Recent advances in nanoparticulate RNA delivery systems.

Nanoparticle-based RNA delivery has shown great progress in recent years with the approval of two mRNA vaccines for Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) and a liver-targeted siRNA therapy. Here, we discuss the preclinical and clinical advancement of new generations of RNA delivery therapies along multiple axes. Improvements in cargo design such as RNA circularization and data-driven untranslated region optimization can drive better mRNA expression. New materials discovery research has driven improved delivery to extrahepatic targets such as the lung and splenic immune cells, which could lead to pulmonary gene therapy and better cancer vaccines, respectively. Other organs and even specific cell types can be targeted for delivery via conjugation of small molecule ligands, antibodies, or peptides to RNA delivery nanoparticles. Moreover, the immune response to any RNA delivery nanoparticle plays a crucial role in determining efficacy. Targeting increased immunogenicity without induction of reactogenic side effects is crucial for vaccines, while minimization of immune response is important for gene therapies. New developments have addressed each of these priorities. Last, we discuss the range of RNA delivery clinical trials targeting diverse organs, cell types, and diseases and suggest some key advances that may play a role in the next wave of therapies.

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming.

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(ß-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigms via monocyte programming.

Quaternary nanoparticles enable sustained release of bortezomib for hepatocellular carcinoma.

BACKGROUND AND AIMS: Hepatocellular carcinoma (HCC) represents the third leading cause of cancer-related mortality in the world. Over the past two decades, there has been minimal improvement in therapies as well as clinical outcomes for patients with Barcelona Clinic Liver Cancer (BCLC)-B. These patients are treated with local interventions, including transarterial chemoembolization. Current methodologies only allow sustained intratumoral release measured in hours. Methodologies to allow sustained local release of the drug cargo over days to weeks are acutely needed. We hypothesize that tumor response as well as outcomes of patients with BCLC-B can be improved through utilization of a highly cytotoxic agent delivered with a sustained release platform. APPROACH AND RESULTS: High-throughput drug screening across 40 HCC patient-derived organoids identified bortezomib (BTZ) as a highly cytotoxic small molecule for HCC. We designed and manufactured sustained release BTZ nanoparticles (BTZ-NP) using a flash nanocomplexation/nanoprecipitation process. We quantified the release profile and tested the anti-tumoral effects in vivo. The BTZ-NP formulation demonstrated a sustained release of BTZ of 30 days. This BTZ-NP formulation was highly effective in controlling tumor size and improved survival in vivo in three animal models of HCC, including when delivered via the hepatic artery, as we envision its delivery in patients. In addition, the BTZ-NP formulation was superior to treatment with doxorubicin-drug eluting beads. CONCLUSIONS: The BTZ-NP formulation provides a potent and safe treatment of HCC via a localized delivery approach. These results warrant additional preclinical studies to advance this technology to human clinical trials.

Size-Controlled and Shelf-Stable DNA Particles for Production of Lentiviral Vectors.

Polyelectrolyte complex particles assembled from plasmid DNA (pDNA) and poly(ethylenimine) (PEI) have been widely used to produce lentiviral vectors (LVVs) for gene therapy. The current batch-mode preparation for pDNA/PEI particles presents limited reproducibility in large-scale LVV manufacturing processes, leading to challenges in tightly controlling particle stability, transfection outcomes, and LVV production yield. Here we identified the size of pDNA/PEI particles as a key determinant for a high transfection efficiency with an optimal size of 400-500 nm, due to a cellular-uptake-related mechanism. We developed a kinetics-based approach to assemble size-controlled and shelf-stable particles using preassembled nanoparticles as building blocks and demonstrated production scalability on a scale of at least 100 mL. The preservation of colloidal stability and transfection efficiency was benchmarked against particles generated using an industry standard protocol. This particle manufacturing method effectively streamlines the viral manufacturing process and improves the production quality and consistency.

