[Association between working in small-scale cultivated land as a daily-life task and the physical and cognitive functions among elderly people in hilly and mountainous areas].

AIM: This study aimed to verify whether working in cultivated land as a daily-life task contributes to the maintenance and improvement of physical and cognitive functions. METHODS: The participants were 91 elderly people of ≥65 years of age who owned cultivated land in the mountainous Koyadaira district in Tokushima Prefecture. Sex, age, body mass index (BMI), walking speed as a physical function, and the mini-mental status examination (MMSE) score as a cognitive function were measured and analyzed in addition to the total working hours per week (WH) in cultivated land. RESULTS: The participants were 31 males and 60 females (mean age 78.5±6.6 years). The average values of the evaluated variables were as follows: WH, 18.0±13.2; BMI, 23.4±3.0 kg/m2; walking speed, 0.95±0.28 m/s; and MMSE score, 26.6±3.1 points. In addition, the Mann-Whitney U test and the Chi-square test showed no significant differences between sexes for each item. A logistic regression analysis showed that WH was significantly associated with MMSE (1, ≥28 points; 0, <28 points), and the odds ratio was 1.054 (p=0.010) in the model adjusted for age and BMI, while it was not significantly associated with walking speed (1, ≥1 m/s; 0, <1 m/s). CONCLUSIONS: Working on small-scale cultivated land was significantly associated with the cognitive function but not the physical function. Routine work on small-scale cultivated land as a daily-life task would contribute to the suppression of cognitive decline in older people living in hilly and mountainous areas.

Effects of Candidalysin Derived from Candida albicans on the Expression of Pro-Inflammatory Mediators in Human Gingival Fibroblasts.

Candida albicans (Ca) is frequently detected in the peri-implant sulcus with peri-implantitis, a major postoperative complication after oral implant therapy. However, the involvement of Ca in the pathogenesis of peri-implantitis remains unclear. In this study, we aimed to clarify Ca prevalence in the peri-implant sulcus and investigated the effects of candidalysin (Clys), a toxin produced by Ca, on human gingival fibroblasts (HGFs). Peri-implant crevicular fluid (PICF) was cultured using CHROMagar and Ca colonization rate and colony numbers were calculated. The levels of interleukin (IL)-1ß and soluble IL-6 receptor (sIL-6R) in PICF were quantified by enzyme-linked immunosorbent assay (ELISA). Pro-inflammatory mediator production and intracellular signaling pathway (MAPK) activation in HGFs were measured by ELISA and Western blotting, respectively. The Ca colonization rate and the average number of colonies in the peri-implantitis group tended to be higher than those in the healthy group. IL-1ß and sIL-6R levels in the PICF were significantly higher in the peri-implantitis group than in the healthy group. Clys significantly induced IL-6 and pro-matrix metalloproteinase (MMP)-1 productions in HGFs, and co-stimulation with Clys and sIL-6R increased IL-6, pro-MMP-1, and IL-8 production levels in HGFs compared with Clys stimulation alone. These findings suggest that Clys from Ca plays a role in the pathogenesis of peri-implantitis by inducing pro-inflammatory mediators.

Current development status of additive manufacturing technologies for fabricating removable partial denture frameworks: a literature review.

AIM: The aim of the present study was to review the current development status of additive manufacturing (AM) technology for fabricating frameworks for removable partial dentures (RPDs) considering fit accuracy, surface condition, and mechanical strength. METHODS: A search of the databases of MEDLINE, Cochrane Library, and Science Direct was conducted using definite keywords ("removable partial denture" or "framework" or "dental prosthesis design") and ("additive manufacturing technology" or "rapid prototyping" or "3D-printing"). RESULT: A total of 23 articles were selected according to certain inclusion criteria. The direct AM techniques were applied to manufacture metal RPD frameworks consisting of selective laser melting (SLM), selective laser sintering (SLS), and metal binder jetting (MBJ). The SLM technique showed a good surface and mechanical strength, but low accuracy. The SLS technique showed higher accuracy than indirect AM, but further studies are required. The MBJ technique showed lower accuracy and a rougher surface than the conventional method. CONCLUSION: AM techniques can produce RPD frameworks within the acceptable range for clinical practice; however, more clinical studies are needed.

