Rechargeable Na/Cl2 and Li/Cl2 batteries.

Lithium-ion batteries (LIBs) are widely used in applications ranging from electric vehicles to wearable devices. Before the invention of secondary LIBs, the primary lithium-thionyl chloride (Li-SOCl2) battery was developed in the 1970s using SOCl2 as the catholyte, lithium metal as the anode and amorphous carbon as the cathode1-7. This battery discharges by lithium oxidation and catholyte reduction to sulfur, sulfur dioxide and lithium chloride, is well known for its high energy density and is widely used in real-world applications; however, it has not been made rechargeable since its invention8-13. Here we show that with a highly microporous carbon positive electrode, a starting electrolyte composed of aluminium chloride in SOCl2 with fluoride-based additives, and either sodium or lithium as the negative electrode, we can produce a rechargeable Na/Cl2 or Li/Cl2 battery operating via redox between mainly Cl2/Cl- in the micropores of carbon and Na/Na+ or Li/Li+ redox on the sodium or lithium metal. The reversible Cl2/NaCl or Cl2/LiCl redox in the microporous carbon affords rechargeability at the positive electrode side and the thin alkali-fluoride-doped alkali-chloride solid electrolyte interface stabilizes the negative electrode, both are critical to secondary alkali-metal/Cl2 batteries.

Shedding light on rechargeable Na/Cl2 battery.

Advancing new ideas of rechargeable batteries represents an important path to meeting the ever-increasing energy storage needs. Recently, we showed rechargeable sodium/chlorine (Na/Cl2) (or lithium/chlorine Li/Cl2) batteries that used a Na (or Li) metal negative electrode, a microporous amorphous carbon nanosphere (aCNS) positive electrode, and an electrolyte containing dissolved aluminum chloride and fluoride additives in thionyl chloride [G. Zhu et al., Nature 596, 525-530 (2021) and G. Zhu et al., J. Am. Chem. Soc. 144, 22505-22513 (2022)]. The main battery redox reaction involved conversion between NaCl and Cl2 trapped in the carbon positive electrode, delivering a cyclable capacity of up to 1,200 mAh g-1 (based on positive electrode mass) at a ~3.5 V discharge voltage [G. Zhu et al., Nature 596, 525-530 (2021) and G. Zhu et al., J. Am. Chem. Soc. 144, 22505-22513 (2022)]. Here, we identified by X-ray photoelectron spectroscopy (XPS) that upon charging a Na/Cl2 battery, chlorination of carbon in the positive electrode occurred to form carbon-chlorine (C-Cl) accompanied by molecular Cl2 infiltrating the porous aCNS, consistent with Cl2 probed by mass spectrometry. Synchrotron X-ray diffraction observed the development of graphitic ordering in the initially amorphous aCNS under battery charging when the carbon matrix was oxidized/chlorinated and infiltrated with Cl2. The C-Cl, Cl2 species and graphitic ordering were reversible upon discharge, accompanied by NaCl formation. The results revealed redox conversion between NaCl and Cl2, reversible graphitic ordering/amorphourization of carbon through battery charge/discharge, and probed trapped Cl2 in porous carbon by XPS.

A high-performance potassium metal battery using safe ionic liquid electrolyte.

Potassium secondary batteries are contenders of next-generation energy storage devices owing to the much higher abundance of potassium than lithium. However, safety issues and poor cycle life of K metal battery have been key bottlenecks. Here we report an ionic liquid electrolyte comprising 1-ethyl-3-methylimidazolium chloride/AlCl3/KCl/potassium bis(fluorosulfonyl) imide for safe and high-performance batteries. The electrolyte is nonflammable and exhibits a high ionic conductivity of 13.1 mS cm-1 at room temperature. A 3.6-V battery with K anode and Prussian blue/reduced graphene oxide cathode delivers a high energy and power density of 381 and 1,350 W kg-1, respectively. The battery shows an excellent cycling stability over 820 cycles, retaining ∼89% of the original capacity with high Coulombic efficiencies of ∼99.9%. High cyclability is also achieved at elevated temperatures up to 60 °C. Uniquely, robust K, Al, F, and Cl-containing passivating interphases are afforded with this electrolyte, which is key to superior battery cycling performances.

High-Capacity Rechargeable Li/Cl2 Batteries with Graphite Positive Electrodes.

