Aligned Conjugated Polymer Nanofiber Networks in an Elastomer Matrix for High-Performance Printed Stretchable Electronics.

Conjugated polymer films are promising in wearable X-ray detection. However, achieving optimal film microstructure possessing good electrical and detection performance under large deformation via scalable printing remains challenging. Herein, we report bar-coated high-performance stretchable films based on a conjugated polymer P(TDPP-Se) and elastomer SEBS blend by optimizing the solution-processing conditions. The moderate preaggregation in solution and prolonged growth dynamics from a solvent mixture with limited dissolving capacity is critical to forming aligned P(TDPP-Se) chains/crystalline nanofibers in the SEBS phase with enhanced π-π stacking for charge transport and stress dissipation. The film shows a large elongation at break of >400% and high mobilities of 5.29 cm2 V-1 s-1 at 0% strain and 1.66 cm2 V-1 s-1 over 500 stretch-release cycles at 50% strain, enabling good X-ray imaging with a high sensitivity of 1501.52 µC Gyair-1 cm-2. Our work provides a morphology control strategy toward high-performance conjugated polymer film-based stretchable electronics.

Reduction of Thorium Tris(amido)arene Complexes: Reversible Double and Single C-C Couplings.

The reduction chemistry of thorium complexes is less explored compared to that of their uranium counterparts. Here, we report the synthesis, characterization, and reduction chemistry of two thorium(IV) complexes, (AdTPBN3)ThCl (1) and (DtbpTPBN3)ThCl(THF) (4) [RTPBN3 = 1,3,5-[2-(RN)C6H4]3C6H3; R = 1-adamantyl (Ad) or 3,5-di-tert-butylphenyl (Dtbp); THF = tetrahydrofuran], supported by tripodal tris(amido)arene ligands with different N-substituents. Reduction of 1 with excessive potassium in n-pentane yielded a double C-C coupling product, [(AdTPBN3)ThK(Et2O)2]2 (3), featuring a unique tetraanionic tricyclic core. On the other hand, reduction of 4 with 1 equiv of KC8 in hexanes/1,2-dimethoxyethane (DME) afforded a single C-C coupling product, [(DtbpTPBN3)Th(DME)]2 (5), with a dianionic bis(cyclohexadienyl) core. The solid- and solution-state structures of dinuclear thorium(IV) complexes 3 and 5 were established by X-ray crystallography and NMR spectroscopy. In addition, reactivity studies show that 3 and 5 can behave as thorium(II) and thorium(III) synthons to reduce organic halides. For instance, 3 and 5 are able to reduce 4 and 2 equiv of benzyl chloride, respectively, to regenerate 1 and 4 with concomitant formation of dibenzyl. Reversible C-C couplings under redox conditions provide an alternative approach to exploiting the potential of thorium arene complexes in redox chemistry.

Highly Stretchable Conjugated Polymer/Elastomer Blend Films with Sandwich Structure.

The physical blending of high-mobility conjugated polymers with ductile elastomers provides a simple way to realize high-performance stretchable films. However, how to control the morphology of the conjugated polymer and elastomer blend film and its response to mechanical fracture processes during stretching are not well understood. Herein, a sandwich structure is constructed in the blend film based on a conjugated polymer poly[(5-fluoro-2,1,3-benzothiadiazole-4,7-diyl)(4,4-dihexadecyl-4H-cyclopenta[2,1-b:3,4-b″]dithiophene-2,6-diyl)(6-fluoro-2,1,3-benzothiadiazole-4,7-diyl)(4,4-dihexadecyl-4H-cyclopenta[2,1-b:3,4-b″]dithiophene-2,6-diyl)] (PCDTFBT) and an elastomer polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS). The sandwich structure is composed of a PCDTFBT:SEBS mixed layer laminated with a PCDTFBT-rich layer at both the top and bottom surfaces. During stretching, the external strain energy can be effectively dissipated by the deformation of the crystalline PCDTFBT domains and amorphous SEBS phases and the recrystallization of the PCDTFBT chains. This endows the blend film with excellent ductility, with a large crack onset strain exceeding 1100%, and minimized the electrical degradation of the blend film at a large strain. This study indicates that the electrical and mechanical performance of conjugated polymer/elastomer blend films can be improved by manipulating their microstructure.

