Multifunctional Iron Selenate Sheath of Fe-Based Anode Achieving High-Rate Capacity-Durability Combination of Aqueous Hybrid Energy Storage Devices.

The introduction of battery-type cathode has been commonly considered a preferred approach to boost the energy density of aqueous hybrid energy storage devices (AHESDs) in alkalic systems, but AHESDs with both high energy density and power density are rare due to the great challenge in designing battery-type anode materials with high rate and durability comparable to capacitive-type carbon anodes. In this paper, a well-hydrated iron selenate (FeSeO) sheath is constructed around FeOOH nanorods by a facile electrochemical activation, demonstrating the unique multifunction in fasting charge diffusion, promoting the dissociation of H2O, and inhibiting the irreversible phase transition of FeOOH to inert γ-Fe2O3, which endow the hydrated sheath coated Fe-based anodes with an impressive rate capability and superior durability. Thanks to the comprehensive performance of this Fe-based anode, the assembled AHESD delivered a high energy density of 117 Wh kg-1 with the extraordinary durability of almost 100% capacity retention after 40 000 cycles. Even at an ultrahigh power density of 27 000 W kg-1, an impressive energy density of 65 Wh kg-1 can be achieved, which rivals previously reported energy-storage devices.

Nanorod In2O3@C Modified Separator with Improved Adsorption and Catalytic Conversion of Soluble Polysulfides for High-Performance Lithium-Sulfur Batteries.

The shuttle effect of soluble lithium polysulfides (LiPSs) poses a crucial challenge for commercializing lithium-sulfur batteries. The functionalization of the separator is an effective strategy for enhancing the cell lifespan through the capture and reuse of LiPSs. Herein, a novel In2O3 nanorod with an ultrathin carbon layer (In2O3@C) was coated on a polypropylene separator. The results demonstrate the adsorption and catalysis of In2O3 on polysulfides, effectively inhibiting the shuttle effect and improving the redox kinetics of LiPSs. Besides, the ultrathin carbon layer increases the reaction sites and accelerates the electrochemical reaction rate. The cell with the In2O3@C interlayer displays excellent reversibility and stability with a 0.029% capacity decay each cycle in 2000 cycles at 2C. In addition, the In2O3@C interlayer significantly improves the cell performance under high current (888.2 mA h g-1 at 2C and room temperature) and low temperature (1007.8 mA h g-1 at 0.1C and -20 °C) conditions.

Synergistic Effect of In2O3/NC-Co3O4 Interface on Enhancing the Redox Conversion of Polysulfides for High-Performance Li-S Cathode Materials at Low Temperatures.

Lithium-sulfur (Li-S) batteries are considered as a promising energy storage technology due to their high energy density; however, the shuttling effect and sluggish redox kinetics of lithium polysulfides (LiPSs) severely deteriorate the electrochemical performance of Li-S batteries. Herein, we report a novel configuration wherein In2O3 and Co3O4 are incorporated into N-doped porous carbon as a sulfur host material (In2O3@NC-Co3O4) using metal-organic framework-based materials to synergistically tune the catalytic abilities of different metal oxides for different reaction stages of LiPSs, achieving a rapid redox conversion of LiPSs. In particular, the introduction of N-doped carbon improved the electron transport of the materials. The polar interface of In2O3 and Co3O4 anchors both long- and short-chain LiPSs and catalyzes long-chain and short-chain LiPSs, respectively, even at low temperatures. Consequently, the Li-S battery with In2O3@NC-Co3O4 cathode materials delivered an excellent discharge capacity of 1042.4 mAh g-1 at 1 C and a high capacity retention of 85.1% after 500 cycles. Impressively, the In2O3@NC-Co3O4 cathode displays superior performances at high current density and low temperature due to the enhanced redox kinetics, delivering 756 mAh g-1 at 2 C (room temperature) and 755 mAh g-1 at 0.1 C (-20 °C).

Micro Area Interface Wetting Structure with Tailored Li+-Solvation and Fast Transport Properties in Composite Polymer Electrolytes for Enhanced Performance in Solid-State Lithium Batteries.

To satisfy the demand for high safety and energy density in energy storage devices, all-solid-state lithium metal batteries with solid polymer electrolytes (SPE) replacing traditional liquid electrolytes and separators have been proposed and are increasingly regarded as one of the most promising candidates as next-generation energy storage systems. In this study, poly(vinylidene fluoride)-hexafluoropropylene/lignosulfonic acid (PVDF-HFP/LSA) composite polymer electrolyte (CPE) membranes with a micro area interface wetting structure were successfully prepared by incorporating LSA into the PVDF-HFP polymer matrix. The enhanced interaction between the polar functional group in LSA and the C═O in N-methylpyrrolidone (NMP) hinders the evaporation of solvent NMP, thus creating a micro area wetting structure, which offers a flexible region for the chain segment movement and enlarging the area of the amorphous zone in PVDF-HFP. From the results of IR and Raman spectroscopy, it was found that the presence of LSA induced unique ion transport channels created by the massive aggregated ion pair (AGG) and contact ion pair (CIP) of ion cluster structures composed of Li+ and multiple TFSI- and, at the same time, effectively reduced the crystallinity of the polymer electrolyte, hence further contributing to the Li+ diffusion. As a result, at a rate of 2 C, the Li|CPE-15|LiFePO4 solid-state battery delivers an initial discharge-specific capacity of 134.9 mAh g-1 and maintains stability with a retention of 84% during 400 charge-discharge cycles while the Li|CPE-0|LiFePO4 battery fails after only a few cycles at the same rate.

Studies on Composite Solid Electrolytes with a Dual Selective Confinement Interface Structure of Anions for High-Performance Lithium Metal Batteries.

Solid-state lithium batteries (SSLBs) have attracted much attention due to their good thermal stability and high energy density. However, solid-state electrolytes with low conductivity and prominent interfacial issues have hindered the further development of SSLBs. In this research, inspired from a selective confinement structure of anions, a novel HMOF-DNSE composite solid electrolyte with a dual selective confinement interface structure is proposed based on the semi-interpenetrating structure generated by poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP), poly(di-n-butylmethylammonium) bis(trifluoromethanesulfonyl)imide (PDADMATFSI), and a metal-organic frameworks MOF derivative (HMOF) as a filler. The dual-network structure of PVDF-HFP/PDADMATFSI combined with HMOF formed a dual selective confinement interface structure to confine out the movement of large anions TFSI-, thereby enhancing the transfer ability of Li+. Subsequently, the addition of HMOF further improves the transfer of Li+ by binding up TFSI- through its crystal structure. The results show that HMOF-DNSE possesses a high room-temperature ionic conductivity (0.7 mS cm-1), a wide electrochemical window (up to 4.5 V), and a high Li+ transfer number (tLi+) (0.56). LiFePO4/HMOF-DNSE/Li cell shows an excellent capacity of 141.5 mAh g-1 at 1C rate under room temperature, with a high retention of 80.1% after 500 cycles. The material design strategy, which is based on selective confinement interface structures of anions, offers valuable insights into enhancing the electrochemical performance of solid-state lithium batteries.