Liter-scale manufacturing of shelf-stable plasmid DNA/PEI transfection particles for viral vector production.

The transfection efficiency and stability of the delivery vehicles of plasmid DNA (pDNA) are critical metrics to ensure high-quality and high-yield production of viral vectors. We previously identified that the optimal size of pDNA/poly(ethylenimine) (PEI) transfection particles is 400-500 nm and developed a bottom-up assembly method to construct stable 400-nm pDNA/PEI particles and benchmarked their transfection efficiency in producing lentiviral vectors (LVVs). Here, we report scale-up production protocols for such transfection particles. Using a two-inlet confined impinging jet (CIJ) mixer with a dual syringe pump set-up, we produced a 1-L batch at a flow rate of 100 mL/min, and further scaled up this process with a larger CIJ mixer and a dual peristaltic pump array, allowing for continuous production at a flow rate of 1 L/min without a lot size limit. We demonstrated the scalability of this process with a 5-L lot and validated the quality of these 400-nm transfection particles against the target product profile, including physical properties, shelf and on-bench stability, transfection efficiency, and LVV production yield in both 15-mL bench culture and 2-L bioreactor runs. These results confirm the potential of this particle assembly process as a scalable manufacturing platform for viral vector production.

Combinatorial development of nebulized mRNA delivery formulations for the lungs.

Inhaled delivery of mRNA has the potential to treat a wide variety of diseases. However, nebulized mRNA lipid nanoparticles (LNPs) face several unique challenges including stability during nebulization and penetration through both cellular and extracellular barriers. Here we develop a combinatorial approach addressing these barriers. First, we observe that LNP formulations can be stabilized to resist nebulization-induced aggregation by altering the nebulization buffer to increase the LNP charge during nebulization, and by the addition of a branched polymeric excipient. Next, we synthesize a combinatorial library of ionizable, degradable lipids using reductive amination, and evaluate their delivery potential using fully differentiated air-liquid interface cultured primary lung epithelial cells. The final combination of ionizable lipid, charge-stabilized formulation and stability-enhancing excipient yields a significant improvement in lung mRNA delivery over current state-of-the-art LNPs and polymeric nanoparticles.

Single-Particle Spectroscopic Chromatography Reveals Heterogeneous RNA Loading and Size Correlations in Lipid Nanoparticles.

Lipid nanoparticles (LNP) have emerged as pivotal delivery vehicles for RNA therapeutics. Previous research and development usually assumed that LNPs are homogeneous in population, loading density, and composition. Such perspectives are difficult to examine due to the lack of suitable tools to characterize these physicochemical properties at the single-nanoparticle level. Here, we report an integrated spectroscopy-chromatography approach as a generalizable strategy to dissect the complexities of multicomponent LNP assembly. Our platform couples cylindrical illumination confocal spectroscopy (CICS) with single-nanoparticle free solution hydrodynamic separation (SN-FSHS) to simultaneously profile population identity, hydrodynamic size, RNA loading levels, and distributions of helper lipid and PEGylated lipid of LNPs at the single-particle level and in a high-throughput manner. Using a benchmark siRNA LNP formulation, we demonstrate the capability of this platform by distinguishing seven distinct LNP populations, quantitatively characterizing size distribution and RNA loading level in wide ranges, and more importantly, resolving composition-size correlations. This SN-FSHS-CICS analysis provides critical insights into a substantial degree of heterogeneity in the packing density of RNA in LNPs and size-dependent loading-size correlations, explained by kinetics-driven assembly mechanisms of RNA LNPs.

Screening for lipid nanoparticles that modulate the immune activity of helper T cells towards enhanced antitumour activity.

