RESUMO
Fullerene-based amphiphiles are new types of monomers that form self-assemblies with profound applications. The conical fullerene amphiphiles (CFAs) have attracted attention for their uniquely self-assembled structures and have opened up a new field for amphiphile research. The CFAs and CFAs with different substances embedded in cavities are designed and their self-assembly behaviors are investigated using molecular dynamics (MD) simulations. The surface and internal structures of the micelles are analyzed from various perspectives, including micelle size, shape, and solvent-accessible surface area (SASA). The systems studied are all oblate micelles. In comparison, embedding Cl- or embedding Na+ in the cavities results in larger micelles and a larger deviation from the spherical shape. Two typical configurations of fullerene surfactant micelles, quadrilateral plane and tetrahedral structure, are presented. The dipole moments of the fullerene molecules are also calculated, and the results show that the embedded negatively charged Cl- leads to a decrease in the polarity of the pure fullerene molecules, while the embedded positively charged Na+ leads to an increase.
RESUMO
Two-dimensional (2D) layered materials demonstrate prominent advantage in regulating lithium plating/stripping behavior by confining lithium diffusion/plating within interlayer gaps. However, achieving effective interlayer confined lithium diffusion/plating without compromising the stability of bulk-structural and the solid electrolyte interphase (SEI) remains a considerable challenge. This paper presents an electrochemical scissor and lithium zipper-driven protocol for realizing interlayer confined lithium plating with pretty-low strain and volume change. In this protocol, lithium serves as a "zipper" to reunite the adjacent MXene back to MAX-like phase to markedly enhance the structural stability, and a lithium halide-rich SEI is formed by electrochemically removing the terminals of halogenated MXenes to maintain the stability and rapid lithium ions diffusion of SEI. When the Ti3 C2 I2 serves as the host for lithium plating, the average coulomb efficiency exceeds 97.0 % after 320 lithium plating/stripping cycles in conventional ester electrolyte. Furthermore, a full cell comprising of LiNi0.8 Mn0.1 Co0.1 O2 and Ti3 C2 I2 @Li exhibits a capacity retention rate of 73.4 % after 200 cycles even under high cathode mass-loading (20â mg cm-2 ) and a low negative/positive capacity ratio of 1.4. Our findings advance the understanding of interlayer confined lithium plating in 2D layered materials and provide a new direction in regulating lithium and other metal plating/stripping behaviors.
RESUMO
The aggregation structure of Triton X (TX) amphiphilic molecules in aqueous solution plays an important role in determining the various properties and applications of surfactant solutions. In this paper, the properties of micelles formed by TX-5, TX-114, and TX-100 molecules with different poly(ethylene oxide) (PEO) chain lengths in TX series of nonionic surfactants were studied via molecular dynamics (MD) simulation. The structural characteristics of three micelles were analyzed at the molecular level, including the shape and size of micelles, the solvent accessible surface area, the radial distribution function, the micelle configuration, and the hydration numbers. With the increase of PEO chain length, the micelle size and solvent accessible surface area also increase. The distribution probability of the polar head oxygen atoms on the surface of the TX-100 micelle is higher than that in the TX-5 or TX-114 micelle. In particular, the tail quaternary carbon atoms in the hydrophobic region are mainly located at the micelle exterior. For TX-5, TX-114, and TX-100 micelles, the interactions between micelles and water molecules are also quite different. These structures and comparisons at the molecular level contribute to the further understanding of the aggregation and applications of TX series surfactants.
