Serial adaptive laboratory evolution enhances mixed carbon metabolic capacity of Escherichia coli.

Microbes have inherent capacities for utilizing various carbon sources, however they often exhibit sub-par fitness due to low metabolic efficiency. To test whether a bacterial strain can optimally utilize multiple carbon sources, Escherichia coli was serially evolved in L-lactate and glycerol. This yielded two end-point strains that evolved first in L-lactate then in glycerol, and vice versa. The end-point strains displayed a universal growth advantage on single and a mixture of adaptive carbon sources, enabled by a concerted action of carbon source-specialists and generalist mutants. The combination of just four variants of glpK, ppsA, ydcI, and rph-pyrE, accounted for more than 80% of end-point strain fitness. In addition, machine learning analysis revealed a coordinated activity of transcriptional regulators imparting condition-specific regulation of gene expression. The effectiveness of the serial adaptive laboratory evolution (ALE) scheme in bioproduction applications was assessed under single and mixed-carbon culture conditions, in which serial ALE strain exhibited superior productivity of acetoin compared to ancestral strains. Together, systems-level analysis elucidated the molecular basis of serial evolution, which hold potential utility in bioproduction applications.

Design of fully synthetic signal peptide library and its use for enhanced secretory production of recombinant proteins in Corynebacterium glutamicum.

BACKGROUND: Corynebacterium glutamicum is an attractive host for secretory production of recombinant proteins, including high-value industrial enzymes and therapeutic proteins. The choice of an appropriate signaling peptide is crucial for efficient protein secretion. However, due to the limited availability of signal peptides in C. glutamicum, establishing an optimal secretion system is challenging. RESULT: We constructed a signal peptide library for the isolation of target-specific signal peptides and developed a highly efficient secretory production system in C. glutamicum. Based on the sequence information of the signal peptides of the general secretion-dependent pathway in C. glutamicum, a synthetic signal peptide library was designed, and validated with three protein models. First, we examined endoxylanase (XynA) and one potential signal peptide (C1) was successfully isolated by library screening on xylan-containing agar plates. With this C1 signal peptide, secretory production of XynA as high as 3.2 g/L could be achieved with high purity (> 80%). Next, the signal peptide for ⍺-amylase (AmyA) was screened on a starch-containing agar plate. The production titer of the isolated signal peptide (HS06) reached 1.48 g/L which was 2-fold higher than that of the well-known Cg1514 signal peptide. Finally, we isolated the signal peptide for the M18 single-chain variable fragment (scFv). As an enzyme-independent screening tool, we developed a fluorescence-dependent screening tool using Fluorescence-Activating and Absorption-Shifting Tag (FAST) fusion, and successfully isolated the optimal signal peptide (18F11) for M18 scFv. With 18F11, secretory production as high as 228 mg/L was achieved, which was 3.4-fold higher than previous results. CONCLUSIONS: By screening a fully synthetic signal peptide library, we achieved improved production of target proteins compared to previous results using well-known signal peptides. Our synthetic library provides a useful resource for the development of an optimal secretion system for various recombinant proteins in C. glutamicum, and we believe this bacterium to be a more promising workhorse for the bioindustry.

High production of enantiopure (R,R)-2,3-butanediol from crude glycerol by Klebsiella pneumoniae with an engineered oxidative pathway and a two-stage agitation strategy.