Lipid nanoparticles (LNPs) can be designed to potentiate cancer immunotherapy by promoting their uptake by antigen-presenting cells, stimulating the maturation of these cells and modulating the activity of adjuvants. Here we report an LNP-screening method for the optimization of the type of helper lipid and of lipid-component ratios to enhance the delivery of tumour-antigen-encoding mRNA to dendritic cells and their immune-activation profile towards enhanced antitumour activity. The method involves screening for LNPs that enhance the maturation of bone-marrow-derived dendritic cells and antigen presentation in vitro, followed by assessing immune activation and tumour-growth suppression in a mouse model of melanoma after subcutaneous or intramuscular delivery of the LNPs. We found that the most potent antitumour activity, especially when combined with immune checkpoint inhibitors, resulted from a coordinated attack by T cells and NK cells, triggered by LNPs that elicited strong immune activity in both type-1 and type-2 T helper cells. Our findings highlight the importance of optimizing the LNP composition of mRNA-based cancer vaccines to tailor antigen-specific immune-activation profiles.

Payload distribution and capacity of mRNA lipid nanoparticles.

Lipid nanoparticles (LNPs) are effective vehicles to deliver mRNA vaccines and therapeutics. It has been challenging to assess mRNA packaging characteristics in LNPs, including payload distribution and capacity, which are critical to understanding structure-property-function relationships for further carrier development. Here, we report a method based on the multi-laser cylindrical illumination confocal spectroscopy (CICS) technique to examine mRNA and lipid contents in LNP formulations at the single-nanoparticle level. By differentiating unencapsulated mRNAs, empty LNPs and mRNA-loaded LNPs via coincidence analysis of fluorescent tags on different LNP components, and quantitatively resolving single-mRNA fluorescence, we reveal that a commonly referenced benchmark formulation using DLin-MC3 as the ionizable lipid contains mostly 2 mRNAs per loaded LNP with a presence of 40%-80% empty LNPs depending on the assembly conditions. Systematic analysis of different formulations with control variables reveals a kinetically controlled assembly mechanism that governs the payload distribution and capacity in LNPs. These results form the foundation for a holistic understanding of the molecular assembly of mRNA LNPs.

Multi-step screening of DNA/lipid nanoparticles and co-delivery with siRNA to enhance and prolong gene expression.

Lipid nanoparticles hold great potential as an effective non-viral vector for nucleic acid-based gene therapy. Plasmid DNA delivery can result in extended transgene expression compared to mRNA-based technologies, yet there is a lack of systematic investigation into lipid nanoparticle compositions for plasmid DNA delivery. Here, we report a multi-step screening platform to identify optimized plasmid DNA lipid nanoparticles for liver-targeted transgene expression. To achieve this, we analyze the role of different helper lipids and component ratios in plasmid DNA lipid nanoparticle-mediated gene delivery in vitro and in vivo. Compared to mRNA LNPs and in vivo-jetPEI/DNA nanoparticles, the identified plasmid DNA lipid nanoparticles successfully deliver transgenes and mediate prolonged expression in the liver following intravenous administration in mice. By addressing different physiological barriers in a stepwise manner, this screening platform can efficiently down select effective lipid nanoparticle candidates from a lipid nanoparticle library of over 1000 formulations. In addition, we substantially extend the duration of plasmid DNA nanoparticle-mediated transgene expression using a DNA/siRNA co-delivery approach that targets transcription factors regulating inflammatory response pathways. This lipid nanoparticle-based co-delivery strategy further highlights the unique advantages of an extended transgene expression profile using plasmid DNA delivery and offers new opportunities for DNA-based gene medicine applications.

Scalable Purification of Plasmid DNA Nanoparticles by Tangential Flow Filtration for Systemic Delivery.