Two-Electron Oxidations at a Single Cerium Center.

Two-electron oxidations are ubiquitous and play a key role in the synthesis and catalysis. For transition metals and actinides, two-electron oxidation often takes place at a single-metal site. However, redox reactions at rare-earth metals have been limited to one-electron processes due to the lack of accessible oxidation states. Despite recent advancements in nontraditional oxidation state chemistry, the low stability of low-valent compounds and large disparity among different oxidation states prevented the implementation of two-electron processes at a single rare-earth metal center. Here we report two-electron oxidations at a cerium(II) center to yield cerium(IV) terminal oxo and imido complexes. A series of cerium(II-IV) complexes supported by a tripodal tris(amido)arene ligand were synthesized and characterized. Experimental and theoretical studies revealed that the cerium(II) complex is best described as a 4f2 ion stabilized by δ-backdonation to the anchoring arene, while the cerium(IV) oxo and imido complexes exhibit multiple bonding characters. The accomplishment of two-electron oxidations at a single cerium center brings a new facet to molecular rare-earth metal chemistry.

A Combined Synthetic, Magnetic, and Theoretical Study on Enhancing Ligand-Field Axiality for Dy(III) Single-Molecule Magnets Supported by Ferrocene Diamide Ligands.

Molecular design is crucial for improving the performance of single-molecule magnets (SMMs). For dysprosium(III) SMMs, enhancing ligand-field axiality is a well-suited strategy to achieve high-performance SMMs. We synthesized a series of dysprosium(III) complexes, (NNTIPS)DyBr(THF)2 (1, NNTIPS = fc(NSiiPr3)2; fc = 1,1'-ferrocenediyl, THF = tetrahydrofuran), [(NNTIPS)Dy(THF)3][BPh4] (2), (NNTIPS)DyI(THF)2 (3), and [(NNTBS)Dy(THF)3][BPh4] (4, NNTBS = fc(NSitBuMe2)2), supported by ferrocene diamide ligands. X-ray crystallography shows that the rigid ferrocene backbone enforces a nearly axial ligand field with weakly coordinating equatorial ligands. Dysprosium(III) complexes 1-4 all exhibit slow magnetic relaxation under zero fields and possess high effective barriers (Ueff) around 1000 K, comparable to previously reported (NNTBS)DyI(THF)2 (5). We probed the influences of structural variations on SMM behaviors by theoretical calculations and found that the distribution of negative charges defined by rq, i.e., the ratio of the charges on the axial ligands to the charges on the equatorial ligands, plays a decisive role. Moreover, theoretical calculations on a series of model complexes 1'-5' without equatorial ligands unveil that the axial crystal-field parameters B20 are directly proportional to the N-Dy-N angles and support the hypothesis that enhancing the ligand-field axiality could improve SMM performance.

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells.

Photovoltaic technology with low weight, high specific power in cold environments, and compatibility with flexible fabrication is highly desired for near-space vehicles and polar region applications. Herein, we demonstrate efficient low-temperature flexible perovskite solar cells by improving the interfacial contact between electron-transport layer (ETL) and perovskite layer. We find that the adsorbed oxygen active sites and oxygen vacancies of flexible tin oxide (SnO2 ) ETL layer can be effectively decreased by incorporating a trace amount of titanium tetrachloride (TiCl4 ). The effective defects elimination at the interfacial increases the electron mobility of flexible SnO2 layer, regulates band alignment at the perovskite/SnO2 interface, induces larger perovskite crystal growth, and improves charge collection efficiency in a complete solar cell. Correspondingly, the improved interfacial contact transforms into high-performance solar cells under one-sun illumination (AM 1.5G) with efficiencies up to 23.7 % at 218 K, which might open up a new era of application of this emerging flexible photovoltaic technology to low-temperature environments such as near-space and polar regions.