RESUMO
Betaine is a kind of zwitterionic surfactant with both positive and negative charge groups on the polar head, showing good surface activity and aggregation behaviors. The interfacial adsorption, structures and properties of n-dodecyl betaine (NDB) at different surface coverages at the air-water interface are studied through molecular dynamics (MD) simulations. Interactions between the polar heads and water molecules, the distribution of water molecules around polar heads, the tilt angle of the NDB molecule, polar head and tail chain with respect to the surface normal, the conformations and lengths of the tail chain, and the interfacial thickness of the NDB monolayer are analyzed. The change of surface coverage hardly affects the locations and spatial distributions of the water molecules around the polar heads. As more NDB molecules are adsorbed at the air-water interface, the number of hydrogen bonds between polar heads and water molecules slightly decreases, while the lifetimes of hydrogen bonds become larger. With the increase in surface coverage, less gauche defects along the alkyl chain and longer NDB chain are obtained. The thickness of the NDB monolayer also increases. At large surface coverages, tilted angles of the polar head, tail chain and whole NDB molecule show little change with the increase in surface area. Surface coverages can change the tendency of polar heads and the tail chain for the surface normal.
RESUMO
AIMS: Tendon development requires the coordinated interaction of muscles and tendons. Muscle-derived cells (MDCs), a mixed cell population containing both myogenic and fibroblastic cell subsets, have been found to be ideal seed cells for tendon regeneration. However, the necessity of these cell types for tendon regeneration has not yet been tested. In this study, we aim to explore the possible synergistic effects of myogenic cells and fibroblasts in engineered tendon regeneration. METHODS: MDCs were separated into rapidly adhering cell (RAC; fibroblasts) and slowly adhering cell (SAC; myogenic cells) populations. Myogenic- and tenogenic-related molecules were analyzed by immunofluorescent staining, RT-PCR and real-time PCR. The proliferative abilities of MDCs, RACs and SACs were also evaluated. Cell-scaffold constructs were implanted into nude mice, and subsequently evaluated for their histologic, ultrastructure, gene expression, and biomechanical characteristics. RESULTS: MDCs have better proliferative activity than RAC and SAC population. RACs could express higher levels of tenogenic-related molecules tenomodulin (TNMD) and scleraxis (SCX) than SACs. Whereas SACs only expressed myogenic-related molecules MyoD. In contrast to the tendons engineered using RACs and SACs, the tendons engineered using MDCs exhibited a relatively more mature and well-organized tissue structure and ultrastructure as well as better mechanical properties. CONCLUSIONS: Fibroblasts in muscle may be the primary cell population involved in tendon regeneration and that myogenic cells are an important component of the niche and control the fibroblast activity during tendon regeneration. The synergistic effects between fibroblasts and myogenic cells significantly contribute to efficient and effective regeneration of engineered tendons.
Assuntos
Tendões , Engenharia Tecidual , Animais , Diferenciação Celular , Fibroblastos , Proteínas de Membrana , Camundongos , Camundongos Nus , Músculos , Regeneração , Tendões/patologiaRESUMO
W-plasty is a very popular scar excisional revision technique. The core of the technique is to break up the scar margins into small triangular components, so as to cause light scattering and make the scar less noticeable. However, due to skin tension, facial incision scars tend to spread. Applying W-plasty alone cannot achieve the ideal repair effect of facial scars. In this study, we proposed a scar revision technique combined W-plasty with continuous tension-reduction (CTR) technique to improve the appearance of facial scars. Sixty patients with facial scar were comprised in this retrospective study. Scars were assessed independently using the scar scale before and at 12-month follow-up. Clinical results showed a significant difference in scar appearance between different groups at 12-month follow-up. Vancouver scar scale (VSS), visual analogue scale (VAS) scores, and patient satisfaction were significant better in W-plasty and CTR than other groups at 12-month follow-up. No severe complications were reported. The application of the tension offloading device provides an environment where the tension is continuously reduced, which could greatly decrease tension on the surgical incision. Combined with W-plasty, this technique could significantly improve the scar's aesthetic appearance.