Plasmid DNA (pDNA) nanoparticles synthesized by complexation with linear polyethylenimine (lPEI) are one of the most effective non-viral gene delivery vehicles. However, the lack of scalable and reproducible production methods and the high toxicity have hindered their clinical translation. Previously, we have developed a scalable flash nanocomplexation (FNC) technique to formulate pDNA/lPEI nanoparticles using a continuous flow process. Here, we report a tangential flow filtration (TFF)-based scalable purification method to reduce the uncomplexed lPEI concentration in the nanoparticle formulation and improve its biocompatibility. The optimized procedures achieved a 60% reduction of the uncomplexed lPEI with preservation of the nanoparticle size and morphology. Both in vitro and in vivo studies showed that the purified nanoparticles significantly reduced toxicity while maintaining transfection efficiency. TFF also allows for gradual exchange of solvents to isotonic solutions and further concentrating the nanoparticles for injection. Combining FNC production and TFF purification, we validated the purified pDNA/lPEI nanoparticles for future clinical translation of this gene nanomedicine.

Nanoparticle-mediated tumor cell expression of mIL-12 via systemic gene delivery treats syngeneic models of murine lung cancers.

Treatment of cancers in the lung remains a critical challenge in the clinic for which gene therapy could offer valuable options. We describe an effective approach through systemic injection of engineered polymer/DNA nanoparticles that mediate tumor-specific expression of a therapeutic gene, under the control of the cancer-selective progression elevated gene 3 (PEG-3) promoter, to treat tumors in the lungs of diseased mice. A clinically tested, untargeted, polyethylenimine carrier was selected to aid rapid transition to clinical studies, and a CpG-free plasmid backbone and coding sequences were used to reduce inflammation. Intravenous administration of nanoparticles expressing murine single-chain interleukin 12, under the control of PEG-3 promoter, significantly improved the survival of mice in both an orthotopic and a metastatic model of lung cancer with no marked symptoms of systemic toxicity. These outcomes achieved using clinically relevant nanoparticle components raises the promise of translation to human therapy.

Flow physics and mixing quality in a confined impinging jet mixer.

Due to their ability to provide efficient mixing at small scales, confined impinging jet mixers (CIJMs) are employed widely in nanoparticle assembly processes such as flash nanoprecipitation and flash nanocomplexation, which require rapid mixing. In this mixing device, two jets from opposite directions impinge directly on each other forming a thin shear layer that breaks down rapidly into small flow structures. This enables effective mixing of the species transported by each jet by drastically reducing the diffusion distance. In the present study, the mixing performance of a commonly used cylindrical CIJM is examined by direct numerical simulations. Analysis of the simulation results indicates that the interaction of the shear layer with the inner walls of the CIJM is critical in inducing a range of instabilities in the impinging jet flow. By examining flow structures, statistical quantities, and metrics, we have characterized and quantified the mixing quality of a binary mixture in the CIJM. Product uniformity in processes such as precipitation and complexation is expected to depend on the residence time of the constituents, and this quantity is also calculated and compared for the cases with different jet Reynolds numbers. The jet Reynolds numbers of Re = 200, 600, and 1000 are considered, and the simulation results show that the CIJM achieves very good mixing for the Re = 600 and Re = 1000 cases. It is also found that the Re = 600 case performs slightly better than the other cases in terms of uniformity of the residence time. These quantitative analyses offer useful insights into the mechanism of nanoparticle size control and uniformity afforded by the unique flow physics and mixing characteristics in the CIJMs.

Surface-Functionalized PEGylated Nanoparticles Deliver Messenger RNA to Pulmonary Immune Cells.

Nanoparticles designed as messenger RNA (mRNA) carriers to deliver gene medicine have shown great potential to change the way lung disease states are managed. Controlling their delivery to the lung and the transgene expression in a specific population of cells remains a challenge. Here, we developed a series of nanoparticles with polyethylene glycol (PEG) corona prepared by condensing mRNA with PEG-grafted-polyethyleneimine (PEI-g-PEG) with different PEG terminal functional groups and grafting ratios. PEGylated nanoparticles (PEG grafting ratio was 0.5%) with amino or amino acid terminal groups showed the highest transgene expression levels in the lung following systemic administration, and cell profiling analysis indicated that pulmonary immune cells contributed to the majority of expression. We also showed that these nanoparticles can be prepared by the flash nanocomplexation method, which is a scalable and reproducible process, yielding lyophilizable nanoparticles that were stable for at least 4 months at -20 °C. These results suggest that these surface-functionalized PEGylated nanoparticles may serve as desirable carriers to deliver mRNA to the lung for pulmonary immunomodulation.