BACKGROUND: (R,R)-2,3-butanediol (BDO) is employed in a variety of applications and is gaining prominence due to its unique physicochemical features. The use of glycerol as a carbon source for 2,3-BDO production in Klebsiella pneumoniae has been limited, since 1,3-propanediol (PDO) is generated during glycerol fermentation. RESULTS: In this study, the inactivation of the budC gene in K. pneumoniae increased the production rate of (R,R)-2,3-BDO from 21.92 ± 2.10 to 92.05 ± 1.20%. The major isomer form of K. pneumoniae (meso-2,3-BDO) was shifted to (R,R)-2,3-BDO. The purity of (R,R)-2,3-BDO was examined by agitation speed, and 98.54% of (R,R)-2,3-BDO was obtained at 500 rpm. However, as the cultivation period got longer, the purity of (R,R)-2,3-BDO declined. For this problem, a two-step agitation speed control strategy (adjusted from 500 to 400 rpm after 24 h) and over-expression of the dhaD gene involved in (R,R)-2,3-BDO biosynthesis were used. Nevertheless, the purity of (R,R)-2,3-BDO still gradually decreased over time. Finally, when pure glycerol was replaced with crude glycerol, the titer of 89.47 g/L of (R,R)-2,3-BDO (1.69 g/L of meso-2,3-BDO), productivity of 1.24 g/L/h, and yield of 0.35 g/g consumed crude glycerol was achieved while maintaining a purity of 98% or higher. CONCLUSIONS: This study is meaningful in that it demonstrated the highest production and productivity among studies in that produced (R,R)-2,3-BDO with a high purity in Klebsiella sp. strains. In addition, to the best of our knowledge, this is the first study to produce (R,R)-2,3-BDO using glycerol as the sole carbon source.

Systematic metabolic engineering of Escherichia coli for the enhanced production of cinnamaldehyde.

Cinnamaldehyde (CAD) derived from cinnamon bark has received much attention for its potential as a nematicide and food additive. Previously, we have succeeded in developing an Escherichia coli strain (YHP05) capable of synthesizing cinnamaldehyde; however, the production titer (75 mg/L) was not sufficient for commercialization. Herein, to develop an economical and sustainable production bioprocess, we further engineered the YHP05 strain for non-auxotrophic, antibiotic-free, inducer-free hyperproduction of CAD using systematic metabolic engineering. First, the conversion of trans-cinnamic acid (t-CA) to CAD was improved by the co-expression of carboxylic acid reductase and phosphopantetheinyl transferase (PPTase) genes. Second, to prevent the spontaneous conversion of CAD to cinnamyl alcohol, 10 endogenous reductase and dehydrogenase genes were deleted. Third, all expression cassettes were integrated into the chromosomal DNA using an auto-inducible system for antibiotic- and inducer-free production. Subsequently, to facilitate CAD production, available pools of cofactors (NADPH, CoA, and ATP) were increased, and acetate pathways were deleted. With the final antibiotic-, plasmid-, and inducer-free strain (H-11MPmR), fed-batch cultivations combined with in situ product recovery (ISPR) were performed, and the production titer of CAD as high as 3.8 g/L could be achieved with 49.1 mg/L/h productivity, which is the highest CAD titer ever reported.

Rapid combinatorial rewiring of metabolic networks for enhanced poly(3-hydroxybutyrate) production in Corynebacterium glutamicum.

BACKGROUND: The disposal of plastic waste is a major environmental challenge. With recent advances in microbial genetic and metabolic engineering technologies, microbial polyhydroxyalkanoates (PHAs) are being used as next-generation biomaterials to replace petroleum-based synthetic plastics in a sustainable future. However, the relatively high production cost of bioprocesses hinders the production and application of microbial PHAs on an industrial scale. RESULTS: Here, we describe a rapid strategy to rewire metabolic networks in an industrial microorganism, Corynebacterium glutamicum, for the enhanced production of poly(3-hydroxybutyrate) (PHB). A three-gene PHB biosynthetic pathway in Rasltonia eutropha was refactored for high-level gene expression. A fluorescence-based quantification assay for cellular PHB content using BODIPY was devised for the rapid fluorescence-activated cell sorting (FACS)-based screening of a large combinatorial metabolic network library constructed in C. glutamicum. Rewiring metabolic networks across the central carbon metabolism enabled highly efficient production of PHB up to 29% of dry cell weight with the highest cellular PHB productivity ever reported in C. glutamicum using a sole carbon source. CONCLUSIONS: We successfully constructed a heterologous PHB biosynthetic pathway and rapidly optimized metabolic networks across central metabolism in C. glutamicum for enhanced production of PHB using glucose or fructose as a sole carbon source in minimal media. We expect that this FACS-based metabolic rewiring framework will accelerate strain engineering processes for the production of diverse biochemicals and biopolymers.

