RESUMO
The electrooxidation of propylene presents a promising route for the production of 1,2-propylene glycol (PG) under ambient conditions. However, the C-O coupling process remains a challenge owing to the high energy barrier. In this work, we developed a highly efficient electrocatalyst of bipyridine-confined Ag single atoms on UiO-bpy substrates (Ag SAs/UiO-bpy), which exposed two in-plane coordination vacancies during reaction for the co-adsorption of key intermediates. Detailed structure and electronic property analyses demonstrate that CH3CHCH2OH* and *OH could stably co-adsorb in a square planar configuration, which then accelerates the charge transfer between them. The combination of stable co-adsorption and efficient charge transfer facilitates the C-O coupling process, thus significantly lowering its energy barrier. At 2.4 V versus a reversible hydrogen electrode, Ag SAs/UiO-bpy achieved a record-high activity of 61.9 gPG m-2 h-1. Our work not only presents a robust electrocatalyst but also advances a new perspective on catalyst design for propylene electrooxidation.
RESUMO
The poor durability of Ru-based catalysts limits the practical application in proton exchange membrane water electrolysis (PEMWE). Here, we report that the asymmetric active units in Ru1-xMxO2 (M = Sb, In, and Sn) binary solid solution oxides are constructed by introducing acid-resistant p-block metal sites, breaking the activity and stability limitations of RuO2 in acidic oxygen evolution reaction (OER). Constructing highly asymmetric Ru-O-Sb units with a strong electron delocalization effect significantly shortens the spatial distance between Ru and Sb sites, improving the bonding strength of the overall structure. The unique two-electron redox couples at Sb sites in asymmetric active units trigger additional chemical steps at different OER stages, facilitating continuous proton transfer. The optimized Ru0.8Sb0.2O2 solid solution requires a superlow overpotential of 160 mV at 10 mA cm-2 and a record-breaking stability of 1100 h in an acidic electrolyte. Notably, the scale-prepared Ru0.8Sb0.2O2 achieves efficient PEMWE performance under industrial conditions. General mechanism analysis shows that the enhanced proton transport in the asymmetric Ru-O-M unit provides a new working pathway for acidic OER, breaking the scaling relationship without sacrificing stability.
RESUMO
Developing ruthenium-based heterogeneous catalysts with an efficient and stable interface is essential for enhanced acidic oxygen evolution reaction (OER). Herein, we report a defect-rich ultrathin boron nitride nanosheet support with relatively independent electron donor and acceptor sites, which serves as an electron reservoir and receiving station for RuO2, realizing the rapid supply and reception of electrons. Through precisely controlling the reaction interface, a low OER overpotential of only 180â mV (at 10â mA cm-2) and long-term operational stability (350â h) are achieved, suggesting potential practical applications. Inâ situ characterization and theoretical calculations have validated the existence of a localized electronic recycling between RuO2 and ultrathin BN nanosheets (BNNS). The electron-rich Ru sites accelerate the adsorption of water molecules and the dissociation of intermediates, while the interconnection between the O-terminal and B-terminal edge establishes electronic back-donation, effectively suppressing the over-oxidation of lattice oxygen. This study provides a new perspective for constructing a stable and highly active catalytic interface.
RESUMO
Semihydrogenation is a crucial industrial process. Noble metals such as Pd have been extensively studied in semihydrogenation reactions, owing to their unique catalytic activity toward hydrogen activation. However, the overhydrogenation of alkenes to alkanes often happens due to the rather strong adsorption of alkenes on Pd active phases. Herein, we demonstrate that the incorporation of Pd active phases as single-atom sites in perovskite lattices such as SrTiO3 can greatly alternate the electronic structure and coordination environment of Pd active phases to facilitate the desorption of alkenes rather than further hydrogenation. Furthermore, the incorporated Pd sites can be well stabilized without sintering by a strong host-guest interaction with SrTiO3 during the activation of H species in hydrogenation reactions. As a result, the Pd incorporated SrTiO3 (Pd-SrTiO3) exhibits an excellent time-independent selectivity (> 99.9 %) and robust durability for the photocatalytic semihydrogenation of phenylacetylene to styrene. This strategy based on incorporation of active phases in perovskite lattices will have broad implications in the development of high-performance photocatalysts for selective hydrogenation reactions.