A polyphenol-metal nanoparticle platform for tunable release of liraglutide to improve blood glycemic control and reduce cardiovascular complications in a mouse model of type II diabetes.

Liraglutide is a GLP-1 receptor agonist recently approved for Type-II diabetes (T2D) treatment with superior hypoglycemic effect while also improving cardiovascular function for the patients. However, its application has been limited by its short half-life (~13 h), which requires daily injections to maintain effective drug concentrations in blood, thus increasing the risk of poor patient compliance and complications. In this study, we developed a ternary liraglutide/tannic acid (TA)/Al3+ nanoparticle system based on hydrogen bond formation between liraglutide and TA and stabilized by complex coordination interaction between TA and Al3+. This ternary nanoparticle formulation offers sustained release of liraglutide for >8 days by optimizing the concentration of TA during nanoparticle assembly. A flash nanocomplexation (FNC) process was adopted to confer homogeneous mixing of the three components and control the assembly kinetics, thus enabling efficient encapsulation, a tunable drug release profile, improved nanoparticle size uniformity, and a high degree of colloidal stability. Upon a single intraperitoneal (i.p.) administration, the optimized formulation effectively lowered the high blood glucose level in a T2D db/db mice model to the normal range (8-10 mmol/L) within 6 h, maintained it for 60 more hours, and kept it lower than the original level for >6 days. In a 30-day treatment study, the nanoparticle formulation with a dosage frequency of once every 5 days exhibited similar or better control of blood sugar level (20% reduction in HbA1c) and weight control than daily injection of free liraglutide at the same treatment dose. The extended glycemic control led to distinctive improvements on reducing cardiomyopathy, including inhibition in lipo-toxicity by decreasing 40% of triglyceride, 30% of diacylglycerol and 50% of PKC level in the heart, as well as ameliorating oxidative stress and cell apoptosis activities through positive regulation on superoxidase, malondialdehyde, caspase-3 and Bax. This nanoparticle system demonstrates improved therapeutic potential owing to its long-acting glycemic control with improved cardiovascular function and reduced tissue toxicity in multiple organs.

Sustained release of exendin-4 from tannic acid/Fe (III) nanoparticles prolongs blood glycemic control in a mouse model of type II diabetes.

Exendin-4 has been clinically adopted as an effective drug for treating type 2 diabetes (T2D), but its short circulation half-life in the blood requires two injections per day to maintain effective glycemic control. This significantly limits its clinical application. In this study, we developed a tannic acid/exendin-4/Fe3+ ternary nanoparticle system to provide sustained release of exendin-4 in vivo. The formation of these nanoparticles relies on TA/exendin-4 complexation and stabilization through TA-Fe3+ coordination, where the rapid reaction kinetics can benefit from efficient mixing of all three components. Adapting our recently developed flash nanocomplexation (FNC) method, we formulated nanoparticles with high encapsulation efficiency (~ 100%) of exendin-4, high payload capacity, and high degrees of uniformity and stability because the rapid turbulent mixing facilitated a homogeneous distribution of all three components in the complexation process. Intraperitoneal injection in mice showed that exendin-4 released from the nanoparticles had an AUC 7.2-fold higher than the free exendin-4 injection. Efficacy study in a T2D mouse model showed that the optimized formulation achieved a rapid reduction of the blood glucose level to the normal range within <12 h and maintained the same level for 72 h following a single intraperitoneal dose. The blood glucose level was maintained to below the therapeutic level (< 15 mmol/L) for 6 days, and the treatment led to reduced body weight with pathological and functional improvements in the kidney and liver. This tannic acid/exendin-4/Fe3+ ternary nanoparticle system holds translational potential in treating T2D, due to its improved treatment outcomes in terms of extended release of exendin-4, prolonged control of blood glucose level, reduced dosing frequency, and improved pathological indicators.

