RESUMO
Ultrathin two-dimensional nanosheets raise a rapidly increasing interest due to their unique dimensionality-dependent properties. Most of the two-dimensional materials are obtained by exfoliation of layered bulk materials or are grown on substrates by vapor deposition methods. To produce free-standing nanosheets, solution-based colloidal methods are emerging as promising routes. In this work, we demonstrate ultrathin CdSe nanosheets with controllable size, shape, and phase. The key of our approach is the use of halogenated alkanes as additives in a hot-injection synthesis. Increasing concentrations of bromoalkanes can tune the shape from sexangular to quadrangular to triangular and the phase from zinc blende to wurtzite. Geometry and crystal structure evolution of the nanosheets take place in the presence of halide ions, acting as cadmium complexing agents and as surface X-type ligands, according to mass spectrometry and X-ray photoelectron spectroscopies. Our experimental findings show that the degree of these changes depends on the molecular structure of the halogen alkanes and the type of halogen atom.
RESUMO
The dielectric nature of organic ligands capping semiconductor colloidal nanocrystals (NCs) makes them incompatible with optoelectronic applications. For this reason, these ligands are regularly substituted through ligand-exchange processes by shorter (even atomic) or inorganic ones. In this work, an alternative path is proposed to obtain inorganically coated NCs. Differently to regular ligand exchange processes, the method reported here produces core-shell NCs and the removal of the original organic shell in a single step. This procedure leads to the formation of connected NCs resembling 1D worm-like networks with improved optical properties and polar solubility, in comparison with the initial CdSe NCs. The nature of the inorganic shell has been elucidated by X-ray Absorption Near Edge Structure (XANES), Extended X-ray Absorption Fine Structure (EXAFS) and X-ray Photoelectron Spectroscopy (XPS). The 1D morphology along with the lack of long insulating organic ligands and the higher solubility in polar media turns these structures very attractive for their further integration into optoelectronic devices.
RESUMO
Monodisperse carbon spheres between 500 and 900 nm are hydrothermally synthesized from glucose on polystyrene seeds. Control over temperature, time, glucose concentration, and seed size yields hybrid spheres without aggregation and no additional spheres population. Pyrolysis transforms the hybrid into hollow carbon spheres preserving monodispersity. This approach provides a basis for functional carbon spheres applicable in photonics and energy storage.
RESUMO
Temperature changes in the vicinity of a single absorptive nanostructure caused by local heating have strong implications in technologies such as integrated electronics or biomedicine. Herein, the temperature changes in the vicinity of a single optically trapped spherical Au nanoparticle encapsulated in a thermo-responsive poly(N-isopropylacrylamide) shell (Au@pNIPAM) are studied in detail. Individual beads are trapped in a counter-propagating optical tweezers setup at various laser powers, which allows the overall particle size to be tuned through the phase transition of the thermo-responsive shell. The experimentally obtained sizes measured at different irradiation powers are compared with average size values obtained by dynamic light scattering (DLS) from an ensemble of beads at different temperatures. The size range and the tendency to shrink upon increasing the laser power in the optical trap or by increasing the temperature for DLS agree with reasonable accuracy for both approaches. Discrepancies are evaluated by means of simple models accounting for variations in the thermal conductivity of the polymer, the viscosity of the aqueous solution and the absorption cross section of the coated Au nanoparticle. These results show that these parameters must be taken into account when considering local laser heating experiments in aqueous solution at the nanoscale. Analysis of the stability of the Au@pNIPAM particles in the trap is also theoretically carried out for different particle sizes.
RESUMO
Plasmons are resonant excitations in metallic films and nanoparticles. For small enough static distances of metal nanoparticles, additional plasmon-coupled modes appear as a collective excitation between the nanoparticles. Here we show, by combining poly(N-isopropylacrylamide) micro- and nanospheres and Au nanoparticles, how to design a system that allows controllably and reversibly switching on and off, and tuning the plasmon-coupled mode.
