Association between dental diseases and oral hygiene care and the risk of vertebral fracture: a nationwide cohort study.

Periodontal disease and increased missing teeth were associated with incident vertebral fractures. In contrast, professional dental cleaning and frequent tooth brushing, was associated with a lower risk of vertebral fracture. Better oral hygiene care attenuated the risk associated with dental diseases. PURPOSE: To investigate the association between oral health and the risk of vertebral fractures. METHODS: We included 2,532,253 individuals aged ≥40 years who underwent the Korean National Health Insurance Service health examinations in 2008 and followed up until December 31, 2017. We performed multivariable Cox proportional hazard regression analyses to evaluate the association between dental diseases and oral hygiene care and the risk of vertebral fractures. RESULTS: Over the 9.3-year median follow-up, 1.46% (n = 36,857) experienced vertebral fractures. Individuals with dental diseases had a higher risk of vertebral fracture than those without (hazard ratio [HR] 1.04, 95% confidence interval [CI]: 1.02-1.07 for periodontal diseases; 1.02, 1.00-1.05 for dental caries; 1.12, 1.05-1.20 for ≥15 missing teeth). Good oral hygiene care was associated with a lower vertebral fracture risk (HR 0.89, 95% CI: 0.86-0.91 for ≥1 time/year [vs. <1 time/year] of professional dental cleaning; 0.90, 0.87-0.93 for ≥2 times/day [vs. 0-1 time/day] of toothbrushing). The combined dental diseases was significantly associated with an increased vertebral fracture risk, whereas combined oral hygiene care was associated with further risk reduction. Better oral hygiene care reduced vertebral fracture risk associated with dental diseases (all P <0.001). CONCLUSION: Periodontal disease, dental caries, and an increased number of missing teeth were independently associated with higher risks for vertebral fractures. Conversely, improved oral hygiene care, such as personal dental cleaning and frequent tooth brushing, may modify vertebral fracture risks associated with dental disease.

Radiologic comparative analysis between saline and platelet-rich fibrin filling after hydraulic transcrestal sinus lifting without adjunctive bone graft: A randomized controlled trial.

OBJECTIVES: To evaluate implant survival rate, any complications, and changes in residual alveolar bone height (RABH) using saline or platelet-rich fibrin (PRF) filling after hydraulic transcrestal sinus lifting. METHODS: Dental implants were placed after hydraulic transcrestal sinus lifting and the filling of saline (20 patients) or PRF (20 patients). Outcome measurements were implant survival, any complications, and RABH changes. Cone-beam computed tomography (CBCT) scans were taken and compared preoperatively (T0), immediately postoperatively (T1), at 3 months (T2), 6 months (T3), and 12 months postoperatively (T4), respectively. RESULTS: In a total of 40 patients, 45 implants with a mean length of 10.4 ± 0.8 mm were placed in posterior maxilla of a mean RABH of 6.8 ± 1.1 mm. The increase in RABH peaked at T1, and continuous drooping of the sinus membrane was observed but stabilized at T3. Meanwhile, the gradual increase in the radiopacities was found below the lifted sinus membrane. The PRF filling induced the radiographic intrasinus bone gain of 2.6 ± 1.1 mm, which was significantly more than 1.7 ± 1.0 mm of saline filling at T4 (p < .05). All the implants were in function with no significant complications over the one-year follow-up period. CONCLUSIONS: In this randomized case-control study, the feasibility of hydraulic transcrestal sinus lifting without bone graft was confirmed and PRF might be a better filler to support the elevated sinus membrane. However, adjunctive bone grafting should still be indicated for cases requiring more than 2-3 mm of intrasinus bone gain.

Dental Hetero-Graft Materials with Nano Hydroxyapatite Surface Treatment.