Assessment of potential clinical cascade between oral hypofunction and physical frailty: Covariance structure analysis in a cross-sectional study.

No report has yet examined the impact of oral hypofunction on physical frailty in relation to intra-relationships of physical frailty assessment items. The purpose of this study was to verify the potential of a clinical cascade between oral hypofunction and physical frailty, and especially to support the hypothesis that the influence of oral hypofunction on physical frailty is greater than the intra-relationships among elements of physical frailty and that sex differences significantly affect these relationships. The participants were 272 older adults (101 men and 171 women; mean age 75.1 ± 7.5 years). Maximum occlusal force (MOF) and oral dryness (OD), as indicators of oral hypofunction, and grip strength (GS) and walking speed (WS), as indicators of physical frailty, were measured. Mutual relationship of four variables was verified using covariance structure analysis. In men, three paths from MOF to WS and GS and from WS to GS were confirmed, and those from MOF to WS and from WS to GS were found to be significant (P < .01). In women, three paths from MOF to WS and GS and from WS to GS were also confirmed, as with the men, and those from MOF to WS and from MOF to GS were found to be significant (P < .01). Model adaptability was shown to be good for both men and women. The results suggest our hypothesis was verified, and it is expected that the early detection of oral hypofunction, that is MOF, may be important for assessing physical frailty, especially in women.

Prefrontal cortex activity induced by periodontal afferent inputs downregulates occlusal force.

The prefrontal cortex (PFC) plays an important role in several cognitive functions, such as planning, decision making, and social behavior. We previously reported that periodontal sensory input significantly increases PFC activity during the motor task of maintaining occlusal (biting) force. However, the relationships between periodontal sensation, PFC activity, and the performance of motor tasks have not been evaluated in detail. Therefore, using functional near-infrared spectroscopy, we investigated PFC activity by monitoring changes in cerebral blood flow (CBF) to specific areas of the PFC that corresponded to changes in occlusal force generated during four different biting tasks: (1) occlusion with the central incisor with an interocclusal distance of 5 mm (BI-5 mm); or (2) 10 mm (BI-10 mm); (3) occlusion with the first molars with an interocclusal distance of 5 mm (BM-5 mm), or (4) 10 mm (BM-10 mm). Occlusion of molars generated increased PFC regional CBF as the interocclusal distance decreased (BM-10 mm vs BM-5 mm). No significant differences in CBF during occlusion of incisors were found when comparing 5 mm and 10 mm intercostal distances (BI-5 mm vs BI-10 mm). The mean occlusal force generated by BM-5 mm occlusion was significantly lower than that generated by BM-10 mm occlusion. Taken together, our results suggest that the PFC decreases efferent signaling to motor units, to reduce occlusal force generated when periodontal sensation, which is greater when the interocclusal distance is reduced, is primarily responsible for maintaining occlusal force in the absence of sensations from the temporomandibular joint and muscle spindles.

[The application and usefulness of virtual reality aimed at encouraging an understanding of and reducing and eliminating prejudice towards dementia patients among local residents].

