Clinical and histological wound healing patterns of collagen-based substitutes: An experimental randomized controlled trial in standardized palatal defects in humans.

AIM: To evaluate the progression of wound healing of standardized palatal defects in groups using three different collagen-based wound dressings and a control group, in terms of wound closure, pain perception and descriptive histology. MATERIALS AND METHODS: Twenty participants were enrolled in this experimental study, in whom four palatal defects were created. The defects (6 mm diameter, 3 mm depth) were randomly assigned to one of four treatment modalities: C (control), MG (Mucograft®), MD (mucoderm®) and FG (Fibro-Gide®). Photographs were taken, and pain assessment was performed before and after treatment and at 5, 7, 9, 12, 14 and 16 days after surgery. All participants wore a palatal splint for a duration of 16 days. RESULTS: All groups achieved complete wound closure at 14 days. The percentage of the remaining open wound on day 7 amounted to 49.3% (C; interquartile range [IQR]: 22.6), 70.1% (FG; IQR: 20.7), 56.8% (MD; IQR: 26.3) and 62.2% (MG; IQR: 34.4). Statistically significant differences were found between FG and C (p =.01) and between MD and FG (p =.04). None of the participants rated pain higher than 4 out of 10 during the entire study period. CONCLUSIONS: Collagen-based wound dressings provide coverage of open defects, albeit without acceleration of wound closure or reduction of pain. FG (which is not intended for open oral wounds) showed slower wound closure compared to C and MD.

Augmentation of keratinized tissue using autogenous soft-tissue grafts and collagen-based soft-tissue substitutes at teeth and dental implants: Histological findings in a pilot pre-clinical study.

AIM: To histomorphometrically assess three treatment modalities for gaining keratinized tissue (KT) at teeth and at dental implants. MATERIALS AND METHODS: In five dogs, the distal roots of the mandibular second, third and fourth premolars were extracted. Dental implants were placed at the distal root areas 2 months later. After another 2 months, KT augmentation was performed at both distal (implants) and at mesial root (teeth) areas in the presence (wKT groups) or absence (w/oKT groups) of a KT band at the mucosal/gingival level. Three treatment modalities were applied randomly: apically positioned flap only (APF), free gingival grafts (FGGs) and xenogeneic collagen matrices (XCMs). A combination of the above produced six groups. Two months later, tissue sections were harvested and analysed histomorphometrically. RESULTS: The median KT height and length were greatest at implants with FGG in both wKT (3.7 and 5.1 mm, respectively) and w/oKT groups (3.7 and 4.6 mm), and at teeth with FGG in wKT groups (3.7 and 6.1 mm) and with APF in the w/oKT groups (3.9 and 4.4 mm). The XCM and APF produced more favourable results at teeth than at implants. CONCLUSIONS: FGG was advantageous in gaining KT, especially at implants.

Effects of implant placement timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical canine model.

AIM: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model. MATERIALS AND METHODS: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively. RESULTS: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder. CONCLUSIONS: CTG generally led to greater tissue thickness than VCMX.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Clinical use of digital applications for diagnostic and treatment planning in prosthodontics: A scoping review.

AIM: This scoping review aimed to compile and evaluate clinical trials investigating digital applications in prosthetic diagnostics and treatment planning by assessing their clinical relevance and future potential. METHODS: Following the PCC-framework for scoping reviews and combining the source of analysis (Population/P: "prosthodontics"), the technique of interest (Concept/C: "digital application") and the field of interest (Context/C: "diagnostics"), a three-pronged search strategy was applied in the database PubMed and Web of Science. Clinical trials (≥10 study participants, English/German) were considered until 2023-03-09. Reporting adhered to the PRISMA-ScR statement. RESULTS: The search identified 520 titles, of which 18 full-texts met the inclusion criteria for data extraction. The trials involved a total of 14,457 study participants and were mapped for prosthetic subdisciplines: fixed (n = 9; 50%) and removable (n = 4; 22%) prosthodontics, reconstructive dentistry in general (n = 3; 17%), and temporo-mandibular joint disorders (n = 2; 11%). Data merging of medical format files, as DICOM+STL, was the dominant digital application (n = 7; 39%); and virtual treatment simulation using digital smile design or digital wax-up represented the most frequent prosthetic diagnostics (n = 6; 33%). CONCLUSION: This scoping review identified a relatively low number of clinical trials. The future potential of digital diagnostics appears to be mostly related to the subdiscipline of fixed prosthodontics, especially regarding virtual treatment simulation for communication with the patient and among dental professionals. Artificial intelligence emerged as a key technology in many of the identified studies. Further research in this area is needed to explore the capabilities of digital technologies in prosthetic diagnostics and treatment planning.

