Spatial recognition of defects and tube type in carbon nanotube field effect transistors using electrostatic force microscopy.

The exceedingly high current capacity of single wall carbon nanotubes (SWCNTs) and the high currents that SWCNT thin films can sustain are driving significant efforts to fabricate high quality horizontally aligned SWCNTs. Dielectrophoresis is being increasingly used to prepare aligned nanotubes. However, the aligned nanotubes are generally of low quality since the processing involved can introduce defects. In addition, in arrays of tubes, tube-tube contact resistance can be high. Electrostatic force microscopy is a technique similar to atomic force microscopy, but in this case a bias voltage between the conductive tip and sample enables one to probe the long range electrostatic force. In this study we confirm that the technique can be successfully used to spatially determine defects, crossover points between tubes and nanotube electronic type.

CVD-grown horizontally aligned single-walled carbon nanotubes: synthesis routes and growth mechanisms.

Single-walled carbon nanotubes (SWCNTs) have attractive electrical and physical properties, which make them very promising for use in various applications. For some applications however, in particular those involving electronics, SWCNTs need to be synthesized with a high degree of control with respect to yield, length, alignment, diameter, and chirality. With this in mind, a great deal of effort is being directed to the precision control of vertically and horizontally aligned nanotubes. In this review the focus is on the latter, horizontally aligned tubes grown by chemical vapor deposition (CVD). The reader is provided with an in-depth review of the established vapor deposition orientation techniques. Detailed discussions on the characterization routes, growth parameters, and growth mechanisms are also provided.

Multisite Dopamine Sensing With Femtomolar Resolution Using a CMOS Enabled Aptasensor Chip.

Many biomarkers including neurotransmitters are found in external body fluids, such as sweat or saliva, but at lower titration levels than they are present in blood. Efficient detection of such biomarkers thus requires, on the one hand, to use techniques offering high sensitivity, and, on the other hand, to use a miniaturized format to carry out diagnostics in a minimally invasive way. Here, we present the hybrid integration of bottom-up silicon-nanowire Schottky-junction FETs (SiNW SJ-FETs) with complementary-metal-oxide-semiconductor (CMOS) readout and amplification electronics to establish a robust biosensing platform with 32 × 32 aptasensor measurement sites at a 100 µm pitch. The applied hetero-junctions yield a selective biomolecular detection down to femtomolar concentrations. Selective and multi-site detection of dopamine is demonstrated at an outstanding sensitivity of ∼1 V/fM. The integrated platform offers great potential for detecting biomarkers at high dilution levels and could be applied, for example, to diagnosing neurodegenerative diseases or monitoring therapy progress based on patient samples, such as tear liquid, saliva, or eccrine sweat.

Rabies Virus Populations in Humans and Mice Show Minor Inter-Host Variability within Various Central Nervous System Regions and Peripheral Tissues.

Rabies virus (RABV) has a broad host range and infects multiple cell types throughout the infection cycle. Next-generation sequencing (NGS) and minor variant analysis are powerful tools for studying virus populations within specific hosts and tissues, leading to novel insights into the mechanisms of host-switching and key factors for infecting specific cell types. In this study we investigated RABV populations and minor variants in both original (non-passaged) samples and in vitro-passaged isolates of various CNS regions (hippocampus, medulla oblongata and spinal cord) of a fatal human rabies case, and of multiple CNS and non-CNS tissues of experimentally infected mice. No differences in virus populations were detected between the human CNS regions, and only one non-synonymous single nucleotide polymorphism (SNP) was detected in the fifth in vitro passage of virus isolated from the spinal cord. However, the appearance of this SNP shows the importance of sequencing newly passaged virus stocks before further use. Similarly, we did not detect apparent differences in virus populations isolated from different CNS and non-CNS tissues of experimentally infected mice. Sequencing of viruses obtained from pharyngeal swab and salivary gland proved difficult, and we propose methods for improving sampling.

Polarizability of DNA block copolymer nanoparticles observed by electrostatic force microscopy.

In this study, DNA block copolymer (DBC) micelles with a polystyrene (PS) core and a single-stranded (ss) DNA shell were doped with ferrocene (Fc) molecules. Tapping mode atomic force microscopy (AFM) was used to study the morphology of the doped and undoped block copolymer aggregates. We show that introducing Fc molecules into the hydrophobic core does not affect the structural properties such as shape or size. In contrast, doping with Fc significantly changes the micelles' electrical properties, namely their polarizability. Electrostatic force microscopy (EFM) measurements reveal that the undoped micelles show no significant polarization signal, while the Fc-doped aggregates exhibit strongly enhanced polarizability. Furthermore, the nucleic acid moieties were utilized in combination with complementary ssDNA strands to assemble single particles into linear arrays of DBC nanoobjects. The ability to tune the electrostatic properties of the polymer core and the presence of nucleic acids might open the way for using these bioorganic nanoparticles as building blocks for nanoelectronic or biosensing devices.

First molecular analysis of rabies virus in Qatar and clinical cases imported into Qatar, a case report.

Identifying the origin of the rabies virus (RABV) infection may have significant implications for control measures. Here, we identified the source of a RABV infection of two Nepalese migrants in Qatar by comparing their RABV genomes with RABV genomes isolated from the brains of a RABV infected camel and fox from Qatar.

Current Progress in the Chemical Vapor Deposition of Type-Selected Horizontally Aligned Single-Walled Carbon Nanotubes.

