Enhancement of Stability and Antioxidant Activity of Mulberry Anthocyanins Through Succinic Acid Acylation.

Research background: Anthocyanins possess valuable health-promoting activities with significant health benefits for humans. However, their instability is a limiting factor for their usage in functional foods and beverages. Experimental approach: In this work, a new method to enhance the stability of anthocyanins from mulberry fruit through acylation by using succinic acid as a selected acyl donor was explored. The Box-Behnken design of response surface methodology was applied to determine the optimized conditions for the acylation process. Results and conclusions: The highest acylation conversion rate was 79.04% at anthocyanins to succinic acid mass ratio 1:8.96, acylation duration 3 h and temperature 50 °C. Structural analysis of acylated anthocyanins revealed that succinic acid introduces a C-O-C bond and a hydroxyl group. The thermostability and light stability of mulberry anthocyanins were significantly improved after acylation, and the antioxidant activity expressed as total reducing power and Fe2+-chelating capacity of the acylated anthocyanins was also enhanced. Novelty and scientific contribution: Succinic acid acylation provides a novel method for stabilizing mulberry anthocyanins, as evidenced by the increased stability and antioxidant ability of anthocyanins, and thus facilitates its use in the food and nutraceutical industries.

Paper-based immune-affinity arrays for detection of multiple mycotoxins in cereals.

Mycotoxins produced by different species of fungi may coexist in cereals and feedstuffs, and could be highly toxic for humans and animals. For quantification of multiple mycotoxins in cereals, we developed a paper-based mycotoxin immune-affinity array. First, paper-based microzone arrays were fabricated by photolithography. Then, monoclonal mycotoxin antibodies were added in a copolymerization reaction with a cross-linker to form an immune-affinity monolith on the paper-based microzone array. With use of a competitive immune-response format, paper-based mycotoxin immune-affinity arrays were successfully applied to detect mycotoxins in samples. The detection limits for deoxynivalenol, zearalenone, T-2 toxin, and HT-2 toxin were 62.7, 10.8, 0.36, and 0.23 µg·kg-1, respectively, which meet relevant requirements for these compounds in food. The recovery rates were 81-86% for deoxynivalenol, 89-117% for zearalenone, 79-86% for T-2 toxin, and 78-83% for HT-2 toxin, and showed the paper-based immune-affinity arrays had good reproducibility. In summary, the paper-based mycotoxin immune-affinity array provides a sensitive, rapid, accurate, stable, and convenient platform for detection of multiple mycotoxins in agro-foods. Graphical abstract Paper-based immune-affinity monolithic array. DON deoxynivalenol, HT-2 HT-2 toxin, T-2 T-2 toxin, PEGDA polyethylene glycol diacrylate, ZEN zearalenone.

Immune-affinity monolithic array with chemiluminescent detection for mycotoxins in barley.

BACKGROUND: Mycotoxins are produced by fungi as secondary metabolites. They often multi-contaminate food and feed commodities posing a health risk to humans and animals. Fast and easy multiplex screening could be thought as a useful tool for detection of multi-contaminated food and feed commodities. RESULTS: A highly sensitive immune-affinity monolithic arrays for detecting the mycotoxins zearalenone, deoxynivalenol, T-2 toxin, HT-2 toxin, aflatoxins, ochratoxin A, and fumonisin B1 were fabricated using UV induced co-polymerisation. The mycotoxin antibodies firstly reacted with functional monomer to form antibody/functional monomer bio-conjugates. Subsequently, the antibody/functional monomer bio-conjugates co-polymerised with cross-linker to form mycotoxins immune-affinity arrays. With optimal fabrication conditions, all mycotoxin immune-affinity monolithic arrays exhibited a linear response spanning three orders of magnitude. And the immune-affinity monolithic array has a low detection limit and has a good uniformity (intra-assay CV, and inter-assay CV both <8%). CONCLUSION: The fabricated mycotoxin immune-affinity monolithic arrays were proved as a sensitive, stable and economical tool in real food samples detection. Moreover, the mycotoxin immune-affinity monolithic arrays would be able to minimise manipulation steps: add samples and enzyme labelled mycotoxins, and detect CL signals. © 2016 Society of Chemical Industry.

[Effects of Film Mulching on Soil Quality, Garlic Yield, and Garlic Quality].