Clinical, radiographic and patient-reported outcomes of zirconia and titanium implants in the posterior zone after 1 year of loading-A randomized controlled trial.

OBJECTIVE: To assess the clinical, radiographic and patient-reported outcomes (PROMs) of posterior zirconia and titanium implants at 1 year of implant loading. MATERIALS AND METHODS: Forty-two patients with two adjacent missing teeth were enrolled in a randomized controlled trial with a within-subject controlled design. Each patient received one zirconia (Zr) and one titanium (Ti) implant, with the mesial and distal positions randomized. The implant restoration consisted of multiple layered zirconia, with the buccal aspect veneered. In group Zr, the restoration was intraorally cemented onto the one-piece Zr implant, whereas in group Ti, the restoration was extraorally cemented onto the titanium base abutment and intraorally screw-retained onto the Ti implant. Examinations were performed following restoration delivery at baseline (BL) and at 1 year. Measurements included clinical parameters, radiographic outcomes (MBL) and PROMs. RESULTS: Bleeding on probing showed an increase from BL to 1 year (34 ± 30% for Zr; 25 ± 21% for Ti). MBL remained stable with minimal changes from BL to 1 year, measuring 0.1 ± 0.4 mm (mean ± SD) for Zr and -0.1 ± 0.7 mm for Ti. Veneering fractures were the most frequent technical complication and amounted to 17.5% in group Zr and 5% in group Ti (p = .100). Patients preferred Zr implants for their soft tissue color, with a significant difference in perception between patients and clinicians (p < .017). CONCLUSION: The study showed that both Zr and Ti implants had similar clinical outcomes, despite a high prevalence of mucositis and a few technical complications. Both implant types demonstrated stable marginal bone levels and similar patient-reported outcome measures.

Effects of hard- and/or soft-tissue grafting with early implant placement: Histomorphometric outcomes of an exploratory study in canines.

OBJECTIVE: To histomorphometrically determine the effects of hard- and/or soft-tissue augmentation by applying the early implant placement protocol. MATERIALS AND METHODS: The distal roots of the maxillary second and third premolars were extracted in 10 mongrel dogs. After 1 month, early implant placement was performed in the distal roots, resulting in buccal dehiscence defects. Four treatments were then randomly applied: (1) guided bone regeneration (GBR), (2) connective tissue grafting (CTG), (3) simultaneous GBR and CTG (GBR + CTG) and (4) no further treatment (control). Healing abutments were connected to all implants to allow non-submerged healing. At 4 and 16 weeks, tissue sections were harvested and histomorphometric analyses were performed. RESULTS: Group GBR presented the largest total tissue thickness at 4 weeks, but underwent a greater remodelling compared with the other groups between 4 and 16 weeks. At 16 weeks, the overall tissue thickness was largest in group GBR + CTG. This group was also the most favourable in terms of the level of the margo mucosae and the presence of mineralized tissue at the coronal level. Group CTG demonstrated a stable tissue thickness over time, with a larger thickness at 16 weeks compared with group GBR. CONCLUSION: Simultaneous CTG and GBR resulted in the most-favourable tissue thickness when applying the early implant placement protocol.

A 7.5-year randomized controlled clinical study comparing cemented and screw-retained one-piece zirconia-based implant-supported single crowns.

OBJECTIVES: To compare marginal bone levels, biological, and technical outcomes of screw-retained versus cemented all-ceramic implant-supported zirconia-based single crowns after an observation period of 7.5 years. METHODS: Forty-four single implants in the esthetic zone in 44 patients (22 females, 22 males) were randomly assigned to two types of restorations: SR (screw-retained); veneered one-piece zirconia abutment and CR (cement-retained); veneered lithium disilicate crown intraorally cemented on a one-piece zirconia abutment. Patients were recalled annually up to 7.5 years and survival rates, biological, and technical parameters assessed. RESULTS: A total of 31 patients attended the 7.5-year follow-up visit (17 SR group, 14 CR group). The survival rate on the restorative level was 77.5% (74.0% CR, 81.0% SR, p = .6399). Median marginal bone loss (MBL) values yielded -0.073 mm (-0.305; 0.238) in the CR and -0.215 mm (-0.500; 0.555) in the SR group (intergroup p = .6194). Mean bleeding on probing (BoP) values were significantly in favor of group SR with 20 ± 17% compared to 40 ± 22% in group CR (p = .011). The overall biological complication rate amounted to 27.5% (42.1% CR, 14.3% SR, p = .0775), whereas the technical complication rate was 32.5% (42.1% CR, 23.8% SR, p = .314). In total, CR restorations showed significantly more complications (84.2% for CR, 38.1% for SR, p = .0041). CONCLUSION: One-piece zirconia-based single crowns on two-piece dental implants exhibited a high rate of technical and biological complications at 7.5 years of follow-up. Cemented restorations revealed significant higher rates of bleeding on probing and total complications compared to screw-retained restorations.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Early implant placement versus ridge preservation and delayed implant placement: Analysis of profilometric, clinician- and patient-reported outcomes from a two-centre RCT.

