Formaldehyde and acetaldehyde exposure mitigation in US residences: in-home measurements of ventilation control and source control.

Measurements were taken in new US residences to assess the extent to which ventilation and source control can mitigate formaldehyde exposure. Increasing ventilation consistently lowered indoor formaldehyde concentrations. However, at a reference air exchange rate of 0.35 h(-1), increasing ventilation was up to 60% less effective than would be predicted if the emission rate were constant. This is consistent with formaldehyde emission rates decreasing as air concentrations increase, as observed in chamber studies. In contrast, measurements suggest acetaldehyde emission was independent of ventilation rate. To evaluate the effectiveness of source control, formaldehyde concentrations were measured in Leadership in Energy and Environmental Design (LEED)-certified/Indoor airPLUS homes constructed with materials certified to have low emission rates of volatile organic compounds (VOC). At a reference air exchange rate of 0.35 h(-1), and adjusting for home age, temperature and relative humidity, formaldehyde concentrations in homes built with low-VOC materials were 42% lower on average than in reference new homes with conventional building materials. Without adjustment, concentrations were 27% lower in the low-VOC homes. The mean and standard deviation of formaldehyde concentration was 33 µg/m(3) and 22 µg/m(3) for low-VOC homes and 45 µg/m(3) and 30 µg/m(3) for conventional.

Computer-assisted scanning electron microscopy of wood pulp fibres: dimensions and spatial distributions in a polypropylene composite.

A shape description approach is introduced as a step for performing an automatic processing of fibre cross-sectional images. The approach, in combination with appropriate mathematical morphology, yields edited images, which are suitable for further computerized image analysis. Important parameters such as fibre wall thickness, fibre perimeter, form factor and collapse index are quantified effectively and objectively. Although some differences are encountered within groups of split fibres, manual and automatic quantification of intact fibres yields similar results. In addition, the suitability of a distance transform approach for quantifying the fibre inter-distances in composites is demonstrated. Such tools will be valuable for understanding the mechanical properties of engineered fibre-reinforced composite materials.

CP/MAS 13C-NMR spectroscopy applied to structure and interaction studies on cellulose I.

Solid-state Cross-Polarization Magic Angle Spinning Carbon-13 Nuclear Magnetic Resonance (CP/MAS 13C-NMR) has been used to investigate the structure and interactions of cellulose I. The use of spectral fitting for the extraction of information from CP/MAS 13C-NMR spectra is reviewed and results obtained are discussed. Examples are shown where the method has been used to monitor the structural changes occurring in wood cellulose during kraft pulping. The effects observed on the cellulose and hemicelluloses are further investigated using a model system. Assignments of signal intensities originating from xylan-cellulose interactions are made.