Real-time CO2 emissions estimation in Spain and application to the COVID-19 pandemic.

CO2 emissions are one of the major contributors to global warming. The variety of emission sources and the nature of CO2 hinders estimating its concentration in real time and therefore to adopt flexible policies that contribute to its control and, ultimately, to reduce its effects. Spain is not exempted from this challenge and CO2 emissions are published only at the end of the year and as an aggregated value for the whole country, without recognising the existing differences between the regions (the so-called, Autonomous Communities). The recent COVID-19 pandemic is a clear example of the need of accurate and fast estimation methods so that policies can be tailored to the current status and not to a past one. This paper provides a method to estimate monthly emissions of CO2 for each AACC in Spain based on data that are published monthly by the relevant administrations. The paper discusses the approximations needed in the development of the method, predicts the drop in emissions due to the reduced industrial activity during the pandemic in Spain and provides the estimation of future emissions under three recovery scenarios after the pandemic.

Comparative Analysis of Surface Roughness and Plastic Deformation of Reciprocating Instruments after Clinical Use.

This study assessed the surface topography and plastic deformation (PD) of new and used contemporary reciprocating instruments. Twenty-six WaveOne Gold (WOG) and EdgeOne Fire (EO) instruments were photographed under magnification. The instruments were randomly assigned to a control group of new instruments preserved for surface roughness analysis (n = 6 each), or to an experimental group to shape the root canal system of a single molar (n = 20 each), making a total of four groups (WOGnew, EOnew, WOGused, EOused). Used instruments were also photographed after instrumentation. The presence of fractures was registered. Preoperative and postoperative images were randomly ordered for evaluation. Two blinded calibrated examiners evaluated the presence of PD. Inter-observer agreement was calculated with the Kappa coefficient (K = 0.89). 3D profilometry was also used for the surface roughness analysis of six randomly selected instruments from the WOGused and EOused groups. Chi-square and two-way ANOVA tests were used to, respectively, compare PD and changes in surface roughness among the groups. No instruments fractured; however, a significantly greater percentage of EO instruments suffered plastic deformation than WOG instruments (p < 0.001), (OR = 11.09 (CI 95% 2.6-56.3)). The overall surface roughness was higher for most parameters in the EO instruments (p < 0.05). Single uses of EO instruments produced significantly higher chances of PD and increased surface roughness values compared to WOG.

The effect of seatbelt pre-tensioners and load limiters in the reduction of MAIS 2+, MAIS 3+, and fatal injuries in real-world frontal crashes.

Contemporary research has pointed out that while newer cars are contributing to the decrease of AIS2+ and AIS3+ injuries in several body regions, this effect is not shown for thoracic injuries like rib or sternal fractures. The objective of this study is to assess the effectiveness of advanced seat belt systems incorporating pre-tensioners and load limiters in the prevention of fatal, AIS2+ and AIS3+ injuries overall and then focus only on the head-face-neck and thoracic areas. Data from the NASS CDS database between 2000 and 2015 was augmented with specific vehicle information taken from NHTSA's NCAP tests to identify the characteristics of the seat belt of each vehicle involved in a collision. Multivariate logistic regressions were developed to assess the likelihood of injuries for belted front seat occupants in frontal impacts. The presence of pre-tensioners and load limiters with a low load limiter (<4.5 kN) was significantly associated with a decreased risk of fatal and AIS3+ in the whole body (OR = 0.31 (p < 0.05) and OR = 0.70 (p < 0.1)), while high load limiters were significant in the prevention of fatal injuries (OR = 0.42). These effects should be considered always in combination with the delta-v of the collision, as the interaction term between delta-v and advanced seat belt features was significant. In the crashes considered, the model predicted a higher risk of injury for women compared to men, controlling for other occupant and crash factors. Impacts with a slightly oblique component increased the risk of injury compared to pure frontal impacts. After controlling for the presence of pre-tensioners and load limiters, the vehicle model year variable was found to be insignificant in any of the regression models. This study shows that the real-world effectiveness of advanced seat belts still requires further analysis. Other effects like age or impact direction might be more influential in the injury outcome than these seat belt features.

Biomechanical Modelling for Tooth Survival Studies: Mechanical Properties, Loads and Boundary Conditions-A Narrative Review.

Recent biomechanical studies have focused on studying the response of teeth before and after different treatments under functional and parafunctional loads. These studies often involve experimental and/or finite element analysis (FEA). Current loading and boundary conditions may not entirely represent the real condition of the tooth in clinical situations. The importance of homogenizing both sample characterization and boundary conditions definition for future dental biomechanical studies is highlighted. The mechanical properties of dental structural tissues are presented, along with the effect of functional and parafunctional loads and other environmental and biological parameters that may influence tooth survival. A range of values for Young's modulus, Poisson ratio, compressive strength, threshold stress intensity factor and fracture toughness are provided for enamel and dentin; as well as Young's modulus and Poisson ratio for the PDL, trabecular and cortical bone. Angles, loading magnitude and frequency are provided for functional and parafunctional loads. The environmental and physiological conditions (age, gender, tooth, humidity, etc.), that may influence tooth survival are also discussed. Oversimplifications of biomechanical models could end up in results that divert from the natural behavior of teeth. Experimental validation models with close-to-reality boundary conditions should be developed to compare the validity of simplified models.

Comparison of Upper Neck Loading in Young Adult and Elderly Volunteers During Low Speed Frontal Impacts.

Cervical pain and injuries are a major health problem globally. Existing neck injury criteria are based on experimental studies that included sled tests performed with volunteers, post-mortem human surrogates and animals. However, none of these studies have addressed the differences between young adults and elderly volunteers to date. Thus, this work analyzed the estimated axial and shear forces, and the bending moment at the craniocervical junction of nine young volunteers (18-30 years old) and four elderly volunteers (>65 years old) in a low-speed frontal deceleration. Since the calculation of these loads required the use of the mass and moment of inertia of the volunteers' heads, this study proposed new methods to estimate the inertial properties of the head of the volunteers based on external measurements that reduced the error of previously published methods. The estimated mean peak axial force (Fz) was -164.38 ± 35.04 N in the young group and -170.62 ± 49.82 N in the elderly group. The average maximum shear force (Fx) was -224.42 ± 54.39 N and -232.41 ± 19.23 N in the young and elderly group, respectively. Last, the estimated peak bending moment (My) was 13.63 ± 1.09 Nm in the young group and 14.81 ± 1.36 Nm in the elderly group. The neck loads experienced by the elderly group were within the highest values in the present study. Nevertheless, for the group of volunteers included in this study, no substantial differences with age were observed.