Rare Earth Metal Complexes Supported by a Tripodal Tris(amido) Ligand System Featuring an Arene Anchor.

A new tripodal tris(amido) ligand system featuring an arene anchor was developed and applied to the coordination chemistry of rare earth metals. Two tris(amido) ligands with a 1,3,5-triphenylbenzene backbone were prepared in two steps from commercially available reagents on a gram scale. Salt metathesis and alkane elimination reactions were exploited to prepare mononuclear rare earth metal complexes in moderate to good yields. For salt metathesis reactions, while metal tribromides yielded neutral metal tris(amido) complexes, metal trichlorides led to the formation of ate complexes with an additional chloride bound to the metal center. The new compounds were characterized by X-ray crystallography, elemental analysis, and 1H and 13C nuclear magnetic resonance spectroscopy. The rare earth metal complexes exhibit a trigonal planar coordination geometry for the [MN3] fragment in the solid state rather than a trigonal pyramidal geometry, commonly observed for rare earth metal tris(amido) complexes such as M[N(SiMe3)2]3. Moreover, the arene anchor of the tripodal ligands is engaged in a nonnegligible interaction with the rare earth metal ions. Density functional theory calculations were performed to gain insight into the bonding interactions between the tripodal ligands and the rare earth metal ions. While LUMOs of these rare earth metal complexes are mainly π* orbitals of the arene with a minor component of metal-based orbitals, HOMO-15 and HOMO-16 of a lanthanum complex show that the arene anchor serves as a π donor to the trivalent lanthanum ion.

Arene-Bridged Dithorium Complexes: Inverse Sandwiches Supported by a δ Bonding Interaction.

A series of arene-bridged dithorium complexes was synthesized via the reduction by potassium graphite of a Th(IV) precursor in the presence of arenes. All these compounds adopt an inverse-sandwich structure, with the arene bridging two thorium centers in a µ-η6,η6-mode. Structural and spectroscopic data support the assignment of two Th(IV) ions and an arene tetraanion, which is an aromatic structure according to Hückel's rule. Arene exchange reactions revealed that the stability of the corresponding compounds follows the series naphthalene ≪ toluene < benzene ≈ biphenyl. Reactivity studies showed that they function as four-electron reductants capable to reduce anthracene, cyclooctatetraene, alkynes, and azobenzene, while a mononuclear thorium anthracene complex could reduce benzene. Density functional theory calculations unveiled that the bonding interactions consist of δ bonds between thorium 6d and 5f orbitals and arene π* orbitals, showing a significant covalent character, able to stabilize highly reduced arene ligands.

Design of efficient molecular organic light-emitting diodes by a high-throughput virtual screening and experimental approach.

Virtual screening is becoming a ground-breaking tool for molecular discovery due to the exponential growth of available computer time and constant improvement of simulation and machine learning techniques. We report an integrated organic functional material design process that incorporates theoretical insight, quantum chemistry, cheminformatics, machine learning, industrial expertise, organic synthesis, molecular characterization, device fabrication and optoelectronic testing. After exploring a search space of 1.6 million molecules and screening over 400,000 of them using time-dependent density functional theory, we identified thousands of promising novel organic light-emitting diode molecules across the visible spectrum. Our team collaboratively selected the best candidates from this set. The experimentally determined external quantum efficiencies for these synthesized candidates were as large as 22%.

Preparation of a biphase composite scaffold and its application in tissue engineering for femoral osteochondral defects in rabbits.