Developing new types of high-capacity and high-energy density rechargeable batteries is important to future generations of consumer electronics, electric vehicles, and mass energy storage applications. Recently, we reported ∼3.5 V sodium/chlorine (Na/Cl2) and lithium/chlorine (Li/Cl2) batteries with up to 1200 mAh g-1 reversible capacity, using either a Na or a Li metal as the negative electrode, an amorphous carbon nanosphere (aCNS) as the positive electrode, and aluminum chloride (AlCl3) dissolved in thionyl chloride (SOCl2) with fluoride-based additives as the electrolyte [Zhu et al., Nature, 2021, 596 (7873), 525-530]. The high surface area and large pore volume of aCNS in the positive electrode facilitated NaCl or LiCl deposition and trapping of Cl2 for reversible NaCl/Cl2 or LiCl/Cl2 redox reactions and battery discharge/charge cycling. Here, we report an initially low surface area/porosity graphite (DGr) material as the positive electrode in a Li/Cl2 battery, attaining high battery performance after activation in carbon dioxide (CO2) at 1000 °C (DGr_ac) with the first discharge capacity ∼1910 mAh g-1 and a cycling capacity up to 1200 mAh g-1. Ex situ Raman spectroscopy and X-ray diffraction (XRD) revealed the evolution of graphite over battery cycling, including intercalation/deintercalation and exfoliation that generated sufficient pores for hosting LiCl/Cl2 redox. This work opens up widely available, low-cost graphitic materials for high-capacity alkali metal/Cl2 batteries. Lastly, we employed mass spectrometry to probe the Cl2 trapped in the graphitic positive electrode, shedding light into the Li/Cl2 battery operation.

Supplementation of exogenous lipids via liposomes improves coral larvae settlement post-cryopreservation and nano-laser warming.

Coral reefs worldwide are receding because of detrimental human activities, and cryopreservation of coral larvae would ensure that their genetic biodiversity is not irremediably lost. In recent years, the vitrification and laser warming of coral propagules has demonstrated promising results. During cryopreservation, cellular membranes undergo substantial reconfigurations that may affect survival. Fat enrichment may alter the physical proprieties of cell membranes and improve resistance to low temperatures. Therefore, the aim of this study was to determine whether supplementation of exogenous lipids using liposomes would improve cryosurvival and further development of the vitrified and laser-warmed coral larvae of Seriatopora caliendrum and Pocillopora verrucosa. A vitrification solution (VS) composed of 2 M ethylene glycol (EG), 1 M propylene glycol (PG), 40% (w/v) Ficoll, and 10% gold nanoparticles (at a final concentration of 1.2 × 1018 particles/m3 and an optimised emission wavelength of 535 nm) was chosen. Coral larvae were subjected to vitrification with VS incorporating one of four lipid classes: phosphatidylcholine (PC), phosphatidylethanolamine (PE), erucic acid (EA), and linoleic acid (LA). Warming was achieved using a single laser pulse (300 V, 10 ms pulse width, 2 mm laser beam diameter). A significantly higher vitality rate was observed in S. caliendrum larvae subjected to vitrification and laser warming with EA-incorporated VS, and P. verrucosa larvae vitrified and laser warmed using PE-incorporated VS achieved a significantly higher settlement rate. Our study demonstrated that supplementation of exogenous lipids with liposomes enhances coral larvae cryotolerance and improves cryopreservation outcomes. Lipid enrichment may play a key role in cryobanking coral propagules, and in propagule development after thawing.

Utilizing AgNPt-SALDI to Classify Edible Oils by Multivariate Statistics of Triacylglycerol Profile.

Edible oils are valuable sources of nutrients, and their classification is necessary to ensure high quality, which is essential to food safety. This study reports the establishment of a rapid and straightforward SALDI-TOF MS platform used to detect triacylglycerol (TAG) in various edible oils. Silver nanoplates (AgNPts) were used to optimize the SALDI samples for high sensitivity and reproducibility of TAG signals. TAG fingerprints were combined with multivariate statistics to identify the critical features of edible oil discrimination. Eleven various edible oils were discriminated using principal component analysis (PCA). The results suggested the creation of a robust platform that can examine food adulteration and food fraud, potentially ensuring high-quality foods and agricultural products.

Influence of the Silver Nanocrystal Shape on the Luminous Efficiency of Blue-Emitting Polymer Light-Emitting Diodes.

