Short-term effects of ambient nitrogen dioxide on medical emergency calls for epileptic seizures: A time-series study.

Short-term exposure to air pollution has previously been studied in relation to certain neurological disorders, but there is still a lack of convincing data linking air pollution to epileptic seizures. The study's goal was to investigate how exposure to ambient nitrogen dioxide (NO2) affected the number of patients seeking assistance at the Wuhan Emergency Medical Center due to epileptic seizures. We gathered data on medical emergency calls (MECs), daily ambient air pollution concentrations (SO2, NO2, PM2.5, PM10, CO, and O3), and meteorological variables in Wuhan, China, spanning from January 1, 2017, to November 30, 2019. To investigate the potential influence of ambient nitrogen dioxide on MECs for epileptic seizures, we carried out a time-series investigation using the general additive model (GAM). Additionally, analyses stratified by season, age, and gender were performed. A total of 8989 records of MECs for epileptic seizures were enrolled in our study during the period. Statistical analysis indicates that a rise of 10 µg/m3 in NO2 concentration is linked to a 0.17% increase in daily MECs for epileptic seizures (95% confidence interval [CI]: 0.02%, 0.32%). Furthermore, people aged 14-59 years were more susceptible(2.25%, P < 0.05). The short-term effects of NO2 exposure on daily MECs for epileptic seizures were stronger in warm seasons than in cool seasons (0.55% vs. -0.10%, P < 0.0001). Our findings suggests that short-term exposure to ambient NO2 was positively correlated with daily MECs for epileptic seizures in Wuhan, China. Additionally, we observed that these associations were stronger in patients aged above 14 but under 60 years and the warmer seasons (from April to September).

The casual relationship between autoimmune diseases and multiple myeloma: a Mendelian randomization study.

Observational studies showed possible associations between systemic lupus erythematosus and multiple myeloma. However, whether there is a casual relationship between different types of autoimmune diseases (type 1 diabetes mellitus, rheumatoid arthritis, systemic lupus erythematosus, psoriasis, multiple sclerosis, primary sclerosing cholangitis, primary biliary cirrhosis, and juvenile idiopathic arthritis) and multiple myeloma (MM) is not well known. We performed a two-sample Mendelian randomization (MR) study to estimate the casual relationship. Summary-level data of autoimmune diseases were gained from published genome-wide association studies while data of MM was obtained from UKBiobank. The Inverse-Variance Weighted (IVW) method was used as the primary analysis method to interpret the study results, with MR-Egger and weighted median as complementary methods of analysis. There is causal relationship between primary sclerosing cholangitis [OR = 1.00015, 95% CI 1.000048-1.000254, P = 0.004] and MM. Nevertheless, no similar causal relationship was found between the remaining seven autoimmune diseases and MM. Considering the important role of age at recruitment and body mass index (BMI) in MM, we excluded these relevant instrument variables, and similar results were obtained. The accuracy and robustness of these findings were confirmed by sensitivity tests. Overall, MR analysis suggests that genetic liability to primary sclerosing cholangitis could be causally related to the increasing risk of MM. This finding may serve as a guide for clinical attention to patients with autoimmune diseases and their early screening for MM.

Interaction of a non-axisymmetric artificial single spatula with rough surfaces.

Hair-like attachment structures are frequently used by animals to create stable contact with rough surfaces. Previous studies focused primarily on axisymmetric biomimetic models of artificial spatulas, such as those with a mushroom-shaped and cylinder-shaped geometry, in order to simulate the so-called gecko effect. Here, two geometric prototypes of artificial adhesive structures with non-axisymmetric properties were designed. The investigation of the prototype's interactions with rough surfaces was carried out using the finite element software ABAQUS. Under increasing vertical displacement, the effect of asperity size on the contact pressure evolution of the spatula was investigated. It has been demonstrated that the contact behaviour is greatly affected by the flexibility of the spatula, which is caused by its variable thickness. The thinner spatula shows a higher nominal contact area and attaches more strongly to various rough surfaces. Although a thicker spatula is more susceptible to the 'leverage' phenomenon, which occurs when excessively applied displacements prematurely reduce the nominal contact area, it obtains the ability to regulate attachment during unidirectional loading. Two non-axisymmetric prototypes provide different design concepts for the artificial adhesives. It is hoped that this study will provide fresh viewpoints and innovations that contribute to the development of biologically inspired adhesives.