Assuntos
Cicatriz , Procedimentos de Cirurgia Plástica , Cicatriz/patologia , Estética , Humanos , Procedimentos de Cirurgia Plástica/métodos , Estudos Retrospectivos , Transplante de Pele/métodosRESUMO
Hand burns are frequently seen in children, often resulting in digital flexion contractures. Traditional split-thickness or full-thickness skin grafts leave notably different skin texture and hyperpigmentation. The purpose of this study was to describe our operation for treating digital flexion contractures with full-thickness plantar skin grafts, and to evaluate the appearance and function outcomes. Hematoxylin and eosin staining, Masson trichrome staining and Melan A (marker of melanocyte) staining were used to evaluate palmar skin, plantar skin, groin skin and burn scars. Full-thickness plantar skin grafts were performed between 2008 and 2015 in 24 hand burn patients with digital flexion contracture. The average age at the time of surgery was 39.3 months and the average follow-up period was 5.5 years. The functional and cosmetic results were assessed. Plantar skin shared similar attributes with palmar skin histologically. Both plantar skin and palmar skin did not express melan A. All of the skin grafts survived well without hematoma, infection and necrosis. The grafts resembled the adjacent normal skin in regards to appearance and texture. The average TAM (total active movement) degree for the fingers was improved from 152.3° to 238.5°. The average VSS (Vancouver Scar Scale) score decreased dramatically from 10.4 to 1.1. Twenty one of twenty four patients (21/24, 87.5%) were very satisfied with function and appearance, and three in twenty four (3/24, 12.5%) were somewhat satisfied. This study indicates that full-thickness plantar skin grafts can achieve a satisfactory appearance and good function for hand burn child patients with digital flexion contractures.
Assuntos
Queimaduras , Contratura , Traumatismos da Mão , Transplante de Pele , Queimaduras/complicações , Queimaduras/cirurgia , Criança , Pré-Escolar , Contratura/etiologia , Contratura/cirurgia , Estética , Traumatismos da Mão/diagnóstico , Traumatismos da Mão/cirurgia , Humanos , LactenteRESUMO
PURPOSE: To investigate the efficacy of congenital syndactyly correction with flexion crease and web space reconstruction using a dorsal hourglass-shaped flap without skin graft. METHODS: We studied 116 syndactylies in 96 patients. Surgical strategy focused on flexion crease and web space reconstruction using an hourglass-shaped dorsal advancement flap. We assessed for flap necrosis, height and width of the webs according to the criterion of D'Arcangelo, and total active digital motion compared with the normal side. Scar formation was measured by the Vancouver Scar Scale score. We also administered a parent-based satisfactory questionnaire. RESULTS: Mean follow-up was 4.2 years. All syndactylies could be corrected without skin grafts. Dorsal flap plasty facilitated the reconstruction of commissure with a slope of 45° in an hourglass shape. Two cases encountered partial flap loss but healed without surgical intervention. There were no recurrences. According to the criterion of D'Arcangelo, the height and width of 98 webs were good, 16 webs were fair, and 2 webs were poor. Mean total active motion of the index, middle, ring, and little fingers of the affected side was 160, 158, 153, and 150, respectively. Mean Vancouver Scar Scale score was 1.4. After surgery, all parents were satisfied with the appearance and function of the separated fingers. CONCLUSIONS: Reconstruction of the flexion crease and web space simultaneously with an hourglass-shaped dorsal advancement flap can achieve good aesthetic and functional outcomes. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.
Assuntos
Dedos/anormalidades , Retalhos Cirúrgicos/transplante , Sindactilia/cirurgia , Criança , Pré-Escolar , Cicatriz/epidemiologia , Contratura/epidemiologia , Estética , Feminino , Seguimentos , Humanos , Lactente , Masculino , Pais/psicologia , Complicações Pós-Operatórias/epidemiologia , Estudos Retrospectivos , Inquéritos e Questionários , Resultado do TratamentoRESUMO
Nature abounds with examples of ultra-sensitive perception and agile body transformation for highly efficient predation as well as extraordinary adaptation to complex environments. Flytraps, as a representative example, could effectively detect the most minute physical stimulation of insects and respond instantly, inspiring numerous robotic designs and applications. However, current robotic flytraps face challenges in reproducing the ultra-sensitive insect-touch perception. In addition, fast and fully-covered capture of live insects with robotic flytraps remains elusive. Here we report a novel design of a robotic flytrap with an ultra-sensitive 'trichome' and bistable fast-response 'lobes'. Our results show that the 'trichome' of the proposed robotic flytrap could detect and respond to both the external stimulation of 0.45 mN and a tiny touch of a flying bee with a weight of 0.12 g. Besides, once the 'trichome' is triggered, the bistable 'lobes' could instantly close themselves in 0.2 s to form a fully-covered cage to trap the bees, and reopen to set them free after the tests. We introduce the design, modeling, optimization, and verification of the robotic flytrap, and envision broader applications of this technology in ultra-sensitive perception, fast-response grasping, and biomedical engineering studies.
