Feasibility of Assessing Maxillary and Mandibular Bone Mineral Density for Dental Implantation by Using Multidetector Computed Tomography.

PURPOSE: The purpose of this study was to evaluate the feasibility of measuring bone mineral density (BMD) of the maxillary and mandibular bones for dental implantation by using multidetector computed tomography (MDCT). MATERIALS AND METHODS: We performed MDCT in 141 patients (78 women and 63 men) at the lumbar vertebrae and at the maxillary and mandibular bones, with a view to dental implantation, from July 2015 to June 2017. Quantitative CT (QCT) using MDCT was performed to obtain Hounsfield unit (HU) values for the maxillary and mandibular bones and to obtain T scores for the lumbar vertebrae. We statistically analyzed the relationships among HU values, and the correlations of QCT values with T scores and of T scores with HU values. RESULTS: There were statistically significant correlations among all these parameters. CONCLUSIONS: QCT using MDCT of the maxillary and mandibular bones seems to be a feasible method for measuring BMD before dental implantation.

Comparative Study on Osseointegration of Implants After Flap and Flapless Surgery in the Mandible of Dogs.

PURPOSE: The objective of this study was to compare the implant stability and osseointegration of implants using a flap or flapless technique. MATERIAL AND METHODS: Mandibular premolars and molars were extracted from both sides in 6 dogs. After 8 weeks, 4 fixtures were implanted using either a flap or flapless technique. Implant stability quotient was measured on insertion and at 2, 4, and 8 weeks later. The animals were killed while the tissues were histologically analyzed. RESULTS: Implant stability increased for 8 weeks, and no statistically significant differences were observed between the surgical protocols. Bone-implant contact showed 60.27% ± 30.99% for flapless surgery and 59.73% ± 17.12% for flap surgery. And the results of new bone formation area from total area showed 56.07% ± 27.78% for flapless surgery and 57.00% ± 14.66% for flap surgery. There were no statistically significant differences. CONCLUSION: This study showed no significant difference in implant stability as well as osseointegration regardless of flap or flapless technique.

Incidence and Management of Fractured Dental Implants: Case Reports.

The fracture of dental implants is a rare occurrence in clinical settings. Possible causes of implant fracture include design or production flaws, overloaded occlusion force, implant location, metal fatigue, and bone resorption around the implant. This study reports on the successful removal and reimplantation of fractured implants.

Morphology of pedestrian roads and thermal responses during summer, in the urban area of Bucheon city, Korea.

The purpose of this study was to elucidate the effect of urban morphology representing sky view factor (SVF) on urban microclimate and on human thermal responses. The physical environments and the changes in body temperatures as well as psychological responses were investigated in summer in Bucheon, Korea. The dry bulb temperature ranged from 31.5 °C at SVF 0.082 site to 35.7 °C at SVF 0.922 site. Most of the environmental elements were statistically correlated to the SVF: the dry bulb temperature R (2) = 0.602, UVB R (2) = 0.556 and the illumination level R (2) = 0.609. The mean skin temperature increased up to 36.0 °C at the SVF 0.940 site and decreased to 33.9 °C at the SVF 0.082 site. The mean skin temperature was statistically correlated to the SVF (p = 0.005). However, the core body temperature was not correlated to SVF because of time delay effect to the previously exposed thermal environment. In the investigation of thermal acceptability, only 5 % of subjects were dissatisfied with the road that was covered with plentiful trees; in contrast, approximately 50 % of subjects were dissatisfied with the road with poor solar obstacles in the summer. The thermal stress was affected by the urban morphology, and the plentiful urban greening improved thermal comfort.

Histomorphometric Analysis of Contaminated Autogenous Tooth Graft Materials After Various Sterilization.

