RESUMO
The manipulation and regulation of valley characteristics have aroused widespread interest in emerging information fields and fundamental research. Realizing valley polarization is one crucial issue for spintronic and valleytronic applications, the concepts of a half-valley metal (HVM) and ferrovalley (FV) materials have been put forward. Then, to separate electron and hole carriers, a fresh concept of a quasi-HVM (QHVM) has been proposed, in which only one type of carrier is valley polarized for electron and hole carriers. Based on first-principles calculations, we demonstrate that the Janus monolayer VSiGeP4 has QHVM character. To well regulate the QHVM state, strain engineering is utilized to adjust the electronic and valley traits of monolayer VSiGeP4. In the discussed strain range, monolayer VSiGeP4 always favors the ferromagnetic ground state and out-of-plane magnetization, which ensures the appearance of spontaneous valley polarization. It is found that the QHVM state can be induced in different electronic correlations (U), and the strain can effectively tune the valley, magnetic, and electronic features to maintain the QHVM state under various U values. Our work opens up a new research idea in the design of multifunctional spintronic and valleytronic devices.
RESUMO
Topological phase transition can be induced by electronic correlation effects combined with spin-orbit coupling (SOC). Here, based on the first-principles calculations +U approach, the influence of electronic correlation effects and SOC on topological and electronic properties of the Janus monolayer OsClBr is investigated. With intrinsic out-of-plane (OOP) magnetic anisotropy, the Janus monolayer OsClBr exhibits a sequence of states, namely, the ferrovalley (FV) to half-valley-metal (HVM) to quantum anomalous valley Hall effect (QAVHE) to HVM to FV states with increasing U values. The QAVHE is characterized by a chiral edge state linking the conduction and valence bands with a Chern number C = 1, which is closely associated with the band inversion between dx2-y2/dxy and dz2 orbitals, and sign-reversible Berry curvature. The section with larger U values (2.31-2.35 eV) is very essential for determining the new HVM and QAVHE states, and also proves that a strong electron correlation effect exists in the interior of the Janus monolayer OsClBr. When taking into consideration a representative U value (U = 2.5 eV), a valley polarization value of 157 meV can be observed, which can be switched by reversing the magnetization direction of Os atoms. It is noteworthy that the Curie temperature (TC) strongly depends on the electronic correlation effects. Our work provides a comprehensive discussion on the electronic and topological properties of the Janus monolayer OsClBr, and demonstrates that the electronic correlation effects combined with SOC can drive the emergence of QAVHE, which will open up new opportunities for valleytronic, spintronic, and topological nanoelectronic applications.
RESUMO
It is essential to find a kind of electrocatalyst for hydrogen evolution reduction (HER) comparable with a noble metal that has good conductivity and abundant active sites. Based on systematic searches by first-principles calculations, we discovered two-dimensional transition-metal nitrides, tetra-phase OsN2 and ReN2 monolayers, as potential HER electrocatalysts with superior thermodynamic and kinetic stability. They exhibited excellent catalytic activity due to the presence of multiple active sites with a density of 8 × 1015 site per cm2 and an overpotential close to 0. In addition, we also found that the synergistic effect of strain and coverage makes them have a good hydrogen evolution activity. The ΔGH of the OsN2 monolayer at 1% tensile strain under 3/4 hydrogen coverage is 0.02 eV, and that of ReN2 at 1/2 hydrogen coverage could decrease to 0.001 eV. Different from other common transition metal nitrides, we found that the active sites of OsN2 and ReN2 monolayers are both at nitrogen atoms, which could be further understood by the crystal orbital Hamiltonian population analysis between N and metal atoms. All these interesting findings not only provide new excellent candidates but also provide new insights into the mechanism of hydrogen evolution of nitrides.