Comparison of the effects of using feedback devices for training or simulated cardiopulmonary arrest.

BACKGROUND: High-quality chest compression is essential for successful cardiac arrest resuscitation. High-quality cardiopulmonary resuscitation (CPR) can effectively improve the survival rate of patients with cardiopulmonary arrest. However, bystanders untrained in cardiopulmonary resuscitation may provide inadequate chest compressions. Previous studies have shown that the use of feedback devices in training alone or in simulated cardiopulmonary arrest alone can improve cardiopulmonary resuscitation. This study aims to determine whether using an audiovisual feedback (AVF) device during CPR training or a simulated cardiopulmonary arrest (CA) scenario would be more effective in improving the quality of chest compressions (CC). METHODS: We use a prospective, randomized, 2 × 2 factorial design trial. A total of 160 participants from Wuhan University and senior clinical medicine undergraduates who had not participated in any CPR training before and had no actual CPR experience are recruited. Each participant is randomized to 1 of 4 permutations, including AVF device vs. no AVF device during CPR training and AVF device vs. no AVF device during simulated CA. Main outcomes and measures are the depth, the percentage of CCs with correct depth (5-6 cm), the rate of CCs, and the percentage of CCs with the correct rate (100-120 cpm). RESULTS: The use of the AVF device during simulated CA resulted in improved CC quality. In CA without AVF device, the average compression depth and the percentage of adequate depth with AVF device are 5.1 cm, 5.0 cm and 55.5%, 56.3%, respectively, which are higher than those without AVF device (4.5 cm, 4.7 cm and 32.8%, 33.6%). (p = 0.011, p = 0.000, both < 0.05).Compared with CA without AVF device, the average compression rate and the percentage of adequate rate with AVF device are 112.3 cpm, 111.2 cpm and 79.4%, 83.1%, respectively. The average compression rate and the percentage of adequate rate without using the AVF device are 112.4 cpm, 110.3 cpm and 71.5%, 68.5%, respectively. (p = 0.567 > 0.05, p = 0.017 < 0.05)Although the average compression rate in group D is slightly lower than that in group C, the percentage of suitable frequency with the feedback device is still higher than that without AVF device. CONCLUSION: Using a feedback device during simulated cardiopulmonary arrest is more effective in improving cardiopulmonary resuscitation than during training.

Wax Protrusions on Anti-Adhesive Plant Surfaces and Their Interactions with Insect Adhesive Pads: A Mechanical Interpretation.

Insect attachment devices enhance adhesion to complex-geometry substrates by increasing the real contact area. In nature, insects mainly interact with plant surfaces that are often covered by 3D wax structures. Here, we describe, discuss, and give a mechanical interpretation of plant waxes and the possible fracture mechanisms of these wax structures during their interactions with the adhesive pads of insects. It is argued that these plant surface microstructures significantly influence insect adhesion through reducing the contact area and contaminating the insect pads.

Awareness of palliative care and its influencing factors in community residents in Hangzhou / 预防医学

Objective@# To understand the awareness of palliative care and its influencing factors in community residents in Hangzhou,so as to provide basis for the development of palliative care service.@*Methods@#By convenient sampling method,the residents in the urban-rural junction of Xihu District were recruited. A self-designed questionnaire was used to investigate their awareness of palliative care. The logistic regression model was employed to analyze the influencing factors.@*Results @#A total of 519 questionnaires were recovered,with a response rate of 97.92%. There were 227 males and 292 females,accounting for 43.74% and 56.26%,respectively. There were 43,218 and 258 residents with more,basic and little understanding about palliative care, accounting for 8.29%,42.00% and 49.71%. The residents learned about palliative care mainly through television and radio,with 245 cases accounting for 47.21%;and they thought that the main reason for low awareness of palliative care was a lack of related knowledge,with 396 cases accounting for 76.30%. The results of multivariate logistic regression analysis showed that 50-59 years old（OR = 0.467,95% CI：0.285-0.767）,primary school education and below（OR = 2.248,95%CI：1.239-4.079）and experience of caring for dying patients（OR = 1.551,95% CI：1.094-2.199）were the influencing factors for the awareness of palliative care. @*Conclusion@#The residents in Hangzhou had relatively low awareness of palliative care,which were associated with age,education level and experience of caring for dying patients.