RESUMO
Exploring an efficient and robust electrocatalyst for hydrogen evolution reaction (HER) at high pH and temperature holds the key to the industrial application of alkaline water electrolysis (AWE). Herein, we design an open tunnel structure by dealloying a series of Laves phase intermetallics, i.e., MCo2 and MRu0.25Co1.75 (M = Sc and Zr). The dealloying process can induce a zeolite-like metal framework for ScCo2 and ScRu0.25Co1.75 by stripping Sc metal from the center of a tunnel structure. This structural engineering significantly lowers their overpotentials at a current density of 500 mA/cm2 (η500) ca. 80 mV in 1.0 M KOH. Through a simple process, ScRu0.25Co1.75 can be easily decorated on a carbon cloth substrate and only requires 132 mV to reach 500 mA/cm2. More importantly it can maintain activity over 1000 h in industrial conditions (6.0 M KOH at 333 K), showing its potential for practical industrial applications.
RESUMO
Copper-oxide electrocatalysts have been demonstrated to effectively perform the electrochemical CO2 reduction reaction (CO2RR) toward C2+ products, yet preserving the reactive high-valent CuOx has remained elusive. Herein, we demonstrate a model system of Lewis acidic supported Cu electrocatalyst with a pulsed electroreduction method to achieve enhanced performance for C2+ products, in which an optimized electrocatalyst could reach â¼76% Faradaic efficiency for C2+ products (FEC2+) at â¼-0.99 V versus reversible hydrogen electrode, and the corresponding mass activity can be enhanced by â¼2 times as compared to that of conventional CuOx. In situ time-resolved X-ray absorption spectroscopy investigating the dynamic chemical/physical nature of Cu during CO2RR discloses that an activation process induced by the KOH electrolyte during pulsed electroreduction greatly enriched the Cuδ+O/Znδ+O interfaces, which further reveals that the presence of Znδ+O species under the cathodic potential could effectively serve as a Lewis acidic support for preserving the Cuδ+O species to facilitate the formation of C2+ products, and the catalyst structure-property relationship of Cuδ+O/Znδ+O interfaces can be evidently realized. More importantly, we find a universality of stabilizing Cuδ+O species for various metal oxide supports and to provide a general concept of appropriate electrocatalyst-Lewis acidic support interaction for promoting C2+ products.
RESUMO
Sn-based materials have been demonstrated as promising catalysts for the selective electrochemical CO2 reduction reaction (CO2RR). However, the detailed structures of catalytic intermediates and the key surface species remain to be identified. In this work, a series of single-Sn-atom catalysts with well-defined structures is developed as model systems to explore their electrochemical reactivity toward CO2RR. The selectivity and activity of CO2 reduction to formic acid on Sn-single-atom sites are shown to be correlated with Sn(IV)-N4 moieties axially coordinated with oxygen (O-Sn-N4), reaching an optimal HCOOH Faradaic efficiency of 89.4% with a partial current density (jHCOOH) of 74.8 mA·cm-2 at -1.0 V vs reversible hydrogen electrode (RHE). Employing a combination of operando X-ray absorption spectroscopy, attenuated total reflectance surface-enhanced infrared absorption spectroscopy, Raman spectroscopy, and 119Sn Mössbauer spectroscopy, surface-bound bidentate tin carbonate species are captured during CO2RR. Moreover, the electronic and coordination structures of the single-Sn-atom species under reaction conditions are determined. Density functional theory (DFT) calculations further support the preferred formation of Sn-O-CO2 species over the O-Sn-N4 sites, which effectively modulates the adsorption configuration of the reactive intermediates and lowers the energy barrier for the hydrogenation of *OCHO species, as compared to the preferred formation of *COOH species over the Sn-N4 sites, thereby greatly facilitating CO2-to-HCOOH conversion.