We report the development of hydroxyapatite nanoparticle (HAp NP)-functionalized hetero-graft materials (HGMs) for dental applications. These HGMs were prepared by attaching platelet-, needle-, and sphere-shaped HAp NPs to the surface of xenograft materials through chemical conjugation. Although all three HAp NPs contributed to increase the surface area of bone graft material (BGM), the shape of the HAp NPs was a determining factor. Platelet HAp NPs were most effective, because they caused a 48.9% increase in BGM surface area whereas the influence of the spherical NP was only a 6.7% increase. This suggests that geometric factors regarding both the attached HAp NPs and graft material surface are essential in controlling the surface roughness of graft materials. Among the three HAp NPs, it was the platelet HAp NPs that helped to increase the efficacy of the BGM most significantly. Compared with BGM with no HAp NP attachment, HGM with platelet HAp NP ('platelet-HGM) treatment had ~46.1% higher cell attachment and proliferation rate. The MTT assay also showed that the HAp NP-treated hetero-graft materials had negligible cytotoxicity.

Treatment outcome and long-term stability of orthognathic surgery for facial asymmetry: A systematic review and meta-analysis.

Objective: : This systematic review aimed to provide a comparative analysis of the treatment outcomes, including hard and soft tissues, postoperative stability, temporomandibular disorders (TMD), and quality of life (QoL), in patients with facial asymmetry who underwent orthognathic surgery. Methods: : The primary objective was to address the question, "How do different factors related to surgery affect the outcomes and stability of orthognathic surgery in the correction of facial asymmetry?" A meta-analysis was conducted on the outcome parameters, such as skeletal, dental, and soft tissue symmetry, TMD, QoL, and relapse, using the Hartung-Knapp-Sidik-Jonkman method for random-effects models. Subgroup analyses were conducted considering surgery-related factors such as surgical techniques (one-jaw vs. two-jaw), use of the surgery-first approach, utilization of computer simulation, and analytical methods employed to evaluate asymmetry (2D vs. 3D). Results: : Forty-nine articles met the inclusion criteria. The meta-analysis demonstrated a significant improvement in the symmetry of hard and soft tissues. The subgroup analysis indicated that the treatment outcomes showed significant improvement, regardless of the factors related to surgery. Changes in TMD signs and symptoms varied according to the surgical technique used. Quality of life improved in the facial, oral, and social domains. Skeletal relapse was observed during the follow-up. Conclusions: : Our findings support the positive outcomes of orthognathic surgery in the treatment of facial asymmetry in terms of skeletal and soft tissue improvements, stability, relief of TMD symptoms, and enhancement of QoL. However, most of the included studies showed a low certainty of evidence and high heterogeneity.

Use of biosilica to improve loading and delivery of bone morphogenic protein 2.

The clinical utility of bone morphogenetic protein 2 (BMP2) is limited because of the poor attraction between BMP2 and carriers, resulting in low loading efficiency and initial burst release. Here, the high binding affinity of BMP2 to the biosilica surface was utilized to overcome this limitation. Atomic force microscopy revealed that BMP2 bound nearly 8- and 2-fold more strongly to biosilica-coated hydroxyapatite than to uncoated and plain silica-coated hydroxyapatite, respectively. To achieve controlled release, collagen was introduced between the silica layers on hydroxyapatite, which was optimized by adjusting the collagen concentration and number of layers. The optimal biosilica/collagen formulation induced sustained BMP2 release without compromising loading efficiency. BMP2 combined with the mentioned formulation led to an increase in osteogenesis, as compared to the combination of BMP2 with either biosilica-coated or non-coated hydroxyapatite in vitro. In rat calvarial defect models, the biosilica/collagen-coated hydroxyapatite with 1 µg BMP2 showed 26 % more bone regeneration than the same dose of BMP2-loaded hydroxyapatite and 10.6 % more than hydroxyapatite with 2.5-fold dose of BMP2. Using BMP2 affinity carriers coated with biosilica/collagen allows for more efficacious in situ loading and delivery of BMP2, making them suitable for the clinical application of growth factors through a soaking method.

Cell recognitive bioadhesive-based osteogenic barrier coating with localized delivery of bone morphogenetic protein-2 for accelerated guided bone regeneration.