PURPOSE: Three-dimensional bioactive scaffolds are useful tools for stem cell implant in tissue-engineering. For chondral and subchondral repair, the chondroinductive and osteoinductive property of a scaffold is a major challenge. The scaffolds that aim to osteogenic differentiation have been well studied. However, cartilage cells can hardly be induced for osteogenesis, and monophase scaffolds cannot ideally repair both cartilage and subchondral defects at the same time. METHODS: We developed a novel biphase composite scaffold and observe its application osteochondral defects. We combined the advantages of silk-fibroin/chitosan (SF/CS) scaffold in chondrogenic differentiation and the silk-fibroin/chitosan/nano-hydroxyapatite (SF/CS/nHA) scaffold in osteogenic differentiation and bone regeneration, and synthesized a SF/CS-SF/CS/nHA scaffold, which contained both the chondrocytic phase (SF/CS) and the osteoblastic phase (SF/CS/nHA). RESULTS: The biphase scaffold exhibited a porosity ratio around 90% and a water absorption ratio about 822%. A similar degradation property to traditional monophase scaffolds was observed. Bone mesenchymal stem cells (BMSCs) showed a good proliferation on this scaffold. Expression of two types of collagen was inducable for BMSCs on the scaffold. Neoformative extracellular matrix integrated with the scaffold was observed by the scanning electron microscope. When implanted in the lesion site in the rabbit femur with cartilage injury, mixing and filling function were exerted by the cell-scaffold constructs (CSCs). Micro-CT scanning revealed both chondral and subchondral layers were repaired. Moreover, type I and II collagens were both expressed in the implanted CSCs. CONCLUSIONS: Chondral and subchondral repair can be achieved using the biphase scaffold implant that permits both chondrogenesis and osteogenesis from BMSCs. This approach has the potential to be clinically used for tissue engineering implantation.

Palladium-Catalyzed N-Arylation of Iminodibenzyls and Iminostilbenes with Aryl- and Heteroaryl Halides.

Compounds containing the iminodibenzyl and iminostilbene ring systems are prevalent in medicinal targets and functional materials. Herein, we report palladium-catalyzed conditions for the N-arylation of these ring systems. This protocol could be applied to a variety of (hetero)aryl chloride and bromide substrates, including ones, which are sterically hindered or those containing a variety of functional groups. Use of the fourth-generation palladacycle precatalyst gave good to excellent yields by using low palladium-catalyst loadings (0.1 to 1 mol %).

Reactivity and Properties of Metal Complexes Enabled by Flexible and Redox-Active Ligands with a Ferrocene Backbone.

Our group has focused on the organometallic chemistry of rare-earth metals and actinides for a decade. By installing ferrocenediamide ligands at electropositive metal centers, we have been able to disclose unprecedented reactivity toward aromatic N-heterocycles, arenes, and other small molecules such as P4. Systematic studies employing X-ray crystallography, spectroscopy, cyclic voltammetry, and density functional theory calculations revealed that the ferrocene backbone could stabilize the electron-deficient metal through a donor-acceptor-type interaction. Most noteworthy is that this interaction can be readily turned on or off by the addition or removal of a Lewis base. In addition to its flexible coordination, the redox-active nature of the ferrocene backbone enabled us to explore redox-switchable transformations. The introduction of ferrocene-based ligands into organolanthanide chemistry not only helped us to study intriguing fundamental problems but also led to fruitful chemistry including small-molecule activation and controlled copolymerization reactions.

Tetraanionic biphenyl lanthanide complexes as single-molecule magnets.

Inverse sandwich biphenyl complexes [(NN(TBS))Ln]2(µ-biphenyl)[K(solvent)]2 [NN(TBS) = 1,1'-fc(NSi(t)BuMe2)2; Ln = Gd, Dy, Er; solvent = Et2O, toluene; 18-crown-6], containing a quadruply reduced biphenyl ligand, were synthesized and their magnetic properties measured. One of the dysprosium biphenyl complexes was found to exhibit antiferromagnetic coupling and single-molecule-magnet behavior with Ueff of 34 K under zero applied field. The solvent coordinated to potassium affected drastically the nature of the magnetic interaction, with the other dysprosium complex showing ferromagnetic coupling. Ab initio calculations were performed to understand the nature of magnetic coupling between the two lanthanide ions bridged by the anionic arene ligand and the origin of single-molecule-magnet behavior.