Assuntos
Voo Animal , Robótica , Robótica/instrumentação , Robótica/métodos , Animais , Voo Animal/fisiologia , Tato/fisiologia , Desenho de Equipamento , Abelhas/fisiologia , Biomimética/métodosRESUMO
The threat of microplastics to marine animals and habitats is increasing, which may affect sea turtle nesting grounds. The Qilianyu Islands are the largest remaining green turtle (Chelonia mydas) nesting grounds in China. Despite being far from the mainland, microplastic pollution cannot be ignored. In this study, the level of microplastic pollution in surface sediments from three different zones, namely, the bottom, intertidal, and supratidal zone, was investigated on North Island, Qilianyu Islands. The results showed that the abundance of microplastics in the supratidal zone was significantly higher than that in the bottom zone and intertidal zone (r = 3.65, p = 0.011), with the highest average abundance of microplastics located on the southwest coast of North Island. In the bottom zone, only plastic blocks (88%) and fibers (12%) were found. The main types of microplastics in the intertidal and supratidal zones were plastic blocks (48%) and foam (42%), with polyethylene (PE) (40%) and polystyrene (PS) (34%) being the predominant components. These types and components of microplastics differed from those in the surrounding seawater, but corresponding types and components were found in the plastic debris on the beach. Meanwhile, it was also observed that there were multiple instances of fragmented plastic on the beach. Thus, we suggest that the microplastics on the beach in North Island were mainly derived from the fragmentation of microplastic debris, indicating secondary microplastics. It is recommended to further strengthen the regular cleaning of plastic debris on the beach, especially the removal of small plastic debris, in order to reduce the pollution from secondary microplastics generated by the fragmentation of beach plastic debris and to better protect China's most important sea turtle nesting site in the South China Sea.
RESUMO
In this work, a novel biofilm-based fermentation of Beauveria bassiana was employed to convert R-2- phenoxypropionic acid (R-PPA) to R-2-(4-hydroxyphenoxy) propionic acid (R-HPPA). The biofilm culture model of Beauveria bassiana produced a significantly higher R-HPPA titer than the traditional submerged fermentation method. Mannitol dosage, tryptone dosage, and initial pH were the factors that played a significant role in biofilm formation and R-HPPA synthesis. Under the optimal conditions, the maximum R-HPPA titer and productivity approached 22.2 g/L and 3.2 g/(L·d), respectively. A two-stage bioreactor combining agitation and static incubation was developed to further increase R-HPPA production. The process was optimized to achieve 100 % conversion of R-PPA, with a maximum R-HPPA titer of 50 g/L and productivity of 3.8 g/(L·d). This newly developed biofilm-based two-stage fermentation process provides a promising strategy for the industrial production of R-HPPA and related hydroxylated aromatic compounds.
Assuntos
Beauveria , Fermentação , Beauveria/química , Reatores Biológicos , PropionatosRESUMO
In this study, the accumulation rate of plastic litter was investigated by sampling quadrats placed on the North Island of Qilianyu, and the composition was analyzed and identified to determine its source. The results showed that the annual average accumulation rate of plastic litter on North Island was 0.64 ± 0.32 pieces·m-2·month-1, with a mass accumulation rate of 11.30 ± 7.73 g·m-2·month-1. The accumulation rate of plastic litter was mainly influenced by wind speed and direction, with higher accumulation rates occurring during the southwest monsoon season and tropical cyclones. ATR-FTIR analysis indicated that polyethylene (44 %) and polypropylene (41 %) were the most abundant types of polymers. This study reveals the current status of plastic litter pollution in green turtle nesting grounds on North Island in Qilianyu, which can be used as a reference for management strategies that mitigate plastic litter pollution.