To determine the optimal film management technique for garlic planting, this study aimed to investigate the effects of various film cover methods on soil quality and garlic yield in garlic cropping systems. To achieve these goals, trials with different film cover methods were conducted at the Jiangsu Academy of Agricultural Sciences in Nanjing. To investigate the impact of changes in soil quality and garlic yield, we set up four treatments： no film treatment （CK）, black polyethylene film treatment （HPE）, black poly（butylene- adipate-co-terephthalate） （PBAT） with straw composite film treatment （HSJ）, and white PBAT film treatment （BJ） in a garlic cropping system. Our results indicated that specific mulch coverings had a positive effect on both soil quality and garlic yield. The film cover treatments resulted in significant changes in soil physicochemical properties and bacterial and fungal biomasses and indirectly improved soil quality. Compared to that under the no film treatment, the BJ treatment boosted soil quality by 70%, with the most significant impact, followed by that under the HPE and HSJ treatments, with improvements of 52% and 36%. Random forest modeling indicated that soil organic matter and total nitrogen were the most important factors influencing soil quality. The different film covers significantly increased the diameter of garlic bulbs and single quality. The HSJ treatment exhibited the most significant increase in garlic yield, with 46%, 19%, and 6% improvement compared to that in the CK, HPE, and BJ treatments, respectively. Correlation analysis showed that soil quality under film cover was significantly correlated with the starch content of garlic bulbs, garlic diameter, and single quality. This study highlights that selecting the appropriate mulch film aids in the production of garlic and helps to develop farmland that produces both high-quality and high-yield crops.

Selective and Controlled Release Responsive Nanoparticles with Adsorption-Pairing Synergy for Anthocyanin Extraction.

Anthocyanins with different structures have different anti-inflammatory and anti-cancer properties. Precise structural use can improve the chemopreventive effects of anthocyanins and enhance treatment outcomes because the anthocyanin structure influences its functional sites and activities. However, owing to the available variety of anthocyanins and their complex structures, the low matching of intermolecular forces between existing adsorbents and anthocyanins limits the targeted separation of anthocyanin monomers. Short-range and efficient selective binding, which is difficult to achieve, is the current focus in the extraction field. We here developed self-assembled Fe3O4-based nano adsorbers with different surface modifications based on adsorption-pairing synergy. The electrostatic force, coordination bond, hydrogen bond, and π-π* bond together induced selective adsorption between Fe3O4 nanoparticles and anthocyanin molecules. An acid-release solution disrupted the polarity balance in the aforementioned association system, thereby promoting the controlled release of anthocyanins. Among the candidates, the effects of morphology, particle size, surface charge, and functional group on adsorption performance were analyzed. The polyacrylamide-modified magnetic Fe3O4 nanoparticles were found to be favorable for selectively extracting anthocyanin, with an adsorption capacity of 19.74 ± 0.07 mg g-1. The release percentage of cyanidin-3-O-glucoside reached up to 98.6% ± 1.4%. This study offers a scientific basis for developing feasible nanotechniques to extract anthocyanins and plant active substances.

Twice-milled magnetic biochar: A recyclable material for efficient removal of methylene blue from wastewater.

Although magnetic modification has potential for preparing recyclable biochar, the traditional preparation methods of loading magnetic materials on biochar will probably lead to pore blockage and consequently remarkable adsorption recession. Herein, a preparation method was developed in which ball milled biochar was loaded with ultrafine magnetite and then milled for a second time, thus generating a magnetic, recyclable biochar with minimal pore blockage. The deposits of magnetite did not significantly wrap the biochar, although a decreased sorption performance was still detectable. Benefitting from the extra milling step, surface functional groups and specific surface areas of the adsorbents were largely restored, thus leading to a 93.8 % recovery adsorption of 84.6 ± 2.5 mg/L on methylene blue. Meanwhile, the recyclability of the material was not affected. The adsorption was driven by multiple interactions. These twice-milled magnetic biochar is quite outstanding for sustainable removal of aqueous contaminants with its recyclability and high sorption efficiency.

Magnetic nanostructure and biomolecule synergistically promoted Suaeda-inspired self-healing hydrogel composite for seawater evaporation.

Multifunctional hydrogels with excellent comprehensive performance are essential prerequisite for the implementation of effective water resources technology with high efficiency and low energy consumption. Inspired by the water purification and self-healing properties of natural plants, and based on the synergy of photothermal and biological effects, high photothermal Fe3O4 nanoparticles and natural polyhydroxy oligomeric proanthocyanidin (OPC) are introduced into a water-active polyvinyl alcohol (PVA) hydrogel. Two new bio-hydrogels of PVA/Fe3O4/graphite and PVA/OPC with self-healing and stretchable properties are proposed and designed. The obtained hydrogels exhibit reversible covalent cross-linked water-promoted healing (chemically) and photothermal melting/recrystallization healing (physically). The double-layered hydrogel composite demonstrates a dual response function (sunlight and near-infrared light), along with water purification properties. It is prepared through a water spray triggered self-healing process. The ultimate fracture strain of the photothermal layer and purification layer hydrogel was more than 1000% and 400% respectively after self-healing.After 48 h of hydrogel composite adsorption, the color of a methylene blue solution faded, and the absorption peak at 664 nm decreased. In addition, this research adopts a phased evaporation method to concentrate local energy and provide power for seawater evaporation. The evaporation efficiency of seawater induced by near-infrared (NIR) light was up to 3.15 kg m-2 h-1, whereas that under sunlight was 1.25 kg m-2 h-1. Selection of the evaporation excitation light source allowed control of the evaporation efficiency. The proposed technology is expected to be widely applicable to the staged evaporation of seawater as well as water purification.