Truncated silver nanodecahedrons (TAgNDs) and truncated silver nanoplates (TAgNPs) fabricated via chemical reduction and photochemical methods were added to poly[3,4-ethylenedioxythiophene]:poly[styrenesulfonate] (PEDOT:PSS) as dopants to promote the luminous efficiency of blue-emitting polymer light-emitting diodes (PLEDs). The differences in shape between TAgNDs and TAgNPs result in better dispersion of TAgNDs in PEDOT:PSS. Therefore, at an optimal doping concentration (the distributed density in the light-emitting region is 6.88 µg cm-2 for TAgNDs and 5.16 µg cm-2 for TAgNPs), the average current efficacy and maximum electroluminescence intensity enhancement factor for TAgND-doped PLEDs were 4.18 cd A-1 and 420%, respectively, which are much higher than those for TAgNP-doped PLEDs (1.83 cd A-1 and 200%) at a luminescence wavelength of 440 nm.

Efficacy improvement in polymer LEDs via silver-nanoparticle doping in the emissive layer.

The coupling of surface plasmons and excitons in the emissive layer (EML) can improve the performance of polymer light-emitting diodes (PLEDs). Silver nanoparticles (Ag-NPs) with a decahedron structure are prepared by the chemical reduction and photochemical methods and doped directly into the EML after the phase-transfer process. The surface plasmon resonance effect of Ag-NPs, which makes full use of quenched excitons and increases the efficiency of excitons in the EML in a PLED, enhances the current efficacy by a factor of 75 relative to that of the undoped reference device (from 0.22 to 16.64 cd/A). These results demonstrate that Ag-NPs can assist in simple and low-cost fabrication of high-performance polymer optoelectronic devices.

One-Pot Synthesis of Icosahedral Silver Nanoparticles by Using a Photoassisted Tartrate Reduction Method under UV Light with a Wavelength of 310†nm.

A photoassisted citrate reduction reaction under blue LEDs is an easy and highly reproducible method to synthesize high-yield decahedral silver nanoparticles (AgNPs) in the absence of seeds in the initial photochemical reaction. In this study, icosahedral AgNPs with sizes of 80 to 150 nm could be synthesized by using the photoassisted tartrate reduction method under UV light with a wavelength of λ=(310±12) nm. The product yield of icosahedral AgNPs is higher than 90 %. SAED (selected-area electron diffraction) patterns and XRD (X-ray diffraction) spectra show that these AgNPs have multiply twinned structures. High-resolution TEM and dark-field TEM show that the facet of the triangular planes of these icosahedral AgNPs is {111}. This is the first report of icosahedral AgNPs synthesized by using a seed-free photochemical method. SERS (surface-enhanced Raman scattering) of Crystal Violet (CV) measurements show that the as-prepared icosahedral AgNP colloids have excellent SERS enhancement factors, which are approximately four and six times the enhancement factors of decahedral AgNP colloids and thermal-citrate-reduction AgNP colloids, respectively.

Influence of Temperature on the Formation of Silver Nanoparticles by using a Seed-Free Photochemical Method under Sodium-Lamp Irradiation.

Silver nanoparticles can be prepared by using a seed-free photo-assisted citrate reduction method under the irradiation of a sodium lamp. Under the same irradiation intensity, bath temperatures are crucial in influencing the reaction rate, morphologies of final products, and shape evolution of the silver nanostructures. For example, when the bath temperature is 80 °C, the product yields of silver nanoplates, nanorods, and nanodecahedra are 38±6 %, 35±10 %, and 12±8 %, respectively. However, when the bath temperature is 30 °C, the product yields of silver nanoplates, nanorods, and nanodecahedra are 6±3 %, 0 %, and 83±16 %, respectively. Time-dependent UV/Vis spectra and TEM images show that silver nanoplates were formed at the earlier reaction stage and greatly decreased in amount at the later stage when the bath temperatures are less than or equal to 40 °C. This indicates that the silver nanoplates, which can be regarded as intermediates, are kinetically favored products. They are not thermodynamically favored products at these relatively low bath temperatures. The SERS spectra of crystal violet (CV) show that all the silver colloids synthesized at various temperatures exhibit good enhancement factors and that the colloids prepared at lower bath temperatures have a higher enhancement factor.

[B Cell Activating Transcription Factor Regulates Acute Airway Inflammation in Asthmatic Mice].