AIM: To demonstrate the usefulness of a virtual reality device that authentically portrays the emotions of dementia patients and their families (VR Dementia Experience) for encouraging an understanding of and reducing and eliminating prejudice towards dementia patients among local residents. METHOD: In Prefecture T, Town N, 85 residents of Neighborhood A were chosen as the intervention group, and 95 residents of Neighborhood B were chosen as the non-intervention group. The VR Dementia Experience was provided only to the residents of Neighborhood A. Residents of both neighborhoods completed a 35-item questionnaire regarding their degree of understanding and prejudice towards dementia patients before and after the intervention. RESULTS: Seventy-seven residents of Neighborhood A and 82 residents of Neighborhood B were analyzed. Their gender, age, and pre-intervention test baseline values were equivalent in the degree of understanding and prejudice. Significant increases were observed in 9 of 35 items for Neighborhood A residents (7 understanding-related, 2 prejudice-related) and 2 items for Neighborhood B residents (1 understanding-related, 1 prejudice-related). To ascertain the usefulness of the VR Dementia Experience, we compared the number of items with a significant increase: 9/35 (25.7%) in Neighborhood A and 2/35 (5.7%) in Neighborhood B. An effect (≥ 20%) was observed among the residents of Neighborhood A. Furthermore, after exposure to the VR Dementia Experience, the connection between understanding, prejudice, and dementia was strengthened among the residents of Neighborhood A compared to the residents of Neighborhood B. CONCLUSION: The VR Dementia Experience is a useful tool for encouraging an understanding of and reducing and eliminating prejudice towards dementia patients among local residents. However, to encourage the widespread usage of the technology, we should compare results with other public awareness campaigns as well as make improvements to the device and its VR content.

Antifungal and Mechanical Properties of Tissue Conditioner Containing Plant-Derived Component: An In Vitro Study.

PURPOSE: To evaluate the antifungal activity and mechanical properties of a novel antifungal tissue conditioner containing Juncus powder. MATERIALS AND METHODS: Juncus powder was mixed with GC tissue conditioner at concentrations of 2.5%, 5.0%, and 10.0% by mass. The cylindrical specimens of Juncus-mixed tissue conditioner (dimensions: 10 mm in diameter and 2 and 6 mm in height for antimicrobial and mechanical tests, respectively) were prepared. The specimens placed on the bottom of the 24-well tissue culture plate were cultured with Candida albicans CAD1 for 2 and 4 days. The proliferation of the C. albicans in the wells was determined by measuring the optical density of fungal culture, and the surface of the specimens were also observed by scanning electron microscopy (SEM). To assess the mechanical properties of the specimens, the fluidity and hardness of Juncus-mixed tissue conditioner were measured using the methods certified according to ISO 10139-1. RESULTS: Juncus-mixed tissue conditioner significantly exhibited growth inhibitory effect in a Juncus concentration-dependent manner after both 2- and 4- day cultures. SEM observation showed that the amount of C. albicans on Juncus-mixed specimens drastically decreased, and biofilm formation was markedly inhibited. Moreover, both mechanical properties were found to be within the ranges regulated and specified by ISO. CONCLUSION: These findings demonstrated that the tissue conditioner including Juncus powder has a significant growth inhibitory effect against C. albicans, and it is suggested that the application of Juncus-mixed tissue conditioner may prevent denture stomatitis and oral candidiasis in denture wearers.

A critical role for thymic stromal lymphopoietin in nickel-induced allergy in mice.

Ni is the most frequent cause of contact allergy induced by metals. However, the underlying mechanism of this induction is unknown. Our previous research demonstrates that activation of dendritic cells (DCs) through p38MAPK/MKK6 is required for Ni-induced allergy in mice. In the current study, we investigated the cellular and molecular mechanisms underlying Ni-induced allergy using a mouse model that involves injecting Ni into the ear, with or without Freund's incomplete or complete adjuvants. Nickel had greater potential to cause allergic reactions compared with palladium and gold. Among the proteins expressed at higher levels in mice with Ni-induced allergy, we focused on thymic stromal lymphopoietin (TSLP), which is produced in abundance by keratinocytes. We detected increased expression of the TSLP receptor (TSLPR) in DCs from cervical lymph nodes of mice with Ni-induced allergy, suggesting that DCs in ear tissues were activated through TSLPR signaling induced by keratinocyte-derived TSLP. Furthermore, delayed-type hypersensitivity reactions in mice with Ni-induced allergy were decreased significantly by injection of a Tslp-short interfering RNA along with atelocollagen in the ear skin. These results suggest that Ni allergy may be triggered by a TSLP/TSLPR-mediated interaction between epithelial and immune cells.

Development of a digital impression procedure using photogrammetry for complete denture fabrication.

