RESUMO
A high-quality nanostructured tin oxide (SnO2) has garnered massive attention as an electron transport layer (ETL) for efficient perovskite solar cells (PSCs). SnO2 is considered the most effective alternative to titanium oxide (TiO2) as ETL because of its low-temperature processing and promising optical and electrical characteristics. However, some essential modifications are still required to further improve the intrinsic characteristics of SnO2, such as mismatch band alignments, charge extraction, transportation, conductivity, and interfacial recombination losses. Herein, an inorganic-based cesium (Cs) dopant is used to modify the SnO2 ETL and to investigate the impact of Cs-dopant in curing interfacial defects, charge-carrier dynamics, and improving the optoelectronic characteristics of PSCs. The incorporation of Cs contents efficiently improves the perovskite film quality by enhancing the transparency, crystallinity, grain size, and light absorption and reduces the defect states and trap densities, resulting in an improved power conversion efficiency (PCE) of ≈22.1% with Cs:SnO2 ETL, in-contrast to pristine SnO2-based PSCs (20.23%). Moreover, the Cs-modified SnO2-based PSCs exhibit remarkable environmental stability in a relatively higher relative humidity environment (>65%) and without encapsulation. Therefore, this work suggests that Cs-doped SnO2 is a highly favorable electron extraction material for preparing highly efficient and air-stable planar PSCs.
RESUMO
Recently, multijunction tandem solar cells (TSCs) have presented high power conversion efficiency and revealed their immense potential in photovoltaic evolution. It isâ¯demonstrated that multiple light absorbers with various bandgap energiesâ¯overcome the Shockley-Queisser limit of single-junction solar cells by absorbing the wide-rangeâ¯wavelength photons. Here, the main key challenges are reviewed, especially the charge carrier dynamics in perovskite-based 2-terminal (2-T) TSCs in terms of current matching, and how to manage these issues from a vantage point of characterization. To do this, the effect of recombination layers, optical and fabrication hurdles, and the impact of wide bandgap perovskite solar cells are discussed extensively. Afterward, this review focuses on various optoelectronics, spectroscopic, and theoretical (optical simulation) characterizations to figure out those issues, especially current-matching issues faced by the photovoltaic society. This review comprehensively provides deep insights into the relationship between the current-matching problems and the photovoltaic performance of TSCs through a variety of perspectives. Consequently, it is believed that this review is essential to address the main problems of 2-T TSCs, and the suggestions to elucidate the charge carrier dynamics and its characterization may pave the way to overcome such obstacles to further improve the development of 2-T TSCs in relation to the current-matching problems.
RESUMO
Nonfullerene acceptors (NFAs) have emerged as tremendous materials, efficiently advancing bulk-heterojunction organic solar cells (OSCs) technology. Unlike their fullerene counterparts, NFAs offer the unique advantage of finely tunable electronic energy levels and optical characteristics, which correspond to substantial enhancement in power conversion efficiency of OSCs. Herein, we have introduced a new series of near-infrared NFAs (AY1-AY8) to advance this technology further. Our research deeply investigates the structure-property relationship and thoroughly explores the optical, optoelectronics, photophysical, and photovoltaic characteristics of a synthetic reference molecule (R) and the modeled AY1-AY8 NFAs series. We performed advanced quantum chemical simulations using density functional theory (DFT) and time-dependent DFT methods. Additionally, we also estimated key geometric characteristics such as frontier molecular orbitals, hole-electron overlap, density of states, molecular electrostatic potential, molecular excitation and binding energies, transition density matrix, and reorganizational energy of electrons and holes and compared them with those of a synthetic reference molecule (R). Our findings show that all designed materials (AY1-AY8) exhibit red-shift absorption, improved electronic charge mobility, and low binding and excitation energies compared to R. Notably, these designed materials (AY1-AY8) display significantly narrower electronic energy gaps (E g 1.89-1.71 eV), indicating enhanced charge shifting from the highest occupied molecular orbital to lowest unoccupied molecular orbital and broadening of the absorption spectrum. Moreover, we also revealed a comprehensive study of the donor/acceptor complex of PTB7-Th/AY8 to understand charge shifting between donor and acceptor molecules. Therefore, we strongly recommend this designed (AY1-AY8) series to the experimentalists for the future development of highly efficient OSC devices.