OBJECTIVE: To investigate the regulatory effect of B cell activating transcription factor (BATF) on acute airway inflammation and its association with retinoic acid orphan nuclear receptors gammat (RORyt) in asthmatic mice. METHODS: 24 female BALB/c mice were randomly and equally divided into three groups (n 8): normal saline (NS) treated, asthma (AS) control and dexamethasone (DEX) treated. AS mice were sensitized and challenged with OVA to establish murine asthma model. Histological changes in lung tissues of the mice were observed by HE staining. Numbers of white blood cell (WBC), polymorphonuclear leukocyte (PMN) and eosinophils (EOS) in the bronchoalveolar lavage fluid (BALF) of the mice were counted. The concentration of interleukin-17 (IL-17) in BALF was measured by ELISA. Quantitative real-time PCR (RT-PCR) was performed to assess the mRNA expressions of BATF, IL-17 and RORγt in the lung tissues. RESULTS: The HE staining showed a higher level of inflammatory cell infiltration around the bronchi of AS mice compared with those treated with NS, predominantly in the forms of EOS, PMN and lymphocytes. The AS and DEX treated mice had higher levels of EOS, PMN, WBC and mRNA expressions of BATF, IL-17 and RORγt in BALF than those treated with NS (P < 0.05). DEX reduced the levels of EOS, PMN, WBC and IL-17 in BALF significantly (P < 0.05). The mRNA expression of BATF in lung tissues of mice was positively correlated with the expression of IL-17, RORγt and the counts of WBC,EOS and PMN in BALF (P < 0.05). CONCLUSION: Asthmatic mice have increased expressions of BATF, IL-17 and RORγt in bronchial and lung tissues. BATF can, through regulating the secretion of Th17 cells, readjust the airway inflammatory. The regulatory function may take effect through synergy with RORγt .

Rechargeable Li/Cl2 Battery Down to -80 °C.

Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions, and space explorations. Here, this work reports 3.5-4 V rechargeable lithium/chlorine (Li/Cl2 ) batteries operating down to -80 °C, employing Li metal negative electrode, a novel carbon dioxide (CO2 ) activated porous carbon (KJCO2 ) as the positive electrode, and a high ionic conductivity (≈5-20 mS cm-1 from -80 °C to room-temperature) electrolyte comprised of aluminum chloride (AlCl3 ), lithium chloride (LiCl), and lithium bis(fluorosulfonyl)imide (LiFSI) in low-melting-point (-104.5 °C) thionyl chloride (SOCl2 ). Between room-temperature and -80 °C, the Li/Cl2 battery delivers up to ≈29 100-4500 mAh g-1 first discharge capacity (based on carbon mass) and a 1200-5000 mAh g-1 reversible capacity over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy probe Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At -80 °C, Cl2 /SCl2 /S2 Cl2 generated by electro-oxidation in the charging step are trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ≈4 V with up to ≈1000 mAh g-1 capacity for SCl2 /S2 Cl2 reduction and up to ≈4000 mAh g-1 capacity at ≈3.1 V plateau for Cl2 reduction.

The effect of photolysis of sodium citrate treated with gold chloride using coloured light on the generation of gold nanoparticles and the repression of WiDr colon cancer cells.

Gold nanoparticles (GNPs) are usually formed via a wet chemical method using gold (III) chloride trihydrate (GC), which is treated with stable reducing agents such as sodium citrate (SC). This study determines the effect of coloured light on the formation of GNPs by irradiation of SC after the addition of GC (SCGC) and the effect of the SCGC photolytic procedure on the suppression of WiDr colon cancer cells by forming reactive oxygen species. The absorbance of surface plasmon resonance peaks at 523 nm are 0.069 and 0.219 for SCGC when treated with blue light illumination (BLI) and violet light irradiation (VLI), respectively, whereas green and red light treatments have little or no effect. Most GNPs have diameters ranging from 3 to 15 nm, with a mean of 6 nm, when SCGC is exposed to VLI for 1.5 h. Anionic superoxide radicals (O2•-) are formed in a charge-transfer process after SCGC under VLI treatment; however, BLI treatment produces no significant reaction. Moreover, SCGC under VLI treatment proves to be considerably more effective at inhibiting WiDr cells than BLI treatment, as firstly reported in this study. The reduction rates for WiDr cells treated with SCGC under BLI and VLI at an intensity of 2.0 mW/cm2 for 1.5 h (energy dose, 10.8 J/cm2) are 4.1% and 57.7%, respectively. The suppression rates for WiDr cells treated with SCGC are inhibited in an irradiance-dependent manner, the inhibition percentages being 57.7%, 63.3%, and 80.2% achieved at VLI intensities of 2.0, 4.0, and 6.0 mW/cm2 for 1.5 h, respectively. Propidium iodide is a fluorescent dye that detects DNA changes after cell death. The number of propidium iodide-positive nuclei significantly increases in WiDr cells treated with SCGC under VLI, suggesting that SCGC photolysis under VLI is a potential treatment option for the photodynamic therapy process.