Assuntos
Acrilamidas/química , Ouro/química , Nanopartículas Metálicas/química , Polímeros/química , Ressonância de Plasmônio de Superfície , Acrilamidas/síntese química , Resinas Acrílicas , Tamanho da Partícula , Polímeros/síntese química , Propriedades de SuperfícieRESUMO
Optical and hydrodynamic-size studies on single bare thermo-responsive microspheres, and microspheres covered either with Au nanoparticles, CdSe/CdS quantum dots, or a combination of both have been performed by optical tweezers. The photothermal heating of water in the focal region boosts the shrinkage of the microspheres, an effect that is intensified in the presence of Au nanoparticles. In contrast, bigger microspheres are measured when they are covered with quantum dots. Plasmon-exciton interactions are observable in the trap in the combined Au and quantum dots hybrid systems.
Assuntos
Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pinças Ópticas , Ressonância de Plasmônio de Superfície/métodos , Temperatura Alta , Teste de Materiais , Nanoestruturas/efeitos da radiação , Tamanho da PartículaRESUMO
Deliberate and local increase of the temperature within solid tumors represents an effective therapeutic approach. Thermal therapies embrace this concept leveraging the capability of some species to convert the absorbed energy into heat. To that end, magnetic hyperthermia (MHT) uses magnetic nanoparticles (MNPs) that can effectively dissipate the energy absorbed under alternating magnetic fields. However, MNPs fail to provide real-time thermal feedback with the risk of unwanted overheating and impeding on-the-fly adjustment of the therapeutic parameters. Localization of MNPs within a tissue in an accurate, rapid, and cost-effective way represents another challenge for increasing the efficacy of MHT. In this work, MNPs are combined with state-of-the-art infrared luminescent nanothermometers (LNTh; Ag2 S nanoparticles) in a nanocapsule that simultaneously overcomes these limitations. The novel optomagnetic nanocapsule acts as multimodal contrast agents for different imaging techniques (magnetic resonance, photoacoustic and near-infrared fluorescence imaging, optical and X-ray computed tomography). Most crucially, these nanocapsules provide accurate (0.2 °C resolution) and real-time subcutaneous thermal feedback during in vivo MHT, also enabling the attainment of thermal maps of the area of interest. These findings are a milestone on the road toward controlled magnetothermal therapies with minimal side effects.
Assuntos
Meios de Contraste/química , Nanopartículas Magnéticas de Óxido de Ferro/química , Nanocápsulas/química , Animais , Linhagem Celular Tumoral , Corantes Fluorescentes/química , Temperatura Alta , Humanos , Hipertermia Induzida , Raios Infravermelhos , Campos Magnéticos , Magnetismo , Camundongos , Imagem Óptica , Terapia Fototérmica , Compostos de Prata/químicaRESUMO
Laser tweezers afford quantum dot (QD) manipulation for use as localized emitters. Here, we demonstrate fluorescence by radiative energy transfer from optically trapped colloidal QDs (donors) to fluorescent dyes (acceptors). To this end, we synthesized silica-coated QDs of different compositions and triggered their luminescence by simultaneous trapping and two-photon excitation in a microfluidic chamber filled with dyes. This strategy produces a near-field light source with great spatial maneuverability, which can be exploited to scan nanostructures. In this regard, we demonstrate induced photoluminescence of dye-labeled cells via optically trapped silica-coated colloidal QDs placed at their vicinity. Allocating nanoscale donors at controlled distances from a cell is an attractive concept in fluorescence microscopy because it dramatically reduces the number of excited dyes, which improves resolution by preventing interferences from the whole sample, while prolonging dye luminescence lifetime due to the lower power absorbed from the QDs.
RESUMO
During the past decade, due to their large number of technological applications, a large number of research studies have been devoted to CdSe nanocrystal (NC) systems. Most of the studies of NC grown on substrates present in the literature correspond to a submonolayer coverage. However, interparticle interactions and, consequently, system morphology and its properties can change at higher coverage regime. We combine the X-ray diffraction technique at wide and small angle range with direct space AFM microscopy for the morphological characterization of samples in the monolayer vicinity. We conclude that the CdSe preserves its nanoparticle character and its pyramid shape. This nanoparticle character is also reflected in the CdSe Density Of States (DOS) measured by UPS. We have shown that the particle CdSe atoms are perfectly ordered. They form nanocrystals with a wurtzite structure, grown with an axial and lateral matching with the HOPG substrate lattice in a hexagonal arrangement up to the monolayer coverage, with a strong interaction with the substrate. Above the monolayer coverage this epitaxial match is looser, resulting in a 3D disorder growth.
