RESUMO
BACKGROUND: In recent years, severe electromagnetic interference among electronic devices has been caused by the unprecedented growth of communication systems. Therefore, microwave absorbing materials are required to relieve these problems by absorbing the unwanted microwave. In the design of microwave absorbers, magnetic nanomaterials have to be used as fine particles dispersed in an insulating matrix. Besides the intrinsic properties of these materials, the structure and morphology are also crucial to the microwave absorption performance of the composite. In this study, Ni-Co-MWCNT composites were synthesized, and the changes in electric permittivity, magnetic permeability, and reflectance loss of the samples were evaluated at frequencies of 2 to 18 GHz. METHODS: Nickel-Cobalt-Multi Wall Carbon Nanotubes (MWCNT) composites were successfully synthesized by the co-precipitation chemical method. The structural, morphological, and magnetic properties of the samples were characterized and investigated by X-ray diffractometer (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Vibrating Sample Magnetometer (VSM), and Vector Network Analyzer (VNA). RESULTS: The results revealed that the Ni-Co-MWCNT composite has the highest electromagnetic wave absorption rate with a reflectance loss of -70.22 dB at a frequency of 10.12 GHz with a thickness of 1.8 mm. The adequate absorption bandwidth (RL <-10 dB) was 6.9 GHz at the high-frequency region, exhibiting excellent microwave absorbing properties as a good microwave absorber. CONCLUSION: Based on this study, it can be argued that the Ni-Co-MWCNT composite can be a good candidate for making light absorbers of radar waves at frequencies 2- 18 GHz.
RESUMO
In this report we present a novel photoacoustic (PA) modality using pulsed chirp excitation at a fixed wavelength and spectral analysis based on frequency-domain (FD) processing. We introduce Truncated Correlation Photoacoustic Coherence Tomography (TC-PACT), a PA axial resolution enhancement methodology, with an application to closely stacked subsurface multilayers of plexiglass coated with a thin layer of graphite acting as surface absorber. The experimental results demonstrated that the SNR and the axial resolution were higher in TC-PACT than in conventional FD photoacoustics. A ns pulsed laser was also used as PA excitation source with axial resolution results found to be commensurate with TC-PACT. However, the separation distance between adjacent absorbers when the latter approached the axial resolution limit of the transducer was only resolved in TC-PACT compared to pulsed laser PA owing to the lower uncertainty in the former modality involved in determining the location of the absorbers.