Novel Long-Term Cryo-Storage Using Vitrification and Laser Warming Techniques.

Vitrification and laser warming have gained popularity over the traditional convective warming techniques in cryopreservation. Laser warming is rapid with uniform effects, thus preventing ice crystal formation in samples. Contemporary laser warming studies have focused on proof-of-concept experiments. Yet, no protocols or techniques have been developed to address the problem of warming samples from long-term storage. Herein, a new approach to laser warming samples without exposing the samples to ambient temperature is introduced. The new device presented has a mean laser-hitting accuracy of 76% ± 16% and a rewarming rate of 59% ± 25% on samples with <1 µL in volume. Although these rates depend on the choice of vitrification solution and mastery of the technique, the approach described represents a successful first step toward laser warming samples from long-term cryo-storage.

Refined Techniques for Enabling Long-Term Cryo-Repository Using Vitrification and Laser Warming.

Vitrification and ultrarapid laser warming are crucial for the cryopreservation of animal embryos, oocytes, and other cells of medicinal, genetic, and agricultural value. In the present study, we focused on alignment and bonding techniques for a special cryojig that combines a jig tool and jig holder into one piece. This novel cryojig was used to obtain a high laser accuracy of 95% and a successful rewarming rate of 62%. The experimental results indicated that our refined device improved laser accuracy in the warming process after long-term cryo-storage through vitrification. We anticipate that our findings will lead to cryobanking applications that use vitrification and laser nanowarming to preserve cells and tissues from a wide range of species.

Shape Dependence of Silver-Nanoparticle-Mediated Synthesis of Gold Nanoclusters with Small Molecules as Capping Ligands.

In this study, differently shaped silver nanoparticles used for the synthesis of gold nanoclusters with small capping ligands were demonstrated. Silver nanoparticles provide a reaction platform that plays dual roles in the formation of Au NCs. One is to reduce gold ions and the other is to attract capping ligands to the surface of nanoparticles. The binding of capping ligands to the AgNP surface creates a restricted space on the surface while gold ions are being reduced by the particles. Four different shapes of AgNPs were prepared and used to examine whether or not this approach is dependent on the morphology of AgNPs. Quasi-spherical AgNPs and silver nanoplates showed excellent results when they were used to synthesize Au NCs. Spherical AgNPs and triangular nanoplates exhibited limited synthesis of Au NCs. TEM images demonstrated that Au NCs were transiently assembled on the surface of silver nanoparticles in the method. The formation of Au NCs was observed on the whole surface of the QS-AgNPs if the synthesis of Au NCs was mediated by QS-AgNPs. In contrast, formation of Au NCs was only observed on the edges and corners of AgNPts if the synthesis of Au NCs was mediated by AgNPts. All of the synthesized Au NCs emitted bright red fluorescence under UV-box irradiation. The synthesized Au NCs displayed similar fluorescent properties, including quantum yields and excitation and emission wavelengths.

The Spectral Response of the Dual Microdisk Resonator Based on BaTiO3 Resistive Random Access Memory.

With the resistive random access memory (ReRAM) devices based on the Al/BaTiO3 (BTO)/ITO structure fabricated at hand, by cross-analyzing the resistive memory characteristics in terms of various barium titanate (BTO) film thicknesses, it is found that the device with 60 nm thick BTO can be switched more than 425 times, while the corresponding SET/RESET voltage, the on-off ratio, and the retention time are -0.69 V/0.475 V, 102, and more than 104 seconds, respectively. Furthermore, the aforementioned ReRAM with a low switching voltage and low power consumption is further integrated with a waveguide resonator in the form of a dual microdisk aligned in a parallel fashion. As the separation gap between the two microdisks is fixed at 15 µm, the ReRAM-mediated dual disk resonator would render a 180° phase reversal between the spectral outputs of the through-port and drop-port. If the gap is shortened to 10 and 5 µm, the expected phase reversal could also be retrieved due to the selective combinations of different memory states associated with each of the two ReRAM microdisks as witnessed by a series of characterization measurements.