OBJECTIVES: To compare early implant placement (EP) to alveolar ridge preservation and delayed implant placement (ARP/DP) in terms of contour changes, along with clinician- and patient-reported outcome measures (PROMs) until the delivery of the implant-supported restoration. MATERIALS AND METHODS: Patients with a failing single tooth in the maxilla or mandible were recruited in two centres. After tooth extraction, patients were randomly assigned (1:1) to either EP or ARP/DP. At abutment connection and crown delivery, the buccal contour changes at 3 mm below the mucosal margin (primary outcome) along with clinician- (ease of treatment) and patient-reported outcomes were assessed using numeric rating scales and OHIP-14. RESULTS: A total of 46 patients were analysed. The mean buccal contour at abutment connection decreased by -1.2 ± 0.6 mm in group EP and -1.6 ± 0.8 mm in group ARP/DP (estimated mean difference; 0.45 [95%CI, -0.02; 0.94]; p = .061) with no significant differences between the groups. ARP/DP was consistently easier than EP across all stages of the surgery (estimated mean difference; 2.0 [95%CI, 1.3; 2.7] p < .001): during flap elevation (EP: 4.8 vs. ARP/DP: 1.6), implant placement (EP: 5.7 vs. ARP/DP: 2.2) and wound closure (EP: 3.4 vs. ARP/DP: 1.6). Both interventions improved quality of life but patients who underwent ARP/DP were significantly more satisfied at the time of crown delivery (ARP/DP: 9.6 vs. EP: 9.1, p = .02). CONCLUSIONS: EP and ARP/DP show no significant differences in buccal contour changes, aesthetics and patient-reported outcomes. However, ARP/DP is an easier procedure at all stages of the surgery compared to EP and could therefore be the preferred therapy for less experienced clinicians.

Does an untreated peri-implant dehiscence defect affect the progression of peri-implantitis?: A preclinical in vivo experimental study.

OBJECTIVE: To investigate the early impact of plaque accumulation in a buccal dehiscence defect on peri-implant marginal bone resorption. MATERIALS AND METHODS: In six male Mongrel dogs, four dental implants were placed in the posterior maxilla on both sides (two implants per side). Based on the group allocation, each implant was randomly assigned to one of the following four groups to decide whether buccal dehiscence defect was prepared and whether silk ligation was applied at 8 weeks post-implant placement for peri-implantitis induction: UC (no defect without ligation); UD (defect without ligation); LC (no defect with ligation); and LD (defect with ligation) groups. Eight weeks after disease induction, the outcomes from radiographic and histologic analyses were statistically analyzed (p < .05). RESULTS: Based on radiographs, the exposed area of implant threads was smallest in group UC (p < .0083). Based on histology, both the distances from the implant platform to the first bone-to-implant contact point and to the bone crest were significantly longer in the LD group (p < .0083). In the UD group, some spontaneous bone fill occurred from the base of the defect at 8 weeks after implant placement. The apical extension of inflammatory cell infiltrate was significantly more prominent in the LD and LC groups compared to the UC group (p < .0083). CONCLUSION: Plaque accumulated on the exposed implant surface had a negative impact on maintaining the peri-implant marginal bone level, especially when there was a dehiscence defect around the implant.

Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth-The impact of ceramic thickness, the material's translucency, and the cement color.

