RESUMO
Two novel quaternary oxyarsenides, Eu8Zn2As6O and Eu14Zn5As12O, were synthesized through metal flux reactions, and their crystal structures were established by single-crystal X-ray diffraction methods. Eu8Zn2As6O crystallizes in the orthorhombic space group Pbca, featuring polyanionic ribbons composed of corner-shared triangular [ZnAs3] units, running along the [100] direction. The structure of Eu14Zn5As12O crystallizes in the monoclinic space group P2/m and its anionic substructure can be described as an infinite "ribbonlike" chain comprised of [ZnAs3] trigonal-planar units, although the structural complexity here is greater and also amplified by disorder on multiple crystallographic positions. In both structures, the O2- anion occupies an octahedral void with six neighboring Eu2+ cations. Formal electron counting, electronic structure calculations, and transport properties reveal the charge-balanced semiconducting nature of these heteroanionic Zintl phases. High-temperature thermoelectric transport properties measurements on Eu14Zn5As12O reveal relatively high resistivity (ρ500K = 8 Ω·cm) and Seebeck coefficient values (S500K = 220 µV K-1), along with a low concentration and mobility of holes as the dominant charge-carriers (n500K = 8.0 × 1017 cm-3, µ500K = 6.4 cm2/V s). Magnetic studies indicate the presence of divalent Eu2+ species in Eu14Zn5As12O and complex magnetic ordering, with two transitions observed at T1 = 21.6 K and T2 = 9 K.
RESUMO
A new quaternary telluride, Ba4Ge2Sb2Te10, was synthesized at high temperature via the reaction of elements. A single-crystal X-ray diffraction study shows that the title compound crystallizes in its own structure type in the monoclinic P21/c space group having cell dimensions of a = 13.984(3) Å, b = 13.472(3) Å, c = 13.569(3) Å, and ß = 90.16(3)° with four formula units per unit cell (Z = 4). The pseudo-one-dimensional crystal structure of Ba4Ge2Sb2Te10 consists of infinite 1∞[Ge2Sb2Te10]8- stripes, which are separated by Ba2+ cations. Each of the Ge(1) atoms is covalently bonded to four Te atoms, whereas the Ge(2) atom is covalently bonded with one Sb(2) and three Te atoms in a distorted tetrahedral geometry. The title compound is the first example of a chalcogenide that shows Ge-Sb bonding. The Sb(1) atom is present at the center of the seesaw geometry of four Te atoms. In contrast, the Sb(2) atom forms a seesaw geometry by coordinating with one Ge(2) and three Te atoms. Condensation of these Ge and Sb centered polyhedral units lead to the formation of 1∞[Ge2Sb2Te10]8- stripes. The temperature-dependent resistivity study suggests the semimetallic/degenerate semiconducting nature of polycrystalline Ba4Ge2Sb2Te10. The positive sign of Seebeck coefficient values indicates that the predominant charge carriers are holes in Ba4Ge2Sb2Te10. An extremely low lattice thermal conductivity of â¼0.34 W/mK at 773 K was observed for polycrystalline Ba4Ge2Sb2Te10, which is presumably due to the lattice anharmonicity induced by the stereochemically active 5s2 lone pair of Sb. The electronic structure of Ba4Ge2Sb2Te10 and the bonding of atom pairs in the structure have been analyzed by means of ELF analysis and crystal orbital Hamilton population (COHP) analysis.