Bimetallic cleavage of aromatic C-H bonds by rare-earth-metal complexes.

A new type of C-H bond activation mediated by rare-earth metals under reducing conditions is reported. The synergy between reductants and rare-earth-metal complexes allows the cleavage of unactivated aromatic C-H bonds. The reaction between rare-earth-metal iodides supported by a 1,1'-ferrocenediamide ligand and potassium graphite in benzene leads to the formation of a 1:1 metal molar ratio of the corresponding metal hydride and metal phenyl complex. A proposed mechanism involving an inverse sandwich arene bimetallic intermediate is supported by experimental and computational studies.

Neutral inverse-sandwich rare-earth metal complexes of the benzene tetraanion.

Rare-earth metal complexes of the parent benzene tetraanion and neutral inverse-sandwich rare-earth metal arene complexes have remained elusive. Here, we report the first neutral inverse-sandwich rare-earth metal complexes of the parent benzene tetraanion supported by a monoanionic ß-diketiminate (BDI) ligand. Reduction of the trivalent rare-earth metal diiodide precursors (BDI)MI2(THF) (BDI = HC(C(Me)N[C6H3-(3-pentyl)2-2,6])2; M = Y, 1-Y; M = Sm, 1-Sm) in benzene or para-xylene by potassium graphite yielded the neutral inverse-sandwich rare-earth metal arene complexes [(BDI)M(THF) n ]2(µ-η6,η6-arene) (M = Y, Sm; arene = benzene, 2-M; arene = para-xylene, 3-M). Single crystal X-ray diffraction, spectroscopic and magnetic characterization studies, together with density functional theory (DFT) calculations confirm that these neutral rare-earth metal arene complexes possess an [M3+-(arene)4--M3+] electronic structure with strong metal-arene δ interactions. The arene exchange reactivity shows that 2-Sm has higher stability than 3-Sm. Furthermore, 2-Sm can behave as a four-electron reductant to reduce unsaturated organic substrates. Particularly, while the reaction of 2-Sm with 1,3,5,7-cyclooctatetraene (COT) yielded (BDI)Sm(η8-COT) (4-Sm), 2-Sm reacted with 1,4-diphenylbutadiyne to afford (BDI)Sm(η4-C4Ph2) (5-Sm), the first rare-earth metallacyclopentatriene complex.

Synthesis of benzooxepane-fused cyclobutene derivatives via Pd-catalyzed cascade reactions of haloarenes and diynylic ethers.

A tandem palladium-catalyzed Sonogashira coupling, propargyl-allenyl isomerization, and [2+2] cycloaddition sequence between electron-deficient haloarenes and 1,8-diynylic ethers is developed. The reaction shows good functional tolerance and proceeds under mild conditions to provide a new profile of benzooxepane-fused cyclobutene derivatives in moderate to high yields with high selectivity. The reaction mechanism is validated both by experimental studies and DFT calculations.

Electrohydrodynamically Printed d-f Transition Cerium(III) Complex.

The d-f transition rare earth complexes have recently emerged as a promising candidate for display applications due to the parity-allowed transition, high photoluminescence quantum yield (PLQY), short excited lifetime, and tunable emissions. Besides, inkjet printing has been regarded as an important technique for realizing full-color display. However, inkjet-printed d-f transition rare earth complexes have not been investigated. Herein, for the first time, we explored d-f transition cerium(III) complex 2-Me as the luminescent material by inkjet printing. With 1,2-dichlorobenzene as solvent and polystyrene as an additive, 2-Me film exhibits a similar emission peak and excited-state lifetime with 2-Me powder and a high PLQY of 45%, demonstrating the excellent stability of 2-Me ink. Finally, we suppressed the coffee ring effect and prepared the first inkjet-printed pattern ''HUST'' composed of d-f transition rare earth complex ink with uniform blue fluorescence. Our pioneering work provides a promising alternative for inkjet printing inks.

