Identification of novel alleles associated with insulin resistance in childhood obesity using pooled-DNA genome-wide association study approach.

BACKGROUND: Recently, we witnessed great progress in the discovery of genetic variants associated with obesity and type 2 diabetes (T2D), especially in adults. Much less is known regarding genetic variants associated with insulin resistance (IR). We hypothesized that novel IR genes could be efficiently detected in a population of obese children and adolescents who may not exhibit comorbidities and other confounding factors. OBJECTIVES: This study aimed to determine whether a genome-wide association study (GWAS), using a DNA-pooling approach, could identify novel genes associated with IR. SUBJECTS: The pooled-DNA GWAS analysis included Slovenian obese children and adolescents with and without IR matched for body mass index, gender and age. A replication study was conducted in another independent cohort with or without IR. METHODS: For the pooled-DNA GWAS, we used HumanOmni5-Quad SNP array (Illumina). Allele frequency distributions were compared with modified t-tests and χ2-tests and ranked using PLINK. Top single nucleotide polymorphisms (SNPs) were validated using individual genotyping by high-resolution melting analysis and TaqMan assay. RESULTS: We identified five top-ranking SNPs from the pooled-DNA GWAS analysis within the ECE1, IL1R2, GNPDA1, HLA-J and PYGB loci. All except SNP rs9261108 (HLA-J locus) were confirmed in the validation phase using individual genotyping. The SNP rs2258617 within PYGB remained statistically significant for both recessive and additive models in both cohorts and in a merged analysis of both cohorts and present the strongest novel candidate gene for IR. CONCLUSION: We report for the first time a pooled-DNA GWAS approach to identify five novel SNPs or genes for IR in a paediatric population. The four loci confirmed in the second validation phase study warrant further studies, especially the strongest SNP rs2258617 within PYGB, and provide targets for further basic research of IR mechanisms and for the development of potential new IR and T2D therapies.

Surface with antimicrobial activity obtained through silane coating with covalently bound polymyxin B.

Surfaces exhibiting antimicrobial activity were prepared for potential medical application. A polycationic lipopeptide polymyxin B was selected as the bioactive agent for covalent immobilization onto the surface. First, by using sol-gel technology the inert glass substrate was functionalized by a silane coating with epoxide rings to which the peptide was coupled by means of a catalyst. Preparation of the coating and presence of the peptide on the surface were followed by FTIR, XPS and AFM analyses. The obtained material showed antimicrobial effect indicating that in spite of immobilization the peptide has retained its bioactivity. The coated surface was able to reduce bacterial cell counts of the Gram-negative bacterium Escherichia coli by more than five orders of magnitude in 24 h of incubation. It can be concluded that bioactive coatings with covalently bound polycationic peptides have potential for application on medical devices where leakage into the surrounding is not allowed in order to prevent bacterial growth and biofilm formation.

Designing the structure and folding pathway of modular topological bionanostructures.

Polypeptides and polynucleotides are programmable natural polymers whose linear sequence can be easily designed and synthesized by the cellular transcription/translation machinery. Nature primarily uses proteins as the molecular machines and nucleic acids as the medium for the manipulation of heritable information. A protein's tertiary structure and function is defined by multiple cooperative weak long-range interactions that have been optimized through evolution. DNA nanotechnology uses orthogonal pairwise interacting modules of complementary nucleic acids as a strategy to construct defined complex 3D structures. A similar approach has recently been applied to protein design, using orthogonal dimerizing coiled-coil segments as interacting modules. When concatenated into a single polypeptide chain, they self-assemble into the 3D structure defined by the topology of interacting modules within the chain. This approach allows the construction of geometric polypeptide scaffolds, bypassing the folding problem of compact proteins by relying on decoupled pairwise interactions. However, the folding pathway still needs to be optimized in order to allow rapid self-assembly under physiological conditions. Again the modularity of designed topological structures can be used to define the rules that guide the folding pathway of long polymers, such as DNA, based on the stability and topology of connected building modules. This approach opens the way towards incorporation of designed foldamers in biological systems and their functionalization.

Folding studies of the cysteine proteinase inhibitor--human stefin A.

Reversible GuHCl denaturation of human stefin A (25 degrees C, pH 8) was monitored by the tyrosine fluorescence, by circular dichroism in the near UV and by circular dichroism in the far UV. In each case a midpoint of 2.8 +/- 0.1 M GuHCl was obtained, demonstrating the cooperativity of the denaturation. Kinetics of the slow folding on diluting the protein from the GuHCl denatured state, was also measured by the three spectroscopic probes (10 degrees C, pH 8). Results conform to a sequential mechanism. Denaturant concentration and temperature dependence of the slow folding were measured by fluorescence. From a linear Arrhenius plot the Ea of 100 +/- 5 kJ/mol was read. 'Double mixing' experiments revealed a slow reaction going on in the unfolded state which influenced the amplitude of the fluorescence changes. 'Double mixing' experiments performed by FPLC have shown that the folding itself, i.e., the formation of a compact state, was not dependent on the time spent under unfolding conditions.

