Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207 Pb NMR.

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D perovskite solar cells. The properties of mixed-halide compositions depend on the local halide distribution, which is challenging to study at the level of single octahedra. In particular, it has been suggested that there is a preference for occupation of the distinct axial and equatorial halide sites in mixed-halide 2D perovskites. 207 Pb NMR can be used to probe the atomic-scale structure of lead-halide materials, but although the isotropic 207 Pb shift is sensitive to halide stoichiometry, it cannot distinguish configurational isomers. Here, we use 2D isotropic-anisotropic correlation 207 Pb NMR and relativistic DFT calculations to distinguish the [PbX6 ] configurations in mixed iodide-bromide 3D FAPb(Br1-x Ix )3 perovskites and 2D BA2 Pb(Br1-x Ix )4 perovskites based on formamidinium (FA+ ) and butylammonium (BA+ ), respectively. We find that iodide preferentially occupies the axial site in BA-based 2D perovskites, which may explain the suppressed halide mobility.

The Effect of α-Branched Side Chains on the Structural and Opto-Electronic Properties of Poly(Diketopyrrolopyrrole-alt-Terthiophene).

Introducing solubilizing α-branched alkyl chains on a poly(diketopyrrolopyrrole-alt-terthiophene) results in a dramatic change of the structural, optical, and electronic properties compared to the isomeric polymer carrying ß-branched alkyl side chains. When branched at the α-position the alkyl substituent creates a steric hindrance that reduces the tendency of the polymer to π-π stack and endows the material with a much higher solubility in common organic solvents. The wider π-π stacking and reduced tendency to crystallize, evidenced from grazing-incidence wide-angle X-ray scattering, result in a wider optical band gap in the solid state. In solar cells with a fullerene acceptor, the α-branched isomer affords a higher open-circuit voltage, but an overall lower power conversion efficiency as a result of a too well-mixed nanomorphology. Due its reduced π-π stacking, the α-branched isomer fluoresces and affords near-infrared light-emitting diodes emitting at 820 nm.

A Self-Assembled Small-Molecule-Based Hole-Transporting Material for Inverted Perovskite Solar Cells.

Hybrid organic-inorganic perovskite solar cells have recently emerged as one of the most promising low-cost photovoltaic technologies. The remarkable progress of perovskite photovoltaics is closely related to advances in interfacial engineering and development of charge selective interlayers. Herein, we present the synthesis and characterization of a fused azapolyheteroaromatic small molecule, namely anthradi-7-azaindole (ADAI), with outstanding performance as a hole-transporting layer in perovskite solar cells with inverted architecture. Its molecular arrangement, induced by hydrogen-bond-directed self-assembly, favors a suitable morphology of the perovskite layer, reducing the effects of recombination as revealed by light intensity dependence, photoluminescence, and electroluminescence studies.

Controlling the Microstructure of Conjugated Polymers in High-Mobility Monolayer Transistors via the Dissolution Temperature.

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (Tdis ) is investigated as a powerful strategy for morphology control. Low Tdis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π-π stacking. The field-effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high Tdis with a value approaching 1 cm2 V-1 s-1 . Besides that, the solution kinetics reveal a higher growth rate of aggregates at low Tdis , and filtration experiments further confirm that the dependence of the fibril width in monolayers on Tdis is consistent with the aggregate size in solution. The generalizability of the Tdis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high-mobility monolayer transistors.

Adjusting Aggregation Modes and Photophysical and Photovoltaic Properties of Diketopyrrolopyrrole-Based Small Molecules by Introducing B←N Bonds.

The packing mode of small-molecular semiconductors in thin films is an important factor that controls the performance of their optoelectronic devices. Designing and changing the packing mode by molecular engineering is challenging. Three structurally related diketopyrrolopyrrole (DPP)-based compounds were synthesized to study the effect of replacing C-C bonds by isoelectronic dipolar B←N bonds. By replacing one of the bridging C-C bonds on the peripheral fluorene units of the DPP molecules by a coordinative B←N bond and changing the B←N bond orientation, the optical absorption, fluorescence, and excited-state lifetime of the compounds can be tuned. The substitution alters the preferential aggregation of the molecules in the solid state from H-type (for C-C) to J-type (for B←N). Introducing B←N bonds thus provides a subtle way of controlling the packing mode. The photovoltaic properties of the compounds were evaluated in bulk heterojunctions with a fullerene acceptor and showed moderate performance as a consequence of suboptimal morphologies, bimolecular recombination, and triplet-state formation.

Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability.

All-polymer solar cells (all-PSCs) composed of conjugated polymers as both donor and acceptor components in bulk heterojunction photoactive layers have attracted increasing attention. However, it is a big challenge to achieve optimal morphology in polymer:polymer blends. In response, we report herein a new strategy to adjust the nanoscale organization for all-PSCs. Specifically, side chain engineering of the well-known naphthalene diimide (NDI)-based polymer N2200 is modulated by introducing a fraction of linear oligoethylene oxide (OE) side chains to replace branched alkyl chains on the NDI units and by synthesizing a series of NDI-based polymer acceptors NOE x, where x is the percentage of OE chain substituted NDI units relative to total NDI units. Compared to the reference polymer NOE0, OE-chain-containing polymer NOE10 offers a much higher power conversion efficiency (PCE) of 8.1% with a record high fill factor (FF) of 0.75 in all-PSCs. Moreover, the NOE10-based all-PSC exhibits excellent long-term and thermal stabilities with >97% of the initial PCE being maintained after 300 h of aging at 65 °C. This work demonstrates an effective morphology optimization strategy to achieve highly efficient and stable all-PSCs and shows the excellent potential of NOE10 as an alternative to commercially available acceptor polymers N2200.

Subnaphthalocyanines as Electron Acceptors in Polymer Solar Cells: Improving Device Performance by Modifying Peripheral and Axial Substituents.

A new class of subnaphthalocyanines bearing various peripheral and axial substituents have been synthesized for use as electron acceptors in solution-processed bulk-heterojunction polymer solar cells. The resulting solar cells exhibit modest photovoltaic performance with contributions from both the polymer donor and subnaphthalocyanine acceptor to the photocurrent.

New n-Type Solution Processable All Conjugated Polymer Network: Synthesis, Optoelectronic Characterization, and Application in Organic Solar Cells.

The efficient synthesis of a new solution-processable n-type conjugated polymer network (PNT1) is reported through palladium-catalyzed Stille cross-coupling reaction conditions following the A3 + B2 synthetic approach. A benzo[1,2-b:3,4-b':5,6-b″]trithiophene derivative is used as the A3 knot and an alkyl functionalized naphthalenediimide is utilized as the B2 linker. The thermal, optical, and electrochemical properties are examined in detail, showing high thermal stability, absorbance in the visible part of the solar spectrum, and reversible reduction characteristics similar to those of the fullerene derivative [6,6]-phenyl-C71 -butyric acid methyl ester (PC71 BM). PNT1 is employed as the electron acceptor in solution-processed bulk heterojunction organic solar cells, demonstrating the potential of this new type of materials for optoelectronic applications.

Materials interface engineering for solution-processed photovoltaics.

Advances in solar photovoltaics are urgently needed to increase the performance and reduce the cost of harvesting solar power. Solution-processed photovoltaics are cost-effective to manufacture and offer the potential for physical flexibility. Rapid progress in their development has increased their solar-power conversion efficiencies. The nanometre (electron) and micrometre (photon) scale interfaces between the crystalline domains that make up solution-processed solar cells are crucial for efficient charge transport. These interfaces include large surface area junctions between photoelectron donors and acceptors, the intralayer grain boundaries within the absorber, and the interfaces between photoactive layers and the top and bottom contacts. Controlling the collection and minimizing the trapping of charge carriers at these boundaries is crucial to efficiency.

"Double-Cable" Conjugated Polymers with Linear Backbone toward High Quantum Efficiencies in Single-Component Polymer Solar Cells.