Assuntos
Monitoramento Ambiental , Plásticos , Tartarugas , Animais , Plásticos/análise , China , Poluentes Químicos da Água/análise , Ilhas , Comportamento de NidaçãoRESUMO
Traditional tendon engineering using cell-loaded scaffold has limited application potential due to the need of autologous cells. We hypothesize that potent mechanical loading can efficiently induce in situ Achilles tendon regeneration in a rabbit model by using a cell-free porous composite scaffold. In this study, melt-spinning was used to fabricate PGA (polyglycolic acid) and PLA (polylactic acid) filament fibers as well as non-woven PGA fibers. The PLA/PGA (4:2) filament fibers were further braided into a hybrid yarnï¼which was knitted into a PLA/PGA tubular mesh with potent mechanical property for sustaining natural tendon strain. The results showed that a complete cross-section of Achilles tendon created a model of full mechanical loading on the bridging scaffold, which could efficiently induce in situ tendon regeneration by promoting host cell infiltration, matrix production and tissue remodeling. Histologically, mechanical loading assisted in forming parallel aligned collagen fibers and tenocytes in a fashion similar to those of native tendon. Transmission electron microscope further demonstrated that mechanical strain induced collagen fibril development by increasing fibril diameter and forming bipolar structure, which resulted in enhanced mechanical properties. Interestingly, the synergistic effect between mechanical loading and hyaluronic acid modification was also observed on the induced tenogenic differentiation of infiltrated host fibroblasts. In conclusion, potent mechanical loading is the key inductive microenvironment for in situ tendon regeneration for this polymer-based composite scaffold with proper matrix modification, which may serve as a universal scaffold product for tendon regeneration.
Assuntos
Tendão do Calcâneo , Poliésteres , Regeneração , Engenharia Tecidual , Alicerces Teciduais , Animais , Coelhos , Alicerces Teciduais/química , Engenharia Tecidual/métodos , Poliésteres/química , Tenócitos , Polímeros/química , Materiais Biocompatíveis/química , Estresse MecânicoRESUMO
Background: To elucidate clinical applications of detecting serum levels of H19 and CRP in predicting the severity of ulcerative colitis (UC). Methods: Two hundred UC patients were recruited, and classified to mild/moderate group and severe group according to the Truelove-Witts grading system. Serum levels of H19 and CRP in UC patients were detected by turbidimetric inhibition immuno assay and qRT-PCR. Differences in serum levels of H19 and CRP between mild/moderate group and severe group were analyzed. By plotting ROC curves, the diagnostic potentials of H19 and CRP in UC were evaluated. Kappa conformance test was conducted to validate the conformance of detecting serum levels of H19 and CRP to clinical diagnosis of UC. Results: Serum levels of H19 and CRP were higher in UC patients of severe group than those of mild/moderate group. Their levels were both positively correlated to the severity of UC. High sensitivity (83.3%) and specificity (80.0%), as well as the maximum Youden index (0.633) were obtained at the cut-off value for H19 level of 2.755, and AUC was 0.8835. Meanwhile, Kappa coefficient (k) was 0.760 at the cut-off value for H19 level of 2.755, showing a high conformance to clinical diagnosis of UC. In addition, acceptable sensitivity (68.49%) and high specificity (85.83%), as well as the maximum Youden index (0.543) were obtained at the cut-off value for CRP level of 6.390 mg/L, and AUC was 0.8018. k was 0.435, showing an acceptable conformance to clinical diagnosis of UC based on serum level of CRP. Conclusions: Serum levels of H19 and CRP increase with the deterioration of UC. Detecting their serum levels has a consistent result to clinical diagnosis of UC, with a superior performance of H19 than that of CRP.