Compactness of the molten globule in comparison to unfolded states as observed by size-exclusion chromatography.

The volumes of elution of denatured states of four proteins at high urea (8 M) and ethylurea (6 M) concentration were determined. They were found equally unfolded in both solvents. The volumes of elution of the unfolded states were compared to those of the native states and of some molten globule intermediates. It has been shown that the protein proteinase inhibitor stefin B, exhibits 'molten globule'-like properties on acid denaturation. The high salt acidic intermediate (a molten globule) as well as the native state of stefin B eluted as dimers, at 18 degrees C. On thermal denaturation above 42 degrees C, the intermediate dissociated into compact monomers. The more stable stefin A, which is monomeric and does not transform into molten globule intermediates under similar perturbing conditions, was always used for comparison. The states of both, stefin A and B in 50% methanol were found to be monomeric and of native-like compactness.

Monoclonal antibodies to human stefin B and determination of their epitopes.

Monoclonal antibodies (MAbs) to human stefin B were developed and three of them were characterised. Stefin B was cleaved into four peptides which were later subfragmented to smaller peptides. Only two peptides, of 24 and 30 amino acids, could bind to MAbs. In one instance, two peptides that were not consecutive in the sequence were recognised by the same antibody, proving that the epitope was discontinuous. Location of the epitopes was further narrowed by measuring the binding of MAbs to the complex of stefin B with papain. A sandwich ELISA (enzyme-linked immunosorbent assay), which measures the concentration of free inhibitor, was developed. It confirms that two out of three MAbs bind to different sites of stefin B. On the basis of the crystal structure of complex of stefin B with papain, the surface, accessible to a sphere with a radius of 5 A which simulates the accessibility of variable regions of antibody was determined. From the difference between accessibilities of free stefin B and stefin B in complex, the epitope location was determined more accurately.

Accessing the global minimum conformation of stefin A dimer by annealing under partially denaturing conditions.

Stefin A folds as a monomer under strongly native conditions. We have observed that under partially denaturing conditions in the temperature range from 74 to 93 degrees C it folds into a dimer, while it is monomeric above the melting temperature of 95 degrees C. Below 74 degrees C the dimer is trapped and it does not dissociate. The dimer is a folded and structured protein as judged by CD and NMR, nevertheless it is no more functional as an inhibitor of cysteine proteases. The monomer-dimer transition proceeds at a slow rate and the activation energy of dimerization at 99 kcal/mol is comparable to the unfolding enthalpy. A large and negative dimerization enthalpy of -111(+/- 8) kcal/mol was calculated from the temperature dependence of the dissociation constant. An irreversible pretransition at 10-15 deg. below the global unfolding temperature has been observed previously by DSC and can now be assigned to the monomer-dimer transition. Backbone resonances of all the dimer residues were assigned using 15N isotopically enriched protein. The dimer is symmetric and the chemical shift differences between the monomer and dimer are localized around the tripartite hydrophobic wedge, which otherwise interacts with cysteine proteases. Hydrogen exchange protection factors of the residues affected by dimer formation are higher in the dimer than in the monomer. The monomer to dimer transition is accompanied by a rapid exchange of all of the amide protons which are protected in the dimer, indicating that the transition state is unfolded to a large extent. Our results demonstrate that the native monomeric state of stefin A is actually metastable but is favored by the kinetics of folding. The substantial energy barrier which separates the monomer from the more stable dimer traps each state under native conditions.

The three-dimensional solution structure of human stefin A.

The three-dimensional solution structure of recombinant human stefin A has been determined by a simulated annealing protocol using a total of 1113 distance and angle constraints obtained from 1H and 15N HMR spectroscopy. The solution structure is represented by a family of 17 conformers with an average root-mean-square deviation relative to the mean structure of 0.44 A for backbone atoms and 0.94 A for all heavy atoms for the main body of the structure. The protein has a well-defined global fold consisting of five anti-parallel beta-strands wrapped around a central five-turn alpha-helix. There is considerable similarity between the structural features of free stefin A in solution and the X-ray structure of the homologous protein stefin B in its complex with papain, but there are also some important differences in the regions which are fundamental to proteinase binding. The differences consist primarily of two regions of high conformational heterogeneity in free stefin A which correspond in stefin B to two of the components of the tripartite wedge that docks into the active site of the target proteinase. These regions, which are shown to be mobile in solution, are the five N-terminal residues and the second binding loop. In the bound conformation of stefin B they form a turn and a short helix, respectively.

