Thermal Stability of Amorphous Solid Dispersions.

Amorphous solid dispersion drug delivery systems (ASD DDS) were proved to be efficient for the enhancement of solubility and bioavailability of poorly water-soluble drugs. One of the major keys for successful preparation of ASD is the selection of appropriate excipients, mostly polymers, which have a crucial role in improving drug solubility and its physical stability. Even though, excipients should be chemically inert, there is some evidence that polymers can affect the thermal stability of active pharmaceutical ingredients (API). The thermal stability of a drug is closely related to the shelf-life of pharmaceutical products and therefore it is a matter of high pharmaceutical relevance. An overview of thermal stability of amorphous solids is provided in this paper. Evaluation of thermal stability of amorphous solid dispersion is perceived from the physicochemical perspective, from a kinetic (motions) and thermodynamic (energy) point of view, focusing on activation energy and fragility, as well all other relevant parameters for ASD design, with a glance on computational kinetic analysis of solid-state decomposition.

Investigation of factors influencing radioiodine (131I) biokinetics in patients with benign thyroid disease using nonlinear mixed effects approach.

PURPOSE: Radioiodine (131I) therapy is the common treatment option for benign thyroid diseases. The objective of this study was to characterize 131I biokinetics in patients with benign thyroid disease and to investigate and quantify the influence of patients' demographic and clinical characteristics on intra-thyroidal 131I kinetics by developing a population model. METHODS: Population pharmacokinetic analysis was performed using a nonlinear mixed effects approach. Data sets of 345 adult patients with benign thyroid disease, retrospectively collected from patients' medical records, were evaluated in the analysis. The two-compartment model of 131I biokinetics representing the blood compartment and thyroid gland was used as the structural model. RESULTS: Results of the study indicate that the rate constant of the uptake of 131I into the thyroid (ktu) is significantly influenced by clinical diagnosis, age, functional thyroid volume, free thyroxine in plasma (fT4), use of anti-thyroid drugs, and time of discontinuation of therapy before administration of the radioiodine (THDT), while the effective half-life of 131I is affected by the age of the patients. Inclusion of the covariates in the base model resulted in a decrease of the between subject variability for ktu from 91 (3.9) to 53.9 (4.5)%. CONCLUSIONS: This is the first population model that accounts for the influence of fT4 and THDT on radioiodine kinetics. The model could be used for further investigations into the correlation between thyroidal exposure to 131I and the outcome of radioiodine therapy of benign thyroid disease as well as the development of dosing recommendations.

Carbapenem-Resistant Acinetobacter baumannii: Biofilm-Associated Genes, Biofilm-Eradication Potential of Disinfectants, and Biofilm-Inhibitory Effects of Selenium Nanoparticles.

This study aimed to investigate the biofilm-production ability of carbapenem-resistant Acinetobacter baumannii (CRAB), the biofilm-eradication potential of 70% ethanol and 0.5% sodium hypochlorite, the effects of selenium nanoparticles (SeNPs) against planktonic and biofilm-embedded CRAB, and the relationship between biofilm production and bacterial genotypes. A total of 111 CRAB isolates were tested for antimicrobial susceptibility, biofilm formation, presence of the genes encoding carbapenemases, and biofilm-associated virulence factors. The antibiofilm effects of disinfectants and SeNPs against CRAB isolates were also tested. The vast majority of the tested isolates were biofilm producers (91.9%). The bap, ompA, and csuE genes were found in 57%, 70%, and 76% of the CRAB isolates, with the csuE being significantly more common among biofilm producers (78.6%) compared to non-biofilm-producing CRAB (25%). The tested disinfectants showed a better antibiofilm effect on moderate and strong biofilm producers than on weak producers (p < 0.01). The SeNPs showed an inhibitory effect against all tested planktonic (MIC range: 0.00015 to >1.25 mg/mL) and biofilm-embedded CRAB, with a minimum biofilm inhibitory concentration of less than 0.15 mg/mL for 90% of biofilm producers. In conclusion, SeNPs might be used as promising therapeutic and medical device coating agents, thus serving as an alternative approach for the prevention of biofilm-related infections.

Population exposure-response model of 131I in patients with benign thyroid disease.