A series of "double-cable" conjugated polymers were developed for application in efficient single-component polymer solar cells, in which high quantum efficiencies could be achieved due to the optimized nanophase separation between donor and acceptor parts. The new double-cable polymers contain electron-donating poly(benzodithiophene) (BDT) as linear conjugated backbone for hole transport and pendant electron-deficient perylene bisimide (PBI) units for electron transport, connected via a dodecyl linker. Sulfur and fluorine substituents were introduced to tune the energy levels and crystallinity of the conjugated polymers. The double-cable polymers adopt a "face-on" orientation in which the conjugated BDT backbone and the pendant PBI units have a preferential π-π stacking direction perpendicular to the substrate, favorable for interchain charge transport normal to the plane. The linear conjugated backbone acts as a scaffold for the crystallization of the PBI groups, to provide a double-cable nanophase separation of donor and acceptor phases. The optimized nanophase separation enables efficient exciton dissociation as well as charge transport as evidenced from the high-up to 80%-internal quantum efficiency for photon-to-electron conversion. In single-component organic solar cells, the double-cable polymers provide power conversion efficiency up to 4.18%. This is one of the highest performances in single-component organic solar cells. The nanophase-separated design can likely be used to achieve high-performance single-component organic solar cells.

Diketopyrrolopyrrole Polymers for Organic Solar Cells.

Conjugated polymers have been extensively studied for application in organic solar cells. In designing new polymers, particular attention has been given to tuning the absorption spectrum, molecular energy levels, crystallinity, and charge carrier mobility to enhance performance. As a result, the power conversion efficiencies (PCEs) of solar cells based on conjugated polymers as electron donor and fullerene derivatives as electron acceptor have exceeded 10% in single-junction and 11% in multijunction devices. Despite these efforts, it is notoriously difficult to establish thorough structure-property relationships that will be required to further optimize existing high-performance polymers to their intrinsic limits. In this Account, we highlight progress on the development and our understanding of diketopyrrolopyrrole (DPP) based conjugated polymers for polymer solar cells. The DPP moiety is strongly electron withdrawing and its polar nature enhances the tendency of DPP-based polymers to crystallize. As a result, DPP-based conjugated polymers often exhibit an advantageously broad and tunable optical absorption, up to 1000 nm, and high mobilities for holes and electrons, which can result in high photocurrents and good fill factors in solar cells. Here we focus on the structural modifications applied to DPP polymers and rationalize and explain the relationships between chemical structure and organic photovoltaic performance. The DPP polymers can be tuned via their aromatic substituents, their alkyl side chains, and the nature of the π-conjugated segment linking the units along the polymer chain. We show that these building blocks work together in determining the molecular conformation, the optical properties, the charge carrier mobility, and the solubility of the polymer. We identify the latter as a decisive parameter for DPP-based organic solar cells because it regulates the diameter of the semicrystalline DPP polymer fibers that form in the photovoltaic blends with fullerenes via solution processing. The width of these fibers and the photon energy loss, defined as the energy difference between optical band gap and open-circuit voltage, together govern to a large extent the quantum efficiency for charge generation in these blends and thereby the power conversion efficiency of the photovoltaic devices. Lowering the photon energy loss and maintaining a high quantum yield for charge generation is identified as a major pathway to enhance the performance of organic solar cells. This can be achieved by controlling the structural purity of the materials and further control over morphology formation. We hope that this Account contributes to improved design strategies of DPP polymers that are required to realize new breakthroughs in organic solar cell performance in the future.

The Role of the Axial Substituent in Subphthalocyanine Acceptors for Bulk-Heterojunction Solar Cells.

Four hexachlorosubphthalocyanines SubPcCl6 -X bearing different axial substituents (X) have been synthesized for use as novel electron acceptors in solution-processed bulk-heterojunction organic solar cells. Subphthalocyanines are aromatic chromophoric molecules with cone-shaped structure, good solution processability, intense optical absorption in the visible spectral region, appropriate electron mobilities, and tunable energy levels. Solar cells with subphthalocyanines as the electron acceptor and PTB7-Th as the electron donor exhibit a power conversion efficiency up to 4 % and an external quantum efficiency approaching 60 % due to significant contributions from both the electron donor and the electron acceptor to the photocurrent, indicating a promising prospect of non-fullerene acceptors based on subphthalocyanines and structurally related systems.