OBJECTIVES: We developed an innovative procedure for digitizing maxillary edentulous residual ridges with a photogrammetric system capable of estimating three-dimensional (3D) digital forms from multiple two-dimensional (2D) digital images. The aim of this study was to validate the effectiveness of the photogrammetric system. MATERIALS AND METHODS: Impressions of the maxillary residual ridges of five edentulous patients were taken with four kinds of procedures: three conventional impression procedures and the photogrammetric system. Plaster models were fabricated from conventional impressions and digitized with a 3D scanner. Two 3D forms out of four forms were superimposed with 3D inspection software, and differences were evaluated using a least squares best fit algorithm. RESULTS: The in vitro experiment suggested that better imaging conditions were in the horizontal range of ± 15 degrees and at a vertical angle of 45 degrees. The mean difference between the photogrammetric image (Form A) and the image taken from conventional preliminarily impression (Form C) was 0.52 ± 0.22 mm. The mean difference between the image taken of final impression through a special tray (Form B) and Form C was 0.26 ± 0.06 mm. The mean difference between the image taken from conventional final impression (Form D) and Form C was 0.25 ± 0.07 mm. The difference between Forms A and C was significantly larger than the differences between Forms B and C and between Forms D and C. CONCLUSION: The results of this study suggest that obtaining digital impressions of edentulous residual ridges using a photogrammetric system is feasible and available for clinical use.

Part-Digitizing System of Impression and Interocclusal Record for Complete Denture Fabrication.

Few studies have reported the application of digital technology to removable dentures, particularly for the process of impression and interocclusal recording for complete denture fabrication. This article describes a part-digitizing system of impression and interocclusal records for complete denture fabrication. The denture foundation area in an edentulous mouth, including the border areas and residual ridge, is outlined by tracing the surfaces with a 3-D pen-type digitizer. Specialized trays for final impressions and interocclusal records were generated using computer-aided design and manufactured using the digital data. Final impression and interocclusal records were carried out using these specialized trays. The computer-aided method using preliminary digital impressions and specialized trays would be feasible for clinical use for complete denture fabrication.

Influence of matrix attachment installation load on movement and resultant forces in implant overdentures.

PURPOSE: This in vitro study investigated the effect of attachment installation conditions on the load transfer and denture movements of implant overdentures, and aims to clarify the differences among the three types of attachments, namely ball, Locator, and magnet attachments. MATERIALS AND METHODS: Three types of attachments, namely ball, Locator, and magnetic attachments were used. An acrylic resin mandibular edentulous model with two implants placed in the bilateral canine regions and removable overdenture were prepared. The two implants and bilateral molar ridges were connected to three-axis load-cell transducers, and a universal testing machine was used to apply a 50 N vertical force to each site of the occlusal table in the first molar region. The denture movement was measured using a G(2) motion sensor. Three installation conditions, namely, the application of 0, 50, and 100 N loads were used to install each attachment on the denture base. The load transfer and denture movement were then evaluated. RESULTS: The resultant force decreased with increasing installation load for all attachments. In particular, the resultant force on implants on the loading side of the Locator attachment significantly decreased when the installation load was increased from 0 to 50 N, and that for magnetic attachment significantly decreased when the installation load was increased from 50 to 100 N. For the residual ridges on the loading side, the direction of the forces for all attachments changed to downward with increasing installation load. Furthermore, the yaw Euler angle increased with increasing installation load for the magnetic attachment. CONCLUSIONS: Subject to the limitations of this study, the use of any installation load greater than 0 N is recommended for the installation of ball and Locator attachments on a denture base. Regarding magnetic attachments, our results also recommend installation on a denture base using any installation load greater than 0 N, and suggest that the resultant force acting on the implant can be decreased by increasing the installation load; however, a large installation load of 100 N should be avoided when installing the attachment on the denture base to avoid increasing the denture movement.

Do sensation differences exist between dental implants and natural teeth?: a meta-analysis.