PURPOSE: The purpose of this study was to evaluate histomorphometrically contaminated autogenous tooth graft materials, which were resterilized. MATERIALS AND METHODS: The intentional defects (diameter: 8 mm, depth: 4 mm) were formed around implant fixture on the iliac crest of 6 mongrel dogs. Autogenous tooth graft materials were made by extracted premolars. After the contamination of the tooth materials, graft procedure was performed; no contaminated group (control group), contaminated groups (nonsterilization group [group 1], ethylene oxide [EO] gas group [group 2], and autoclave group [group 3]). The bone-to-implant contact (BIC) and the new bone formation rate (NBFR) were evaluated after sacrifice. RESULTS: The BIC and NBFR of groups 1 and 3 were significantly lower than the control group after 4 weeks. The BIC and NBRF of group 3 were significantly lower than the control group after 8 weeks. However, the BIC and NBRF of group 2 was not significantly different comparing with the control group after 4 and 8 weeks. CONCLUSION: Sterilization using EO gas may be more favorable than high-pressure sterilization in cases the reuse of contaminated autogenous tooth graft materials.

Early Bone Formation at a Femur Defect Using CGF and PRF Grafts in Adult Dogs: A Comparative Study.

PURPOSE: The purpose of this study was to compare the predictability of new bone formation using an autologous concentrated growth factor (CGF) graft alone and platelet graft alone. MATERIALS AND METHODS: Four bony defects of 8 mm were formed, and 3.7- × 10-mm implants were placed in the right femur. The platelet-rich fibrin (PRF), CGF, and synthetic bone were grafted to the bone defect area. Enzyme linked immunosorbent assay quantitative analysis and microscopic analysis of the fibrinogen structure were performed. RESULTS: At 4 weeks, the comparisons of each experimental group showed a significant difference between the CGF group and the synthetic bone graft group. When comparing the CGF and allograft material groups, the allograft group showed significantly more new bone formation. In the case of vascular endothelial growth factor, CGF had 1.5 times more than PRF. CGF showed a fibrinogen structure with a constant diameter. CONCLUSION: When applied to a clinical case, CGF is predicted to show better results than PRF.

Implant Stability Measurements in the Long-Term Follow-up of Dentis Implants: A Retrospective Study With Periotest.

PURPOSE: The purpose of this study was to evaluate retrospectively the stability of Dentis implant with the Periotest. METHODS: In total, 36 patients and 88 implants were investigated. Periotest was used to measure implant stability, and a periapical view was taken immediately after surgery and again immediately after, 3 months after, 6 months and 5 years after prosthesis placement. Bone loss on the periapical view, bone quality according to tactile sensation, and area of implant installation were assessed. RESULTS: The mean Periotest value (PTV) immediately after surgery was -1.02, and the mean bone loss rate (bone loss/fixture length × 100) at 6 months after prosthesis placement was 8.42%. PTV was higher with more bone loss (types III, IV vs types I, II bone). The lowest mean PTV was in the lower molar area (-1.48), followed by the lower anterior (-1.41), upper molar (0.11), and upper anterior area (5). One implant failed and survival rates were 98.9%. CONCLUSION: Implant stability was lower in cases with more bone loss and poor bone quality and in the maxilla versus the mandible.

Evaluation of bone formation after grafting with deproteinized bovine bone and mineralized allogenic bone.

PURPOSE: The purpose of this study was to evaluate the ability of new bone formation of deproteinized bovine bone (Bio-Oss) and mineralized allogenic bone (Tutoplast). MATERIALS AND METHODS: Sixty rats were divided into control and experimental groups (groups 1 and 2): control group, unfilled control; group 1, Bio-Oss; group 2, Tutoplast, respectively. The animals were killed after 6 and 12 weeks, and newly formed bone was analyzed histomorphometrically. RESULTS: In the control group, some new bone formed in the rim of the defect area. In the group 1, newly formed bone was thinner than the adjacent normal bone, and Bio-Oss particles were observed. In the group 2, showed a pattern of gradual fusion with adjacent bone, as well as particles in some areas, similar to the Bio-Oss-treated group. In the 12-week groups, the amount of new bone formation was significantly higher in the experimental groups than in the control group, and it was significantly higher in group 2 than in group 1. CONCLUSION: Although Tutoplast and Bio-Oss graft materials seem to be useful for bone grafts, Tutoplast showed more active new bone formation than Bio-Oss.

Kinematic effect of Nintendo Wii(TM) sports program exercise on obstacle gait in elderly women with falling risk.