Cloning a synthetic gene for human stefin B and its expression in E. coli.

A gene coding for human stefin B was synthesized by the solid-phase phosphite method and cloned in the pUC8 cloning vector. The insert with the verified DNA sequence was subcloned into two expression vectors and expressed in E. coli as a fusion protein with beta-galactosidase and as a native protein. The CNBr cleaved fusion protein and the native recombinant stefin B were inhibitory to papain and reacted with antibodies against human stefin B.

Primary structure of a new cysteine proteinase inhibitor from pig leucocytes.

The primary structure of a pig leucocyte cysteine proteinase inhibitor, also called cathelin, was determined. The sequence was obtained from analyses of peptides isolated from the chymotryptic, endoproteinase Lys-C and protease V8 digests, and by analysis of the peptides derived from the hydrolysis of the aspartyl-prolyl bond of the carboxymethylated inhibitor. The inhibitor consists of 96 residues. The N-terminal residue of the inhibitor is pyrrolidone-carboxylic acid. The amino acid sequence of cathelin suggests the appearance of a new family of cysteine proteinase inhibitors.

The primary structure of inhibitor of cysteine proteinases from potato.

The complete amino acid sequence of the cysteine proteinase inhibitor from potato tubers was determined. The inhibitor is a single-chain protein having 180 amino acid residues. Its primary structure was elucidated by automatic degradation of the intact protein and sequence analysis of peptides generated by CNBr, trypsin and glycyl endopeptidase. A search through the protein sequence database showed homology to other plant proteinase inhibitors of different specificities and non-inhibitory proteins of M(r) around 20,000. On the basis of sequence homology, prediction of secondary structure and fold compatibility, based on a 3D-1D score to the three-dimensional profile of Erythrina caffra trypsin inhibitor, we suggest that the potato cysteine proteinase inhibitor belongs to the superfamily of proteins that have the same pattern of three-dimensional structure as soybean trypsin inhibitor. This superfamily would therefore include proteins that inhibit three different classes of proteinases-serine, cysteine and aspartic proteinases.

Simultaneous synthesis of degenerate oligonucleotides of variable length.

Most mutagenic studies have emphasized the exchange of residues but disregarded the variation in length as the other aspect of protein variability. In this report a novel strategy to simultaneously synthesize degenerate mutagenic oligonucleotides of variable length is reported. Synthesis is done on a normal automated DNA synthesizer with modifications only in the program. Product of such synthesis can be used as a mutagenic oligonucleotide for construction of mutant proteins with variable length of inserts.

Recognition of nucleic acids by Toll-like receptors and development of immunomodulatory drugs.

Microbial as well as endogenous nucleic acids are recognized by a group of endosomal Toll-like receptors TLR3, TLR7, TLR8 and TLR9. Recent discoveries significantly improved our understanding of molecular mechanism of their activation and their physiological role. Those include recognition of dsRNA through two nucleic acid binding sites of TLR3 ectodomain, activation of TLR9 by phosphodiester backbone of ssDNA, independent of the nucleotide sequence and phosphorothioate modified bonds, and the role of proteolysis in activation of TLR9. In addition, proteins that chaperone nucleic acids, such as HMGB1 or LL-37, have been described to mediate TLR activation. There is growing evidence that supports involvement of endosomal TLRs in a number of autoimmune diseases, suggesting a therapeutic potential of immunomodulatory endosomal TLR ligands. So far, inhibitory nucleic acids against TLR7, TLR8 and TLR9 as well as small compounds targeting downstream signal transduction of single or several endosomal TLRs have been reported. TLR-targeting drugs have been included in clinical trials as vaccine adjuvants or as therapeutic agents for the treatment of diseases, ranging from cancer, infections, asthma and allergy to autoimmune diseases.

Conformation and fluctuations of free stefin B: a molecular dynamics study.

Molecular dynamics study was performed on the cysteine proteinase inhibitor stefin B. Structure of inhibitor from the complex with papain was used as a starting point. Amino terminal "trunk" of the inhibitor which lies extended along the cleft of the enzyme in the complex, folded onto the body of inhibitor during MD simulation, thereby reducing the total and particularly hydrophobic surface exposed to the solvent. This effect counterbalances hydrophobic contribution of the "trunk" and explains why its deletion in stefin B and related inhibitors doesn't reduce the dissociation constant. The rest of stefin B conformation is conserved together with main chain hydrogen bonds. Fluctuations of C alpha atoms resembles crystallographic B factors with exception of residues in contact with enzyme.