RESUMO
Nodal-ring semimetals with band crossing are the new type of quantum materials that have attracted considerable interest from scholars for research. In general, the spin-orbit coupling (SOC) effect opens a band gap at the Dirac point. Therefore, finding 2D nodal-ring semimetals with resistance to SOC has more challenges. Based on first-principles calculations, we propose here that the two-dimensional (2D) Ta2C3 monolayer is a novel nodal-ring semimetal. In particular, Ta2C3 forms six closed rings in the Brillouin zone (BZ) with SOC, which originates from the dxy,x2-y2 orbitals of Ta and the pz orbitals of C. The nodal-ring bands at the K point in Ta2C3 exhibits characteristics of valley splitting and spin polarization due to the breaking of inversion symmetry and SOC. The masximal spin-splitting at the K point is as large as 268.87 meV and 61.90 meV for the conduction band minimum (CBM) and valence band maximum (VBM), respectively. The massless Dirac fermions in the non-equivalent valley have the opposite Berry curvature and spin moment. Therefore, 2D Ta2C3 is novel spin-valley-coupled nodal-ring semimetal. In addition, we found interesting negative differential resistance effects when calculating its transport properties. Our results not only provide an ideal platform for studying the combination of new physical properties, spintronics and valleytronics, but also open the way for designing low-power and fast-transport electronic devices.
RESUMO
Two-dimensional (2D) Weyl semi-half-metals (WSHMs) have attracted tremendous interest for their fascinating properties combining half-metallic ferromagnetism and Weyl fermions. In this work, we present a NiCS3 monolayer as a new 2D WSHM material using systematic first-principles calculations. It has 12 fully spin-polarized Weyl nodal points in one spin channel with a Fermi velocity of 3.18 × 105 m s-1 and a fully gapped band structure in the other spin channel. It exhibits good mechanical and thermodynamic stabilities and the Curie temperature is estimated to be 403 K. The Weyl points are protected by vertical mirror plane symmetry along Γ-K, and each of them remains gapless even under spin-orbit coupling when the direction of spin is perpendicular to the Γ-K line including the Weyl point, which makes it possible to control the opening and closing of Weyl points by applying and rotating external magnetic fields. Our work not only provides a promising 2D WSHM material to explore the fundamental physics of symmetry protected ferromagnetic Weyl fermions, but also reveals a potential mechanism of band engineering of 2D WSHM materials in spintronics.
RESUMO
Ferroelasticity and band topology are two intriguing yet distinct quantum states of condensed matter materials. Their coexistence in a single two-dimensional (2D) lattice, however, has never been observed. Here, we found that the 2D tetragonal HfC monolayer allowed simultaneous presence of ferroelastic and topological orders. By using first-principles calculations, we found that it could allow a low switching barrier with reversible strain of 17.4%, indicating that the anisotropic properties are achievable experimentally for a 2D tetragonal lattice. More interestingly, the tuning of topological behaviors with strain led to spin-separated and gapless edge states, that is, the quantum spin Hall effect. These findings from the coupling of two quantum orders offer insights into ferroelastic control over topological edge states for achieving multifunctional properties in next-generation 2D nanodevices.
RESUMO
Topological insulating material with dissipationless edge states is a rising star in spintronics. While most two-dimensional (2D) topological insulators belong to group-IV or -V elements in a honeycomb lattice, herein, we propose a new topological phase in the 2D hexagonal group-III crystal, h-Tl, based on a tight-binding model and density-functional theory calculation. Analysis of band dispersion reveals a Dirac nodal-ring near the Fermi level, which is attributed to px,y/pz band crossing. Upon inclusion of spin-orbit coupling (SOC), h-Tl turns into a quantum spin Hall insulator under 21% biaxial strain, confirmed by integrating spin Berry curvature in the Brillouin zone and spin-polarized edge states. A prominent feature of its electronic properties is that the effect of SOC plays two essential roles of both topological gap opening and band inversion between px,y/pz orbitals, which is the first observed phenomenon in 2D materials. This study extends the scope of 2D elemental topological insulators and presents a platform to design new 2D topotronics materials.
