Wafer-Scale Atomic Assembly for 2D Multinary Transition Metal Dichalcogenides for Visible and NIR Photodetection.

The tunable properties of 2D transition-metal dichalcogenide (TMDs) materials are extensively investigated for high-performance and wavelength-tunable optoelectronic applications. However, the precise modification of large-scale systems for practical optoelectronic applications remains a challenge. In this study, a wafer-scale atomic assembly process to produce 2D multinary (binary, ternary, and quaternary) TMDs for broadband photodetection is demonstrated. The large-area growth of homogeneous MoS2, Ni0.06Mo0.26S0.68, and Ni0.1Mo0.9S1.79Se0.21 is carried out using a succinct coating of the single-source precursor and subsequent thermal decomposition combined with thermal evaporation of the chalcogen powder. The optoelectrical properties of the multinary TMDs are dependent on the combination of heteroatoms. The maximum photoresponsivity of the MoS2-, Ni0.06Mo0.26S0.68-, and Ni0.1Mo0.9S1.79Se0.21-based photodetectors is 3.51 × 10-4, 1.48, and 0.9 A W-1 for 532 nm and 0.063, 0.42, and 1.4 A W-1 for 1064 nm, respectively. The devices exhibited excellent photoelectrical properties, which is highly beneficial for visible and near-infrared (NIR) photodetection.

Dual Catalytic and Self-Assembled Growth of Two-Dimensional Transition Metal Dichalcogenides Through Simultaneous Predeposition Process.

The recent introduction of alkali metal halide catalysts for chemical vapor deposition (CVD) of transition metal dichalcogenides (TMDs) has enabled remarkable two-dimensional (2D) growth. However, the process development and growth mechanism require further exploration to enhance the effects of salts and understand the principles. Herein, simultaneous predeposition of a metal source (MoO3 ) and salt (NaCl) by thermal evaporation is adopted. As a result, remarkable growth behaviors such as promoted 2D growth, easy patterning, and potential diversity of target materials can be achieved. Step-by-step spectroscopy combined with morphological analyses reveals a reaction path for MoS2 growth in which NaCl reacts separately with S and MoO3 to form Na2 SO4 and Na2 Mo2 O7 intermediates, respectively. These intermediates provide a favorable environment for 2D growth, including an enhanced source supply and liquid medium. Consequently, large grains of monolayer MoS2 are formed by self-assembly, indicating the merging of small equilateral triangular grains on the liquid intermediates. This study is expected to serve as an ideal reference for understanding the principles of salt catalysis and evolution of CVD in the preparation of 2D TMDs.

Dynamic multimodal holograms of conjugated organogels via dithering mask lithography.

Polymeric materials have been used to realize optical systems that, through periodic variations of their structural or optical properties, interact with light-generating holographic signals. Complex holographic systems can also be dynamically controlled through exposure to external stimuli, yet they usually contain only a single type of holographic mode. Here, we report a conjugated organogel that reversibly displays three modes of holograms in a single architecture. Using dithering mask lithography, we realized two-dimensional patterns with varying cross-linking densities on a conjugated polydiacetylene. In protic solvents, the organogel contracts anisotropically to develop optical and structural heterogeneities along the third dimension, displaying holograms in the form of three-dimensional full parallax signals, both in fluorescence and bright-field microscopy imaging. In aprotic solvents, these heterogeneities diminish as organogels expand, recovering the two-dimensional periodicity to display a third hologram mode based on iridescent structural colours. Our study presents a next-generation hologram manufacturing method for multilevel encryption technologies.

Strategic Customization of Polymeric Nanocomposites Modified by 2D Titanium Oxide Nanosheet for High-k and Flexible Gate Dielectrics.