Titanium mesh (Ti-mesh) for guided bone regeneration (GBR) approaches has been extensively considered to offer space maintenance in reconstructing the alveolar ridge within bone defects due to its superb mechanical properties and biocompatibility. However, soft tissue invasion across the pores of the Ti-mesh and intrinsically limited bioactivity of the titanium substrates often hinder satisfactory clinical outcomes in GBR treatments. Here, a cell recognitive osteogenic barrier coating was proposed using a bioengineered mussel adhesive protein (MAP) fused with Alg-Gly-Asp (RGD) peptide to achieve highly accelerated bone regeneration. The fusion bioadhesive MAP-RGD exhibited outstanding performance as a bioactive physical barrier that enabled effective cell occlusion and a prolonged, localized delivery of bone morphogenetic protein-2 (BMP-2). The MAP-RGD@BMP-2 coating promoted in vitro cellular behaviors and osteogenic commitments of mesenchymal stem cells (MSCs) via the synergistic crosstalk effects of the RGD peptide and BMP-2 in a surface-bound manner. The facile gluing of MAP-RGD@BMP-2 onto the Ti-mesh led to a distinguishable acceleration of the in vivo formation of new bone in terms of quantity and maturity in a rat calvarial defect. Hence, our protein-based cell recognitive osteogenic barrier coating can be an excellent therapeutic platform to improve the clinical predictability of GBR treatment.

BMP2-Mediated Silica Deposition: An Effective Strategy for Bone Mineralization.

The combined use of an osteogenic factor, such as bone morphogenetic protein 2 (BMP2), with a bone scaffold was quite functional for the reconstruction of bone defects. Although many studies using BMP2 have been done, there is still a need to develop an efficient way to apply BMP2 in the bone scaffold. Here, we reported an interesting fact that BMP2 has a silica deposition ability in the presence of silicic acid and proposed that such an ability of BMP2 can effectively immobilize and transport itself by a kind of coprecipitation of BMP2 with a silica matrix. The presence of BMP2 in the resulting silica was proved by SEM and EDS and was visualized by FITC-labeled BMP2. The delivery efficacy of BMP2 of silica-entrapped BMP2 on osteoblast differentiation and mineralization using MC3T3 E1 preosteoblast cells was evaluated in vitro. The coprecipitated BMP2 with silica exhibited osteogenesis at a low concentration that was insufficient to give an osteoinductive signal as the free form. Expectedly, the silica-entrapped BMP2 exhibited thermal stability over free BMP2. When applied to bone graft substitution, e.g., hydroxyapatite granules (HA), silica-entrapped BMP 2 laden HA (BMP2@Si/HA) showed sustained BMP2 release, whereas free BMP2 adsorbed HA by a simple dipping method (BMP2/HA) displayed a burst release of BMP2 at an initial time. In the rat critical-size calvarial defect model, BMP2@Si/HA showed better bone regeneration than BMP2/HA by about 10%. The BMP2/silica hybrid deposited on a carrier surface via BMP2-mediated silica precipitation demonstrated an increase in the loading efficiency, a decrease in the burst release of BMP2, and an increase in bone regeneration. Taken together, the coprecipitated BMP2 with a silica matrix has the advantages of not only being able to immobilize BMP2 efficiently without compromising its function but also serving as a stable carrier for BMP2 delivery.

Association of Dental Diseases and Oral Hygiene Care With the Risk of Heart Failure in Patients With Type 2 Diabetes: A Nationwide Cohort Study.

Background To evaluate the association of dental diseases and oral hygiene care with incidence of heart failure (HF) among patients with type 2 diabetes. Methods and Results This study included 173 927 patients with type 2 diabetes aged ≥40 years, who underwent Korean National Health Insurance Service health examinations in 2008 and were followed up until the end of 2017. Hazard ratios (HRs) and 95% CIs for HF were estimated using multivariable Cox proportional hazards regression analysis. During a median follow-up of 9.3 years, 1.94% of participants developed HF. An increased number of missing teeth was associated with a higher risk of HF (P<0.001). HRs of HF increased among individuals with ≥15 missing teeth (HR, 1.37 [95% CI, 1.14-1.64]) compared with those without missing teeth. Decreased risk of HF was observed in individuals with ≥1 time/year of professional dental cleaning (HR, 0.93 [95% CI, 0.87-0.99]) and in those with ≥2 times/d of toothbrushing (HR, 0.90 [95% CI, 0.82-0.98]) compared with those without these practices. While combined presence of missing teeth and periodontal disease (P=0.004) or dental caries (P=0.007) increased HF risk, combined oral hygiene care was associated with further HF risk reduction (P=0.024). Better oral hygiene care was associated with decreased HF risk, even as the number of missing teeth increased (P<0.001). Conclusions Among patients with type 2 diabetes, dental diseases and oral hygiene care are important determinants of HF development. Dental disease management and good oral care may prevent HF in patients with type 2 diabetes.