RESUMO
Metastable state is the most active catalyst state that dictates the overall catalytic performance and rules of catalytic behaviors; however, identification and stabilization of the metastable state of catalyst are still highly challenging due to the continuous evolution of catalytic sites during the reaction process. In this work, operando 119Sn Mössbauer measurements and theoretical simulations were performed to track and identify the metastable state of single-atom Sn in copper oxide (Sn1-CuO) for highly selective CO2 electroreduction to CO. A maximum CO Faradaic efficiency of around 98% at -0.8 V (vs. RHE) over Sn1-CuO was achieved at an optimized Sn loading of 5.25 wt. %. Operando Mössbauer spectroscopy clearly identified the dynamic evolution of atomically dispersed Sn4+ sites in the CuO matrix that enabled the in situ transformation of Sn4+-O4-Cu2+ to a metastable state Sn4+-O3-Cu+ under CO2RR conditions. In combination with quasi in situ X-ray photoelectron spectroscopy, operando Raman and attenuated total reflectance surface enhanced infrared absorption spectroscopies, the promoted desorption of *CO over the Sn4+-O3 stabilized adjacent Cu+ site was evidenced. In addition, density functional theory calculations further verified that the in situ construction of Sn4+-O3-Cu+ as the true catalytic site altered the reaction path via modifying the adsorption configuration of the *COOH intermediate, which effectively reduced the reaction free energy required for the hydrogenation of CO2 and the desorption of the *CO, thereby greatly facilitating the CO2-to-CO conversion. This work provides a fundamental insight into the role of single Sn atoms on in situ tuning the electronic structure of Cu-based catalysts, which may pave the way for the development of efficient catalysts for high-selectivity CO2 electroreduction.
RESUMO
Designing stable single-atom electrocatalysts with lower energy barriers is urgent for the acidic oxygen evolution reaction. In particular, the atomic catalysts are highly dependent on the kinetically sluggish acid-base mechanism, limiting the reaction paths of intermediates. Herein, we successfully manipulate the steric localization of Ru single atoms at the Co3O4 surface to improve acidic oxygen evolution by precise control of the anchor sites. The delicate structure design can switch the reaction mechanism from the lattice oxygen mechanism (LOM) to the optimized adsorbate evolution mechanism (AEM). In particular, Ru atoms embedded into cation vacancies reveal an optimized mechanism that activates the proton donor-acceptor function (PDAM), demonstrating a new single-atom catalytic pathway to circumvent the classic scaling relationship. Steric interactions with intermediates at the anchored Ru-O-Co interface played a primary role in optimizing the intermediates' conformation and reducing the energy barrier. As a comparison, Ru atoms confined to the surface sites exhibit a lattice oxygen mechanism for the oxygen evolution process. As a result, the delicate atom control of the spatial position presents a 100-fold increase in mass activity from 36.96 A gRu(ads)-1 to 4012.11 A gRu(anc)-1 at 1.50 V. These findings offer new insights into the precise control of single-atom catalytic behavior.
RESUMO
Acidic water electrolysis enables the production of hydrogen for use as a chemical and as a fuel. The acidic environment hinders water electrolysis on non-noble catalysts, a result of the sluggish kinetics associated with the adsorbate evolution mechanism, reliant as it is on four concerted proton-electron transfer steps. Enabling a faster mechanism with non-noble catalysts will help to further advance acidic water electrolysis. Here, we report evidence that doping Ba cations into a Co3O4 framework to form Co3-xBaxO4 promotes the oxide path mechanism and simultaneously improves activity in acidic electrolytes. Co3-xBaxO4 catalysts reported herein exhibit an overpotential of 278 mV at 10 mA/cm2 in 0.5 M H2SO4 electrolyte and are stable over 110 h of continuous water oxidation operation. We find that the incorporation of Ba cations shortens the Co-Co distance and promotes OH adsorption, findings we link to improved water oxidation in acidic electrolyte.