Organic polymer-based dielectrics with intrinsic mechanical flexibility and good processability are excellent candidates for the dielectric layer of flexible electronics. These polymer films can become even more rigid and electrically robust when modified through cross-linking processes. Moreover, the composites formed by dispersing nanoscale inorganic fillers in a polymer matrix can exhibit further improved polarization property. However, these strategies can be challenging as homogeneous dispersion of nanomaterials in the matrix is difficult to achieve; thus, degradation of electrically insulating properties of nanocomposite layers is often observed. Here, a high-k, pinhole-free, and flexible poly(vinyl alcohol) (PVA)-based nanocomposite dielectric is presented, incorporating 2D TiO2 nanosheets (NSs) for the first time. Despite the attractive dielectric constant, exceptional flexibility, and electrically insulating property of PVA-TiO2 nanocomposites, only few studies on these materials have been reported. The organic/inorganic nanosheet hybrid layer, which reaches an unprecedentedly high dielectric constant of 43.8 (more than four times higher than that of cross-linked PVA), also exhibits an outstanding leakage current density as low as 10-9 A cm-2 . Furthermore, the repeated bending tests for nanocomposite capacitors reveal their capability of operating without any deterioration of their performances even after 1000 iterations of bending cycles at a bending radius of 3 mm.

Photostimulated Pyrothermoelectric Coupling in Two-Dimensional Tin Monoselenide Enabling Zero-Biased Multimodal Transducers.

Despite the advancement of the Internet of Things (IoT) and portable devices, the development of zero-biased sensing systems for the dual detection of light and gases remains a challenge. As an emerging technology, direct energy conversion driven by intriguing physical properties of two-dimensional (2D) materials can be realized in nanodevices or a zero-biased integrated system. In this study, we unprecedentedly attempted to exploit the photostimulated pyrothermoelectric coupling of two-dimensional SnSe for use in zero-biased multimodal transducers for the dual detection of light and gases. We synthesized homogeneous, large-area 6 in SnSe multilayers via a rational synthetic route based on the thermal decomposition of a solution-processed single-source precursor. Zero-biased SnSe transducers for the dual monitoring of light and gases were realized by exploiting the synergistic coupling of the photostimulated pyroelectric and thermoelectric effects of SnSe. The extracted photoresponsivity at 532 nm and NO2 gas responsivity of the SnSe-based transducers corresponded to 1.07 × 10-6 A/W and 13263.6% at 0 V, respectively. To bring universal applicability of the zero-biased SnSe transducers, the wide operation bandwidth photoelectrical properties (visible to NIR) and dynamic current responses toward two NO2/NH3 gases were systematically evaluated.

Artificial Q-Grader: Machine Learning-Enabled Intelligent Olfactory and Gustatory Sensing System.

Portable and personalized artificial intelligence (AI)-driven sensors mimicking human olfactory and gustatory systems have immense potential for the large-scale deployment and autonomous monitoring systems of Internet of Things (IoT) devices. In this study, an artificial Q-grader comprising surface-engineered zinc oxide (ZnO) thin films is developed as the artificial nose, tongue, and AI-based statistical data analysis as the artificial brain for identifying both aroma and flavor chemicals in coffee beans. A poly(vinylidene fluoride-co-hexafluoropropylene)/ZnO thin film transistor (TFT)-based liquid sensor is the artificial tongue, and an Au, Ag, or Pd nanoparticles/ZnO nanohybrid gas sensor is the artificial nose. In order to classify the flavor of coffee beans (acetic acid (sourness), ethyl butyrate and 2-furanmethanol (sweetness), caffeine (bitterness)) and the origin of coffee beans (Papua New Guinea, Brazil, Ethiopia, and Colombia-decaffeine), rational combination of TFT transfer and dynamic response curves capture the liquids and gases-dependent electrical transport behavior and principal component analysis (PCA)-assisted machine learning (ML) is implemented. A PCA-assisted ML model distinguished the four target flavors with >92% prediction accuracy. ML-based regression model predicts the flavor chemical concentrations with >99% accuracy. Also, the classification model successfully distinguished four different types of coffee-bean with 100% accuracy.

Wafer-Scale Production of Two-Dimensional Tin Monoselenide: Expandable Synthetic Platform for van der Waals Semiconductor-Based Broadband Photodetectors.