OBJECTIVES: To evaluate minimally invasive restorations' capacity to mask discolored teeth and explore the impact of ceramic thickness, translucency, and cement color. MATERIALS AND METHODS: Twenty-four assessment pairs of naturally colored and discolored bovine dentin samples were formed, using lithium disilicate specimens in six different thicknesses (0.3-0.8 mm), two different translucencies (high, low), and two cements (transparent, tooth-colored). Evaluators assessed the color differences in each assessment pair, and the threshold for detecting a color difference was determined using sequential testing and the Bonferroni-Holm method. RESULTS: A thickness of 0.6 mm effectively masked color differences using high translucent ceramic with transparent cement, detectable differences were still observed at 0.7/0.8 mm. A threshold thickness of 0.4 mm was seen using high translucent ceramic and tooth-colored cement, with color differences still discernible at 0.5 and 0.8 mm. A threshold thickness of 0.4 mm was detected using low translucent ceramic and transparent cement, while detectable differences persisted at 0.5, 0.7, and 0.8 mm. A 0.5 mm threshold thickness was observed when using low translucent ceramic and tooth-colored cement, and no detectable color differences were detected beyond this thickness. CONCLUSIONS: Masking can be achieved with a thickness of 0.4-0.5 mm using a low translucent material and tooth-colored cement. CLINICAL SIGNIFICANCE: Understanding the impact of ceramic thickness, translucency, and cement color can aid clinicians in making informed decisions for achieving the best esthetic outcomes while preserving tooth structure. Effective masking can be accomplished with ceramic thicknesses starting at 0.4 mm, especially when employing a low translucent material and tooth-colored cement. However, clinicians should be aware that discolorations may still be detectable in certain scenarios when using minimally invasive lithium disilicate restorations.

Soft Tissue Contours at Pontic Sites With or Without Soft Tissue Grafting-A 15-Year Follow-Up of a Controlled Clinical Study.

OBJECTIVES: To report on soft tissue contour changes at pontic sites with or without soft tissue grafting over an observation period of 15 years. METHODS: Fourteen patients received a fixed dental prosthesis (FDP) in the posterior zone in a controlled clinical study and were available at the 15-year follow-up. Eight patients received a subepithelial connective tissue graft in the pontic area (test) while six received the FDP without soft tissue grafting (control). Impressions were taken after FDP cementation and at 15 years. Casts were digitized and a profilometric analysis was performed (mean distance) and the pontic height (PH) and ridge width (RW) were analyzed at the mid-buccal area. A descriptive analysis and Wilcoxon-Mann-Whitney test was performed (level of significance: 5%). RESULTS: Profilometric changes (mean distance) from baseline to 15 years amounted to -0.68 mm (test) and to -0.33 mm (control) (p = 0.208), 95% CI for group difference (0.290; -0.750). PH measured -0.47 mm (test) and 0.0 mm (control) (p = 0.079) and RW amounted to -1.05 mm (test) and -0.38 mm (control) (p = 0.138). CONCLUSION: Remodeling of the soft tissue contour at pontic sites of FDPs was evident in both groups, but slightly more accentuated following soft tissue grafting. CLINICAL SIGNIFICANCE: This study is the first to report on soft tissue changes at pontic sites over more than 10 years. It investigates whether tissue contour changes with and without soft tissue grafting before the insertion of FDPs. Remodeling of the soft tissue contour at pontic sites was observed over 15 years, with more pronounced changes when soft tissues were augmented with SCTGs before FDP insertion. The volume loss at the augmented site must be considered in relation to the overall tissue changes over long periods. Connective tissue grafts reliably improve shape and esthetics around the pontic unit. Further long-term studies with more patients are needed to evaluate the initial gains and long-term performance of these augmentations.

Use of optical see-through head-mounted devices in dentistry - a scoping review.

AIM: The aim of this scoping review was to identify the scientific evidence related to the utilization of Optical See- Through Head-Mounted Display (OST-HMD) in dentistry, and to determine future research needs. METHODS: The research question was formulated using the "Population" (P), "Concept" (Cpt), and "Context" (Cxt) framework for scoping reviews. Existing literature was designated as P, OST-HMD as Cpt, and Dentistry as Cxt. An electronic search was conducted in PubMed, Embase, Web of Science, and CENTRAL. Two authors independently screened titles and abstracts and performed the full-text analysis. RESULTS: The search identified 286 titles after removing duplicates. Nine studies, involving 138 participants and 1760 performed tests were included in this scoping review. Seven of the articles were preclinical studies, one was a survey, and one was a clinical trial. The included manuscripts covered various dental fields: three studies in orthodontics, two in oral surgery, two in conservative dentistry, one in general dentistry, and the remaining one in prosthodontics. Five articles focused on educational purposes. Two brands of OST-HMD were used: in eight studies HoloLens Microsoft was used, while Google Glass was utilized in one article. CONCLUSIONS: The overall number of included studies was low; therefore, the available data from this review cannot yet support an evidence-based recommendation for the clinical use of OST-HMDs. However, the existing preclinical data indicate a significant capacity for clinical and educational implementation. Further adoption of these devices will facilitate more reliable and objective quality and performance assessments, as well as more direct comparisons with conventional workflows. More clinical studies must be conducted to substantiate the potential benefits and reliability for patients and clinicians.

