The role of the shell in core-shell-structured La-doped NaTaO3 photocatalysts.

NaTaO3, a semiconductor with a perovskite structure, has long been known as a highly active photocatalyst for overall water splitting when appropriately doped with La cations. A profound understanding of the surface feature and why and how it may control the water splitting activity is critical because redox reactions take place at the surface. One surface feature characteristic of La-doped NaTaO3 is a La-rich layer (shell) capping La-poor bulk (core). In this study, we investigate the role of the shell in core-shell-structured La-doped NaTaO3 through systematic chemical etching with an aqueous HF solution. We find that the La-rich shell plays a role in electron-hole recombination, electron mobility and water splitting activity. The shallow electron traps populating the La-rich shell trap the photoexcited electrons, decreasing their mobility. The shallowly trapped electrons remain reactive and are readily available on the surface to be extracted by the cocatalysts for the reduction reaction evolving H2. The presently employed chemical etching method also confirms the presence of a La concentration gradient in the core that regulates the steady-state electron population and water splitting activity. Here, we successfully reveal the nanoarchitecture-photoactivity relationship of core-shell-structured La-doped NaTaO3 that thereby allows tuning of the surface features and spatial distribution of dopants to increase the concentration of photoexcited electrons and therefore the water splitting activity. By recognizing the key factors that control the photocatalytic properties of a highly active catalyst, we can then devise proper strategies to design new photocatalyst materials with breakthrough performances.

Dopant site in indium-doped SrTiO3 photocatalysts.

Strontium titanate, SrTiO3, with the perovskite ABO3 structure is known as one of the most efficient photocatalyst materials for the overall water splitting reaction. Doping with appropriate metal cations at the A site or at the B site substantially increases the quantum yield to split water into H2 and O2. The site occupied by the guest dopant in the SrTiO3 host thus plays a key role in dictating the water splitting activity. However, little is known about the detailed structure of the dopant site in the host lattice. In this study, the local structure of In3+ cations, which were shown to improve the water splitting activity of SrTiO3, is investigated with X-ray absorption fine structure spectroscopy and density functional theory (DFT) calculations. The In3+ cations exclusively substitute for Ti4+ cations at the B site to form InO6 octahedra. Further optical experiments using UV-Vis diffuse reflectance spectroscopy and DFT calculations of the density of states indicate that the substitution of In3+ for Ti4+ does not alter the band structure and bandgap energy (remaining at 3.2 eV). The mechanism underlying the increased water splitting activity is discussed in relation to occupation of the B site by In3+ cations.

The atomic-scale structure of LaCrO3-NaTaO3 solid solution photocatalysts with enhanced electron population.

Visible light sensitization of sodium tantalate (NaTaO3), a highly UV-active material, is critical for realizing its practical application in photocatalytic water splitting under solar light. Double doping of a half-filled transition metal together with another metal for cationic charge balance is a promising way of sensitizing NaTaO3 to visible light. One fundamental issue is that the atomic-scale structure of such doubly doped NaTaO3 is not yet fully understood. In this study, we doubly doped NaTaO3 with La3+ and Cr3+ through a solid-state route. The occupation preference of La3+ in a doubly doped system was particularly studied by the extended X-ray absorption fine structure technique. We revealed the substitution of La3+ for Na+, and Cr3+ for Ta5+, forming a LaCrO3-NaTaO3 solid solution. We then showed that doping NaTaO3 with La3+ and Cr3+ appreciably increased the population of electrons photoexcited by either visible light or UV light. Photoactivation of the doubly doped NaTaO3 with visible light produced a population of electrons comparable to that under UV light. The charge compensation scheme of double doping with La3+ and Cr3+ is shown here to be a good option for the sensitization of NaTaO3 to visible light.

Magnetic Supramolecular Spherical Arrays: Direct Formation of Micellar Cubic Mesophase by Lanthanide Metallomesogens with 7-Coordination Geometry.