Biocompatible Metal-Free Perovskite Membranes for Wearable X-ray Detectors.

Halide perovskites are emerging as promising materials for X-ray detection owing to their compatibility with flexible fabrication, cost-effective solution processing, and exceptional carrier transport behaviors. However, the challenge of removing lead from high-performing perovskites, crucial for wearable electronics, while retaining their superior performance, persists. Here, we present for the first time a highly sensitive and robust flexible X-ray detector utilizing a biocompatible, metal-free perovskite, MDABCO-NH4I3 (MDABCO = methyl-N'-diazabicyclo[2.2.2]octonium). This wearable X-ray detector, based on a MDABCO-NH4I3 thick membrane, exhibits remarkable properties including a large resistivity of 1.13 × 1011 Ω cm, a high mobility-lifetime product (µ-τ) of 1.64 × 10-4 cm2 V-1, and spin Seebeck effect coefficient of 1.9 nV K-1. We achieve a high sensitivity of 6521.6 ± 700 µC Gyair-1 cm-2 and a low detection limit of 77 nGyair s-1, ranking among the highest for biocompatible X-ray detectors. Additionally, the device exhibits effective X-ray imaging at a low dose rate of 1.87 µGyair s-1, which is approximately one-third of the dose rate used in regular medical diagnostics. Crucially, both the MDABCO-NH4I3 thick membrane and the device showcase excellent mechanical robustness. These attributes render the flexible MDABCO-NH4I3 thick membranes highly competitive for next-generation, high-performance, wearable X-ray detection applications.

Flexible Indoor Perovskite Solar Cells by In Situ Bottom-Up Crystallization Modulation and Interfacial Passivation.

A robust perovskite-buried interface is pivotal for achieving high-performance flexible indoor photovoltaics as it significantly influences charge transport and extraction efficiency. Herein, a molecular bridge strategy is introduced utilizing sodium 2-cyanoacetate (SZC) additive at the perovskite-buried interface to simultaneously achieve in situ passivation of interfacial defects and bottom-up crystallization modulation, resulting in high-performance flexible indoor photovoltaic applications. Supported by both theoretical calculations and experimental evidences, it illustrates how SZCs serve as molecular bridges, establishing robust bonds between SnO2 transport layer and perovskite, mitigating oxygen vacancy defects and under-coordinated Pb defects at interface during flexible fabrication. This, in turn, enhances interfacial energy level alignment and facilitates efficient carrier transport. Moreover, this in situ investigation of perovskite crystallization dynamics reveals bottom-up crystallization modulation, extending perovskite growth at the buried interface and influencing subsequent surface recrystallization. This results in larger crystalline grains and improved lattice strain of the perovskite during flexible fabrication. Finally, the optimized flexible solar cells achieve an impressive efficiency exceeding 41% at 1000 lux, with a fill factor as high as 84.32%. The concept of the molecular bridge represents a significant advancement in enhancing the performance of perovskite-based flexible indoor photovoltaics for the upcoming era of Internet of Things (IoT).

Defect Passivation Refinement in Perovskite Photovoltaics: Achieving Efficiency over 45% under Low-Light and Low-Temperature Dual Extreme Conditions.

Perovskite photovoltaics have emerged as the most promising candidates for next-generation light-to-electricity technology. However, their practical application still suffers from energy loss induced by intrinsic defects within the perovskite lattice. Here, a refined defect passivation in perovskite films is designed, which shows a multi-interaction mechanism between the perovskite and passivator. Interestingly, a shift of molecular bonding is observed upon cooling down the film, leading to a stronger passivation of iodine/formamidine vacancies. Such mechanism on device under low-light and low-temperature conditions is further leveraged and a record efficiency over 45% with durable ambient stability (T90 > 4000 h) is obtained. The pioneer application of perovskite solar cells in above dual extreme conditions in this work reveals the key principles of designing functional groups for the passivators, and also demonstrates the capability of perovskites for diverse terrestrial energy conversion applications in demanding environments such as polar regions and outer space.