Studies on the interactional characterization of preheated silkworm pupae protein (SPP) with anthocyanins (C3G) and their effect on anthocyanin stability.

In this paper, the interaction of silkworm pupae protein (SPP) with cyanidin-3-O-glucoside (C3G) was studied the protective anthocyanins stability. Characterization experiments suggested that C3G-SPP complexes mainly through hydrophobic interactions, with a decrease in the α-helix content and increases in the ß-sheet and ß-turn contents. Fluorescence results revealed that C3G quenched the intrinsic fluorescence of SPP by static quenching. The highest quenching constant, Kq, was recorded to be1.26 × 1012 M-1s-1 for the SPP preheated at 80 °C. Following the C3G-SPP complexes, the degradation rate constant decreased, and the half-life of C3G was prolonged from 64.81 ± 1.07 to 261.99 ± 13.32 min at 80 °C (p < 0.05). The SPP preheated at 80 °C exhibited the highest binding affinity towards C3G and also effectively increased the thermal and oxidative stability of the C3G. The obtained results suggest that the novel protein proposed in this study could expand the application of anthocyanins as stable, functional food ingredients.

Synthesis of Double-Shelled Hollow Inorganic Nanospheres through Block Copolymer-Metal Coordination and Atomic Layer Deposition.

Double-shelled hollow (DSH) structures with varied inorganic compositions are confirmed to have improved performances in diverse applications, especially in lithium ion battery. However, it is still of great challenge to obtain these complex nanostructures with traditional hard templates and solution-based route. Here we report an innovative pathway for the preparation of the DSH nanospheres based on block copolymer self-assembly, metal-ligand coordination and atomic layer deposition. Polymeric composite micelles derived from amphiphilic block copolymers and ferric ions were prepared with heating-enabled micellization and metal-ligand coordination. The DSH nanospheres with Fe2O3 stands inner and TiO2 outer the structures can be obtained with atomic layer deposition of a thin layer of TiO2 followed with calcination in air. The coordination was carried out at room temperature and the deposition was performed at the low temperature of 80 °C, thus providing a feasible fabrication strategy for DSH structures without destruction of the templates. The cavity and the outer layer of the structures can also be simply tuned with the utilized block copolymers and the deposition cycles. These DSH inorganic nanospheres are expected to find vital applications in battery, catalysis, sensing and drug delivery, etc.

Preparation and pH Controlled Release of Fe3O4/Anthocyanin Magnetic Biocomposites.

Anthocyanins are a class of antioxidants extracted from plants, with a variety of biochemical and pharmacological properties. However, the wide and effective applications of anthocyanins have been limited by their relatively low stability and bioavailability. In order to expand the application of anthocyanins, Fe3O4/anthocyanin magnetic biocomposite was fabricated for the storage and release of anthocyanin in this work. The magnetic biocomposite of Fe3O4 magnetic nanoparticle-loaded anthocyanin was prepared through physical intermolecular adsorption or covalent cross-linking. Scanning electron microscopy (SEM), Dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and thermal analysis were used to characterize the biocomposite. In addition, the anthocyanin releasing experiments were performed. The optimized condition for the Fe3O4/anthocyanin magnetic biocomposite preparation was determined to be at 60 °C for 20 h in weak alkaline solution. The smooth surface of biocomposite from SEM suggested that anthocyanin was coated on the surface of the Fe3O4 particles successfully. The average size of the Fe3O4/anthocyanin magnetic biocomposite was about 222 nm. Under acidic conditions, the magnetic biocomposite solids could be repeatable released anthocyanin, with the same chemical structure as the anthocyanin before compounding. Therefore, anthocyanin can be effectively adsorbed and released by this magnetic biocomposite. Overall, this work shows that Fe3O4/anthocyanin magnetic biocomposite has great potential for future applications as a drug storage and delivery nanoplatform that is adaptable to medical, food and sensing.