RESUMO
A large bulk band gap is critical for the application of two-dimensional topological insulators (TIs) in spintronic devices operating at room temperature. On the basis of first-principles calculations, we predict BiXH (X = OH, SH) monolayers as TIs with an extraordinarily large bulk gap of 820 meV for BiOH and 850 meV for BiSH, and propose a tight-binding model considering spin-orbit coupling to describe the electronic properties of BiXH. These large gaps are entirely due to the strong spin-orbit interaction related to the pxy orbitals of the Bi atoms of the honeycomb lattice. The orbital filtering mechanism can be used to understand the topological properties of BiXH. The XH groups simply remove one branch of orbitals (pz of Bi) and reduce the trivial 6-band lattice into a 4-band, which is topologically non-trivial. The topological characteristics of BiXH monolayers are confirmed by nonzero topological invariant Z2 and a single pair of gapless helical edge states in the bulk gap. Owing to these features, the BiXH monolayers of the large-gap TIs are an ideal platform to realize many exotic phenomena and fabricate new quantum devices working at room temperature.
RESUMO
Correction for 'Prediction of topological property in TlPBr2 monolayer with appreciable Rashba effect' by Min Yuan et al., Phys. Chem. Chem. Phys., 2018, 20, 4308-4316.
RESUMO
A quantum spin Hall (QSH) insulator with high stability, large bulk band gap and tunable topological properties is crucial for both fundamental research and practical application due to the presence of dissipationless edge conducting channels. Recently, chemical functionalization has been proposed as an effective route to realize the QSH effect. Based on first-principles calculations, we predict that a two-dimensional TlP monolayer would convert into a topological insulator with the effect of bromination, accompanied by a large bulk band gap of 76.5 meV, which meets the requirement for room-temperature application. The topological nature is verified by the calculation of Z2 topological invariant and helical edge states. Meanwhile, an appreciable Rashba spin splitting of 77.2 meV can be observed. The bulk band gap can be effectively tuned with external strain and electric field, while the Rashba spin splitting shows a parabolic variation trend under an external electric field. We find that the topological property is available for the TlP film when the coverage rate is more than 0.75. BN and SiC are demonstrated as promising substrates to support the topological nature of TlPBr2 film. Our findings suggest that a TlPBr2 monolayer is an appropriate candidate for hosting the nontrivial topological state and controllable Rashba spin splitting, and shows great potential applications in spintronics.
RESUMO
Topological phases, especially topological crystalline insulators (TCIs), have been intensively explored and observed experimentally in three-dimensional (3D) materials. However, two-dimensional (2D) films are explored much less than 3D TCIs, and even 2D topological insulators. Based on ab initio calculations, here we investigate the electronic and topological properties of 2D PbTe(001) few-layer films. The monolayer and trilayer PbTe are both intrinsic 2D TCIs with a large band gap reaching 0.27 eV, indicating a high possibility for room-temperature observation of quantized conductance. The origin of the TCI phase can be attributed to the px,y-pz band inversion, which is determined by the competition of orbital hybridization and the quantum confinement effect. We also observe a semimetal-TCI-normal insulator transition under biaxial strains, whereas a uniaxial strain leads to Z2 nontrivial states. In particular, the TCI phase of a PbTe monolayer remains when epitaxially grown on a NaI semiconductor substrate. Our findings on the controllable quantum states with sizable band gaps present an ideal platform for realizing future topological quantum devices with ultralow dissipation.
RESUMO
The quantum spin Hall (QSH) effect is promising for achieving dissipationless transport devices due to the robust gapless states inside the insulating bulk gap. However, QSH insulators currently suffer from requiring extremely high vacuums or low temperatures. Here, using first-principles calculations, we predict cyanogen-decorated plumbene (PbCN) to be a new QSH phase, with a large gap of 0.92 eV, that is robust and tunable under external strain. The band topology mainly stems from s-pxy band inversion related to the lattice symmetry, while the strong spin-orbit coupling (SOC) of the Pb atoms only opens a large gap. When halogen atoms are incorporated into PbCN, the resulting inversion-asymmetric PbFx(CN)1-x can host the QSH effect, accompanied by the presence of a sizable Rashba spin splitting at the top of the valence band. Furthermore, the Te(111)-terminated BaTe surface is proposed to be an ideal substrate for experimental realization of these monolayers, without destroying their nontrivial topology. These findings provide an ideal platform to enrich topological quantum phenomena and expand the potential applications in high-temperature spintronics.