Regen: program for designing gene assembly.

One of the main problems in constructing synthetic genes is the incorrect hybridisation between the oligonucleotides. The problem is resolved if the sequence uniquely defines the position of the oligonucleotide in the assembled gene. This can be accomplished through the wise partition of dsDNA sequence in the fragments. We describe a program for use in designing such gene assembly. For a given DNA sequence and the approximate location of oligonucleotide boundary it generates all sets of protruding ends that share the smallest homology.

Production of stable isotope enriched antimicrobial peptides in Escherichia coli: an application to the production of a 15N-enriched fragment of lactoferrin.

A method is described for the production of recombinant isotopically enriched peptides in E. coli. Peptides are produced in high yield as fusion proteins with ketosteroid isomerase which form insoluble inclusion bodies. This insoluble form allows easy purification, stabilizes the peptide against degradation and prevents bactericidal activity of the peptide. Cyanogen bromide cleavage released peptide which was conjugated with alkylamines to form lipopeptide. An important advantage of this system is that it allows production of peptides that are toxic to bacteria, which we have demonstrated on a dodecapeptide based on residues 21-31 of human bactericidal protein lactoferrin.

Bacterial expression and refolding of different fragments of human CD14.

We have investigated bacterial expression of several fragments of CD14, a human cellular receptor for lipopolysaccharides (LPS). Despite binding of CD14 to the LPS, a vital constituent of bacterial outer membrane, we have succeeded in producing full length recombinant hCD14 in E. coli. High level of production of CD14 resulted in deposits of aggregated CD14 in bacteria in form of inclusion bodies, which made production of this protein possible. We have also produced N-terminal fragments consisting of 134 and 152 residues, which comprise N-terminal domain with 2 and 3 leucine rich repeats, respectively and a fragment that contains only leucine rich repeats. Production of the N-terminal domain consisting of 69 residues could not be detected, probably due to the degradation of the produced protein within the bacteria. Full length CD14 and a fragment of 152 residues from inclusion bodies were refolded, while the 134 residues fragment and the one with 10 leucine-rich repeats could not be refolded. Those results confirm that the minimal folding unit of CD14 must include N-terminal domain and at least 3 leucine rich repeats.

Expression and refolding of functional fragments of the human lipopolysaccharide receptor CD14 in Escherichia coli and Pichia pastoris.

CD14 is a high-affinity cellular receptor specific for bacterial lipopolysaccharides (LPS), present in the bacterial cell wall. Binding of LPS to CD14 initiates the innate component of immune response and triggers a response that can lead to septic shock. In order to provide recombinant protein for the study of LPS-CD14 molecular interactions we have expressed human CD14 in Escherichia coli and Pichia pastoris. In bacteria, the protein was produced in high yield in the form of inclusion bodies. We have optimized the procedure for its refolding and generated correctly folded protein. A procedure to monitor the refolding efficiency by using conformation-specific anti-human CD14 monoclonal antibody has been established. A fragment of 152 amino acids of CD14 which retains the ability to bind LPS has been produced in a methylotrophic yeast, P. pastoris, expression system. The recombinant protein from yeast is glycosylated and secreted into the medium. The CD14 fragment was purified to homogeneity by immunoaffinity chromatography. Recombinant CD14 from both bacteria and yeast bind to LPS.

Structural basis for the difference in thermodynamic properties between the two cysteine proteinase inhibitors human stefins A and B.

Homology modelling has been used to model stefin A based on the X-ray structure of stefin B. Several models have been produced by interactive modelling or positioning of the side chains by Monte Carlo procedure with simulated annealing. The quality of models was evaluated by calculation of the free energy of hydration, 3D-1D potential or buried area of surface accessibility. Stefin A is a thermostable protein, exhibiting a two-state denaturation, while stefin B denatures at a 40 degrees C lower temperature and forms a stable molten globule intermediate under mild denaturing conditions. From the tertiary structures, thermodynamic functions were predicted, conforming closely to the experimental calorimetric results. Polar and apolar buried areas of surface accessibility were obtained by structural deconvolution of the thermograms. It is suggested that the basic difference between the stefins is the domination of hydrophobic interaction in the stabilization of stefin B, which is due to its non-specific nature leading to the formation of a molten globule intermediate. Modelling of stefin A predicts increased numbers of hydrogen bonds which stabilize it and increase the cooperativity of its denaturation.