OBJECTIVE: The purpose of this systematic review was to survey evidence pertaining to the sensation differences between natural teeth and osseointegrated dental implants. MATERIAL AND METHODS: Using the MEDLINE (online PubMed) database, Cochrane Library, and Scientific Citation index, we performed a systematic search of articles. We used the following search terms: "perception or sensation and dental implant." The systematic review of the extracted articles was performed to see the sensation differences between natural teeth and dental implants. RESULTS: A total of six studies on oral sensation, "tactile sensibility," and "thickness discrimination" were included in the meta-analysis. As to the "tactile sensibility", all studies indicated the threshold levels of the implants were about 4-20 times higher than that of natural teeth. The tactile sensibility of an implant was significantly higher than that of a natural tooth, with an standardized mean difference (SMD) of 8.3619 (95% CI, 6.3920-10.3317) and a P < 0.0001. As to the "thickness discrimination", all studies indicated the threshold levels of implants were about 1.2-2.3 times higher than that of natural teeth. The thickness discrimination was significantly higher than that of natural teeth with an SMD of 1.2368 (95% CI, 0.8699-1.6038) and a P < 0.0001. CONCLUSION: This meta-analysis suggested that both tactile sensibility and thickness discrimination thresholds of implants were significantly higher than those of natural teeth. This meta-analysis reconfirms that sensation differences between dental implants and natural teeth exist.

Relationship between mouthful volume and number of chews in young Japanese females.

OBJECTIVE: Modification of eating behavior in Japan is promoted to prevent overweight and obesity, but the effects of such modifications are unclear. This study aimed to clarify the inter- and intra-individual relationship between bite size and number of chews of food. DESIGN AND METHODS: Subjects comprised of 50 young healthy Japanese women (mean age 19.5 years). Food materials were boiled rice and apple. First, the average bite size and the number of chews per mouthful of food were calculated across the study cohort. The number of chews was counted by the subjects themselves and then self-reported. Correlation between the individual one-bite volume and the number of chews per volume was analyzed using Spearman's rank correlation coefficient. Second, the number of chews for three different sized bites of food (half of one bite, one bite, and one-and-a-half bites) were calculated as a prospective observational study. The number of chews for each of the three volumes of food was compared using one way ANOVA with Bonferroni correction. RESULTS: For both food types, there was a negative correlation between individual mouthful volume and number of chews for both food materials. The number of chews per volume decreased as bite sizes increased. CONCLUSION: This study demonstrated an inter- and intra-individual relationship between bite size and the number of chews and suggested that smaller bite sizes were associated with more chews per volume of food.

Mouth breathing reduces oral function in adolescence.

Although humans breathe naturally through the nostrils, mouth breathing in children has recently gathered attention. In this study, we hypothesized that tongue function and its related maxillofacial morphology would affect breathing in adolescence. To verify this hypothesis, we examined the association between breathing patterns, including mouth and nasal breathing; oral functions, including tongue motor function; and craniofacial morphology during adolescence, which has not been investigated till date. C3-H, which indicates the anteroposterior position of the hyoid bone in relation to the third cervical vertebra, was significantly smaller in mouth-breathers than in nasal-breathers. Lip-closing force, tongue pressure, and masticatory efficiency were lower in the order of nasal-breathers, oronasal-breathers, and mouth-breathers, and the values for mouth-breathers were significantly lower than those for nasal-breathers. Tongue pressure alone was identified as a significant independent variable, with an odds ratio of 1.063 (95% confidence interval, 1.006-1.123; p < 0.05). Our results indicate a relationship between mouth breathing and the lip-closing force, tongue pressure, and masticatory efficiency, as well as the significance of tongue pressure on mouth breathing in adolescents. The findings highlight the importance of clarifying the pathophysiology of mouth breathing and its underlying causes.

Social frailty as a predictor of all-cause mortality and functional disability: a systematic review and meta-analysis.