RESUMO
Searching for realistic materials able to realize room-temperature quantum spin Hall (QSH) effects is currently a growing field, especially when compatibility with the current group-IV electronics industry is required. Here we predict, through first-principles calculations, a new class of QSH phases in flattened germanene and stanene functionalized with X atoms (f-GeX2 and f-SnX2; X = H, F, Cl, Br, I) with a bulk gap as large as 0.56 eV, that can be tuned efficiently under mechanical strain. More interestingly, different from the normal band order in buckled germanane and stanane, the structural flatness leads to an inverted band order without spin-orbit coupling (SOC), whereas the SOC only opens the band gap. We also find that the characteristics of edge states, such as the Fermi velocity, are enhanced greatly by edge modification. When these films are deposited on a BN substrate, a nontrivial QSH state is preserved with a Dirac cone lying within the nontrivial band gap. These findings provide a promising platform for future realistic applications of the QSH effect at room temperature in two-dimensional group-IV films.
RESUMO
The control of spin without a magnetic field is one of the challenges in developing spintronic devices. Here, based on first-principles calculations, we predict a new kind of ferromagnetic half-metal (HM) with a Curie temperature of 244 K in a two-dimensional (2D) germanene van der Waals heterostructure (HTS). Its electronic band structures and magnetic properties can be tuned with respect to external strain and electric field. More interestingly, a transition from HM to bipolar-magnetic-semiconductor (BMS) to spin-gapless-semiconductor (SGS) in a HTS can be realized by adjusting the interlayer spacing. These findings provide a promising platform for 2D germanene materials, which hold great potential for application in nanoelectronic and spintronic devices.
RESUMO
It is challenging to epitaxially grow germanene on conventional semiconductor substrates. Based on first-principles calculations, we investigate the structural and electronic properties of germanene/germanane heterostructures (HTSs). The results indicate that the Dirac cone with nearly linear band dispersion of germanene is maintained in the band gap of the substrate. Remarkably, the band gaps opened in these HTSs can be effectively modulated by the external electric field and strain, and they also feature very low effective masses and high carrier mobilities. These results provide a route to design high-performance FETs operating at room temperature in nanodevices.
RESUMO
We perform first-principles calculations to study the geometric, energetics and electronic properties of graphene supported on BC3 monolayer. The results show that overall graphene interacts weakly with BC3 monolayer via van der Waals interaction. The energy gap of graphene can be up to â¼0.162 eV in graphene/BC3 heterobilayers (G/BC3 HBLs), which is large enough for the gap opening at room temperature. We also find that the interlayer spacing and in-plane strain can tune the band gap of G/BC3 HBLs effectively. Interestingly, the characteristics of a Dirac cone with a nearly linear band dispersion relationship of graphene can be preserved, accompanied by a small electron effective mass, and thus the higher carrier mobility is still expected. These findings provide a possible way to design effective FETs out of graphene on a BC3 substrate.
RESUMO
We performed first-principles calculations to study the adsorption characteristics of alkali, alkali-earth, group III, and 3d transition-metal (TM) adatoms on germanene. We find that the adsorption of alkali or alkali-earth adatoms on germanene has minimal effects on geometry of germanene. The significant charge transfer from alkali adatoms to germanene leads to metallization of germanene, whereas alkali-earth adatom adsorption, whose interaction is a mixture of ionic and covalent, results in semiconducting behavior with an energy gap of 17-29 meV. For group III adatoms, they also bind germanene with mixed covalent and ionic bonding character. Adsorption characteristics of the transition metals (TMs) are rather complicated, though all TM adsorptions on germanene exhibit strong covalent bonding with germanene. The main contributions to the strong bonding are from the hybridization between the TM 3d and Ge pz orbitals. Depending on the induced-TM type, the adsorbed systems can exhibit metallic, half-metallic, or semiconducting behavior. Also, the variation trends of the dipole moment and work function with the adsorption energy across the different adatoms are discussed. These findings may provide a potential avenue to design new germanene-based devices in nanoelectronics.