A synthetic platform for industrially applicable two-dimensional (2D) semiconductors that addresses the paramount issues associated with large-scale production, wide-range photosensitive materials, and oxidative stability has not yet been developed. In this study, we attained the 6 in. scale production of 2D SnSe semiconductors with spatial homogeneity using a rational synthetic platform based on the thermal decomposition of solution-processed single-source precursors. The long-range structural and chemical homogeneities of the 2D SnSe layers are manifested using comprehensive spectroscopic analyses. Furthermore, the capability of the SnSe-based photodetectors for broadband photodetection is distinctly verified. The photoresponsivity and detectivity of the SnSe-based photodetectors are 5.89 A W-1 and 1.8 × 1011 Jones at 532 nm, 1.2 A W-1 and 3.7 × 1010 Jones at 1064 nm, and 0.14 A W-1 and 4.3 × 109 Jones at 1550 nm, respectively. The minimum rise times for the 532 and 1064 nm lasers are 62 and 374 µs, respectively. The photoelectrical analysis of the 5 × 5 SnSe-based photodetector array reveals 100% active devices with 95.06% photocurrent uniformity. We unequivocally validated that the air and thermal stabilities of the photocurrent yielded from the SnSe-based photodetector are determined to be >30 d in air and 160 °C, respectively, which are suitable for optoelectronic applications.

One-Dimensional π-d Conjugated Coordination Polymer Intercalated MXene Compound for High-Performance Supercapacitor Electrode.

MXenes possess the characteristics required for high-performance supercapacitors, such as high metallic conductivity and electrochemical activity, but their full potential remains unrealized owing to their tendency to self-restack when fabricated into an electrode. Designing an MXene interlayer with an effective intercalant has, therefore, become an important criterion to alleviate the restacking issue while also synergistically interact with MXene to further improve its electrochemical activity. This study reports the intercalation of 1D π-d conjugated coordination polymer (Ni-BTA) within the Ti3 C2 Tx nanosheet for the fabrication of a highly efficient supercapacitor electrode. Ni-BTA, which consists of a nickel center and 1,2,4,5-benzenetetramine (BTA) organic chain, is uniformly intercalated by direct synthesis on the abundant oxygen terminals on the Ti3 C2 Tx nanosheet surface. The intercalated Ni-BTA acts as an effective charge carrier transportation pathway through its 1D stretched delocalized π-d electrons while participating in pseudocapacitive activity with the Ni centers. As a result, the Ni-BTA/MXene film exhibits excellent rate performance and a gravimetric specific capacitance of 264.4 F g-1 at 5 mV s-1 . This magnitude is retained up to 94.6% after 10 000 cycles. The present study provides insights into the design of MXene interlayers for the fabrication of highly robust and stable supercapacitors.

Spectro-Microscopic Perceptions into Oxidation Behavior of Large-Scale Molybdenum Disulfide and its Photoelectrical Correlation.

Despite the encouraging properties and research of 2D MoS2 , an ongoing issue associated with the oxidative instability remains elusive for practical optoelectronic applications. Thus, in-depth understanding of the oxidation behavior of large-scale and homogeneous 2D MoS2 is imperative. Here the structural and chemical transformations of large-area MoS2 multilayers by air-annealing with altered temperature and time via combinatorial spectro-microscopic analyses (Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy) are surveyed. The results gave indications pertaining to temperature- and time-dependent oxidation effects: i) heat-driven elimination of redundant residues, ii) internal strain stimulated by the formation of MoO bonds, iii) deterioration of the MoS2 crystallinity, iv) layer thinning, and v) morphological transformation from 2D MoS2 layers to particles. Photoelectrical characterization of the air-annealed MoS2 is implemented to capture the link between the oxidation behavior of MoS2 multilayers and their photoelectrical properties. The photocurrent based on MoS2 air-annealed at 200 °C is assessed to be 4.92 µA, which is 1.73 times higher than that of pristine MoS2 (2.84 µA). The diminution in the photocurrent of the photodetector based on MoS2 air-annealed above 300 °C in terms of the structural, chemical, and electrical conversions induced by the oxidation process is further discussed.

Chemical Patterning of Graphene via Metal-Assisted Highly Energetic Electron Irradiation for Graphene Homojunction-Based Gas Sensors.

To gain the target functionality of graphene for gas detection, nonfocused and large-scale compatible MeV electron beam irradiation on graphene with Ag patterns is innovatively adopted in air for chemical patterning of graphene. This strategy allows the metal-assisted site-specific oxidation of graphene to realize monolithically integrated graphene-chemically patterned graphene (CPG)-graphene homojunction-based gas sensors. The size-tunable CPG patterns can be mediated by regulating the size of Ag prepatterns. The impacts of highly energetic electron irradiation (HEEI) on graphene are summarized as follows: (i) the selective p-type doping and the defect generation of graphene by the HEEI-induced oxidation, (ii) the resistance of the homojunction devices manipulated by the HEEI dose, (iii) the band gap opening of graphene as well as the lowering of the Fermi level, (iv) the work function values for pristine graphene and CPG corresponding to 4.14 and 4.88 eV, respectively, and (v) graphene-CPG-graphene homojunction for NO2 gas, revealing an 839% enhanced gas response compared with that of the pristine graphene-based gas sensor.