Here, an unprecedented phenomenon in which 7-coordinate lanthanide metallomesogens, which align via hydrogen bonds mediated by coordinated H2O molecules, form micellar cubic mesophases at room temperature, creating body-centered cubic (BCC)-type supramolecular spherical arrays, is reported. The results of experiments and molecular dynamics simulations reveal that spherical assemblies of three complexes surrounded by an amorphous alkyl domain spontaneously align in an energetically stable orientation to form the BCC structure. This phenomenon differs greatly from the conventional self-assembling behavior of 6-coordinated metallomesogens, which form columnar assemblies due to strong intermolecular interactions. Since the magnetic and luminescent properties of different lanthanides vary, adding arbitrary functions to spherical arrays is possible by selecting suitable lanthanides to be used. The method developed in this study using 7-coordinate lanthanide metallomesogens as building blocks is expected to lead to the rational development of micellar cubic mesophases.

Creation of a Highly Active Small Cu-Based Catalyst Derived from Copper Aluminium Layered Double Hydroxide Supported on α-Al2 O3 for Acceptorless Alcohol Dehydrogenation.

A highly dispersed carbonate-intercalated Cu2+ -Al3+ layered double hydroxide (CuAl LDH) was created on an unreactive α-Al2 O3 surface (CuAl LDH@α-Al2 O3 ) via a simple coprecipitation method of Cu2+ and Al3+ under alkaline conditions in the presence of α-Al2 O3 . A highly reducible CuO nanoparticles was generated, accompanied by the formation of CuAl2 O4 on the surface of α-Al2 O3 (CuAlO@α-Al2 O3 ) after calcination at 1073 K in air, as confirmed by powder X-ray diffraction (XRD) and Cu K-edge X-ray absorption near edge structure (XANES). The structural changes during the progressive heating process were monitored by using in-situ temperature-programmed synchrotron XRD (tp-SXRD). The layered structure of CuAl LDH@α-Al2 O3 completely disappeared at 473 K, and CuO or CuAl2 O4 phases began to appear at 823 K or 1023 K, respectively. Our synthesised CuAlO@α-Al2 O3 catalyst was highly active for the acceptorless dehydrogenation of benzylic, aliphatic, or cyclic aliphatic alcohols; the TON based on the amount of Cu increased to 163 from 3.3 of unsupported CuAlO catalyst in 1-phenylethanol dehydrogenation. The results suggested that Cu0 was obtained from the reduction of CuO in the catalyst matrix during the reaction without separate reduction procedure and acted as a catalytically active species.

A new binding motif of sterically demanding thiolates on a gold cluster.

A gold cluster, Au(41)(S-Eind)(12), was synthesized by ligating the bulky arenethiol 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacene-4-thiol (Eind-SH) to preformed Au clusters. Extended X-ray absorption fine structure, X-ray photoelectron spectroscopy, and the fragmentation pattern in the mass spectrometry analysis indicated that formation of gold-thiolate oligomers at the interface was suppressed, in sharp contrast to conventional thiolate-protected Au clusters.

Selective photocatalytic oxidation of alcohols to aldehydes in water by TiO2 partially coated with WO3.

Semiconductor TiO(2) particles loaded with WO(3) (WO(3)/TiO(2)), synthesized by impregnation of tungstic acid followed by calcination, were used for photocatalytic oxidation of alcohols in water with molecular oxygen under irradiation at λ>350 nm. The WO(3)/TiO(2) catalysts promote selective oxidation of alcohols to aldehydes and show higher catalytic activity than pure TiO(2). In particular, a catalyst loading 7.6 wt % WO(3) led to higher aldehyde selectivity than previously reported photocatalytic systems. The high aldehyde selectivity arises because subsequent photocatalytic decomposition of the formed aldehyde is suppressed on the catalyst. The TiO(2) surface of the catalyst, which is active for oxidation, is partially coated by the WO(3) layer, which leads to a decrease in the amount of formed aldehyde adsorbed on the TiO(2) surface. This suppresses subsequent decomposition of the aldehyde on the TiO(2) surface and results in high aldehyde selectivity. The WO(3)/TiO(2) catalyst can selectively oxidize various aromatic alcohols and is reusable without loss of catalytic activity or selectivity.

Effect of electronic structures of Au clusters stabilized by poly(N-vinyl-2-pyrrolidone) on aerobic oxidation catalysis.