Minimal invasiveness in soft tissue augmentation at dental implants: A systematic review and meta-analysis of patient-reported outcome measures.

The aim of this study was to compare patient-reported outcome measures (PROMs) of soft tissue substitutes versus autogenous grafts for soft tissue augmentation procedures at implant sites. Comprehensive and systematic literature searches were performed until December 2021. A focused question was formulated based on the Population, Intervention, Comparison and Outcome criteria (PICO): In patients with dental implants undergoing soft tissue augmentation (P), do soft tissue substitutes (I) compared to autogenous soft tissue graft (SCTG [subepithelial connective tissue graft]) (C) limit the post-operative morbidity and other patient reported-outcomes measures (O). Randomized controlled clinical trials, prospective-, retrospective- and case-series studies were included. Meta-analyses were performed whenever possible and the results were expressed as weighted mean differences (WMD). A total of 29 clinical studies were included. For mucosal thickness gain, soft tissue substitutes significantly reduced the pain perception compared to SCTG (n = 4; WMD = 14.91 Visual Analog Scale [VAS] units; 95% confidence interval [CI] 6.42-23.40; P < .0006) based on a 0-100 VAS scale. Based on a 0-10 VAS scale, a borderline significance of pain reduction was found when soft tissue substitutes were applied (n = 4; WMD = 1.62 VAS units; 95% CI 0.01-3.23; P = .05). For keratinized tissue gain, soft tissue substitutes significantly reduced the pain perception after keratinized tissue augmentation compared to SCTG based on a 0-100 VAS scale (n = 2; WMD = 21.43 VAS units; 95% CI 12.58-30.28; P < .0001). Based on the 0-10 VAS scale, soft tissue substitutes significantly reduced the pain as compared to SCTG (n = 4; WMD = 1.65 VAS units; 95% CI 0.66-2.64; P = .001). Regarding pain medication, soft tissue substitutes required less painkillers (n = 6; WMD = 1.56 tablets; 95% CI 1.22-1.91; P < .00001) after soft tissue augmentation. The surgery time was significantly reduced when soft tissue substitutes were used (n = 5; WMD = 10.9 minutes; 95% CI 4.60-17.19; P < .00001). There were no significant differences in satisfaction, aesthetics, and quality of life (OHIP-14) between soft tissue substitutes and autogenous grafts following soft tissue augmentation at implants sites. Soft tissue substitutes, compared to autogenous grafts, significantly improve PROMs following soft tissue augmentation at implant sites. Soft tissue substitutes can reduce pain perception, amounts of painkillers and surgery time while achieving similar levels of patient´s satisfaction as autogenous grafts without impairing the clinical outcomes. The current evidence indicates that they constitute a valid and reliable alternative to minimize the invasiveness in soft tissue augmentation procedures at implant sites.

Soft-tissue dimensional change following guided bone regeneration on peri-implant defects using soft-type block or particulate bone substitutes: 1-year outcomes of a randomized controlled clinical trial.

AIM: To compare the peri-implant soft-tissue dimensional changes following guided bone regeneration between particulate (particle group) and collagenated soft-block-type (block group) biphasic calcium phosphate (BCP). MATERIALS AND METHODS: This study investigated 35 subjects: 18 in the particle group and 17 in the block group. Cone-beam computed tomography obtained at 6 months post surgery and optical impressions taken periodically (before surgery, 6 months post surgery, and 1 year post surgery) were superimposed. The ridge contour changes over time and the peri-implant mucosal thicknesses were measured diagonally and horizontally, and analysed statistically. RESULTS: The increases in diagonal (1.12 ± 0.78 mm) and horizontal (2.79 ± 1.90 mm) ridge contour of the block group were significantly higher than those in the particle group during the first 6 months (p < .05); however, the contour hardly changed thereafter (diagonal: 0.07 ± 0.75 mm; horizontal: -0.34 ± 1.26 mm), resulting in the 1-year contour changes similar between the two groups. Regardless of the type of BCP, the ridge contour increased significantly over 1 year when the dehiscence defect had a contained configuration (p < .05). CONCLUSIONS: The increase in soft-tissue dimensions for 1 year was similar between the two groups. The mucosal contour increase was larger when the surgery was conducted in a more contained defect, and this was not influenced by the type of BCP.