Association between Dental Diseases and Oral Hygiene Care and the Risk of Dementia: A Retrospective Cohort Study.

OBJECTIVES: To investigate the associations of dental diseases and oral hygiene care with the risk of dementia. DESIGN: Retrospective longitudinal cohort study. SETTING AND PARTICIPANTS: We conducted a population-based study of individuals in the Korean National Health Insurance System. A total of 2,555,618 participants who underwent cardiovascular and dental screenings in 2008 were included. METHODS: Dental diseases including periodontal diseases, dental caries, and tooth loss were assessed by dentists. Information on oral hygiene care, including professional dental cleaning and the frequency of tooth brushing, was collected using a self-administered questionnaire. Study outcomes were all-cause dementia, Alzheimer's disease (AD), and vascular dementia (VaD). RESULTS: Periodontal diseases [adjusted hazard ratio (aHR) 1.07, 95% CI 1.04-1.09], dental caries (aHR 1.03, 95% CI 1.00-1.05), and 8-14 missing teeth (aHR 1.07, 95% CI 1.02-1.12) were associated with an increased risk of all-cause dementia. In contrast, either professional dental cleaning or frequent tooth brushing were associated with decreased risks of all-cause dementia (aHR 0.91, 95% CI 0.89-0.93 each; aHR 0.83, 95% CI 0.80-0.86 for both). The increased risks by dental diseases were reduced by oral hygiene care: periodontal diseases with professional dental cleaning (aHR 0.94, 95% CI 0.91-0.98) or tooth brushing ≥2 times/day (aHR 0.97, 95% CI 0.94-1.00) and 1 to 7 missing teeth with professional dental cleaning (aHR 0.94, 95% CI 0.89-0.98) or tooth brushing ≥2 times/day (aHR 0.92, 95% CI 0.89-0.95). Consistent results were noted for AD and VaD and in various subgroup analyses. CONCLUSION AND IMPLICATIONS: Periodontal disease, dental caries, and a high number of missing teeth were independently associated with a higher risk of dementia. Conversely, improved oral hygiene care, such as professional dental cleaning and frequent tooth brushing, may modify the risk of dementia associated with dental diseases.

The effect of loading time on marginal bone change of implants immediately placed after extraction: a retrospective study.

BACKGROUND: The purpose of this study is to compare and analyze the treatment outcomes between two groups which are both immediately placed implant cases, one is immediate loading, and the other is conventional loading group. METHODS: Medical records of the patients who underwent implant treatment which were immediately placed after tooth extraction were analyzed. Demographic data were collected and by using periapical or panoramic radiographic image, marginal bone level and distant crestal bone level were measured. Marginal bone change over time was analyzed and compared between immediate loading group and conventional loading group. RESULTS: A total of 71 patients, 112 immediately placed implants after tooth extraction were initially involved. Measuring was done with implants which had not failed (81). 10 implants were had failed and removed. The others were excluded because of follow-up loss, absence of radiographic image, etc. Demographic data were collected, and measured values were averaged at each follow-up and showed in linear graphs. CONCLUSIONS: In case of immediate implantation of dental implant after extraction, loading time could affect marginal bone level or biological width of the implant. Immediate loading group showed 0.92 mm (mean value) more bone loss compared to conventional loading group at bone-implant contact points 24 months after implantation. At distant crestal points, there was no noticeable difference in bone change pattern between two groups.

Modified high-submandibular appraoch for open reduction and internal fixation of condylar fracture: case series report.