RESUMO
Herein, we propose a simple yet effective method to deposit metal nanoparticles on Ti3C2Tx-MXene via direct electrosynthesis. Without using any reducing reagent or annealing under reducing atmosphere, it allows the conversion of metal salts (e.g., PtCl4, RuCl3·yH2O, IrCl3·zH2O, AgNO3, and CuCl2·2H2O) to metal nanoparticles with a small particle size (ca. 2 nm). Under these circumstances, it was realized that the support effect from Ti3C2Tx-MXene (electron pushing) is quite profound, in which the Ti3C2Tx-MXene support will act as an electron donor to push the electron to Pt nanoparticles and increase the electron density of Pt nanoparticles. It populates the antibonding state of Pt-Pt bonds as well as the adsorbate level that leads to a "weakening" of the ΔGH* in the optimal position. This rationalizes the outstanding activity of Pt/Ti3C2Tx-MXene (5 wt %, η10 = 16 mV) for the hydrogen evolution reaction (HER). In addition, this direct electrosynthesis method grants the growth of two or multiple types of metal nanoparticles on the Ti3C2Tx-MXene substrate that can perform dual or multiple functions as desired. For instance, one can prepare an electrocatalyst with Pt (2.5 wt %) and Ru nanoparticles (2.5 wt %) on the Ti3C2Tx-MXene support from the same synthetic method. This electrocatalyst (Pt_Ru/Ti3C2Tx-MXene) can display good electrocatalytic HER performance in both acid (0.5 M H2SO4) and alkaline electrolytes (1.0 M KOH).
RESUMO
Ni-rich layered oxides are one of the most attractive cathode materials in high-energy-density lithium-ion batteries, their degradation mechanisms are still not completely elucidated. Herein, we report a strong dependence of degradation pathways on the long-range cationic disordering of Co-free Ni-rich Li1-m (Ni0.94 Al0.06 )1+m O2 (NA). Interestingly, a disordered layered phase with lattice mismatch can be easily formed in the near-surface region of NA particles with very low cation disorder (NA-LCD, m≤0.06) over electrochemical cycling, while the layered structure is basically maintained in the core of particles forming a "core-shell" structure. Such surface reconstruction triggers a rapid capacity decay during the first 100â cycles between 2.7 and 4.3â V at 1â C or 3â C. On the contrary, the local lattice distortions are gradually accumulated throughout the whole NA particles with higher degrees of cation disorder (NA-HCD, 0.06≤m≤0.15) that lead to a slow capacity decay upon cycling.
RESUMO
Single-atom catalysts exhibit superior CO2 -to-CO catalytic activity, but poor kinetics of proton-coupled electron transfer (PCET) steps still limit the overall performance toward the industrial scale. Here, we constructed a Fe-P atom paired catalyst onto nitrogen doped graphitic layer (Fe1 /PNG) to accelerate PCET step. Fe1 /PNG delivers an industrial CO current of 1â A with FECO over 90 % at 2.5â V in a membrane-electrode assembly, overperforming the CO current of Fe1 /NG by more than 300 %. We also decrypted the synergistic effects of the P atom in the Fe-P atom pair using operando techniques and density functional theory, revealing that the P atom provides additional adsorption sites for accelerating water dissociation, boosting the hydrogenation of CO2 , and enhancing the activity of CO2 reduction. This atom-pair catalytic strategy can modulate multiple reactants and intermediates to break through the inherent limitations of single-atom catalysts.