RESUMO
The purpose of this study was to investigate the efficacy of surgery combined with triamcinolone acetonide injection in managing the difficult problem of keloid formation after syndactyly release. Twenty-two patients with keloid formation after syndactyly release were retrospectively reviewed. They were divided into a simple surgery group and a surgery plus injection group. Complications, web quality, scar score and satisfaction were assessed and compared. In the surgery plus injection group, three patients (3/13) experienced recurrence and ten webs were good, whereas in the simple surgery group, seven patients (7/9) experienced recurrence and five webs were poor. The mean Vancouver Scar Scale score was significantly lower (4.3 versus 7.8) and the mean Faces Questionnaire satisfaction score was higher (4.2 versus 2.6) in the surgery plus injection group. Combining surgical excision with early and repeated intralesional injection can achieve better results with low recurrence rate and side effects.Level of evidence: IV.
Assuntos
Queloide , Humanos , Queloide/cirurgia , Triancinolona Acetonida/uso terapêutico , Injeções Intralesionais , Transplante de Pele/efeitos adversos , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Background: Airway stent has been widely used in airway procedures. However, the metallic and silicone tubular stents are not customized designed for individual patients and cannot adapt to complicated obstruction structures. Other customized stents could not adapt to complex airway structures with easy and standardized manufacturing methods. Object: This study aimed to design a series of novel stents with different shapes which can adapt to various airway structures, such as the "Y" shape structure at the tracheal carina, and to propose a standardized fabrication method to manufacture these customized stents in the same way. Methods: We proposed a design strategy for the stents with different shapes and introduced a braiding method to prototype six types of single-tube-braided stents. Theoretical model was established to investigate the radial stiffness of the stents and deformation upon compression. We also characterized their mechanical properties by conducting compression tests and water tank tests. Finally, a series of benchtop experiments and ex vivo experiments were conducted to evaluate the functions of the stents. Results: The theoretical model predicted similar results to the experimental results, and the proposed stents could bear a compression force of 5.79N. The results of water tank tests showed the stent was still functioning even if suffering from continuous water pressure at body temperature for a period of 30 days. The phantoms and ex-vivo experiments demonstrated that the proposed stents adapt well to different airway structures. Conclusion: Our study offers a new perspective on the design of customized, adaptive, and easy-to-fabricate stents for airway stents which could meet the requirements of various airway illnesses.
RESUMO
PURPOSE: To present a surgical technique of combining the on-top plasty with modified Bilhaut-Cloquet procedure for reconstructing a rare type of complicated radial polydactyly and evaluate the outcomes. METHODS: Fourteen complicated radial polydactyly in 13 patients were corrected by combining the on-top plasty with modified Bilhaut-Cloquet procedure. Osteotomies were performed as required, and the acral part of the ulnar thumb was transposed onto the proximal part of the radial thumb. The distal parts of the two thumbs were isolated as neurovascular pedicled composite tissue flaps, including part of the distal phalanx and nail bed, and were attached together in an extra-articular way. The tendons were rebalanced, and the nail bed was reconstructed. Objective and subjective outcomes were assessed. RESULTS: The average follow-up time was 32.4 months (6-60 months). All reconstructed thumbs were rated as good in appearance and function. The mean Vancouver Scar Scale score was 1.3 (range 1-2) and the mean Wang-Gao score of the reconstructed thumbnail was 9.4 (range 8-11). The Tada score for the function of the reconstructed thumb was 5.5 (range 5-6). The main active range of motion (ROM) of the interphalangeal joint (IPJ) was 2.1-38.9°. All parents were satisfied with the outcomes. CONCLUSIONS: Because of the diverse manifestations of thumb polydactyly, individualized surgical treatment is recommended, and careful preoperative planning should be made with the principle of combining the best parts of the two thumbs. By combining an on-top plasty with modified Bilhaut-Cloquet procedure, a satisfactory result can be achieved for treating complicated radial polydactyly.