Engineering of Leuconostoc citreum for Efficient Bioconversion of Soy Isoflavone Glycosides to Their Aglycone Forms.

Soy isoflavones are phytochemicals that possess various beneficial physiological properties such as anti-aging, anti-tumor, and antioxidant properties. Since soy isoflavones exist in glycoside forms, their bioavailability requires initial hydrolysis of the sugar moieties bound to them to be efficiently absorbed through the gut epithelium. Instead of conventional chemical hydrolysis using acids or organic solvents, alternative strategies for enhancing the bioavailability of soy isoflavones using biological methods are gaining attention. Here, we engineered Leuconostoc citreum isolated from Korean kimchi for efficient bioconversion of soy isoflavone glycosides into their aglycone forms to enhance their bioavailability. We first constructed an expression module based on the isoflavone hydrolase (IH)-encoding gene of Bifidobacterium lactis, which mediates conversion of isoflavone glycosides to aglycone forms. Using a high copy number plasmid and bicistronic expression design, the IH was successfully synthesized in L. citreum. Additionally, we determined enzymatic activity of the IH using an in vivo ß-glucosidase assay and confirmed its highly efficient bioconversion efficiency for various types of isoflavone glycosides. Finally, we successfully demonstrated that the engineered L. citreum could convert isoflavone glycosides present in fermented soymilk into aglycones.

Production of trans-cinnamic acid by whole-cell bioconversion from L-phenylalanine in engineered Corynebacterium glutamicum.

BACKGROUND: trans-cinnamic acid (t-CA) is a phenylpropanoid with a broad spectrum of biological activities including antioxidant and antibacterial activities, and it also has high potential in food and cosmetic applications. Although significant progress has been made in the production of t-CA using microorganisms, its relatively low product titers still need to be improved. In this study, we engineered Corynebacterium glutamicum as a whole-cell catalyst for the bioconversion of L-phenylalanine (L-Phe) into t-CA and developed a repeated bioconversion process. RESULTS: An expression module based on a phenylalanine ammonia lyase-encoding gene from Streptomyces maritimus (SmPAL), which mediates the conversion of L-Phe into t-CA, was constructed in C. glutamicum. Using the strong promoter PH36 and ribosome binding site (RBS) (in front of gene 10 of the T7 phage), and a high-copy number plasmid, SmPAL could be expressed to levels as high as 39.1% of the total proteins in C. glutamicum. Next, to improve t-CA production at an industrial scale, reaction conditions including temperature and pH were optimized; t-CA production reached up to 6.7 mM/h in a bioreactor under optimal conditions (50 °C and pH 8.5, using NaOH as base solution). Finally, a recycling system was developed by coupling membrane filtration with the bioreactor, and the engineered C. glutamicum successfully produced 13.7 mM of t-CA (24.3 g) from 18.2 mM of L-Phe (36 g) and thus with a yield of 75% (0.75 mol/mol) through repetitive supplementation. CONCLUSIONS: We developed a highly efficient bioconversion process using C. glutamicum as a biocatalyst and a micromembrane-based cell recycling system. To the best of our knowledge, this is the first report on t-CA production in C. glutamicum, and this robust platform will contribute to the development of an industrially relevant platform for the production of t-CA using microorganisms.

Development of CRISPR Interference (CRISPRi) Platform for Metabolic Engineering of Leuconostoc citreum and Its Application for Engineering Riboflavin Biosynthesis.

Leuconostoccitreum, a hetero-fermentative type of lactic acid bacteria, is a crucial probiotic candidate because of its ability to promote human health. However, inefficient gene manipulation tools limit its utilization in bioindustries. We report, for the first time, the development of a CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) interference (CRISPRi) system for engineering L. citreum. For reliable expression, the expression system of synthetic single guide RNA (sgRNA) and the deactivated Cas9 of Streptococcus pyogenes (SpdCas9) were constructed in a bicistronic design (BCD) platform using a high-copy-number plasmid. The expression of SpdCas9 and sgRNA was optimized by examining the combination of two synthetic promoters and Shine-Dalgarno sequences; the strong expression of sgRNA and the weak expression of SpdCas9 exhibited the most significant downregulation (20-fold decrease) of the target gene (sfGFP), without cell growth retardation caused by SpdCas9 overexpression. The feasibility of the optimized CRISPRi system was demonstrated by modulating the biosynthesis of riboflavin. Using the CRISPRi system, the expression of ribF and folE genes was downregulated (3.3-fold and 5.6-fold decreases, respectively), thereby improving riboflavin production. In addition, the co-expression of the rib operon was introduced and the production of riboflavin was further increased up to 1.7 mg/L, which was 1.53 times higher than that of the wild-type strain.