Exciting electrical properties of single-walled carbon nanotubes show promise as a future class of electronic materials, yet the manufacturing challenges remain significant. The key challenges are to determine fabrication approaches for complex and flexible arrangements of nanotube devices that are reliable, rapid, and reproducible. Realizing regular array structures is an important step toward this goal. Considerable efforts have and are being made in this vein, although the progress to date is somewhat modest. However, there are reasons to be optimistic. Positive steps of being able to control not only the spatial location and diameter of the tubes but also their electronic type (chiral control) are being made. Two primary approaches are being exploited to address the challenges. Tube deposition techniques, on the one hand, and direct growth of the desired tube at the target location are being explored. While this review covers both approaches, the emphasis is on recent developments in the direct fabrication of type-selected horizontally aligned single-walled carbon nanotubes by chemical vapor deposition.

Growth of all-carbon horizontally aligned single-walled carbon nanotubes nucleated from fullerene-based structures.

All-carbon single-walled carbon nanotubes (SWCNTs) were successfully synthesized, nucleated using a fullerene derivative. A systematic investigation into the initial preparation of C60 fullerenes as growth nucleators for the SWCNTs was conducted. Enhancement in the yield of the produced SWCNT has been achieved with exploring different dispersing media for the fullerenes, the period, and environment of the initial thermal treatment of the fullerenes in addition to the use of different fullerene-based structures. The systematic studies significantly advance our understanding of the growth of the all-carbon catalyst-free single-walled carbon nanotubes. Field-effect transistors were fabricated using the catalyst-free SWCNT and then electrically characterized, showing current capacity as high as the well-studied catalyst-assisted nanotubes.

Understanding high-yield catalyst-free growth of horizontally aligned single-walled carbon nanotubes nucleated by activated C60 species.

Our understanding of the catalyst-free growth of single-walled carbon nanotubes by chemical vapor deposition is limited. Toward improving our knowledge base, we conducted systematic investigations into the initial preparation of C(60) fullerenes as nucleation precursors for single-wall and even double-wall carbon nanotube fabrication. The role of the dispersing media is shown to be crucial and is related to the initial fullerene cluster size. Oxygen-based groups, in particular, epoxy groups, are shown to be vital prior to actual growth. Moreover, the presence of oxygen groups during the growth phase is necessary for tube development. We also demonstrate the possibility of fabricating the tubes in crossbar configurations with bespoke crossing angles in a single synthesis step, unlike other routes which require at least two synthesis steps. The systematic studies significantly advance our understanding of the growth mechanisms involved in all-carbon catalyst-free growth of single- and double-walled carbon nanotubes.

Synthesis of carbon nanotubes with and without catalyst particles.

The initial development of carbon nanotube synthesis revolved heavily around the use of 3d valence transition metals such as Fe, Ni, and Co. More recently, noble metals (e.g. Au) and poor metals (e.g. In, Pb) have been shown to also yield carbon nanotubes. In addition, various ceramics and semiconductors can serve as catalytic particles suitable for tube formation and in some cases hybrid metal/metal oxide systems are possible. All-carbon systems for carbon nanotube growth without any catalytic particles have also been demonstrated. These different growth systems are briefly examined in this article and serve to highlight the breadth of avenues available for carbon nanotube synthesis.

Graphene: Piecing it together.

Graphene has a multitude of striking properties that make it an exceedingly attractive material for various applications, many of which will emerge over the next decade. However, one of the most promising applications lie in exploiting its peculiar electronic properties which are governed by its electrons obeying a linear dispersion relation. This leads to the observation of half integer quantum hall effect and the absence of localization. The latter is attractive for graphene-based field effect transistors. However, if graphene is to be the material for future electronics, then significant hurdles need to be surmounted, namely, it needs to be mass produced in an economically viable manner and be of high crystalline quality with no or virtually no defects or grains boundaries. Moreover, it will need to be processable with atomic precision. Hence, the future of graphene as a material for electronic based devices will depend heavily on our ability to piece graphene together as a single crystal and define its edges with atomic precision. In this progress report, the properties of graphene that make it so attractive as a material for electronics is introduced to the reader. The focus then centers on current synthesis strategies for graphene and their weaknesses in terms of electronics applications are highlighted.

Unravelling the mechanisms behind mixed catalysts for the high yield production of single-walled carbon nanotubes.

The use of mixed catalysts for the high-yield production of single-walled carbon nanotubes is well-known. The mechanisms behind the improved yield are poorly understood. In this study, we systematically explore different catalyst combinations from Ni, Co, and Mo for the synthesis of carbon nanotubes via laser evaporation. Our findings reveal that the mixing of catalysts alters the catalyst cluster size distribution, maximizing the clusters' potential to form a hemispherical cap at nucleation and, hence, form a single-walled carbon nanotube. This process significantly improves the single-walled carbon nanotube yields.

Multitypic hepatitis C virus infection identified by real-time nucleotide sequencing of minority genotypes.

The prevalence of concurrent multitypic hepatitis C virus (HCV) infection is uncertain. A sensitive and specific approach to identifying minority HCV genotypes in blood is presented. Following serum extraction and reverse transcription PCR to amplify cDNA originating from the viral 5' noncoding region, the amplified product mixture was treated with genotype-specific restriction endonuclease to digest the dominant genotype. Residual amplicons were subjected to PCR cloning and then to real-time DNA sequencing using a Pyrosequencer to identify the remaining genotypes. Dilution experiments showed that minority genotypes may be detected when they represent 1:10,000 of the total population and in serum specimens with viral loads as low as 1,000 IU/ml. Of 37 patients with bleeding disorders and 44 injecting drug users, infection by more than one HCV genotype was found in 7 (19%) and 4 (9%) patients, respectively. The low rate of detection in people at high risk of repeated HCV infection suggests that multitypic HCV carriage is uncommon.