[Purpose] This study evaluated the changes in balance ability and obstacle gait after lumbar stabilization exercise and Nintendo Wii(TM) Sports in elderly at risk for falls. [Subjects and Methods] Twenty-four elderly women with at risk for falls were randomly divided into the control, lumbar stabilization exercise, and Nintendo Wii Sports groups. Static balance was measured by the Berg Balance Scale and functional reach test, dynamic balance by the timed up-and-go test, and obstacle negotiation function by crossing velocity and maximum vertical heel clearance. [Results] Both the lumbar stabilization exercise and Nintendo Wii Sports groups showed significant improvements in obstacle negotiation function after the exercise compared to the control group. Berg Balance Scale and functional reach test scores were greater in the lumbar stabilization exercise group, while the timed up-and-go test time was significantly better in the Nintendo Wii Sports groups. [Conclusion] Lumbar stabilization exercises and Nintendo Wii Sports improve falling related balance and obstacle negotiation function in elderly women at risk for falls.

Displaced implants into maxillary sinus: report of cases.

Although the number of implant placement in the edentulous maxillary region is increasing, there are often some cases in which implants accidentally get displaced into maxillary sinus because of low bone quality, insufficient bone height, bone resorption after surgery, and improper treatment plan. Implants displaced into the maxillary sinus can cause some complications, including mucosal thickening and sinusitis; however, there are also many cases causing no symptoms at all. Treatment procedures for implants displaced into maxillary sinus are observation, removal of implants through intraoral approach, and removal through nasal cavity using endoscope. But treatment may vary according to the presence of sinusitis, ostium obstruction, and oroantral fistula. In this study, 4 patients with present illness of implants displaced into maxillary sinus were selected, and appropriate evaluation and treatment for these cases were studied.

Osteogenic ability according to the decalcified modality of auto-tooth bone grafts in peri-implant defects in dogs.

PURPOSE: The purpose of this study was to evaluate the bone generation capacity of the autotransplantation material with clinical and histological analyses after controlled acid treatment conditions. MATERIAL AND METHODS: Bony defects were formed in the femur. Then, autotransplantation material was grafted after hydroxyapatite-coated implant placement. Experimental groups were classified according to the acid treatment method: 2% H2SO4 (group 1), 2% HCl (group 2), 2% HNO3 (group 3), or 2% ethylenediaminetetraacetic acid (EDTA) (group 4). RESULTS: The new bone formation area and bone-implant contact (BIC) of the autotransplantation materials were measured after 8 weeks. The new bone formation area in experimental groups 2, 3, and 4 were greater than that in the control group (no graft) and in experimental group 1 at 8 weeks, and the BIC of experimental group 4 was greater than that in the control group and in experimental group 1; these differences showed statistical significance (P < 0.05). CONCLUSION: Auto-tooth bone treated with EDTA resulted in more effective bone formation in dogs' femurs than bone treated with other solutions.

Analysis of Core Stability Exercise Effect on the Physical and Psychological Function of Elderly Women Vulnerable to Falls during Obstacle Negotiation.

[Purpose] The aim of the present study was to investigate the effects of core stability exercise (CSE) on the physical and psychological functions of elderly women while negotiating general obstacles. [Subjects and Methods] After allocating 10 elderly women each to the core stability training group and the control group, we carried out Performance-Oriented Mobility Assessment (POMA) and measured crossing velocity (CV), maximum vertical heel clearance (MVHC), and knee flexion angle for assessing physical performances. We evaluated depression and fear of falling for assessing psychological functions. [Results] Relative to the control group, the core stability training group showed statistically significant overall changes after the training session: an increase in POMA scores, faster CV, lower MVHC, and a decrease in knee flexion angle. Furthermore, depression and fear of falling decreased significantly. [Conclusion] CSE can have a positive effect on the improvement of physical and psychological performances of older women who are vulnerable to falls as they negotiate everyday obstacles.

Videographic analysis of glottic view with increasing cricoid pressure force.