Enhanced production of styrene by engineered Escherichia coli and in situ product recovery (ISPR) with an organic solvent.

BACKGROUND: Styrene is a large-volume commodity petrochemical, which has been used in a wide range of polymer industry as the main building block for the construction of various functional polymers. Despite many efforts to produce styrene in microbial hosts, the production titers are still low and are not enough to meet the commercial production of styrene. RESULTS: Previously, we developed a high L-phenylalanine producer (E. coli YHP05), and it was used as a main host for de novo synthesis of styrene. First, we introduced the co-expression system of phenylalanine-ammonia lyase (PAL) and ferulic acid decarboxylase (FDC) genes for the synthesis of styrene from L-phenylalanine. Then, to minimize cell toxicity and enhance the recovery of styrene, in situ product recovery (ISPR) with n-dodecane was employed, and culture medium with supplementation of complex sources was also optimized. As a result, 1.7 ± 0.1 g/L of styrene was produced in the flask cultures. Finally, fed-batch cultivations were performed in lab-scale bioreactor, and to minimize the loss of volatile styrene during the cultivation, three consecutive bottles containing n-dodecane were connected to the air outlet of bioreactor for gas-stripping. To conclude, the total titer of styrene was as high as 5.3 ± 0.2 g/L, which could be obtained at 60 h. CONCLUSION: We successfully engineered E. coli strain for the de novo production of styrene in both flask and fed-batch cultivation, and could achieve the highest titer for styrene in bacterial hosts reported till date. We believe that our efforts in strain engineering and ISPR strategy with organic solvent will provide a new insight for economic and industrial production of styrene in a biological platform.

Development of a novel cellulase biosensor that detects crystalline cellulose hydrolysis using a transcriptional regulator.

Successful utilization of cellulose as renewable biomass depends on the development of economically feasible technologies, which can aid in enzymatic hydrolysis. In this study, we developed a whole-cell biosensor for detecting cellulolytic activity that relies on the recognition of cellobiose using the transcriptional factor CelR from Thermobifida fusca and transcriptional activation of its downstream gfp reporter gene. The fluorescence intensity of whole-cell biosensor, which was named as cellobiose-detectible genetic enzyme screening system (CBGESS), was directly proportional to the concentration of cellobiose. The strong fluorescence intensity of CBGESS demonstrated the ability to detect cellulolytic activity with two cellulosic substrates, carboxymethyl cellulose and p-nitrophenyl ß-D-cellobioside in cellulase-expressing Escherichia coli. In addition, CBGESS easily sensed crystalline cellulolytic activity when commercial Celluclast 1.5L was dropped on an Avicel plate. Therefore, CBGESS is a powerful tool for detecting cellulolytic activity with high sensitivity in the presence of soluble or insoluble cellulosic substrates. CBGESS may be further applied to excavate novel cellulases or microbes from both genetic libraries and various environments.

Development of a high-copy-number plasmid via adaptive laboratory evolution of Corynebacterium glutamicum.