RESUMO
It is both conceptually and practically fascinating to explore fundamental research studies and practical applications of two-dimensional systems with the tunable abundant valley Hall effect. In this work, based on first-principles calculations, the tunable abundant valley Hall effect is proved to appear in Janus monolayer VCGeN4. When the magnetization is along the out-of-plane direction, VCGeN4 is an intrinsic ferromagnetic semiconductor with a valley feature. The intriguing spontaneous valley polarization exists in VCGeN4 due to the common influence of broken inversion and time-reversal symmetries, which makes it easier to realize the anomalous valley Hall effect. Furthermore, we observe that the valley-non-equilibrium quantum anomalous Hall effect is driven by external strain, which is located between two half-valley-metal states. When reversing the magnetization, the spin flipping makes the position of the edge state to change from one valley to another valley, demonstrating an intriguing behavior known as chiral spin-valley locking. Although the easy magnetic axis orientation is along the in-plane direction, we can utilize an external magnetic field to transform the magnetic axis orientation. Moreover, it is found that the valley state, electronic and magnetic properties can be well regulated by the electric field. Our works explore the mechanism of the tunable abundant valley Hall effect by applying an external strain and electric field, which provides a perfect platform to investigate the spin, valley, and topology.
RESUMO
The Dzyaloshinskii-Moriya interaction (DMI), which only exists in noncentrosymmetric systems, plays an important role in the formation of exotic chiral magnetic states. However, the absence of the DMI occurs in most two-dimensional (2D) magnetic materials due to their intrinsic inversion symmetry. Here, by using first-principles calculations, we demonstrate that a significant DMI can be obtained in a series of Janus monolayers of dichalcogenides XSeTe (X = Nb, Re) in which the difference between Se and Te on the opposite sides of X breaks the inversion symmetry. Remarkably, the DMI amplitudes of NbSeTe (1.78 meV) and ReSeTe (4.82 meV) are larger than the experimental value of Co/graphene (0.16 meV), and NbSeTe and ReSeTe monolayers have a high Curie temperature of 1023 K and 689 K, respectively. Through the micromagnetic simulation of XSeTe (X= Nb, Re) simulations, we also find that the ReSeTe monolayer can performance for skyrmion states by applying an external magnetic field, and importantly, the skyrmion states can be regulated and controlled under external strain. The findings pave the way for device concepts using chiral magnetic structures in specially designed 2D ferromagnetic materials.
RESUMO
Topology and ferrovalley (FV) are two essential concepts in emerging device applications and the fundamental research field. To date, relevant reports are extremely rare about the coupling of FV and topology in a single system. By Monte Carlo (MC) simulations and first-principles calculations, a stable intrinsic FV ScBrI semiconductor with high Curie temperature (TC) is predicted. Because of the combination of spin-orbital coupling (SOC) and exchange interaction, the Janus monolayer ScBrI shows a spontaneous valley polarization of 90 meV, which is located in the top valence band. For the magnetization direction perpendicular to the plane, the changes from FV to half-valley-metal (HVM), to valley-nonequilibrium quantum anomalous Hall effect (VQAHE), to HVM, and to FV can be induced by strain engineering. It is worth noting that there are no particular valley polarization and VQAHE states for in-plane (IP) magnetic anisotropy. By obtaining the real magnetic anisotropy energy (MAE) under different strains, due to spontaneous valley polarization, intrinsic out-of-plane (OOP) magnetic anisotropy, a chiral edge state, and a unit Chern number, the VQAHE can reliably appear between two HVM states. The increasing strains can induce VQAHE, which can be clarified by a band inversion between dx2-y2/dxy and dz2 orbitals, and a sign-reversible Berry curvature. Once synthesized, the Janus monolayer ScBrI would find more significant applications in topological electronic, valleytronic, and spintronic nanodevices.