STUDY OBJECTIVE: Cricoid pressure may negatively affect laryngeal view and compromise airway patency, according to previous studies of direct laryngoscopy, endoscopy, and radiologic imaging. In this study, we assess the effect of cricoid pressure on laryngeal view with a video laryngoscope, the Pentax-AWS. METHODS: This cross-sectional survey involved 50 American Society of Anesthesiologists status I and II patients who were scheduled to undergo elective surgery. The force measurement sensor for cricoid pressure and the video recording system using a Pentax-AWS video laryngoscope were newly developed by the authors. After force and video were recorded simultaneously, 11 still images were selected per 5-N (Newton; 1 N = 1 kg·m·s(-2)) increments, from 0 N to 50 N for each patient. The effect of cricoid pressure was assessed by relative percentage compared with the number of pixels on an image at 0 N. RESULTS: Compared with zero cricoid pressure, the median percentage of glottic view visible was 89.5% (interquartile range [IQR] 64.2% to 117.1%) at 10 N, 83.2% (IQR 44.2% to 113.7%) at 20 N, 76.4% (IQR 34.1% to 109.1%) at 30 N, 51.0% (IQR 21.8% to 104.2%) at 40 N, and 47.6% (IQR 15.2% to 107.4%) at 50 N. The number of subjects who showed unworsened views was 20 (40%) at 10 N, 17 (34%) at 20 and 30 N, and 13 (26%) at 40 and 50 N. CONCLUSION: Cricoid pressure application with increasing force resulted in a worse glottic view, as examined with the Pentax-AWS Video laryngoscope. There is much individual difference in the degree of change, even with the same force. Clinicians should be aware that cricoid pressure affects laryngeal view with the Pentax-AWS and likely other video laryngoscopes.

Enhanced attachment of human osteoblasts on NH3-treated poly(L-lactic acid) membranes for guided bone regeneration.

Barrier membranes for guided bone regeneration (GBR) were prepared by a solvent casting method using solutions of poly(L-lactic acid) (PLLA) and chitosan. PLLA and PLLA/chitosan membranes were treated with ammonia gas plasma. PLLA/chitosan membranes were successfully fabricated, and the surface of the PLLA/chitosan membrane was clearly modified by NH3 plasma treatment according to attenuated total reflectance (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analyses. Additionally, water contact angle testing indicated that the hydrophilicity of these membranes was significantly increased. MG-63 cells were cultured on each type of membrane, and cell viability was examined using an MTT assay. After one week of culturing, MG-63 cells were more abundant on PLLA/chitosan membranes than on PLLA membranes. The cell viability of PLLA/chitosan membranes with plasma treatment was significantly higher than that of PLLA membranes. These results suggest that this plasma-treated membrane is suitable for GBR and is a promising source of bioactive membrane material for bone regeneration.

Consideration of various bone quality evaluation methods.

PURPOSE: Bone quality at the implant site has a significant effect on the success and prognosis of implants. The purpose of this article was to evaluate several methods used in evaluating bone quality and discuss the advantages and disadvantages. METHODS: The search was made using PubMed database about quantitative computed tomography (QCT), and quantitative cone-beam computerized tomography (QCBCT), dual energy x-ray absorptiometry (DXA) scans, the resistance force against the hands of the surgeon, assessment of the effect of the torque of the drill, the initial fixed value of the implant, and fractal analysis according to the Lekholm and Zarb, and Misch classifications as the standard. RESULTS: The method for measuring the resistance force and torque during implant placement and the method used to determine the implant's initial implant fixed value were easy and simple. QCBCT was reported to involve less radiation and to be more objective than QCT. DXA and fractal analysis have limits when used to classify bone quality as type II or type III. CONCLUSION: Among the methods used to evaluate bone quality in implants, a method using computed tomography, measured in Hounsfield units, was found to be the most predictive.

Histomorphometric analysis of bone formation in bony defects around implants in adult dogs: a comparison of grafts of low and high heat-treated autogenous tooth ash.