Beyond its traditional role as an L-amino acid producer, Corynebacterium glutamicum has recently received significant attention regarding its use in the production of various biochemicals and recombinant proteins. However, despite these attributes, limitations in genetic tools are still hampering the engineering of C. glutamicum for use in more potential hosts. Here, we engineered a C. glutamicum via adaptive laboratory evolution to enhance the production of recombinant proteins. During the continuous cultivation, C. glutamicum producing enhanced green fluorescent proteins was screened using high-speed flow cytometer, and in the end, we successfully isolated an evolved strain with a fluorescence intensity 4.5-fold higher than that of the original strain. Extensive analysis of the evolved strain confirmed that the plasmid prepared from the evolved strain contains the nonsense mutation in the parB locus, which mutation contributed to increasing the copy number of plasmid by approximately 10-fold compared to that of the wild type. To validate the usefulness of the high-copy-number plasmid, we examined the secretory production of endoxylanase and the bioconversion of xylose to xylonate using xylonate dehydrogenase. In the fed-batch cultivation, the use of the high-copy-number plasmid led to 1.4-fold increase in the production of endoxylanase (~ 1.54 g/L in culture medium) without cell growth retardation comparing cultivation with cells harboring original plasmid. The expression of xylonate dehydrogenase in the high-copy-number plasmid also improved the bioconversion into xylonic acid by approximately 1.5-fold compared to the original plasmid.

Metabolic engineering of Corynebacterium glutamicum for fermentative production of chemicals in biorefinery.

Bio-based production of industrially important chemicals provides an eco-friendly alternative to current petrochemical-based processes. Because of the limited supply of fossil fuel reserves, various technologies utilizing microbial host strains for the sustainable production of platform chemicals from renewable biomass have been developed. Corynebacterium glutamicum is a non-pathogenic industrial microbial species traditionally used for L-glutamate and L-lysine production. It is a promising species for industrial production of bio-based chemicals because of its flexible metabolism that allows the utilization of a broad spectrum of carbon sources and the production of various amino acids. Classical breeding, systems, synthetic biology, and metabolic engineering approaches have been used to improve its applications, ranging from traditional amino-acid production to modern biorefinery systems for production of value-added platform chemicals. This review describes recent advances in the development of genetic engineering tools and techniques for the establishment and optimization of metabolic pathways for bio-based production of major C2-C6 platform chemicals using recombinant C. glutamicum.

Enhanced secretion of recombinant proteins via signal recognition particle (SRP)-dependent secretion pathway by deletion of rrsE in Escherichia coli.

Although signal recognition particle (SRP)-dependent secretion pathway, which is characterized by co-translational translocation, helps prevent cytoplasmic aggregation of proteins before secretion, its limited capacity for the protein secretion is a major hurdle for utilizing the pathway as an attractive route for secretory production of recombinant proteins. Therefore, we developed an Escherichia coli mutant, whose efficiency of secretion via the SRP pathway was dramatically increased. First, we developed a novel FACS-based screening system by combining a periplasmic display system (PECS) and direct fluorescent labeling with the organoarsenic compound, FlAsH-EDT2 . With this screening system, transposon-insertion library of E. coli was screened, and then we isolated mutants which exhibited higher protein production through the SRP pathway than the parental strain. From the genetic analysis, we found that all isolated mutants had the same mutation-disruption of the 16S rRNA gene (rrsE). The positive effect of rrsE deficiency on protein secretion via the SRP pathway was successfully demonstrated using various model proteins including endogenous SRP-dependent proteins, antibodies, and G protein-coupled receptor. For the large-scale production of IgG and GPCR, we performed fed-batch cultivation with the rrsE-deficient mutant, and very high yields of IgG (0.4 g/L) and GPCR (1.4 g/L) were obtained. Biotechnol. Bioeng. 2016;113: 2453-2461. © 2016 Wiley Periodicals, Inc.

Development of a new platform for secretory production of recombinant proteins in Corynebacterium glutamicum.

