RESUMO
Compared to traditional rigid-bodied robots, soft robots are constructed using physically flexible/elastic bodies and electronics to mimic nature and enable novel applications in industry, healthcare, aviation, military, etc. Recently, the fabrication of robots on soft matter with great flexibility and compliance has enabled smooth and sophisticated 'multi-degree-of-freedom' 3D actuation to seamlessly interact with humans, other organisms and non-idealized environments in a highly complex and controllable manner. Herein, we summarize the fabrication approaches, driving strategies, novel applications, and future trends of soft robots. Firstly, we introduce the different fabrication approaches to prepare soft robots and compare and systematically discuss their advantages and disadvantages. Then, we present the actuator-based and material-based driving strategies of soft robotics and their characteristics. The representative applications of soft robotics in artificial intelligence, medicine, sensors, and engineering are summarized. Also, some remaining challenges and future perspectives in soft robotics are provided. This work highlights the recent advances of soft robotics in terms of functional material selection, structure design, control strategies and biomimicry, providing useful insights into the development of next-generation functional soft robotics.
Assuntos
Biomimética , Robótica , Humanos , Inteligência Artificial , EletrônicaRESUMO
Strong, reversible, and self-cleaning adhesion in the toe pads of geckos allow the lizards to climb on a variety of vertical and inverted surfaces, regardless of the surface conditions, whether hydrophobic or hydrophilic, smooth or tough, wet or dry, clean or dirty. Development of synthetic gecko-inspired surfaces has drawn a great attention over the past two decades. Despite many external-stimuli responsive mechanisms (i.e., thermal, electrical, magnetic) have been successfully demonstrated, smart adhesives controlled by light signals still substantially lag behind. Here, in this report, we integrate tetramethylpiperidinyloxyl (TEMPO)-doped polydopamine (PDA), namely, TDPDA, with PDMS micropillars using a template-assisted casting method, to achieve both improved adhesion and self-cleaning performances. To the best of our knowledge, this is the first report on PDA being used as a doping nanoparticle in bioinspired adhesive surfaces to achieve highly efficient self-cleaning controllable by light signals. Notably, the adhesion of the 5% TDPDA-PDMS sample is â¼688.75% higher than that of the pure PDMS at the individual pillar level, which helps to explain the highly efficient self-cleaning mechanism. The sample surfaces (named TDPDA-PDMS) can efficiently absorb 808 nm wavelength of light and heat up from 25 °C to 80.9 °C in 3 min with NIR irradiation. The temperature rise causes significant reduction of adhesion, which results in outstanding self-cleaning rate of up to 55.8% within five steps. The exploration of the photoenabled switching mechanism with outstanding sensitivity may bring the biomimetic smart surfaces into a new dimension, rendering varied applications, e.g., in miniaturized climbing robot, artificial intelligence programmable manipulation/assembly/filtration, active self-cleaning solar panels, including high output sensors and devices in many engineering and biomedical frontiers.
Assuntos
Inteligência Artificial , Lagartos , Adesividade , Adesivos , Animais , BiomiméticaRESUMO
Geckos have adapted to the complicated natural environment with its excellent climbing ability. Current artificial gecko-inspired synthetic adhesives (GSAs) mimic gecko's attach-detach mechanism by creating anisotropic and hierarchical structures. Easy detachment and high self-cleaning capability are still the unsolved problems in GSAs. This study presents an unprecedented photodetachable mechanism of making bioinspired smart surfaces utilizing carbon dot (CD)-doped polydimethylsiloxane (PDMS) composites. Under ultraviolet (UV) irradiation, it could be triggered up to 80.46% reduction of adhesion force between PDMS-CDs bioinspired surfaces and contaminating particles. A load-drag-pull (i.e., LDP) test mimicking gecko's locomotion was adopted to test the dry self-cleaning capabilities of these bioinspired surfaces, where the falling rate of the model contaminates (PS micropellets; average size in diameter â¼8 µm) can reach up to 54.83% after seven repeated steps under UV irradiation. The significantly improved dry self-cleaning capability is attributed to the photothermal effect of CDs inside the PDMS matrix. The mechanism proposed in this work will find its applications in the realms of climbing robots, space adhesive devices, and self-cleaning, advanced gripping technologies for pick and place or assembly.