The association between social frailty and adverse health outcomes, especially mortality and functional disability, which are essential health outcomes, has not been systematically summarized or meta-analyzed. In this study, we conducted a systematic review and meta-analysis of the impact of social frailty on all-cause mortality and functional disability, while addressing the components of social frailty. In this study, social frailty was operationally defined in alignment with the previous literature, as follows: "a state of increased vulnerability to the interactive back-and-forth of the community, including general resources, social resources, social behaviors, and needs." Hazard ratios or odds ratios described in each selected literature were used as the meta-analytic results. Considering the impact of social frailty on all-cause mortality, the hazard ratio was 1.96 (95% CI 1.20-3.19), indicating a significant association between the two but high heterogeneity. The hazard and odds ratios for the impact of social frailty on functional disability were 1.43 (95% CI 1.20-1.69) and 2.06 (95% CI 1.55-2.74), respectively. A significant association was found between social frailty and functional disability; both hazard and odds ratios were found, and low heterogeneity between these articles was observed. These results highlight the importance of assessing social frailty using more standardized methods and examining its effects on various health outcomes.

Biopsychosocial Consideration of Ikigai in Older Adults in Japan through a Cross-Sectional Study.

Ikigai-a Japanese concept that includes elements such as life's purpose and meaning-has been reported to be associated with various systemic health conditions, such as the risk of developing physical dysfunction or death in older adults. However, there are no reports that comprehensively examine the psychological and social aspects of Ikigai. We attempted to clarify the characteristics of Ikigai by examining it from a biopsychosocial model using physical, psychological, and social perspectives through a cross-sectional study on sarcopenia, frailty and healthy life expectancy in a hilly and mountainous area of Japan. Koyadaira in Mima City, which is located in a hilly and mountainous region on Shikoku Island in Japan, was targeted. This cross-sectional study included 105 outpatients aged 65 and over, with an average age of 79.02 ± 6.91 years. Ikigai (self-rating score on a scale of 0 (no Ikigai) to 5 (the highest Ikigai)) participants' level of physical activity (the Physical Activity Scale for the Elderly, PASE), degree of depression (the Geriatric Depression-15 Scale, GDS-15), cognitive function (the Mini-Mental State Examination, MMSE) and social isolation (the abbreviated Lubben Social Network Scale, LSNS-6) was assessed. Significant positive correlations were found between PASE and MMSE. The LSNS-6 significantly correlated with the MMSE and GDS-15. In a path model, out of four paths from PASE, GDS-15, MMSE, and LSNS-6 to Ikigai, the path from the GDS-15 alone was significant (correlation coefficient -0.271, p < 0.01). The adaptability of this model was good. This study indicates that depressive status has a large impact on Ikigai, along with physical, cognitive, and social conditions; thus, it is appropriate to consider that an affective psychological status, such as depressive symptoms, is a fundamental condition for having Ikigai.

Effect of denture adhesives on masticatory performance: Multicenter randomized controlled trial.

PURPOSE: The purpose of this study is to investigate the effects of denture adhesives on masticatory performance via a 10-center, parallel, randomized, controlled trial of complete denture wearers in Japan. METHODS: The trial was conducted between September 2013 and October 2016. The inclusion criteria were complete edentulism, willingness to undergo new complete denture treatment, and willingness to return for recall treatment. The exclusion criteria were age 90 years or older, presence of severe systemic illness, inability to understand the questionnaires, wearing metal base complete dentures, denture adhesive user, wearing prosthetics for maxillofacial defects, wearing complete dentures with tissue conditioners, and severe xerostomia. Randomization of the powder-type denture adhesive (powder), cream-type denture adhesive (cream), and control (saline) groups was performed using a sealed envelope system. Masticatory performance was measured using color-changeable chewing gum. Intervention blinding was not feasible. RESULTS: Sixty-seven control, 69 powder, and 64 cream participants are analyzed using the intention-to-treat principle. The participants in all groups show significantly improved masticatory performance at post-intervention (paired t-test with Bonferroni correction P < 0.0001). However, no significant difference in masticatory performance is detected among the three groups (one-way analysis of variance). A significant negative correlation between pre- and post-changes in masticatory performance and intraoral condition scores is observed (Pearson's correlation coefficient, P < 0.0001). CONCLUSIONS: Although denture adhesives improved the masticatory performance of complete denture wearers, their clinical effects are comparable to those of saline solution. The use of denture adhesives is more effective in complete denture wearers with unsatisfactory intraoral conditions.