PURPOSE: The study aimed to explore the relationship of different exposure measures with 131I therapy response in patients with benign thyroid disease, estimate the variability in the response, investigate possible covariates, and discuss dosing implications of the results. METHODS: A population exposure-response analysis was performed using nonlinear mixed-effects modelling. Data from 95 adult patients with benign thyroid disease were analysed. Evaluated exposure parameters were: administered radioactivity dose (Aa) [MBq], total absorbed dose (ABD) [Gy], maximum of absorbed dose-rate (MXR) [Gy/h] and biologically effective dose (BED) [Gy]. The response was modelled as ordered categorical data: hyper-, eu- and hypothyroidism. The final model performance was evaluated by a visual predictive check. RESULTS: The probability of the outcome following 131I therapy was best described by a proportional-odds model, including the log-linear model of 131I effect and the exponential model of the response-time relationship. All exposure measures were statistically significant with p<0.001, with BED and ABD being statistically better than the other two. Nevertheless, as BED resulted in the lowest AIC value, it was included in the final model. Accordingly, BED value of 289.7 Gy is associated with 80% probability of successful treatment outcome 12 months after 131I application in patients with median thyroid volume (32.28 mL). The target thyroid volume was a statistically significant covariate. The visual predictive check of the final model showed good model performance. CONCLUSION: Our results imply that BED formalism could aid in therapy individualisation. The larger thyroid volume is associated with a lower probability of a successful outcome.

Voltammetric Determination of Lead and Copper in Wine by Modified Glassy Carbon Electrode.

This paper describes the determination of Pb and Cu with a Nafion-modified glassy carbon electrode and MnCo2O4 nanoparticles as working electrode for anodic stripping voltammetry. Pb and Cu were accumulated in HCl/KCl (0.1 mol dm-3) at a potential of -1.4 V (vs. Ag/AgCl electrode) for 480 s, followed by a linear sweep anodic stripping voltammetry (ASV) scan from -1.0 to +0.5 V. Under optimum conditions, the calibration curves were linear in the range of 0.01 - 8 and 0.01 - 5 mg dm-3 for Pb and Cu, respectively. Effect of sample dilution, accumulation time and potential were optimized. A study of interfering substances was performed. A significant increase in current was obtained at the modified electrode in comparison with the bare glassy carbon electrode. The modified electrode was successfully applied for determination of Pb and Cu in wine samples after a simple preparation procedure. Pb and Cu content in wine was used for estimation of the target hazard quotient (THQ) values for minimal and maximal levels of the metals.

Thermo-Analytical and Compatibility Study with Mechanistic Explanation of Degradation Kinetics of Ambroxol Hydrochloride Tablets under Non-Isothermal Conditions.

Ambroxol hydrochloride (AMB), used as a broncho secretolytic and an expectorant drug, is a semi-synthetic derivative of vasicine obtained from the Indian shrub Adhatoda vasica. It is a metabolic product of bromhexine. The paper provides comprehensive and detailed research on ambroxol hydrochloride, gives information on thermal stability, the mechanism of AMB degradation, and data of practical interest for optimization of formulation that contains AMB as an active compound. Investigation on pure AMB and in commercial formulation Flavamed® tablet (FT), which contains AMB as an active compound, was performed systematically using thermal and spectroscopic methods, along with a sophisticated and practical statistical approach. AMB proved to be a heat-stable and humidity-sensitive drug. For its successful formulation, special attention should be addressed to excipients since it was found that polyvinyl pyrrolidone and Mg stearate affect the thermal stability of AMB. At the same time, lactose monohydrate contributes to faster degradation of AMB and change in decomposition mechanism. It was found that the n-th order kinetic model mechanistically best describes the decomposition process of pure AMB and in Flavamed® tablets.

Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II).

The porous spinel oxide nanoparticles, MnCo2O4, were synthesized by citrate gel combustion technique. Morphology, crystallinity and Co/Mn content of modified electrode was characterized and determined by Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction pattern analysis (XRD), simultaneous thermogravimetry and differential thermal analysis (TG/DTA). Nanoparticles were used for modification of glassy carbon electrode (GCE) and new sensor was applied for simultaneous determination of Pb(II) and Cd(II) ions in water samples with the linear sweep anodic stripping voltammetry (LSASV).The factors such as pH, deposition potential and deposition time are optimized. Under optimal conditions the wide linear concentration range from 0.05 to 40 µmol/dm3was obtained for Pb(II), with limit of detection (LOD) of 8.06 nmol/dm3 and two linear concentration ranges were obtained for Cd(II), from 0.05 to 1.6 µmol/dm3 and from 1.6 to 40 µmol/dm3, with calculated LOD of 7.02 nmol/dm3. The selectivity of the new sensor was investigated in the presence of interfering ions. The sensor is stable and it gave reproducible results. The new sensor was succesfully applied on determination of heavy metals in natural waters.