RESUMO
Heterostructure devices consisting of graphene and colloidal quantum dots (QDs) have been remarkably successful as photodetectors and have opened the door to technological applications based on the combination of these low-dimensional materials. This work explores the photodetection properties of a heterostructure consisting of a graphene field effect transistor covered by a film of silica-encapsulated colloidal QDs. Defects at the surface of the silica shell trap optically excited charge carriers, which simultaneously enables photodetection via two mechanisms: photogating, resulting in a net p-doping of the device, and Coulombic scattering of charge carriers in the graphene, producing an overall decrease in the current magnitude.
RESUMO
Research on near-infrared (NIR) bioimaging has progressed very quickly in the past few years, as fluorescence imaging is reaching a credible implementation as a preclinical technique. The applications of NIR bioimaging in theranostics have contributed to its increasing impact. This has brought about the development of novel technologies and, simultaneously, of new contrast agents capable of acting as efficient NIR optical probes. Among these probes, Ag2S nanoparticles (NPs) have attracted increasing attention due to their temperature-sensitive NIR-II emission, which can be exploited for deep-tissue imaging and thermometry, and their heat delivery capabilities. This multifunctionality makes Ag2S NPs ideal candidates for theranostics. This review presents a critical analysis of the synthesis routes, properties and optical features of Ag2S NPs. We also discuss the latest and most remarkable achievements enabled by these NPs in preclinical imaging and theranostics, together with a critical assessment of their potential to face forthcoming challenges in biomedicine.
Assuntos
Nanomedicina , Nanopartículas/química , Compostos de Prata/química , Animais , Técnicas Biossensoriais/métodos , Humanos , Neoplasias/diagnóstico por imagem , Espectroscopia de Luz Próxima ao InfravermelhoRESUMO
Correction for 'Perspectives for Ag2S NIR-II nanoparticles in biomedicine: from imaging to multifunctionality' by Yingli Shen, et al., Nanoscale, 2019, DOI: 10.1039/c9nr05733a.
RESUMO
Syntheses of metal sulfide nanocrystals (NCs) by heat-up routes in the presence of thiols yield NC arrangements difficult to further functionalize and transfer to aqueous media. By means of different NMR techniques, and exemplified by Ag2S NCs, a metal-organic polymer formed during the synthesis acting as a ligand has been identified to be responsible for such aggregation. In this work, a new synthetic hot-injection strategy is presented to synthesize Ag2S NCs which are easily ligand exchangeable in water. Furthermore, the hot-injection route allows an extra NC treatment with Se to produce Ag2S/Ag2(S,Se) NCs with improved optical properties with respect to the Ag2S cores, and better resistance to oxidation, as demonstrated by X-ray absorption experiments.
RESUMO
Insights to the mechanism of CdSe nanoparticle attachment to carbon nanotubes following the hot injection method are discussed. It was observed that the presence of water improves the nanotube coverage while Cl containing media are responsible for the shape transformation of the nanoparticles and further attachment to the carbon lattice. The experiments also show that the mechanism taking place involves the right balance of several factors, namely, low passivated nanoparticle surface, particles with well-defined crystallographic facets, and interaction with an organics-free sp2 carbon lattice. Furthermore, this procedure can be extended to cover graphene by quantum dots.
RESUMO
Compositional changes taking place during the synthesis of alloyed CdSeZnS nanocrystals (NCs) allow shifting of the optical features to higher energy as the NCs grow. Under certain synthetic conditions, the effect of those changes on the surface/interface chemistry competes with and dominates over the conventional quantum confinement effect in growing NCs. These changes, identified by means of complementary advanced spectroscopic techniques such as XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy), are understood in the frame of an ion migration and exchange mechanism taking place during the synthesis. Control over the synthetic routes during NC growth represents an alternative tool to tune the optical properties of colloidal quantum dots, broadening the versatility of the wet chemical methods.
