO2 and CsPbI3/ZrO2 can be indexed as type I and type II composites, respectively. The type I composites display great enhancement in photoluminescence quantum yield (from 63 to 90%) and photoluminescence lifetime (from 12.9 to 66.1 ns) because of the charge carrier confinement and passivation effect provided by ZrO2. In contrast, the type II composites can be used in photocatalytic reduction of CO2 because electrons and holes are effectively separated and accumulated in ZrO2 and CsPbI3, respectively, under irradiation. Janus CsPbBr3/ZrO2 NCs showed a stability much higher than that of pristine CsPbBr3 against polar solvent treatment. A stable and highly efficient light-emitting device with luminous efficiency up to 55 lm W-1 is fabricated by using CsPbBr3/ZrO2 NCs as the green light source. This work may not only enrich the family of surface-passivated perovskite materials but also provide a good example for the rational design of specific composites in the metal halide perovskite field.
RESUMO
Although all-inorganic CsPbX3 (X = Cl, Br, I) nanocrystals (NCs) have been considered as a promising material for photoelectronic devices, their applications are still limited because of their poor stability and the lack of in-depth understanding. Here, we demonstrate a post-treatment method for the preparation of ultrathin CsPbX3 nanowires (NWs) by treating CsPbBr3 nanocubes with thiourea solution. A systematic study showed a consecutive interfacial transformation process, in which CsPbBr3 nanocubes were first converted to Cs4PbBr6 NCs in the presence of thiourea, followed by a further transformation to CsPbBr3 NCs through an interfacial CsX-stripping process. To reduce the surface energy, an oriented attachment process has been realized and CsPbBr3 NCs aggregated to form ultrathin NWs. The ultrathin CsPbBr3 NWs exhibited high photoluminescence quantum yield (up to 60%) and high resistance to water treatment, which can be attributed to the surface passivation by thiourea. In addition to thiourea, cysteine and thioacetamide that contain the thiol group can also be used to trigger this transformation. This work can not only offer a facile method for the synthesis of efficient and stable ultrathin CsPbBr3 NWs but also help to reveal the in-depth mechanisms which may be very useful in the field of metal halide perovskite NCs.