RESUMO
InP-based quantum dot (QD) light-emitting diodes (QLEDs) provide a heavy-metal-free route to size-tuned LEDs having high efficiency. The stability of QLEDs may be enhanced by replacing organic hole-injection layers (HILs) with inorganic layers. However, inorganic HILs reported to date suffer from inefficient hole injection, the result of their shallow work functions. Here, we investigate the tuning of the work function of nickel oxide (NiOx) HILs using self-assembled molecules (SAMs). Density functional theory simulations and near-edge X-ray absorption fine structure put a particular focus onto the molecular orientation of the SAMs in tuning the work function of the NiOx HIL. We find that orientation plays an even stronger role than does the underlying molecular dipole itself: SAMs having the strongest electron-withdrawing nitro group (NO2), despite having a high intrinsic dipole, show limited work function tuning, something we assign to their orientation parallel to the NiOx surface. We further find that the NO2 groupâwhich delocalizes electrons over the molecule by resonanceâinduces a deep lowest unoccupied molecular orbital level that accepts electrons from QDs, producing luminescence quenching. In contrast, SAMs containing a trifluoromethyl group exhibit an angled orientation relative to the NiOx surface, better activating hole injection into the active layer without inducing luminescence quenching. We report an external quantum efficiency (EQE) of 18.8%âthe highest EQE among inorganic HIL-based QLEDs (including Cd-based QDs)âin InP QLEDs employing inorganic HILs.
RESUMO
Tuning intermediate adsorption energy by shifting the d-band center offers a powerful strategy to tailor the reactivity of metal catalysts. Here we report a potential sweep method to grow Pd layer-by-layer on Au with the capability to in situ measure the surface structure through an ethanol oxidation reaction. Spectroscopic characterizations reveal charge-transfer induced valence band restructuring in the Pd overlayer, which shifts the d-band center away from the Fermi level compared to bulk Pd. Precise overlayer control gives the optimal bimetallic surface of two monolayers (ML) Pd on Au, which exhibits more than 370-fold mass activity enhancement in oxygen reduction reaction (at 0.9 V vs. reversible hydrogen electrode) and 40 mV increase in half-wave potential compared to the Pt/C. Tested in a homemade Zn-air battery, the 2-ML-Pd/Au/C exhibits a maximum power density of 296 mW/cm2 and specific activity of 804 mAh/gZn, much higher than Pt/C with the same catalyst loading amount.
RESUMO
We explore the selective electrocatalytic hydrogenation of lignin monomers to methoxylated chemicals, of particular interest, when powered by renewable electricity. Prior studies, while advancing the field rapidly, have so far lacked the needed selectivity: when hydrogenating lignin-derived methoxylated monomers to methoxylated cyclohexanes, the desired methoxy group (-OCH3) has also been reduced. The ternary PtRhAu electrocatalysts developed herein selectively hydrogenate lignin monomers to methoxylated cyclohexanes-molecules with uses in pharmaceutics. Using X-ray absorption spectroscopy and in situ Raman spectroscopy, we find that Rh and Au modulate the electronic structure of Pt and that this modulating steers intermediate energetics on the electrocatalyst surface to facilitate the hydrogenation of lignin monomers and suppress C-OCH3 bond cleavage. As a result, PtRhAu electrocatalysts achieve a record 58% faradaic efficiency (FE) toward 2-methoxycyclohexanol from the lignin monomer guaiacol at 200 mA cm-2, representing a 1.9× advance in FE and a 4× increase in partial current density compared to the highest productivity prior reports. We demonstrate an integrated lignin biorefinery where wood-derived lignin monomers are selectively hydrogenated and funneled to methoxylated 2-methoxy-4-propylcyclohexanol using PtRhAu electrocatalysts. This work offers an opportunity for the sustainable electrocatalytic synthesis of methoxylated pharmaceuticals from renewable biomass.