PURPOSE: The purpose of this study was to compare the bone formation of autogenous tooth ash treated with different temperatures. MATERIALS AND METHODS: Heat treatment was rendered by powder after extraction of teeth from dogs. The bony defects were made at iliac and resorbable blast medium surfaced implant placement and bone graft was performed; no bone graft group (control group), low heat-treated tooth ash group (group 1), high heat-treated tooth ash group (group 2). Right side had healing periods of 12 weeks, and the left side had 6 weeks. Histomorphometrical analysis was performed at 12 weeks. RESULTS: The control group had poor bone formation and showed large loose connective tissue. Group 1 displayed good healing and bone formation. Group 2 showed higher rate of bone formation than group 1 and the control group. The high heat-treated tooth ash group showed a statistically significant increase in the rate of bone formation in the early stage. CONCLUSION: The heat-treated autogenous tooth ash powder showed excellent new bone formation. The temperature of heat treatment is an important factor in new bone formation. The high heat treatment was the optimal treatment method for making tooth ash than the low heat treatment.

Important role of the C-terminal region of pig aldo-keto reductase family 1 member C1 in the NADPH-dependent reduction of steroid hormones.

The NADPH-dependent reduction activities of two paralogous pig AKR1C1s with and without 19 additional amino acid residues in C-terminus were evaluated against steroid hormones including 5alpha-dihydrotestosterone, testosterone, progesterone, androstenedione and 5alpha-androstane-3.17-dione, which act as substrates of the AKR1C1S. Among the hormones, the AKR1C1s exhibited the highest activity against 5alpha-dihydrotestosterone and the lowest activity against testosterone and progesterone. Furthermore, the AKR1C1s showed the largest differential activities against; 5alpha-dihydrotestosterone, but no such change of activities was found against progestrone and testosterone. These results suggest that the C-terminal region of AKR1C1 plays an important effect in the reduction activities of pig AKR1C1. Thus, the differential activities of two AKR1C1 paralogs observed in the present study provide important insights in understanding the molecular evolution.

Development and structure of a novel barrier membrane composed of drug-loaded poly(lactic-co-glycolic acid) particles for guided bone regeneration.

A novel barrier membrane composed of poly(lactic-co-glycolic acid) particles loaded with dexamethasone (DEX) as a bioactive molecule was produced via a modified nanoprecipitation method without any mixing. The particle membranes had a bilayer structure: one side was smooth and had a compact surface that was connected to larger particles, while the opposite side was rough, porous and connected to smaller particles. Additionally, a cross-section of the particle membrane had a porous structure with nano and micro sized irregular pores. Process optimization revealed that NaCl concentration in the water phase, with acetone as solvent and water as a non-solvent, played critical roles in determining the properties of the particle membranes, such as DEX encapsulation efficiency, thickness and surface morphologies of the particle membranes. A novel barrier membrane containing DEX using polymer particle drug capture technology has been successfully developed.

A multicenter prospective study in type IV bone of a single type of implant.

PURPOSE: To analyze the success and survival rates of the Osstem GSII (Osstem, Busan, Korea) implant in type IV bone. MATERIALS: A prospective, multicenter (5 centers) study was conducted by examining the relationship between implant success and survival rates, and several patient and surgical parameters. The implants were placed in 82 patients who visited several nationwide dental hospitals and clinics between 2007 and 2008, followed by clinical and radiographic analyses. RESULTS: In type IV bone, the implant success and survival rates were 93.23% and 95.83%, respectively. The maxillary premolar and mandibular anterior tooth areas showed success rates of 100%. The most widely used implant diameter and length was 5.0 and 13 mm, respectively, but the diameter and length had no effect on success rates. However, success rates appeared to decrease with age. CONCLUSIONS: The results indicated that the Osstem GSII implant is highly effective in poor-quality type IV bone.

Clinical study of graft materials using autogenous teeth in maxillary sinus augmentation.

PURPOSE: The purpose of this study was to evaluate the effectiveness of autogenous tooth bone graft materials. MATERIALS AND METHODS: Hundred implants in 51 patients were selected, and the patients received maxillary sinus augmentation and implant placement using autogenous tooth graft materials at the Chosun University Dental Hospital and Seoul National University Bundang Hospital between July 2009 and November 2010. RESULTS: In cases using autogenous tooth bone graft alone, or together with other graft material, the implant survival rate was 96.15%. On histomorphologic examination, autogenous tooth bone graft materials showed gradual resorption and new bone formation through osteoconduction and osteoinduction. CONCLUSIONS: The results indicated that autogenous tooth bone graft materials are appropriate for use in maxillary sinus augmentation.