Increased Mobility and Reduced Hysteresis of MoS2 Field-Effect Transistors via Direct Surface Precipitation of CsPbBr3-Nanoclusters for Charge Transfer Doping.

Transition-metal dichalcogenides (TMDs) and metal halide perovskites (MHPs) have been investigated for various applications, owing to their unique physical properties and excellent optoelectronic functionalities. TMD monolayers synthesized via chemical vapor deposition (CVD), which are advantageous for large-area synthesis, exhibit low mobility and prominent hysteresis in the electrical signals of field-effect transistors (FETs) because of their native defects. In this study, we demonstrate an increase in electrical mobility by ∼170 times and reduced hysteresis in the current-bias curves of MoS2 FETs hybridized with CsPbBr3 for charge transfer doping, which is implemented via solution-based CsPbBr3-nanocluster precipitation on CVD-grown MoS2 monolayer FETs. Electrons injected from CsPbBr3 into MoS2 induce heavy n-doping and heal point defects in the MoS2 channel layer, thus significantly increasing mobility and reducing hysteresis in the hybrid FETs. Our results provide a foundation for improving the reliability and performance of TMD-based FETs by hybridizing them with solution-based perovskites.

Suppressed Thermal Quenching via Tetrafluoroborate-Induced Surface Reconstruction of CsPbBr3 Nanocrystals for Efficient Perovskite Light-Emitting Diodes.

Although metal-halide perovskite nanocrystals (NCs) have garnered significant attention for optoelectronic applications, the presence of electrically insulating organic ligands in CsPbBr3 NCs hinders efficient charge injection and transportation in light-emitting diodes (LEDs). A common approach to address this issue involves ligand exchange with shorter ligands and precise control of the surface ligand density through additional purification steps. Nevertheless, the practical application of these methods has been hindered by their poor structural integrity and high surface-defect density, which remain a challenge. Our investigation reveals that NOBF4 treatment effectively replaces native ligands with BF4- anions, in which BF4- anions are readily coordinated with the positively charged CsPbBr3 surface metal centers, thereby improving the photoluminescence quantum yield (PLQY) and thermal stability. In particular, the presence of BF4- anions coordinated at CsPbBr3 surfaces efficiently suppresses the pathway of excitons toward thermally activated nonradiative recombination, leading to minimal thermal quenching and superior device performance in green-emitting PeLEDs. Notably, PeLEDs based on CsPbBr3 NCs with the reconstructed surface via NOBF4 treatment exhibit an improved current efficiency of 31.12 cd/A and an external quantum efficiency of 11.24%, increased by 2.8 times compared to that of the pristine sample, indicating the enhanced hole-electron injection and transport into the CsPbBr3 NCs. Therefore, our results highlight the potential of NOBF4 as a versatile reagent for the ligand exchange and surface passivation of CsPbBr3 NCs, thereby offering promising prospects for the development of stable, high-performance PeLEDs.

Enhanced Responsivity and Photostability of Cs3Bi2I9-Based Self-Powered Photodetector via Chemical Vapor Deposition Engineering.

Lead-based halide perovskites have gained significant prominence in recent years in optoelectronics and photovoltaics, owing to their exceptional optoelectronic properties. Nonetheless, the toxicity of lead (Pb) and the stability concern pose obstacles to their potential for future large-scale market development. Herein, stable lead-free Cs3Bi2I9 (CBI) films are presented with smooth and compact morphologies synthesized via chemical vapor deposition (CVD), demonstrating their application as an UV photodetector in a self-powered way. The self-powered photodetectors (SPDs) exhibit remarkable characteristics, including a responsivity of 1.57 A W-1 and an impressive specific detectivity of 3.38 × 1013 Jones under the illumination of 365 nm at zero bias. Furthermore, the SPDs exhibit a nominal decline (≈2.2%) in the photocurrent under constant illumination over 500 h, highlighting its impressive long-term operational stability. Finally, the real-time UV-detection capability of the device is demonstrated by measuring the photocurrent under various conditions, including room light and sunlight at different times. These findings offer a new platform for synthesizing stable and high-quality perovskite films, and SPDs for advancing the development of wearable and portable electronics.

Suppressed Mn2+ doping in organometal halide perovskite nanocrystals by formation of two-dimensional (CH3NH3)2MnCl4.

The additional (CH3NH3)2MnCl4 phase was observed upon increasing the Mn2+ dopant concentration, preventing the formation of Mn2+-doped CH3NH3PbCl3 NCs. We introduce an approach to avoid the formation of an impurity phase by switching the sequence for the addition of MnCl2 in the crystal growth process.

Mechanistic Insight into Surface Defect Control in Perovskite Nanocrystals: Ligands Terminate the Valence Transition from Pb2+ to Metallic Pb0.

Organolead halide perovskite nanocrystals (NCs) have emerged as promising materials for various optoelectronic applications. However, their practical applications have been limited due to low structural integrity and poor luminescence stability associated with fast attachment-detachment dynamics of surface capping molecules during postprocessing. At present, a framework for understanding how the functional additives interact with surface moieties of organolead halide perovskites is not available. Methylammonium lead bromide NCs without surfactants on their surface provide an ideal system to investigate the direct interactions of the perovskite with functional molecules. When the oleic acid is used in a combination with n-octylamine, its contribution to surface passivation is significantly increased by protonating the alkyl amine to the corresponding ammonium ion. Our results demonstrate that the Br vacancies at the nonpassivated surface result in a reduction of Pb2+ to Pb0 by trapping electrons generated from the exciton dissociation, which provides a main pathway for exciton trapping.