RESUMO
A stable and efficient hole-transport material (HTM) is crucial for high-performance perovskite solar cells (PSCs). A 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-MeOTAD) being used widely to prepare highly efficient PSCs. However, Spiro-MeOTAD has some limitations due to its complex synthesis, which increases its cost, and it also requires dopants to improve its performance. Therefore, we designed thirteen unique small-molecule-based HTMs (MK1-MK13), which are easy to synthesize, highly cost-effective, and don't require dopants to prepare efficient PSCs. Their electrical and optical properties are then investigated theoretically using advanced quantum chemical approaches. The designed molecules showed lower energy gaps and improved optical and optoelectronic characteristics because of the improved phase inversion geometry. The detailed photo-physical and optoelectronic characteristics have been studied using density functional theory (DFT) and time-dependent (TD-DFT) calculations. Moreover, we investigated the impact of holes and electrons and the density of states, open-circuit voltage, frontier molecular orbital, transition density matrix, and other structural and photovoltaic characteristics of these materials. Among these, the MK3 molecule possesses the much narrower optical band gap of 1.04 eV and absorbance (λ max) of 684 nm, respectively. In addition, a profound investigation of the MK3/PC61BM blend shows excellent charge transfer at the acceptor-donor interface. Therefore, our proposed technique is necessary for generating appropriate photovoltaic materials for efficient optoelectronic devices and is helpful in further advancing the field.
RESUMO
Anthracene core-based hole-transporting material containing TIPs (triisopropylsilylacetylene) has been spotlighted as potential donors for perovskite solar cells (SCs) due to their appropriate energy levels, efficient hole transport capacity, high stability, and high power conversion efficiency. Herein, we have efficiently designed seven new highly conjugated A-B-D-C-D molecules (AS1-AS7) containing an anthracene core. We used end-capped modifications of donor units with acceptor units on one side and then theoretically characterized them for their appropriate use for SC applications. Modern quantum chemistry techniques have theoretically described the R (reference molecule) and developed (AS1-AS7) molecules. Moreover, the proposed (AS1-AS7) molecules are explored with density functional theory (DFT) and time-dependent density functional theory (TD-DFT) employing B3LYP/6-31G(d,p), and numerous parameters like photovoltaic, optical and electronic characteristics, frontier molecular orbital, excitation, binding and reorganization (λe and λh) energies, open circuit voltage, light harvesting efficiency, transition density matrix, fill factor, and the density of states have been studied. End-capped modification causes a smaller band gap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), higher UV-vis absorption maxima, tuned energy levels, lower binding and reorganizational (λe and λh) energies, and larger Voc values in proposed (AS1-AS7) molecules than R. AS5 has a remarkable absorption maximum of 495.94 nm and a narrow optimal energy gap (Eg) of 1.46 eV. Furthermore, a complex study of AS5:PC61BM has revealed extraordinary charge shifting at the HOMO (AS5)-LUMO (PC61BM) interface. Our results suggested that newly developed anthracene core-based compounds (AS1-AS7) would be effective candidates with excellent photovoltaic and optoelectronic properties and could be employed in future organic and perovskite SC applications.
RESUMO
A series of small pure Au m (2 ≥ m ≤ 7) and copper-doped Au m-x Cu x clusters was evaluated by density functional theory (DFT) at the CAM-B3LYP/LANL2DZ level for their geometric, electronic, and nonlinear optical (NLO) properties. The charge transfer for the Au cluster significantly improved by reducing the HOMO-LUMO energy gap from 3.67 eV to 0.91 eV after doping with Cu atoms. The doping of Cu also showed noteworthy impacts on other optical and NLO properties, including a decrease in the excitation energy and increase in the dipole moment and oscillator strength. Furthermore, changes in the linear isotropic and anisotropic polarizabilities (α iso and α aniso) and first and second NLO hyperpolarizabilities (ß static, γ static) were also observed in the pure and Cu-doped clusters, which enhanced the NLO response. The nonlinear optical properties of the clusters were evaluated by calculating the static and frequency dependent second- and third-order NLO polarizabilities at 1064 nm wavelength. Among all the doped structures, the Au3Cu1 cluster showed the largest static first hyperpolarizability of ß (total) = 4.73 × 103 au, while the Au1Cu6 cluster showed frequency dependent first hyperpolarizability of ß (-2w;w,w) = 1.26 × 106 au. Besides this, large static and frequency-dependent second hyperpolarizability values of 6.30 × 105 au and 1.05 × 10 au were exhibited by Cu7 and Au1Cu6, respectively. This study offers an effective approach to design high-performance NLO materials utilizing mixed metal clusters which might have broad applications in the fields of optoelectronics and electronics.
RESUMO
In the present work, five novel non-fullerene acceptor molecules are represented to explore the significance of organic solar cells (OSCs). The electro-optical properties of the designed A-D-A-type molecules rely on the central core donor moiety associated with different halogen families such as fluorine, chlorine, and bromine atoms and acyl, nitrile, and nitro groups as acceptor moieties. Among these, M1 exhibits the maximum absorption (λmax) at 728 nm in a chloroform solvent as M1 has nitro and nitrile groups in the terminal acceptor, which is responsible for the red shift in the absorption coefficient as compared to R (716 nm). M1 also shows the lowest value of the energy band gap (2.07 eV) with uniform binding energy in the range of 0.50 eV for all the molecules. The transition density matrix results reveal that easy dissociation of the exciton is possible in M1. The highest value of the dipole moment (4.6 D) indicates the significance of M4 and M2 in OSCs as it reduces the chance of charge recombination. The low value of λe is given by our designed molecules concerning reference molecules, indicating their enhanced electron mobility. Thus, these molecules can serve as the most economically efficient material. Hence, all newly designed non-fullerene acceptors provide an overview for further development in the performance of OSCs.