RESUMO
Standard solid-state methods produced black crystals of the compounds BaCu0.43(3)Te2 and BaAg0.77(1)Te2 at 1173 K; the crystal structures of each were established using single-crystal X-ray diffraction data. Both crystal structures are modulated. The compound BaCu0.43(3)Te2 crystallizes in the monoclinic superspace group P2(αß1/2)0, having cell dimensions of a = 4.6406(5) Å, b = 4.6596(5) Å, c = 10.362(1) Å, ß = 90.000(9)°, and Z = 2 and an incommensurate vector of q = 0.3499(6)b* + 0.5c*. The compound BaAg0.77(1)Te2 crystallizes in the orthorhombic P21212(α00)000 superspace group with cell dimensions of a = 4.6734(1) Å, b = 4.6468(1) Å, c = 11.1376(3) Å, and Z = 2 and an incommensurate vector of q = 0.364(2)a*. The asymmetric unit of the BaCu0.43(3)Te2 structure comprises eight crystallographically independent sites; that for BaAg0.77(1)Te2 comprises four. In these two structures, each of the M (M = Cu, Ag) atoms is connected to four Te atoms to make two-dimensional layers of [MxTe4/4]n- that are separated by layers of Ba atoms and square nets of Te. A Raman spectroscopic study at 298(2) K on a pelletized polycrystalline sample of BaAg0.8Te2 shows the presence of Ag-Te (83, 116, and 139 cm-1) and Ba-Te vibrations (667 and 732 cm-1). A UV-vis-NIR spectroscopic study on a powdered sample of BaAg0.8Te2 shows the semiconducting nature of the compound with a direct band gap of 1.0(2) eV, consistent with its black color. DFT calculations give a pseudo bandgap with a weak value of the DOS at the Fermi level.
RESUMO
A new ternary telluride, Ba3ScTe5, with a pseudo-one-dimensional structure, was synthesized at 1173 K by standard solid-state methods. A single-crystal X-ray diffraction study at 100(2) K shows the structure to be modulated. The structure of the subcell of Ba3ScTe5 crystallizes with two formula units in the hexagonal space group D6h3-P63/mcm with unit cell dimensions of a = b = 10.1190(5) Å and c = 6.8336(3) Å. The asymmetric unit of the subcell structure consists of four crystallographically independent sites: Ba1 (site symmetry: m2m), Sc1 (-3.m), Te1 (m2m), and Te2 (3.2). Its structure is made up of chains of ∞1[ScTe33-] that are separated by Ba2+ cations. The Sc atoms are bonded to six Te1 atoms that form a slightly distorted octahedral geometry. The structure of the subcell also contains linear infinite chains of Te2 with intermediate Te···Te interactions. The superstructure of Ba3ScTe5 is incommensurate and was solved in the hexagonal superspace group P-6(00γ)0 with a = 10.1188(3) Å and c = 6.8332(3) Å and a modulation vector of q = 0.3718(2)c*. The arrangement and coordination geometries of the atoms in the superstructure are very similar to those in the substructure. However, the main difference is that the infinite chains of Te atoms in the superstructure are distorted owing to the formation of long- and short-bonded pairs of Te atoms. The presence of these chains with intermediate Te···Te interactions makes assignment of the formal oxidation states arbitrary. The optical absorption study of a polycrystalline sample of Ba3ScTe5 that was synthesized by the stoichiometric reaction of elements at 1173 K reveals a direct band gap of 1.1(2) eV. The temperature-dependent resistivity study of polycrystalline Ba3ScTe5 shows semiconducting behavior corroborating the optical studies, while density functional theory calculations report a pseudo band gap of 1.3 eV.
RESUMO
Single crystals and a polycrystalline sample of Ba2Ag2Se2(Se2) were synthesized by standard solid-state chemistry methods at 1173 and 973 K, respectively. The crystal structure of this ternary compound was established by single-crystal X-ray diffraction studies at 100(2) K. The superstructure of this compound is commensurate and crystallizes in the space group P21/ c of a monoclinic system with cell constants of a = 6.1766(2) Å, b = 6.1788(2) Å, c = 21.5784(8) Å, and ß = 90.02(1)° ( Z = 4). The asymmetric unit of the superstructure comprises eight atoms occupying general positions: two Ba atoms, two Ag atoms, and four Se atoms. In this structure, each Ag atom is tetrahedrally coordinated with four adjacent Se atoms to form distorted AgSe4 units that share edges with the neighboring tetrahedra to form a two-dimensional [AgSe4/4]- layer. These layers are separated by Ba2+ and Se22- units. The presence of the Se22- unit is also supported by an intense band at around 247 cm-1 in the Raman spectrum of Ba2Ag2Se2(Se2). A density functional theory study shows that the compound is a semiconductor with a calculated band gap of 1.1 eV. As determined by UV-visible spectroscopy, the direct and indirect band gaps are 1.23(2) and 1.10(2) eV, respectively, in good agreement with the theory and consistent with the black color of the compound. A temperature-dependent resistivity study also confirms the semiconducting nature of Ba2Ag2Se2(Se2).