Toward Practical Useful Polymers for Highly Efficient Solar Cells via a Random Copolymer Approach.

Using benzo[1,2-b:4,5-b']dithiophene and two matched 5,6-difluorobenzo[2,1,3]thiadiazole-based monomers, we demonstrate that random copolymerization of two electron deficient monomers, alternating with one electron rich monomer, forms a successful approach to synthesize state-of-the-art semiconducting copolymers for organic solar cells. Over a range of compositions, these random copolymers provide impressive power conversion efficiencies (PCEs) of about 8.0%, higher than those of their binary parent polymers, and with little batch-to-batch variation. A PCE over 8% could also be achieved when the active layer was deposited from nonhalogenated solvents at room temperature.

Dichotomous Role of Exciting the Donor or the Acceptor on Charge Generation in Organic Solar Cells.

In organic solar cells, photoexcitation of the donor or acceptor phase can result in different efficiencies for charge generation. We investigate this difference for four different 2-pyridyl diketopyrrolopyrrole (DPP) polymer-fullerene solar cells. By comparing the external quantum efficiency spectra of the polymer solar cells fabricated with either [60]PCBM or [70]PCBM fullerene derivatives as acceptor, the efficiency of charge generation via donor excitation and acceptor excitation can both be quantified. Surprisingly, we find that to make charge transfer efficient, the offset in energy between the HOMO levels of donor and acceptor that govern charge transfer after excitation of the acceptor must be larger by ∼0.3 eV than the offset between the corresponding two LUMO levels when the donor is excited. As a consequence, the driving force required for efficient charge generation is significantly higher for excitation of the acceptor than for excitation of the donor. By comparing charge generation for a total of 16 different DPP polymers, we confirm that the minimal driving force, expressed as the photon energy loss, differs by about 0.3 eV for exciting the donor and exciting the acceptor. Marcus theory may explain the dichotomous role of exciting the donor or the acceptor on charge generation in these solar cells.

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Growing interests have been devoted to the design of polymer acceptors as potential replacement for fullerene derivatives for high-performance all polymer solar cells (all-PSCs). One key factor that is limiting the efficiency of all-PSCs is the low fill factor (FF) (normally <0.65), which is strongly correlated with the mobility and film morphology of polymer:polymer blends. In this work, we find a facile method to modulate the crystallinity of the well-known naphthalene diimide (NDI) based polymer N2200, by replacing a certain amount of bithiophene (2T) units in the N2200 backbone by single thiophene (T) units and synthesizing a series of random polymers PNDI-Tx, where x is the percentage of the single T. The acceptor PNDI-T10 is properly miscible with the low band gap donor polymer PTB7-Th, and the nanostructured blend promotes efficient exciton dissociation and charge transport. Solvent annealing (SA) enables higher hole and electron mobilities, and further suppresses the bimolecular recombination. As expected, the PTB7-Th:PNDI-T10 solar cells attain a high PCE of 7.6%, which is a 2-fold increase compared to that of PTB7-Th:N2200 solar cells. The FF of 0.71 reaches the highest value among all-PSCs to date. Our work demonstrates a rational design for fine-tuned crystallinity of polymer acceptors, and reveals the high potential of all-PSCs through structure and morphology engineering of semicrystalline polymer:polymer blends.

Electro-optical Properties of Neutral and Radical Ion Thienosquaraines.

Thienosquaraines are an interesting class of electroactive dyes that are useful for applications in organic electronics. Herein, the redox chemistry and electrochromic response of a few newly synthesized thienosquaraines are presented. These properties are compared to those of the commercial 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl]squaraine. The stability of the radical ions formed in electrochemical processes strongly affects these properties, as shown by cyclic voltammetry, in situ spectroelectrochemistry, and quantum chemical calculations. Furthermore, all of the dyes show aggregation tendency resulting in panchromatic absorption covering the whole UV/Vis spectral range.