Corynebacterium glutamicum, which has been for long an industrial producer of various L-amino acids, nucleic acids, and vitamins, is now also regarded as a potential host for the secretory production of recombinant proteins. To harness its potential as an industrial platform for recombinant protein production, the development of an efficient secretion system is necessary. Particularly, regarding protein production in large-scale bioreactors, it would be appropriate to develop a secretory expression system that is specialized for high cell density cultivation conditions. Here we isolated a new signal peptide that mediates the efficient secretion of recombinant proteins under high cell density cultivation conditions. The secretome of C. glutamicum ATCC 13032 under high cell density cultivation conditions was initially investigated, and one major protein was identified as a hypothetical protein encoded by cg1514. Novel secretory production systems were then developed using the Cg1514 signal peptide and its own promoter. Efficient protein secretion was demonstrated using three protein models: endoxylanase, α-amylase, and camelid antibody fragment (VHH). For large-scale production, fed-batch cultivations were also conducted and high yields were successfully achieved--as high as 1.07 g/L (endoxylanase), 782.6 mg/L (α-amylase), and 1.57 g/L (VHH)--in the extracellular medium. From the culture media, all model proteins could be simply purified by one-step column chromatography with high purities and recovery yields. To the best of our knowledge, this is the first report of the development of an efficient secretory expression system by secretome analysis under high cell density cultivation conditions in C. glutamicum.

Metabolic engineering of Escherichia coli for the production of cinnamaldehyde.

BACKGROUND: Plant parasitic nematodes are harmful to agricultural crops and plants, and may cause severe yield losses. Cinnamaldehyde, a volatile, yellow liquid commonly used as a flavoring or food additive, is increasingly becoming a popular natural nematicide because of its high nematicidal activity and, there is a high demand for the development of a biological platform to produce cinnamaldehyde. RESULTS: We engineered Escherichia coli as an eco-friendly biological platform for the production of cinnamaldehyde. In E. coli, cinnamaldehyde can be synthesized from intracellular L-phenylalanine, which requires the activities of three enzymes: phenylalanine-ammonia lyase (PAL), 4-coumarate:CoA ligase (4CL), and cinnamoyl-CoA reductase (CCR). For the efficient production of cinnamaldehyde in E. coli, we first examined the activities of enzymes from different sources and a gene expression system for the selected enzymes was constructed. Next, the metabolic pathway for L-phenylalanine biosynthesis was engineered to increase the intracellular pool of L-phenylalanine, which is a main precursor of cinnamaldehyde. Finally, we tried to produce cinnamaldehyde with the engineered E. coli. According to this result, cinnamaldehyde production as high as 75 mg/L could be achieved, which was about 35-fold higher compared with that in the parental E. coli W3110 harboring a plasmid for cinnamaldehyde biosynthesis. We also confirmed that cinnamaldehyde produced by our engineered E. coli had a nematicidal activity similar to the activity of commercial cinnamaldehyde by nematicidal assays against Bursaphelenchus xylophilus. CONCLUSION: As a potential natural pesticide, cinnamaldehyde was successfully produced in E. coli by construction of the biosynthesis pathway and, its production titer was also significantly increased by engineering the metabolic pathway of L-phenylalanine.

Development of a high-copy plasmid for enhanced production of recombinant proteins in Leuconostoc citreum.

BACKGROUND: Leuconostoc is a hetero-fermentative lactic acid bacteria, and its importance is widely recognized in the dairy industry. However, due to limited genetic tools including plasmids for Leuconostoc, there has not been much extensive research on the genetics and engineering of Leuconostoc yet. Thus, there is a big demand for high-copy-number plasmids for useful gene manipulation and overproduction of recombinant proteins in Leuconostoc. RESULTS: Using an existing low-copy plasmid, the copy number of plasmid was increased by random mutagenesis followed by FACS-based high-throughput screening. First, a random library of plasmids was constructed by randomizing the region responsible for replication in Leuconostoc citreum; additionally, a superfolder green fluorescent protein (sfGFP) was used as a reporter protein. With a high-speed FACS sorter, highly fluorescent cells were enriched, and after two rounds of sorting, single clone exhibiting the highest level of sfGFP was isolated. The copy number of the isolated plasmid (pCB4270) was determined by quantitative PCR (qPCR). It was found that the isolated plasmid has approximately a 30-fold higher copy number (approx. 70 copies per cell) than that of the original plasmid. From the sequence analysis, a single mutation (C→T) at position 4690 was found, and we confirmed that this single mutation was responsible for the increased plasmid copy number. The effectiveness of the isolated high-copy-number plasmid for the overproduction of recombinant proteins was successfully demonstrated with two protein models Glutathione-S-transferase (GST) and α-amylase. CONCLUSIONS: The high-copy number plasmid was successfully isolated by FACS-based high-throughput screening of a plasmid library in L. citreum. The isolated plasmid could be a useful genetic tool for high-level gene expression in Leuconostoc, and for extending the applications of this useful bacteria to various areas in the dairy and pharmaceutical industries.