Kinetic Control in Assembly of Plasmid DNA/Polycation Complex Nanoparticles.

Polyelectrolyte complex (PEC) nanoparticles assembled from plasmid DNA (pDNA) and polycations such as linear polyethylenimine (lPEI) represent a major nonviral delivery vehicle for gene therapy tested thus far. Efforts to control the size, shape, and surface properties of pDNA/polycation nanoparticles have been primarily focused on fine-tuning the molecular structures of the polycationic carriers and on assembly conditions such as medium polarity, pH, and temperature. However, reproducible production of these nanoparticles hinges on the ability to control the assembly kinetics, given the nonequilibrium nature of the assembly process and nanoparticle composition. Here we adopt a kinetically controlled mixing process, termed flash nanocomplexation (FNC), that accelerates the mixing of pDNA solution with polycation lPEI solution to match the PEC assembly kinetics through turbulent mixing in a microchamber. This achieves explicit control of the kinetic conditions for pDNA/lPEI nanoparticle assembly, as demonstrated by the tunability of nanoparticle size, composition, and pDNA payload. Through a combined experimental and simulation approach, we prepared pDNA/lPEI nanoparticles having an average of 1.3 to 21.8 copies of pDNA per nanoparticle and average size of 35 to 130 nm in a more uniform and scalable manner than bulk mixing methods. Using these nanoparticles with defined compositions and sizes, we showed the correlation of pDNA payload and nanoparticle formulation composition with the transfection efficiencies and toxicity in vivo. These nanoparticles exhibited long-term stability at -20 °C for at least 9 months in a lyophilized formulation, validating scalable manufacture of an off-the-shelf nanoparticle product with well-defined characteristics as a gene medicine.

Scalable production of core-shell nanoparticles by flash nanocomplexation to enhance mucosal transport for oral delivery of insulin.

Scalable manufacturing continues to present a major barrier for clinical translation of nanotherapeutics. Methods available for fabricating protein-encapsulating nanoparticles in a scalable fashion are scarce. Protein delivery often requires multiple functionalities to be incorporated into the same vehicle. Specifically for nanoparticle-mediated oral delivery of protein therapeutics, protection in GI tract, site-specific release, facilitating transmucosal permeation, and enhancing epithelial transport are a few desirable features to be engineered into a nanoparticle system. Here we devised a sequential flash nanocomplexation (FNC) technique for the scalable production of a core-shell structured nanoparticle system by combining materials choice and particle size and structure to fulfill these functions, therefore enhancing the delivery efficiency of insulin. This method is highly effective in controlling the size, generating core-shell structure with high encapsulation efficiency (97%) and payload capacity (67%) using insulin/l-penetratin complex nanoparticles as a core coated with hyaluronic acid (HA). Both the in vitro and in vivo models confirmed that the HA coating on these core-shell nanoparticles enhanced the permeation of nanoparticles through the intestinal mucus layer and improved trans-epithelial absorption of insulin nanoparticles; and the enhancement effect was most prominent using HA with the highest average molecular weight. The insulin-loaded nanoparticles were then encapsulated into enteric microcapsules (MCs) in an FNC process to provide additional protection against the acidic environment in the stomach while allowing rapid release of insulin nanoparticles when they reach small intestine. The optimized multifunctional MCs delivered an effective glucose reduction in a Type I diabetes rat model following a single oral administration, yielding a relative bioavailability of 11% in comparison with subcutaneous injection of free-form insulin. This FNC technique is highly effective in controlling particle size and structure to improve delivery properties and function. It can be easily extended to oral delivery for other protein therapeutics.