RESUMO
Black single crystals of two novel ternary phosphide halides, Ba3P5Cl and Ba3P5Br, were grown using molten metal Pb-flux high-temperature reactions. These compounds were structurally characterized with the aid of the single-crystal X-ray diffraction (SCXRD) method at 100(2) K. The SCXRD shows that both compounds are isostructural and adopt a new structure type (space group R3Ìc, No. 167, Z = 6) with unit cell parameters a = 14.9481(16) Å, c = 7.3954(11) Å and a = 15.045(4) Å, c = 7.537(3) Å for Ba3P5Cl and Ba3P5Br, respectively. Cl- and Br- anions are octahedrally coordinated by Ba2+ cations, thus composing a face-sharing 1D infinite chain 1∞[XBa3]5+ running along the [001] direction. Moreover, the crystal structures feature peculiar one-dimensional disordered infinite helical chains of 1∞P-, composed of partially occupied phosphorous atoms, each being a superposition of three symmetrical copies of the ordered phosphorus chain, with continuity along the c-axis. Ba3P5X (X = Cl, Br) compounds are charge-balanced heteroanionic Zintl phases according to the charge-partitioning scheme (Ba2+)3[P-]5X-. The presumed semiconducting behavior of both compounds corroborates well with the results of the electronic structure calculations performed with the aid of the TB-LMTO-ASA code.
RESUMO
Three new isostructural quaternary tellurides, Ba2Ln1-xMn2Te5 (Ln = Pr, Gd, and Yb), have been synthesized by the molten-flux method at 1273 K. The single-crystal X-ray diffraction studies at 298(2) K showed that Ba2Ln1-xMn2Te5 crystallize in the space group -C2/m of the monoclinic crystal system. There are six unique crystallographic sites in this structure's asymmetric unit: one Ba site, one Ln site, one Mn site, and three Te sites. The Ln site in the Ba2Ln1-xMn2Te5 structure is partially filled, which leaves about one-third of the Ln sites vacant (â¡) for Pr and Gd compounds. These structures do not contain any homoatomic or metallic bonding and can be charge-balanced as (Ba2+)2(Gd/Pr3+)2/3(Mn2+)2(Te2-)5. The refined composition for the Yb compound is Ba2Yb0.74(1)Mn2Te5 and can be charge-balanced with a mixed valence state of Yb2+/Yb3+. The crystal structures of Ba2Ln1-xMn2Te5 consist of complex layers of [Ln1-xMn2Te5]4- stacked along the [100] direction, with Ba2+ cations separating these layers. The Ln atoms are bound to six Te atoms that form a distorted octahedral geometry around the central Ln atom. Each Mn atom in this structure is coordinated to four Te atoms in a distorted tetrahedral fashion. These LnTe6 and MnTe4 units are the main building blocks of the Ba2Ln1-xMn2Te5 structure. The optical absorption study performed on a polycrystalline Ba2Gd2/3Mn2Te5 sample reveals a direct bandgap of 1.06(2) eV consistent with the DFT study. A semiconducting behavior was also observed for polycrystalline Ba2Gd2/3Mn2Te5 from the resistivity study. The temperature-dependent magnetic studies on a polycrystalline sample of Ba2Gd2/3Mn2Te5 did not reveal any long-range magnetic order down to 5 K. The effective magnetic moment (µeff) of 10.37µB calculated using the Curie-Weiss law is in good agreement with the theoretical value (µcal) of 10.58µB.