Metabolic engineering of Corynebacterium glutamicum for enhanced production of 5-aminovaleric acid.

BACKGROUND: 5-Aminovaleric acid (5AVA) is an important five-carbon platform chemical that can be used for the synthesis of polymers and other chemicals of industrial interest. Enzymatic conversion of L-lysine to 5AVA has been achieved by employing lysine 2-monooxygenase encoded by the davB gene and 5-aminovaleramidase encoded by the davA gene. Additionally, a recombinant Escherichia coli strain expressing the davB and davA genes has been developed for bioconversion of L-lysine to 5AVA. To use glucose and xylose derived from lignocellulosic biomass as substrates, rather than L-lysine as a substrate, we previously examined direct fermentative production of 5AVA from glucose by metabolically engineered E. coli strains. However, the yield and productivity of 5AVA achieved by recombinant E. coli strains remain very low. Thus, Corynebacterium glutamicum, a highly efficient L-lysine producing microorganism, should be useful in the development of direct fermentative production of 5AVA using L-lysine as a precursor for 5AVA. Here, we report the development of metabolically engineered C. glutamicum strains for enhanced fermentative production of 5AVA from glucose. RESULTS: Various expression vectors containing different promoters and origins of replication were examined for optimal expression of Pseudomonas putida davB and davA genes encoding lysine 2-monooxygenase and delta-aminovaleramidase, respectively. Among them, expression of the C. glutamicum codon-optimized davA gene fused with His6-Tag at its N-Terminal and the davB gene as an operon under a strong synthetic H36 promoter (plasmid p36davAB3) in C. glutamicum enabled the most efficient production of 5AVA. Flask culture and fed-batch culture of this strain produced 6.9 and 19.7 g/L (together with 11.9 g/L glutaric acid as major byproduct) of 5AVA, respectively. Homology modeling suggested that endogenous gamma-aminobutyrate aminotransferase encoded by the gabT gene might be responsible for the conversion of 5AVA to glutaric acid in recombinant C. glutamicum. Fed-batch culture of a C. glutamicum gabT mutant-harboring p36davAB3 produced 33.1 g/L 5AVA with much reduced (2.0 g/L) production of glutaric acid. CONCLUSIONS: Corynebacterium glutamicum was successfully engineered to produce 5AVA from glucose by optimizing the expression of two key enzymes, lysine 2-monooxygenase and delta-aminovaleramidase. In addition, production of glutaric acid, a major byproduct, was significantly reduced by employing C. glutamicum gabT mutant as a host strain. The metabolically engineered C. glutamicum strains developed in this study should be useful for enhanced fermentative production of the novel C5 platform chemical 5AVA from renewable resources.

Development of a potential stationary-phase specific gene expression system by engineering of SigB-dependent cg3141 promoter in Corynebacterium glutamicum.

Corynebacterium glutamicum is a non-pathogenic, non-sporulating Gram-positive soil bacterium that has been used for the industrial production of various proteins and chemicals. To achieve enhanced and economical production of target molecules, the development of strong auto-inducible promoters is desired, which can be activated without expensive inducers and has significant advantages for industrial-scale use. Here, we developed a stationary-phase gene expression system by engineering a sigma factor B (SigB)-dependent promoter that can be activated during the transition phase between exponential and stationary growth phases in C. glutamicum. First, the inducibilities of three well-known SigB-dependent promoters were examined using super-folder green fluorescent protein as a reporter protein, and we found that promoter of cg3141 (P cg3141 ) exhibited the highest inducibility. Next, a synthetic promoter library was constructed by randomizing the flanking and space regions of P cg3141 , and the stationary-phase promoters exhibiting high strengths were isolated via FACS-based high-throughput screening. The isolated synthetic promoter (P4-N14) showed a 3.5-fold inducibility and up to 20-fold higher strength compared to those of the original cg3141 promoter. Finally, the use of the isolated P4-N14 for fed-batch cultivation was verified with the production of glutathione S-transferase as a model protein in a lab-scale (5-L) bioreactor.