Objectives: Recently a modified high-submandibular approach (HSMA) has been introduced for treatment of condylar fracture. This approach involves an incision line close to the mandibular angle and transmasseteric transection, leading to a low incidence of facial palsy and allowing good visualization of the condyle area, especially the condylar neck and subcondyle positions. This study reports several cases managed with this modified HSMA technique for treating condylar fractures. Materials and Methods: Six cases of condylar fractures treated with modified HSMA technique were reviewed. Results: Three unilateral subcondylar fracture, 1 bilateral subcondylar fracture, 1 unilateral condylar neck fracture, 1 unlateral simultaneous condylar neck and subcondylar fracture cases were reviewed. All the cases were successfully treated without any major complication. Conclusion: Reduction, fixation, and osteosynthesis of condylar fractures via the modified HSMA technique enabled effective and stable treatment outcomes. Therefore, the described approach can be used especially for subcondylar and condylar neck fractures with minimal complications.

Therapeutic effects of sialendoscopy for diagnosis and treatment of hyposalivation patients: a retrospective study.

BACKGROUND: Hyposalivation is disease with multiple symptoms. This disease is hard to be diagnosed and to be treated, and there are not enough clinical protocols to cure the disease. In this study, we propose our own treatment protocols which aim not only to cure the disease but also to care for the disease-related symptoms. METHODS: At the 1st visit, we collect patient-related information. This procedure includes an intraoral exam, patient history taking, VAS value and unstimulated whole saliva (UWS) measurement, and salivary buffer test. Following the interview and oral examination, objective results are obtained by radiological image, CT, and sialoscintigraphy. At the 2nd visit, we analyze radiographic images including neck CT and salivary scintigraphy. These images can allow accurate diagnosis and help the patients to better understand the current condition. Depending on the severity of symptoms and patient's discomfort, we try a surgical approach at the 3rd visit, sialendoscopy. RESULTS: With treatment, we can manage the discomfort of patients in daily life. The VAS value of hyposalivation patients dropped gradually with the trial of sialendoscopy. In the case of Sjogren's syndrome patients, the treatment efficacy has been decreased with low reactivity of treatment. The true meaning of this treatment is in not only curing the disease, but also caring for the disrupted patients. Overall, the amount of UWS increased with the progress after the procedure. Especially in the lower UWS at the 1st visit, there was a more significant increase after the procedure. CONCLUSION: Although many factors that cause hyposalivation have not been identified, the efficacy of sialendoscopy to relieve discomfort in hyposalivation patients has been observed. However, treatment was more difficult and complicated in the group of patients with systemic disease. This study will not only present a treatment protocol for hyposalivation patients, but also consider methods for diagnosing more precisely and improving treatment efficacy. Hyposalivation is a curable and manageable disease in some cases, so interpretation between the clinician and the patient is important.

A Randomized Controlled Trial of Guided Bone Regeneration for Peri-Implant Dehiscence Defects with Two Anorganic Bovine Bone Materials Covered by Titanium Meshes.

The aim of this study is to compare two low-temperature sintered anorganic bovine bone materials (ABBMs), Bio-Oss (Geistlich, Wolhusen, Switzerland) and A-Oss (Osstem, Seoul, Korea), for GBR in dehiscence defects. A single implant was placed simultaneously with GBR in the buccal or bucco-proximal osseous defect by double-layering of inner allograft and outer ABBM, covered by a preformed ultrafine titanium mesh and an absorbable collagen membrane. Grafted volume changes were evaluated by cone-beam computed tomography, taken preoperatively (T0), immediately after implant surgery (T1), after re-entry surgery (T2), and after delivery of the final restoration (T3). The density of the regenerated bone was assessed by measuring the probing depth on the buccal mid-center of the mesh after removing the mesh at T2. Postoperative sequelae were also recorded. Grafted volume shrinkage of 46.0% (0.78 ± 0.37 cc) and 40.8% (0.79 ± 0.33 cc) in the Bio-Oss group (8 patients) and A-Oss group (8 patients), respectively, was observed at T3 (p < 0.001). There were no significant differences in grafted volume changes according to time periods or bone density between the two groups. Despite postoperative mesh exposure (3 patients), premature removal of these exposed meshes and additional grafting was not necessary, and all implants were functional over the 1-year follow-up period. Both ABBMs with titanium meshes showed no significant difference in the quantity and density of the regenerated bone after GBR for peri-implant defects.