Studies on the formation and synthetic mechanism of related substance G in potassium clavulanate production

The objective of this study was to investigate the formation and synthetic mechanism of related substance G in potassium clavulanate production. The impurity in the potassium clavulanate final product, with a retention time of 13.5 min, was confirmed as related substance G by high performance liquid chromatography-mass spectrometry/mass spectrometry. Related substance G analysis during the production of clavulanic acid showed that this impurity could be synthesized during fermentation, and the amount increased with the fermentation time. Studies on its synthetic mechanism showed that L-tyrosine and succinic acid were the precursors for biosynthesis of related substance G in vivo. The reaction was deduced to be catalyzed by an enzyme. The enzyme was a type of extracellular enzyme present in the fermentation supernatant.

O objetivo deste estudo foi investigar a formação e o mecanismo sintético da substância G relacionada na produção de clavulanato de potássio. A impureza do produto final clavulanato de potássio, com tempo de retenção de 13,5 min, foi confirmada como substância G relacionada por cromatografia líquida de alta eficiência-espectrometria de massas/espectrometria de massas. A análise da substância G relacionada durante a produção do ácido clavulânico mostrou que essa impureza poderia ser sintetizada durante a fermentação e que a quantidade aumenta com o tempo de fermentação. Estudos do seu mecanismo sintético mostraram que a L-tirosina e o ácido succínico foram os precursores in vivo para a biossíntese da substância G relacionada. Deduziu-se que a reação foi catalisada por uma enzima. A enzima foi do tipo extracelular, presente no sobrenadante da fermentação.

Studies on the formation and forming mechanism of the related substance E in potassium clavulanate production by HPLC-MS/MS

The objective of this study was to investigate the formation and forming mechanism of the related substance E in potassium clavulanate production. The impurity with retention time of 11.1 min in potassium clavulanate final product was confirmed as the related substance E by high performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS).The related substance E analysis during the production of clavulanic acid showed that this impurity could be formed during both the fermentation and purification processes, especially in the later fermentation stage, filtration concentration and back-extraction procedure. Clavulanic acid was the precursor of the related substance E. Studies on its forming mechanism showed that the related substance E was formed by the combination of the imino group of one molecule of clavulanic acid with the carboxyl group of another molecule of clavulanic acid with the opening of β-lactam ring. Results of a multi-factor orthogonal test confirmed that the concentration of clavulanic acid was the dominant factor to accelerate the reaction, while the temperature was another contributing factor. The pH 5.0-6.5 had little impact on the generation of the related substance E.

O objetivo deste estudo foi investigar a formação da substância E e o respectivo mecanismo na produção de clavulanato de potássio. Confirmou-se a impureza com tempo de retenção de 11,1 min no produto final, clavulanato de potássio, como substância E, por meio de cromatografia líquida de alta eficiência, em conjunto com detecção por espectrometria de massas (CLAE-MS-MS). A análise da substância relacionada E durante a produção do ácido clavulânico mostrou que essa impureza pode ser formada tanto durante a fermentação quanto durante os processos de purificação, especialmente no estágio final de fermentação, filtração, concentração e procedimento de extração. O ácido clavulãnico foi o precursor da substância E. Estudos no mecanismo de sua formação mostraram que a substância E formou-se pela combinação do grupo imina da molécula do ácido clavulânico com o grupo carboxílico de outra molécula de ácido clavulânico, com a abertura do anel β-lactâmico. Resultados do teste ortogonal multifatorial confirmaram que a concentração do ácido clavulânico foi o fator dominante para acelerar a reação, enquanto a temperatura foi outro fator que contribuiu. O pH de 5,0 a 6,5 teve pouco impacto na geração da substância E.