Enhanced production of recombinant proteins with Corynebacterium glutamicum by deletion of insertion sequences (IS elements).

BACKGROUND: In most bacteria, various jumping genetic elements including insertion sequences elements (IS elements) cause a variety of genetic rearrangements resulting in harmful effects such as genome and recombinant plasmid instability. The genetic stability of a plasmid in a host is critical for high-level production of recombinant proteins, and in this regard, the development of an IS element-free strain could be a useful strategy for the enhanced production of recombinant proteins. Corynebacterium glutamicum, which is a workhorse in the industrial-scale production of various biomolecules including recombinant proteins, also has several IS elements, and it is necessary to identify the critical IS elements and to develop IS element deleted strain. RESULTS: From the cultivation of C. glutamicum harboring a plasmid for green fluorescent protein (GFP) gene expression, non-fluorescent clones were isolated by FACS (fluorescent activated cell sorting). All the isolated clones had insertions of IS elements in the GFP coding region, and two major IS elements (ISCg1 and ISCg2 families) were identified. By co-cultivating cells harboring either the isolated IS element-inserted plasmid or intact plasmid, it was clearly confirmed that cells harboring the IS element-inserted plasmids became dominant during the cultivation due to their growth advantage over cells containing intact plasmids, which can cause a significant reduction in recombinant protein production during cultivation. To minimize the harmful effects of IS elements on the expression of heterologous genes in C. glutamicum, two IS element free C. glutamicum strains were developed in which each major IS element was deleted, and enhanced productivity in the engineered C. glutamicum strain was successfully demonstrated with three models: GFP, poly(3-hydroxybutyrate) [P(3HB)] and γ-aminobutyrate (GABA). CONCLUSIONS: Our findings clearly indicate that the hopping of IS elements could be detrimental to the production of recombinant proteins in C. glutamicum, emphasizing the importance of developing IS element free host strains.

Enhanced production of gamma-aminobutyrate (GABA) in recombinant Corynebacterium glutamicum by expressing glutamate decarboxylase active in expanded pH range.

BACKGROUND: Gamma-aminobutylate (GABA) is an important chemical in pharmacetucal field and chemical industry. GABA has mostly been produced in lactic acid bacteria by adding L-glutamate to the culture medium since L-glutamate can be converted into GABA by inherent L-glutamate decarboxylase. Recently, GABA has gained much attention for the application as a major building block for the synthesis of 2-pyrrolidone and biodegradable polyamide nylon 4, which opens its application area in the industrial biotechnology. Therefore, Corynebacterium glutamicum, the major L-glutamate producing microorganism, has been engineered to achieve direct fermentative production of GABA from glucose, but their productivity was rather low. RESULTS: Recombinant C. glutamicum strains were developed for enhanced production of GABA from glucose by expressing Escherichia coli glutamate decarboxylase (GAD) mutant, which is active in expanded pH range. Synthetic PH36, PI16, and PL26 promoters, which have different promoter strengths in C. glutamicum, were examined for the expression of E. coli GAD mutant. C. glutamicum expressing E. coli GAD mutant under the strong PH36 promoter could produce GABA to the concentration of 5.89±0.35 g/L in GP1 medium at pH 7.0, which is 17-fold higher than that obtained by C. glutamicum expressing wild-type E. coli GAD in the same condition (0.34±0.26 g/L). Fed-bath culture of C. glutamicum expressing E. coli GAD mutant in GP1 medium containing 50 µg/L of biotin at pH 6, culture condition of which was optimized in flask cultures, resulted in the highest GABA concentration of 38.6±0.85 g/L with the productivity of 0.536 g/L/h. CONCLUSION: Recombinant C. glutamicum strains developed in this study should be useful for the direct fermentative production of GABA from glucose, which allows us to achieve enhanced production of GABA suitable for its application area in the industrial biotechnology.