Physical Properties and the Reconstruction of Unstable Decahedral Silver Nanoparticles Synthesized Using Plasmon-Mediated Photochemical Process.

Plasmon-mediated shape transformation from quasi-spherical silver nanoparticles (AgNPs) to silver nanoprisms (AgNPrs) and decahedral silver nanoparticles (D-AgNPs) under irradiation of blue LEDs (λ = 456 ± 12 nm, 80 mW/cm2) was studied at temperatures ranging between 60, 40, 30, 20, 10, and 0 °C. It was found that reaction temperature affected transformation rates and influenced the morphology distribution of final products. The major products synthesized at temperatures between 60 °C and 0 °C were AgNPrs and D-AgNPs, respectively. The D-AgNPs synthesized at such low temperatures are unstable and become blunt when light irradiation is removed after the photochemical synthesis. These blunt nanoparticles with pentagonal multiple-twinned structures can be further used as the seeds to reconstruct complete D-AgNPs after irradiating blue LEDs at various bath temperatures. Our results showed that these rebuilt D-AgNPs are much more stable when at higher bath temperatures. Furthermore, the rebuilt D-AgNPs (edge lengths ~41 nm) can grow into larger D-AgNPs (edge lengths ~53 nm) after the irradiation of green LEDs. Surface-enhanced Raman spectra of CV in AgNP colloids showed that D-AgNP colloids have better SERS enhancements factors than AgNPrs.

A Nonflammable High-Voltage 4.7 V Anode-Free Lithium Battery.

Anode-free lithium-metal batteries employ in situ lithium-plated current collectors as negative electrodes to afford optimal mass and volumetric energy densities. The main challenges to such batteries include their poor cycling stability and the safety issues of the flammable organic electrolytes. Here, a high-voltage 4.7 V anode-free lithium-metal battery is reported, which uses a Cu foil coated with a layer (≈950 nm) of silicon-polyacrylonitrile (Si-PAN, 25.5 µg cm-2 ) as the negative electrode, a high-voltage cobalt-free LiNi0.5 Mn1.5 O4 (LNMO) as the positive electrode and a safe, nonflammable ionic liquid electrolyte composed of 4.5 m lithium bis(fluorosulfonyl)imide (LiFSI) salt in N-methyl-N-propyl pyrrolidiniumbis(fluorosulfonyl)imide (Py13 FSI) with 1 wt% lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as additive. The Si-PAN coating is found to seed the growth of lithium during charging, and reversibly expand/shrink during lithium plating/stripping over battery cycling. The wide-voltage-window electrolyte containing a high concentration of FSI- and TFSI- facilitates the formation of stable solid-electrolyte interphase, affording a 4.7 V anode-free Cu@Si-PAN/LiNi0.5 Mn1.5 O4 battery with a reversible specific capacity of ≈120 mAh g-1 and high cycling stability (80% capacity retention after 120 cycles). These results represent the first anode-free Li battery with a high 4.7 V discharge voltage and high safety.

Silver Nanoparticle-Mediated Synthesis of Fluorescent Thiolated Gold Nanoclusters.

A new strategy using silver nanoparticles (Ag NPs) to synthesize thiolated Au NCs is demonstrated. The quasi-spherical Ag NPs serve as a platform, functioning as a reducing agent for Au (III) and attracting capping ligands to the surface of the Ag NPs. Glutathione disulfide (GSSG) and dithiothreitol (DTT) were used as capping ligands to synthesize thiolated Au NCs (glutathione-Au NCs and DTT-Au NCs). The glutathione-Au NCs and DTT-Au NCs showed red color luminance with similar emission wavelengths (630 nm) at an excitation wavelength of 354 nm. The quantum yields of the glutathione-Au NCs and DTT-Au NCs were measured to be 7.3% and 7.0%, respectively. An electrophoretic mobility assay showed that the glutathione-Au NCs moved toward the anode, while the DTT-Au NCs were not mobile under the electric field, suggesting that the total net charge of the thiolated Au NCs is determined by the charges on the capping ligands. The detection of the KSV values, 26 M-1 and 0 M-1, respectively, revealed that glutathione-Au NCs are much more accessible to an aqueous environment than DTT-Au NCs.