Biosilicated collagen/ß-tricalcium phosphate composites as a BMP-2-delivering bone-graft substitute for accelerated craniofacial bone regeneration.

BACKGROUND: Bioceramic ß-tricalcium phosphate (ß-TCP) is used as a bone-grafting material and a therapeutic drug carrier for treatment of bone defects in the oral and maxillofacial regions due to the osteoconductivity and biocompatibility. However, the low mechanical strength and limited osteoinductivity of ß-TCP agglomerate restrict bone regenerating performance in clinical settings. METHODS: Herein, a biomimetic composite is proposed as a bone morphogenetic protein-2 (BMP-2)-delivering bone graft substitute to achieve a robust bone grafting and augmented bone regeneration. RESULTS: The sequential processes of brown algae-inspired biosilicification and collagen coating on the surface of ß-TCP enable the effective incorporation of BMP-2 into the coating layer without losing its bioactivity. The sustained delivery of BMP-2 from the biosilicated collagen and ß-TCP composites promoted in vitro osteogenic behaviors of pre-osteoblasts and remarkedly accelerated in vivo bone regeneration within a rat calvarial bone defect. CONCLUSIONS: Our multicomposite bone substitutes can be practically applied to improve bone tissue growth in bone grafting applications with further expansion to general bone tissue engineering.

Biodegradable Metallic Glass for Stretchable Transient Electronics.

Biodegradable electronics are disposable green devices whose constituents decompose into harmless byproducts, leaving no residual waste and minimally invasive medical implants requiring no removal surgery. Stretchable and flexible form factors are essential in biointegrated electronic applications for conformal integration with soft and expandable skins, tissues, and organs. Here a fully biodegradable MgZnCa metallic glass (MG) film is proposed for intrinsically stretchable electrodes with a high yield limit exploiting the advantages of amorphous phases with no crystalline defects. The irregular dissolution behavior of this amorphous alloy regarding electrical conductivity and morphology is investigated in aqueous solutions with different ion species. The MgZnCa MG nanofilm shows high elastic strain (≈2.6% in the nano-tensile test) and offers enhanced stretchability (≈115% when combined with serpentine geometry). The fatigue resistance in repeatable stretching also improves owing to the wide range of the elastic strain limit. Electronic components including the capacitor, inductor, diode, and transistor using the MgZnCa MG electrode support its integrability to transient electronic devices. The biodegradable triboelectric nanogenerator of MgZnCa MG operates stably over 50 000 cycles and its fatigue resistant applications in mechanical energy harvesting are verified. In vitro cell toxicity and in vivo inflammation tests demonstrate the biocompatibility in biointegrated use.

Comparison of initial stability parameters and histomorphometric analysis of implants inserted into extraction sockets: human fresh cadaver study.

PURPOSE: To evaluate the initial stability parameters (insertion torque value [ITV], implant stability quotient [ISQ], and Periotest value [PTV]) of implants inserted just after tooth extraction in human fresh cadavers and to examine the relationship between initial stability parameters and bone-to-implant contact ratio (BICR). MATERIALS AND METHODS: This study was undertaken in three fresh human cadavers, which were divided into six groups. A total of 48 sites (four maxillary sites and four mandibular sites in each of the six groups) were selected for the experiment. Extractions were performed under minimal surgical trauma and each manufacturer's recommended formal surgical procedure was followed to place implants. Initial stability parameters (ITV, ISQ via two different instruments, PTV) were measured. Specimens were prepared to analyze histologic findings and BICR. RESULTS: A total of 44 implants were included in this study. Statistically significant correlations were found between ITV and ISQ1 (r = 0.555, P < .001), ITV and ISQ2 (r = 0.398, P < .007), ITV and PTV (r = -0.452, P < .002), ISQ1 and ISQ2 (r = 0.603, P < .001), ISQ1 and PTV (r = -0.576, P < .001), and ISQ2 and PTV (r = -0.423, P < .004). No statically significant correlations were found between BICR and the initial stability parameters. CONCLUSION: The initial stability parameters have statistically significant correlations to each other. However, the initial stability parameters do not seem to present a reliable parameter to predict the area of bone-to-implant contact.