Au clusters smaller than 1.5 nm and stabilized by poly(N-vinyl-2-pyrrolidone) (PVP) showed higher activity for aerobic oxidation of alcohol than those of larger size or stabilized by poly(allylamine) (PAA). X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy of adsorbed CO, and X-ray absorption near edge structure measurements revealed that the catalytically active Au clusters are negatively charged by electron donation from PVP, and the catalytic activity is enhanced with increasing electron density on the Au core. Based on similar observations of Au cluster anions in the gas phase, we propose that electron transfer from the anionic Au cores of Au:PVP into the LUMO (pi*) of O(2) generates superoxo- or peroxo-like species, which plays a key role in the oxidation of alcohol. On the basis of these results, a simple principle is presented for the synthesis of Au oxidation catalysts stabilized by organic molecules.

Enhanced oxygen reduction activity of platinum subnanocluster catalysts through charge redistribution.

Single-size platinum Pt6 subnanoclusters exhibit superior mass-specific and surface-specific activities for the oxygen reduction reaction. The enhanced activity is attributed to polarized electron distributions based on rigorous structure characterization by X-ray absorption fine structure spectroscopy and density functional theory.

Preparation of a Highly Stable Pd-Perovskite Catalyst for Suzuki Couplings via a Low-Temperature Hydrothermal Treatment.

Pd-perovskite (Pd-STO, STO = SrTiO3) was synthesized by a relatively low-temperature (373 K) hydrothermal method without calcination. The morphology of the Pd-STO could be controlled by adjusting the H2O/NH3 ratio during the fabrication of the amorphous titania. The Pd-STO catalyst showed better durability for Suzuki couplings than did Pd-impregnated catalysts on conventional supports.

Opening mechanism of internal nanoporosity of single-wall carbon nanohorn.

Single-wall carbon nanohorn (SWNH), which is a tubular particle with a cone cap, was oxidized in an oxygen flow at various temperatures. N(2) adsorption at 77 K, thermogravimetry (TG), differential thermal analysis (DTA), transmission electron microscopy, and Raman spectroscopy measurements were carried out on the oxidized SWNHs. The specific surface area of the oxidized SWNHs can be controlled by oxidation temperature, giving the maximum value of 1420 m(2)/g. The pore size distribution by the BJH method and the comparison plot of the N(2) adsorption isotherms of SWNH oxidized at different temperatures against that of as-grown SWNH revealed the minimum oxidation temperature for opening internal nanopores. TG-DTA analyses determined the components of as-grown SWNH: amorphous carbon 2.5 wt %, defective carbon at the cone part 15 wt %, tubular carbon 70 wt %, and graphitic carbon 12 wt %. These systematic analyses provided the exact internal nanopore volume of 0.49 mL/g for pure SWNH particles.

Selective synthesis of organogold magic clusters Au54(C≡CPh)26.

Organogold clusters Au(54)(C(2)Ph)(26) were selectively synthesized by reacting polymer-stabilized Au clusters (1.2 ± 0.2 nm) with excess phenylacetylene in chloroform.

Microfluidic synthesis and catalytic application of PVP-stabilized, approximately 1 nm gold clusters.

Small PVP-stabilized gold clusters were successfully prepared by the homogeneous mixing of continuous flows of aqueous AuCl 4 (-) and BH 4 (-) in a micromixer. Spectroscopic characterization revealed that microfluidic synthesis could yield monodisperse Au:PVP clusters with an average diameter of approximately 1 nm, which is smaller than clusters produced by conventional batch methods. These approximately 1 nm Au:PVP clusters exhibited higher catalytic activity for the aerobic oxidation of p-hydroxybenzyl alcohol than did Au:PVP clusters prepared by batch methods.

Colloidal gold nanoparticles as catalyst for carbon-carbon bond formation: application to aerobic homocoupling of phenylboronic acid in water.

Gold nanoparticles (<2 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NPs) were prepared by reduction of AuCl4- with NaBH4 in the presence of PVP and characterized via an array of methods including optical absorption spectroscopy, transmission electron microscopy, X-ray diffraction, X-ray absorption near-edge structure, extended X-ray absorption fine structure, and X-ray photoelectron spectroscopy. We demonstrate for the first time that the Au:PVP NPs act as catalyst toward homocoupling of phenylboronic acid in water under aerobic conditions. Suppression of biphenyl formation under anaerobic conditions indicates that molecular oxygen dissolved in water is intimately involved in the coupling reactions. A mechanism of the aerobic homocoupling catalyzed by the Au:PVP NPs is proposed on the basis of a crucial role of dissolved oxygen, steric effects on the product yields, and the well-established mechanism for the Pd(II)-based catalysts.