Assuntos
Procedimentos de Cirurgia Plástica , Polidactilia , Humanos , Polegar/cirurgia , Polidactilia/cirurgia , Retalhos Cirúrgicos/cirurgiaRESUMO
Recent achievements in the field of electronic skin (e-skin) have provided promising technology for service robots. However, the development of a bionic perception system that exhibits superior performance in terms of safety and interaction quality remains a challenge. Here, we demonstrate a biomimetic soft e-skin that is composed of an array of capacitors and air pouches. It is a single platform that shows dual-mode sensing capabilities of tactile sensing and proximity perception. We optimized the shape and area of the electrode via simulation of the approach of a robot to an object. Moreover, the compliance and temperature of the e-skin can be actively adjusted by tuning the pressure and heat of the air inside the pouches. The e-skin provided dual-mode sensing feedback and soft touch for humanoid service robots, for example, when a robot hugged a man, which illustrated the potential of this e-skin for applications in human-robot interactions.
Assuntos
Robótica , Dispositivos Eletrônicos Vestíveis , Masculino , Humanos , Tato , Simulação por Computador , EletrodosRESUMO
Objective: The objective of this study is to explore the effect of kartogenin (KGN-)-pretreated adipose-derived stem cell-derived exosomes (ADSC-EXOs) on the chondrogenic differentiation ability of ADSCs. Methods: Adipose-derived stem cells (ADSCs) were treated with different doses of KGN, and exosomes (EXOs) were extracted. EXOs were then identified using an electron microscope (EM), nanoparticle tracking analyzer, nanoparticle tracking analysis software, and exosomal protein markers. EXOs were labeled with the fluorescent dye PKH67 and their uptake by cells was evaluated. A cell counting kit-8 (CCK-8) assay, flow cytometry, clonogenic assay, and a cell scratch assay were used to detect the abilities of proliferation, apoptosis, clone formation, and migration of ADSCs, respectively. Subsequently, Alcian blue staining and toluidine blue staining were used to detect the chondrogenic differentiation ability of ADSCs in each group. Quantitative real-time polymerase chain reaction (qRT-PCR) and Western blot (WB) techniques were used to detect the expression of chondrogenic differentiation-related genes. Results: In this study, ADSCs and KGN-induced ADSC-EXOs were successfully extracted and isolated. EXOs and ADSCs coculturing results showed that KGN-induced ADSC-EXOs can significantly promote proliferation, clone formation, migration, and chondrogenic differentiation of ADSCs and inhibit apoptosis. In addition, KGN-induced ADSC-EXOs can increase the expression of chondrogenic-related genes in ADSCs (Aggrecan, Collagen III, Collagen II, and SOX9), and can significantly decrease the expression of chondrolysis-related genes (MMP-3, ADAMTS4, and ADAMTS5). Conclusion: KGN-induced ADSC-EXOs can enhance the chondrogenic differentiation ability of ADSCs by promoting cell proliferation and migration while inhibiting cell apoptosis. KGN treatment can also increase the expression of chondrogenic differentiation-related genes and decrease the expression of chondrolysis-related genes. These results provide a new approach to cartilage repair and regeneration.
Assuntos
Exossomos , Adipócitos , Anilidas , Colágeno/metabolismo , Humanos , Ácidos Ftálicos , Células-Tronco/metabolismoRESUMO
Cutaneous wound healing in diabetes is impaired and would develop into nonhealing ulcerations. However, the molecular mechanism underlying the wound-healing process remains largely obscure. Here, we found that cutaneous PDGFRα+ fibroblast-expressing lncRNA-H19 (lncH19) accelerates the wound-healing process via promoting dermal fibroblast proliferation and macrophage infiltration in injured skin. PDGFRα+ cell-derived lncH19, which is lower in contents in the wound-healing cutaneous tissue of patients and mice with type 2 diabetes, is required for wound healing through promoting proliferative capacity of dermis fibroblasts as well as macrophage recruitments. Mechanistically, lncH19 relieves the cell cycle arrest of fibroblasts and increases macrophage infiltration in injured tissues via inhibiting p53 activity and GDF15 releasement. Furthermore, exosomes derived from adipocyte progenitor cells efficiently restore the impaired diabetic wound healing via delivering lncH19 to injured tissue. Therefore, our study reveals a new role for lncRNA in regulating cutaneous tissue repair and provides a novel promising insight for developing clinical treatment of diabetes.