RESUMO
The current preparation methods of carbon quantum dots (CDs) involve many reaction parameters, which leads to many possibilities in the synthesis processes and high uncertainty of the resultant production performance. Recently, machine learning (ML) methods have shown great potential in correlating the selected features in many applications, which can help understand the relevant structure-function relationships of CDs and discover better synthesis recipes as well. In this work, we employ the ML approach to guide the blue CD synthesis in microwave systems. After optimizing the synthesis parameters and conditions, the quantum yield (QY) increases to about 200% higher than the average value of the prepared samples without ML guidance. The obtained CDs are applied as fluorescent probes to monitor hydrogen peroxide (H2O2) in human teeth. The CD probe exhibits a linear relationship with the concentration of H2O2 ranging from 0 to 1.1 M with a lower detection limit of 0.12 M, which can effectively detect the residual H2O2 after bleaching teeth. This work shows that the adopted ML methods have considerable advantages in guiding the synthesis of high-quality CDs, which could accelerate the development of other novel functional materials in energy, biomedical, and environmental remediation applications.
Assuntos
Pontos Quânticos , Carbono , Corantes Fluorescentes , Humanos , Peróxido de Hidrogênio , Aprendizado de Máquina , Micro-OndasRESUMO
Nature does nothing in vain. Through millions of years of revolution, living organisms have evolved hierarchical and anisotropic structures to maximize their survival in complex and dynamic environments. Many of these structures are intrinsically heterogeneous and often with functional gradient distributions. Understanding the convergent and divergent gradient designs in the natural material systems may lead to a new paradigm shift in the development of next-generation high-performance bio-/nano-materials and devices that are critically needed in energy, environmental remediation, and biomedical fields. Herein, we review the basic design principles and highlight some of the prominent examples of gradient biological materials/structures discovered over the past few decades. Interestingly, despite the anisotropic features in one direction (i.e., in terms of gradient compositions and properties), these natural structures retain certain levels of symmetry, including point symmetry, axial symmetry, mirror symmetry, and 3D symmetry. We further demonstrate the state-of-the-art fabrication techniques and procedures in making the biomimetic counterparts. Some prototypes showcase optimized properties surpassing those seen in the biological model systems. Finally, we summarize the latest applications of these synthetic functional gradient materials and structures in robotics, biomedical, energy, and environmental fields, along with their future perspectives. This review may stimulate scientists, engineers, and inventors to explore this emerging and disruptive research methodology and endeavors.
RESUMO
Designing effective catalysts by controlling morphology and structure is key to improving the energy efficiency of fuel cells. A good understanding of the effects of specific structures on electrocatalytic activity, selectivity, and stability is needed. Here, we propose a facile method to synthesize PtCu bimetallic nanostructures with controllable compositions by using Cu nanowires as a template and ascorbic acid as a reductant. A further annealing process provided the alloy PtCu with tunable crystal structures. The combination of distinct structures with tunable compositions in the form of PtCu nanowires provides plenty of information for better understanding the reaction mechanism during catalysis. HClO4 cyclic voltammetry (CV) tests confirmed that various phase transformations occurred in bimetallic and alloy samples, affecting morphology and unit cell structures. Under a bifunctional synergistic effect and the influence of the insertion of a second metal, the two series of structures show superior performance toward methanol electrooxidation. Typically, the post-product alloy A-Pt14Cu86 with a cubic structure (a = 3.702 Å) has better methanol oxidation reaction (MOR) catalysis performance. Density functional theory (DFT) calculations were performed to determine an optimal pathway using the Gibbs free energy and to verify the dependence of the electrocatalytic performance on the lattice structure via overpotential changes. Bimetallic PtCu has high CO tolerance, maintaining high stability. This work provides an approach for the systematic design of novel catalysts and the exploration of electrocatalytic mechanisms for fuel cells and other related applications.