Size-controlled lipid nanoparticle production using turbulent mixing to enhance oral DNA delivery.

Lipid-based nanoparticles (LNPs) have been developed to address the transport and uptake barriers to enhance the delivery efficiency of plasmid DNA therapeutics. In these systems, plasmid DNA can be encapsulated through condensation by a cationic lipid to form lipo-complexes, or polycation following complexation into cationic liposomes to form lipo-polyplexes. Conventional methods for achieving these two DNA-delivering LNP vehicles suffer from significant batch-to-batch variation, poor scalability and complicated multi-step preparation procedures. Resultant nanoparticles often have uncontrollable size and surface charge with wide distribution, and poor stability when exposed to physiological media. Here we report a single-step flash nanocomplexation (FNC) process using turbulent mixing to prepare uniform lipo-complex or lipo-polyplex LNPs in a scalable manner, demonstrating excellent control over the nanoparticle size (from 40 to several hundred nm) and surface charge, with narrow size distribution. The FNC-produced LNPs could be purified and concentrated using a tangential flow filtration (TFF) process in a scalable manner. An optimized formulation of purified lipo-complex LNPs (DOTAP/Chol/DNA, 45 nm) showed significantly higher (5-fold in the lungs and 4-fold in the liver) transgene expression activity upon oral dosage than lipo-polyplex LNPs (DPPC/Chol/lPEI/DNA, 75 nm) or lPEI/DNA nanoparticles (43 nm). Repeated dosing (4 days, 150 µg/day) of the lipo-complex LNPs sustained the transgene activity over a period of one week without detectable toxicity in major organs, suggesting its potential for clinical translation. STATEMENT OF SIGNIFICANCE: We report a new method to prepare uniform size-controlled lipid-based DNA-loaded nanoparticles by turbulent mixing delivered by a multi-inlet vortex mixer. Two distinct compositions were successfully prepared: (1) lipo-complexes, through condensation of the plasmid DNA by cationic lipids; (2) lipo-polyplexes, by encapsulation of DNA/PEI together with neutral lipids. Comparing with conventional methods, which use multi-step processes with high batch-to-batch variations and poor control over nanoparticle characteristics, this method offers a single-step, continuous and reproducible assembly methodology that would promote the translation of such gene medicine products. Effective purification and concentration of nanoparticles were achieved by adopted tangential flow filtration method. Following oral gavage in mice, the lipo-complex nanoparticles showed the highest level of transgene expression in the lung and liver.

Scalable fabrication of size-controlled chitosan nanoparticles for oral delivery of insulin.

Controlled delivery of protein would find diverse therapeutic applications. Formulation of protein nanoparticles by polyelectrolyte complexation between the protein and a natural polymer such as chitosan (CS) is a popular approach. However, the current method of batch-mode mixing faces significant challenges in scaling up while maintaining size control, high uniformity, and high encapsulation efficiency. Here we report a new method, termed flash nanocomplexation (FNC), to fabricate insulin nanoparticles by infusing aqueous solutions of CS, tripolyphosphate (TPP), and insulin under rapid mixing condition (Re > 1600) in a multi-inlet vortex mixer. In comparison with the bulk-mixing method, the optimized FNC process produces CS/TPP/insulin nanoparticles with a smaller size (down to 45 nm) and narrower size distribution, higher encapsulation efficiency (up to 90%), and pH-dependent nanoparticle dissolution and insulin release. The CS/TPP/insulin nanoparticles can be lyophilized and reconstituted without loss of activity, and produced at a throughput of 5.1 g h-1 when a flow rate of 50 mL min-1 is used. Evaluated in a Type I diabetes rat model, the smaller nanoparticles (45 nm and 115 nm) control the blood glucose level through oral administration more effectively than the larger particles (240 nm). This efficient, reproducible and continuous FNC technique is amenable to scale-up in order to address the critical barrier of manufacturing for the translation of protein nanoparticles.