RESUMO
Catalytic water splitting driven by renewable electricity offers a promising strategy to produce molecular hydrogen, but its efficiency is severely restricted by the sluggish kinetics of the anodic water oxidation reaction. Amorphous catalysts are reported to show better activities of water oxidation than their crystalline counterparts, but little is known about the underlying origin, which retards the development of high-performance amorphous oxygen evolution reaction catalysts. Herein, on the basis of cyclic voltammetry, electrochemical impedance spectroscopy, isotope labeling, and in situ X-ray absorption spectroscopy studies, we demonstrate that an amorphous catalyst can be electrochemically activated to expose active sites in the bulk thanks to the short-range order of the amorphous structure, which greatly increases the number of active sites and thus improves the electrocatalytic activity of the amorphous catalyst in water oxidation.
RESUMO
Heteroatom doped atomically dispersed Fe1 -NC catalysts have been found to show excellent activity toward oxygen reduction reaction (ORR). However, the origin of the enhanced activity is still controversial because the structure-function relationship governing the enhancement remains elusive. Herein, sulfur(S)-doped Fe1 -NC catalyst was obtained as a model, which displays a superior activity for ORR towards the traditional Fe-NC materials. 57 Fe Mössbauer spectroscopy and electron paramagnetic resonance spectroscopy revealed that incorporation of S in the second coordination sphere of Fe1 -NC can induce the transition of spin polarization configuration. Operando 57 Fe Mössbauer spectra definitively identified the low spin single-Fe3+ -atom of C-FeN4 -S moiety as the active site for ORR. Moreover, DFT calculations unveiled that lower spin state of the Fe center after the S doping promotes OH* desorption process. This work elucidates the underlying mechanisms towards S doping for enhancing ORR activity, and paves a way to investigate the function of broader heteroatom doped Fe1 -NC catalysts to offer a general guideline for spin-state-determined ORR.
RESUMO
The electroreduction of carbon dioxide (CO2RR) to valuable chemicals is a promising avenue for the storage of intermittent renewable electricity. Renewable methane, obtained via CO2RR using renewable electricity as energy input, has the potential to serve as a carbon-neutral fuel or chemical feedstock, and it is of particular interest in view of the well-established infrastructure for its storage, distribution, and utilization. However, CO2RR to methane still suffers from low selectivity at commercially relevant current densities (>100 mA cm-2). Density functional theory calculations herein reveal that lowering *CO2 coverage on the Cu surface decreases the coverage of the *CO intermediate, and then this favors the protonation of *CO to *CHO, a key intermediate for methane generation, compared to the competing step, C-C coupling. We therefore pursue an experimental strategy wherein we control local CO2 availability on a Cu catalyst by tuning the concentration of CO2 in the gas stream and regulate the reaction rate through the current density. We achieve as a result a methane Faradaic efficiency (FE) of (48 ± 2)% with a partial current density of (108 ± 5) mA cm-2 and a methane cathodic energy efficiency of 20% using a dilute CO2 gas stream. We report stable methane electrosynthesis for 22 h. These findings offer routes to produce methane with high FE and high conversion rate in CO2RR and also make direct use of dilute CO2 feedstocks.
RESUMO
Designing effective electrocatalysts for the carbon dioxide reduction reaction (CO2 RR) is an appealing approach to tackling the challenges posed by rising CO2 levels and realizing a closed carbon cycle. However, fundamental understanding of the complicated CO2 RR mechanism in CO2 electrocatalysis is still lacking because model systems are limited. We have designed a model nickel single-atom catalyst (Ni SAC) with a uniform structure and well-defined Ni-N4 moiety on a conductive carbon support with which to explore the electrochemical CO2 RR. Operando X-ray absorption near-edge structure spectroscopy, Raman spectroscopy, and near-ambient X-ray photoelectron spectroscopy, revealed that Ni+ in the Ni SAC was highly active for CO2 activation, and functioned as an authentic catalytically active site for the CO2 RR. Furthermore, through combination with a kinetics study, the rate-determining step of the CO2 RR was determined to be *CO2 - +H+ â*COOH. This study tackles the four challenges faced by the CO2 RR; namely, activity, selectivity, stability, and dynamics.