RESUMO
Organic light emitting devices, in particular, properties of polymer light-emitting transistors with printed electrodes and bilayer printed devices with in-plane emission have been investigated and discussed. The semitransparent device based on poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) with Ag-nanowire source/drain and transparent carbon nanotube gate electrodes exhibits ambipolar and light-emitting characteristics. For the devices with oriented poly(9,9-dioctylfluorene) (F8) films, enhanced electron and hole field-effect mobilities have been achieved by aligning the polymer chains parallel to the transport direction. The bilayer device using F8BT lower layer and oriented F8 upper layer with the channel direction parallel to the polymer orientation exhibits improved EL intensity and higher external quantum efficiency than that with the channel direction perpendicular to the polymer chains orientation. The optical pulses of more than 100 Hz frequency are generated by directly modulating a bilayer device with an in-plane emission pattern.
RESUMO
We describe a flexible capacitance-type sensor that can detect an approaching human without contact, fabricated by developing and applying duplex conductive-ink printing to a film substrate. The results of our calculations show that the difference in size between the top and bottom electrodes of the sensor allows for the spatial extension of the electric field distribution over the electrodes. Hence, such a component functions as a proximity sensor. This thin and light device with a large form factor can be arranged at various places, including curved surfaces and the back of objects such that it is unnoticeable. In our experiment, we attached it to the back of a bed, and found that our device successfully detected the breathing of a subject on the bed without contacting his body. This should contribute to reducing the physical and psychological discomfort among patients during medical checks, or when their condition is being monitored.