RESUMO
Growth of large-area, uniform, and high-quality monolayer transition-metal dichalcogenides (TMDs) for practical and industrial applications remains a long-standing challenge. The present study demonstrates a modified predeposited chemical vapor deposition (CVD) process by employing an annealing procedure before sulfurization, which helps in achieving large-area, highly uniform, and high-quality TMDs on various substrates. The annealing procedure resulted in a molten liquid state of the precursors in the CVD process, which not only facilitated a uniform redistribution of the precursor on the substrate (avoid the aggregation) because of the uniform redistribution of the liquid precursor on the substrate but more importantly avoided the undesired multilayer growth via the self-limited lateral supply precursors mechanism. A 2 in. uniform and continuous monolayer WS2 film has been synthesized on the SiO2/Si substrate. Moreover, uniform monolayer WS2 single crystals can be prepared on more general and various substrates including sapphire, mica, quartz, and Si3N4 using the same growth procedure. Besides, this growth mechanism can be generalized to synthesize other monolayer TMDs such as MoS2 and MoS2/WS2 heterostructures. Hence, the present method provides a generalized attractive strategy to grow large-area, uniform, single-layer two-dimensional (2D) materials. This study has significant implications in the advancement of batch production of various 2D-material-based devices for industrial and commercial applications.
RESUMO
Shape engineering plays a crucial role in the application of two-dimensional (2D) layered metal dichalcogenide (LMD) crystalline materials in terms of physical and chemical property modulation. However, controllable growth of 1T phase tin disulfide (SnS2) with multifarious morphologies has rarely been reported and remains challenging. Herein, we report a direct synthesis of large-size, uniform, and atomically thin 1T-SnS2 with multiple morphologies by adding potassium halides via a facile chemical vapor deposition process. A variety of morphologies, i.e., from hexagon, triangle, windmill, and dendritic to coralloid, corresponding to fractal dimensions from 1.01 to 1.81 are accurately controlled by growth conditions. Moreover, the Sn concentration controls the morphology change of SnS2. The edge length of the SnS2 dendritic flake can grow larger than 500 µm in 5 min. Potassium halides can significantly reduce the surface migration barrier of the SnS2 cluster and enhance the SnS2 adhesion force with substrate to facilitate efficient high in-plane growth of monolayer SnS2 compared to sodium halides by density functional theory calculations. More branched SnS2 with higher fractal dimension provides more active sites for enhancing hydrogen evolution reactions. Importantly, we prove that potassium halides are preferable for 1T-phase LMDs structures, while sodium halides are more suitable for 2H-phase materials. The growth mechanism proposed here provides a general approach for controllable-phase synthesis of 2D LMD crystals and related heterostructures. Shape engineering of 2D materials also provides a strategy to tune LMD properties for demanding applications.
RESUMO
Poly(aryloxy)phosphazenes emerge as an important class of hybrid polymers for a whole range of potential applications. To date, however, little is known about the detailed reaction mechanisms during preparation. This draws a great deal of attention for developing well-defined and well-controllable synthesis methods. In this paper, poly(dichlorophosphazene) (PDCP) has been successfully synthesized, and subsequent reaction with sodium phenoxide or phenol in the presence of K2CO3 can produce poly(bis(phenoxy)phosphazene) (PBPP). To elucidate the issues of branching and cross-linking, focuses have been placed on the change of various reaction conditions, in terms of concentration, temperature, time, solvent, catalysis, etc. The product polymers were examined using the techniques of 31P and 13C NMR, GPC, XPS, and FT-IR, in order to characterize the structural defects, in particular, branching and unwanted substitutions, such as addition of water molecules or oxidation of the phosphorus atoms on the backbone of the polymers. This work sheds light on the tailor design of poly(aryloxy)phosphazenes and other polyphosphazenes with more uniform and controllable structures.
RESUMO
Geckos have the extraordinary ability to prevent their sticky feet from fouling while running on dusty walls and ceilings. Understanding gecko adhesion and self-cleaning mechanisms is essential for elucidating animal behaviours and rationally designing gecko-inspired devices. Here we report a unique self-cleaning mechanism possessed by the nano-pads of gecko spatulae. The difference between the velocity-dependent particle-wall adhesion and the velocity-independent spatula-particle dynamic response leads to a robust self-cleaning capability, allowing geckos to efficiently dislodge dirt during their locomotion. Emulating this natural design, we fabricate artificial spatulae and micromanipulators that show similar effects, and that provide a new way to manipulate micro-objects. By simply tuning the pull-off velocity, our gecko-inspired micromanipulators, made of synthetic microfibers with graphene-decorated micro-pads, can easily pick up, transport, and drop-off microparticles for precise assembling. This work should open the door to the development of novel self-cleaning adhesives, smart surfaces, microelectromechanical systems, biomedical devices, and more.