RESUMO
Recently, end-capped acceptors tailoring approach has attracted many researchers because of unceasing higher power conversion efficiencies (PCEs) of resulted compounds. By keeping in view, the crucial role of NFAs in bulk-heterojunction OSCs, herein, we molecularly engineered five new non-fullerene acceptor materials (Y6A1-Y6A5) by modifying a recently synthesized Y6 molecule (R), having 18% power conversion efficiency when combined with D18 donor polymer. The structural-elemental connection, physical-chemical, optoelectronic, and photovoltaic characteristics of novel deigned and reference material (R) are studied with advanced quantum-chemical modulations. Density functional theory and time dependent-density functional theory has been employed through various basis sets to investigate the designed molecules theoretically. Interestingly, all of the newly modeled materials displayed lower excitation energies with lower HOMO-LUMO energy-gaps in-contrast with R molecule. Moreover, a red-shifted absorption and lower reorganizational energies of electron and hole are also a novel feature of these designed materials. The lower binding energy values of modeled materials offers better charge separation and high photo-current density (Jsc) as compared to R. Transition density analysis, open circuit voltage, and molecular electrostatic potential analysis suggested that end-capped acceptors alteration of R molecule is an efficient approach for tuning the optoelectronic properties of non-fullerene-based acceptor molecules (Y6A1-Y6A5). In last, composite study of donor: acceptor (D18:Y6A2) complex has also been carried-out to realize the charge transfer process at the donor-acceptor interface. After all investigations, we hope that our theoretical modeled materials are superior than Y6 molecule, therefore, we endorse these materials for the synthesis to prepare highly-efficient BHJ-OSCs devices.
RESUMO
Nowadays, organic solar cells (OSCs) with non-fullerene electron acceptors provide the highest efficiencies among all studied OSCs. To further improve the efficiencies of fullerene-free organic solar cells, end-capped acceptor modification is made with strong electron withdrawing groups. In this report, we have theoretically designed five new novel Benzodithiophene core-based acceptor molecules (H1-H5) with the aim to study the possible enhancement in photophysical, optoelectronic, and photovoltaic properties of newly designed molecules. The end-capped acceptor modification of famous and recently synthesized FBDIC molecule has been made with strong electron withdrawing groups. Density functional theory and time-dependent-density functional theory are extensively used to study the structural-property relationship, optical properties and various geometrical parameters like frontier molecular orbitals alignment, excitation and binding energy, transition density matrix along with open circuit voltage, density of states and dipole moment. Commonly, low reorganization energies (hole and electron) afford high charge mobility and our all designed systems are enriched in aspect (λe = 0.0044-0.0104 eV and λh = 0.0060-0.0090 eV). Moreover, H1-H5 molecules demonstrate red-shifting in absorption spectrum (λmax = 741-812 nm) as compare to R (λmax = 728 nm). Low excitation and binding energies with low HOMO (highest occupied molecular orbital)-LUMO (lowest unoccupied molecular orbital) energy gap of H1-H5 suggested that designed molecules are better and suitable candidates for high performance organic solar cell. Results of all analysis indicate that this theoretical framework demonstrates that end-capped acceptors modification is a simple and effective alternative strategy to achieve the desirable optoelectronic properties. Therefore, H1-H5 are recommended to experimentalist for out-looking future developments of highly efficient solar cells.
RESUMO
Sequential all-dip-coating deposition of (CH3)3NPbI3-x Cl x perovskite materials was conducted in an aqueous nonhalide lead precursor solution, which was followed by that in a (CH3)3NI and (CH3)3NCl mixed solution as part of a facile, cost-effective, and environmentally benign manufacturing process for high-efficiency perovskite solar cells. The (CH3)3NPbI3-x Cl x perovskite layers deposited via the proposed process were constructed with a Cl/I ratio below â¼3%, indicating the partial insertion of Cl into the (CH3)3NPbI3 perovskite lattice. The amount of Cl inserted was readily modulated by varying the (CH3)3NCl concentration in the (CH3)3NI/(CH3)3NCl mixed solution. Incorporating a small amount of Cl led to significant improvements in the surface morphology and crystallinity of the perovskite layer as compared to (CH3)3NPbI3 fabricated under the same conditions. The perovskite solar cell devices with these (CH3)3NPbI3-x Cl x perovskite films exhibited superior device performances and stabilities, resulting in an outstanding power conversion efficiency of â¼15.3%. Results show that the fabrication of (CH3)3NPbI3-x Cl x perovskite material with an aqueous nonhalide lead precursor is more efficient than conventional spin-casting approach with detrimental organic solvents.