High quantum efficiencies in polymer solar cells at energy losses below 0.6 eV.

Diketopyrrolopyrrole-based conjugated polymers bridged with thiazole units and different donors have been designed for polymer solar cells. Quantum efficiencies above 50% have been achieved with energy loss between optical band gap and open-circuit voltage below 0.6 eV.

Polymer Solar Cells: Solubility Controls Fiber Network Formation.

The photoactive layer of polymer solar cells is commonly processed from a four-component solution, containing a semiconducting polymer and a fullerene derivative dissolved in a solvent-cosolvent mixture. The nanoscale dimensions of the polymer-fullerene morphology that is formed upon drying determines the solar cell performance, but the fundamental processes that govern the size of the phase-separated polymer and fullerene domains are poorly understood. Here, we investigate morphology formation of an alternating copolymer of diketopyrrolopyrrole and a thiophene-phenyl-thiophene oligomer (PDPPTPT) with relatively long 2-decyltetradecyl (DT) side chains blended with [6,6]-phenyl-C71-butyric acid methyl ester. During solvent evaporation the polymer crystallizes into a fibrous network. The typical width of these fibers is analyzed by quantification of transmission electron microscopic images, and is mainly determined by the solubility of the polymer in the cosolvent and the molecular weight of the polymer. A higher molecular weight corresponds to a lower solubility and film processing results in a smaller fiber width. Surprisingly, the fiber width is not related to the drying rate or the amount of cosolvent. We have made solar cells with fiber widths ranging from 28 to 68 nm and found an inverse relation between fiber width and photocurrent. Finally, by mixing two cosolvents, we develop a ternary solvent system to tune the fiber width. We propose a model based on nucleation-and-growth which can explain these measurements. Our results show that the width of the semicrystalline polymer fibers is not the result of a frozen dynamical state, but determined by the nucleation induced by the polymer solubility.

Deep absorbing porphyrin small molecule for high-performance organic solar cells with very low energy losses.

We designed and synthesized the DPPEZnP-TEH molecule, with a porphyrin ring linked to two diketopyrrolopyrrole units by ethynylene bridges. The resulting material exhibits a very low energy band gap of 1.37 eV and a broad light absorption to 907 nm. An open-circuit voltage of 0.78 V was obtained in bulk heterojunction (BHJ) organic solar cells, showing a low energy loss of only 0.59 eV, which is the first report that small molecule solar cells show energy losses <0.6 eV. The optimized solar cells show remarkable external quantum efficiency, short circuit current, and power conversion efficiency up to 65%, 16.76 mA/cm(2), and 8.08%, respectively, which are the best values for BHJ solar cells with very low energy losses. Additionally, the morphology of DPPEZnP-TEH neat and blend films with PC61BM was studied thoroughly by grazing incidence X-ray diffraction, resonant soft X-ray scattering, and transmission electron microscopy under different fabrication conditions.

Small-bandgap semiconducting polymers with high near-infrared photoresponse.

Lowering the optical bandgap of conjugated polymers while maintaining a high efficiency for photoinduced charge transfer to suitable electron acceptors such as fullerene has remained a formidable challenge in the area of organic photovoltaics. Here we present the synthesis and application of a series of ultra-small-bandgap donor-acceptor polymers composed of diketopyrrolopyrrole as acceptor and pyrrole-based groups as strong donors. The HOMO energy levels of the polymers can be progressively increased by increasing the donor strength while the LUMO level remains similar, resulting in optical bandgaps between 1.34 and 1.13 eV. Solar cells based on these polymers blended with fullerene derivatives show a high photoresponse in the near-infrared (NIR) and good photovoltaic characteristics, with power conversion efficiencies of 2.9-5.3%. The photoresponse reaches up to 50% external quantum efficiency at 1000 nm and extends to 1200 nm. With the use of a retro-reflective foil to optimize light absorption, high photocurrents up to 23.0 mA cm(-2) are achieved under standard solar illumination conditions. These ultra-small-bandgap polymers are excellent candidates for use in multi-junction applications and NIR organic photodetectors.