Histologic evidence of a connective tissue attachment to laser microgrooved abutments: a canine study.

Previous research has demonstrated the effectiveness of laser-ablated microgrooves placed on implant collars to support direct connective tissue attachments to altered implant surfaces. Such a direct connective tissue attachment serves as a physiologic barrier to the apical migration of the junctional epithelium and prevents crestal bone resorption. The current prospective preclinical trial sought to evaluate bone and soft tissue healing patterns when laser-ablated microgrooves were placed on the abutment. A canine model was selected for comparison to previous investigations that examined the negative bone and soft tissue sequelae of the implant-abutment microgap. The results demonstrate significant improvement in peri-implant hard and soft tissue healing compared to traditional machined abutment surfaces.

Correlation between bone quality evaluated by cone-beam computerized tomography and implant primary stability.

PURPOSE: To examine the relationship between bone quality, as evaluated by cone-beam computerized tomography (CBCT), and implant primary stability, as measured by resonance frequency analysis (RFA). MATERIALS AND METHODS: A preliminary clinical study was conducted in which implant placements were scheduled for 20 patients. The CT scan was obtained after initial drilling, and implant stability was measured with the Osstell Mentor instrument before flap closure. With CBCT, CT numbers of surrounding bone were calculated and the thickness of compact bone was measured at the buccal, lingual, mesial, and distal surfaces of each implant. The correlations between CT numbers and implant stability quotients (ISQs) and between compact bone thickness and ISQs were tested with the Pearson correlation coefficient. RESULTS: Overall, 61 implants were examined in 20 patients. The statistics showed that the CT numbers and the thickness of compact bone had strong correlations to ISQs (P < .025). CONCLUSION: CT scanning was suggested to be effective for evaluating bone quality and predicting initial implant stability.

Preliminary study on the efficacy of xerostomia treatment with sialocentesis targeting thyroid disease patients given radioiodine therapy.

BACKGROUND: Radioiodine therapy has been widely used for thyroid disease patients, but hyposalivation and xerostomia may occur in 10~30% of patients. Sialocentesis is a procedure that removes inflammatory substances in the salivary duct and expands the duct for the secretion and delivery of saliva. In this study, thyroid disease patients treated with radioactive iodine were selected among the patients with xerostomia who visited the hospital, and the effect of sialocentesis was compared and analyzed. And then, comparison between the radioiodine therapy-experienced group and the non-radioiodine therapy-experienced group was conducted. RESULTS: In this study, we studied xerostomia patients who underwent radioiodine therapy due to thyroid diseases and who underwent sialocentesis at the Korea University Anam Hospital. Sialocentesis is conducted by one surgeon. The study also compares the clinical symptoms before and after the surgery. After the procedure, the discomfort due to xerostomia was reduced, and the symptom was improved effectively. CONCLUSIONS: The results of this study showed that sialocentesis has a clinical effect in the treatment of xerostomia, which is a side effect of radioiodine therapy. In addition, the possibility of further clinical application of sialocentesis in the future is found.

Sialolithotomy of the submandibular duct using sialendoscopy.

BACKGROUND: Conventionally, indirect radiography has been used to diagnose salivary gland diseases. However, with the development of sialendoscopy, diagnosis and treatment of salivary gland diseases have become more effective. Herein, we report a case of sialolithotomy treated with sialendoscopy and compare it with the existing methods through a literature review. CASE PRESENTATION: Two patients with a foreign body sensation under the tongue and dry mouth visited the Anam Hospital, Korea University. Radiographic examination revealed salivary stones inside the right Wharton duct, and the patients underwent sialolithotomy under local or general anaesthesia. The stones were totally removed, and there were no postoperative complications such as bleeding or pain. CONCLUSION: The development of sialendoscopy has enabled better definitive diagnosis of salivary gland diseases compared with the conventional methods; better treatment outcomes can be obtained when sialendoscopy is used in appropriate cases.