RESUMO
This work explores the assembly of large-area heterostructures comprised of a film of silica-encapsulated, semiconducting colloidal quantum dots, deposited via the Langmuir-Blodgett method, sandwiched between two graphene sheets. The luminescent, electrically insulating film served as a dielectric, with the top graphene sheet patterned into an electrode and successfully used as a top gate for an underlying graphene field-effect transistor. This heterostructure paves the way for developing novel hybrid optoelectronic devices through the integration of 2D and 0D materials.
RESUMO
SiO2 encapsulation of alloyed CdSeZnS nanocrystals (NCs) shows differences in terms of optical properties and luminescence quantum yield, depending on the surface composition, size, and ligand content. In this work, emphasis has been placed on the fine control required to obtain luminescent SiO2 encapsulated NCs by studying the role of oleic acid (OA), stearic acid (SA), and dodecanethiol (DDT) ligands on the alloyed NCs. While the use of anchored DDT molecules is essential to preserve the optical properties, intercalated OA and SA play a critical role for SiO2 nucleation, as stated by (1)H NMR (including DOSY and NOESY) spectroscopy. These results emphasize the importance of surface chemistry in NCs; it is crucial to control their reactivity, and therefore their impact, in different applications, from optics to biomedicine.
Assuntos
Ligas/química , Nanopartículas/química , Dióxido de Silício/química , Ligantes , Luminescência , Pontos Quânticos , SemicondutoresRESUMO
Halide ions cap and stabilize colloidal semiconductor nanocrystal (NC) surfaces allowing for NCs surface interactions that may improve the performance of NC thin film devices such as photo-detectors and/or solar cells. Current ways to introduce halide anions as ligands on surfaces of NCs produced by the hot injection method are based on post-synthetic treatments. In this work we explore the possibility to introduce Cl in the NC ligand shell in situ during the NCs synthesis. With this aim, the effect of 1,2-dichloroethane (DCE) in the synthesis of CdSe rod-like NCs produced under different Cd/Se precursor molar ratios has been studied. We report a double role of DCE depending on the Cd/Se precursor molar ratio (either under excess of cadmium or selenium precursor). According to mass spectrometry (ESI-TOF) and nuclear magnetic resonance ((1)H NMR), under excess of Se precursor (Se dissolved in trioctylphosphine, TOP) conditions at 265 °C ethane-1,2-diylbis(trioctylphosphonium)dichloride is released as a product of the reaction between DCE and TOP. According to XPS studies chlorine gets incorporated into the CdSe ligand shell, promoting re-shaping of rod-like NCs into pyramidal ones. In contrast, under excess Cd precursor (CdO) conditions, DCE reacts with the Cd complex releasing chlorine-containing non-active species which do not trigger NCs re-shaping. The amount of chlorine incorporated into the ligand shell can thus be controlled by properly tuning the Cd/Se precursor molar ratio.
RESUMO
The performance of devices based on semiconductor nanocrystals (NCs) improves both with stronger interface interactions among NCs and between NCs and solid electrode surfaces. The combination of X-ray photoelectron spectroscopy (XPS) and solid (31)P CP/MAS NMR (cross-polarization/magic angle spinning nuclear magnetic resonance) shows that the selective substitution of long organic chains by chlorine atomic ligands during the colloidal synthesis by the hot injection method promotes the adsorption of CdSe NCs to carbon sp(2) surfaces, leading to the formation of well-ordered NC monolayers on graphitic materials.
RESUMO
The attachment of semiconducting nanoparticles to carbon nanotubes is one of the most challenging subjects in nanotechnology. Successful high coverage attachment and control over the charge transfer mechanism and photo-current generation open a wide field of new applications such as highly effective solar cells and fibre-enhanced polymers. In this work we study the charge transfer in individual double-walled carbon nanotubes highly covered with uniform ZnO nanoparticles. The synthetic colloidal procedure was chosen to avoid long-chained ligands at the nanoparticle-nanotube interface. The resulting composite material was used as conductive channel in a field-effect transistor device and the electrical photo-response was analysed under various conditions. By means of the transfer characteristics we could elucidate the mechanism of charge transfer from non-covalently attached semiconducting nanoparticles to carbon nanotubes. The role of positive charges remaining on the nanoparticles is discussed in terms of a gating effect.