Complementary Dual-Channel Gas Sensor Devices Based on a Role-Allocated ZnO/Graphene Hybrid Heterostructure.

Here, we present a new approach to dual-channel gas sensors on the basis of a role-allocated graphene/ZnO heterostructure, formed by the complementary hybridization of graphene and a ZnO thin film. The method enables cyclic and reproducible gas response as well as high gas response. The role allocation of graphene and ZnO was verified by studying the electrical transport properties of the heterostructure. The results indicated that the ZnO top layer and graphene bottom layer act as a gas adsorption layer and a carrier conducting layer, respectively. The charge interactions of the heterostructures were systematically explored by monitoring changes in transfer characteristics at room temperature and elevated temperature ( T = 250 °C) after introducing 20 ppm NO2. These results can be understood in terms of the dual-channel effect of the graphene/ZnO heterostructures. Remarkably, an abrupt and reliable gas response under periodic NO2 gas injection was unambiguously achieved by the heterostructure-based gas sensors and as ∼30 times higher than those of a graphene-based gas sensor. These proposed heterostructures represent a fundamental building block of a complementary hybrid gas sensor with highly sensitive and reproducible gas response.

Enhancing 2D growth of organic semiconductor thin films with macroporous structures via a small-molecule heterointerface.

The physical structure of an organic solid is strongly affected by the surface of the underlying substrate. Controlling this interface is an important issue to improve device performance in the organic electronics community. Here we report an approach that utilizes an organic heterointerface to improve the crystallinity and control the morphology of an organic thin film. Pentacene is used as an active layer above, and m-bis(triphenylsilyl)benzene is used as the bottom layer. Sequential evaporations of these materials result in extraordinary morphology with far fewer grain boundaries and myriad nanometre-sized pores. These peculiar structures are formed by difference in molecular interactions between the organic layers and the substrate surface. The pentacene film exhibits high mobility up to 6.3 cm(2) V(-1) s(-1), and the pore-rich structure improves the sensitivity of organic-transistor-based chemical sensors. Our approach opens a new way for the fabrication of nanostructured semiconducting layers towards high-performance organic electronics.

Fluorinated benzothiadiazole (BT) groups as a powerful unit for high-performance electron-transporting polymers.

Over the past few years, one of the most remarkable advances in the field of polymer solar cells (PSCs) has been the development of fluorinated 2,1,3-benzothiadiazole (BT)-based polymers that lack the solid working principles of previous designs, but boost the power conversion efficiency. To assess a rich data set for the influence of the fluorinated BT units on the charge-transport characteristics in organic field-effect transistors (OFETs), we synthesized two new polymers (PDPP-FBT and PDPP-2FBT) incorporating diketopyrrolopyrrole (DPP) and either single- or double-fluorinated BT and thoroughly investigated them via a range of techniques. Unlike the small differences in the absorption properties of PDPP-FBT and its nonfluorinated analogue (PDPP-BT), the introduction of doubly fluorinated BT into the polymer backbone induces a noticeable change in its optical profiles and energy levels, which results in a slightly wider bandgap and deeper HOMO for PDPP-2FBT, relative to the others. Grazing incidence X-ray diffraction (GIXD) analysis reveals that both fluorinated polymer films have long-range orders along the out-of-plane direction, and π-π stacking in the in-plane direction, implying semicrystalline lamellar structures with edge-on orientations in the solid state. Thanks to the strong intermolecular interactions and highly electron-deficient π-systems driven by the inclusion of F atoms, the polymers exhibit electron mobilities of up to 0.42 and 0.30 cm2 V(-1) s(-1) for PDPP-FBT and PDPP-2FBT, respectively, while maintaining hole mobilities higher than 0.1 cm2 V(-1) s(-1). Our results highlight that the use of fluorinated BT blocks in the polymers is a promising molecular design strategy for improving electron transporting performance without sacrificing their original hole mobility values.