Epidemiology of mid-buccal gingival recessions according to the 2018 Classification System in South America: Results from two population-based studies.

AIM: The aim of this investigation was to estimate the prevalence, severity and extent of mid-buccal gingival recessions (GRs; classified according to the 2018 Classification System) and to identify their risk indicators in the South American population. MATERIALS AND METHODS: Epidemiological data from two cross-sectional studies-performed on 1070 South American adolescents and 1456 Chilean adults-were obtained. All participants received a full-mouth periodontal examination by calibrated examiners. GR prevalence was defined as the presence of at least one mid-buccal GR ≥ 1 mm. GRs were also categorized into different recession types (RTs) according to the 2018 World Workshop Classification System. Analyses for RT risk indicators were also performed. All analyses were carried out at the participant level. RESULTS: The prevalence of mid-buccal GRs was 14.1% in South American adolescents and 90.9% in Chilean adults. In South American adolescents, the prevalence of RTs was 4.3% for RT1 GRs, 10.7% for RT2 GRs and 1.7% for RT3 GRs. In Chilean adults, the prevalence of RT1 GRs was 0.3%, while the prevalence of RT2 and RT3 GRs was 85.8% and 77.4%, respectively. Full-Mouth Bleeding Score (FMBS; <25%) was associated with the presence of RT1 GRs in adolescents. The risk indicators for RT2/RT3 GRs mainly overlapped with those for periodontitis. CONCLUSIONS: Mid-buccal GRs affected 14.1% of South American adolescents, whereas they affected most of the Chilean adult population (>90%). While RT1 GRs are more commonly observed in a non-representative cohort of South American adolescents (when compared to Chilean adults), the majority of Chilean adults exhibit RT2/RT3 GRs.

Relevant domains, core outcome sets and measurements for implant dentistry clinical trials: The Implant Dentistry Core Outcome Set and Measurement (ID-COSM) international consensus report.

AIM: Lack of consistently reported outcomes limits progress in evidence-based implant dentistry and quality of care. The objective of this initiative was to develop a core outcome set (COS) and measurements for implant dentistry clinical trials (ID-COSM). MATERIALS AND METHODS: This Core Outcome Measures in Effectiveness Trials (COMET)-registered international initiative comprised six steps over 24 months: (i) systematic reviews of outcomes reported in the last 10 years; (ii) international patient focus groups; (iii) a Delphi project with a broad range of stakeholders (care providers, clinical researchers, methodologists, patients and industry representatives); (iv) expert group discussions organizing the outcomes in domains using a theoretical framework and identifying the COSs; (v) identification of valid measurement systems to capture the different domains and (vi) final consensus and formal approval involving experts and patients. The methods were modified from the best practice approach following the Outcome Measures in Rheumatoid Arthritis Clinical Trial and COMET manuals. RESULTS: The systematic reviews and patient focus groups identified 754 (665 + 89, respectively) relevant outcome measures. After elimination of redundancies and duplicates, 111 were formally assessed in the Delphi project. By applying pre-specified filters, the Delphi process identified 22 essential outcomes. These were reduced to 13 after aggregating alternative assessments of the same features. The expert committee organized them into four core outcome areas: (i) pathophysiology, (ii) implant/prosthesis lifespan, (iii) life impact and (iv) access to care. In each area, core outcomes were identified to capture both the benefits and harms of therapy. Mandatory outcome domains included assessment of surgical morbidity and complications, peri-implant tissue health status, intervention-related adverse events, complication-free survival and overall patient satisfaction and comfort. Outcomes deemed mandatory in specific circumstances comprised function (mastication, speech, aesthetics and denture retention), quality of life, effort for treatment and maintenance and cost effectiveness. Specialized COSs were identified for bone and soft-tissue augmentation procedures. The validity of measurement instruments ranged from international consensus (peri-implant tissue health status) to early identification of important outcomes (patient-reported outcomes identified by the focus groups). CONCLUSIONS: The ID-COSM initiative reached a consensus on a core set of mandatory outcomes for clinical trials in implant dentistry and/or soft tissue/bone augmentation. Adoption in future protocols and reporting on the respective domain areas by currently ongoing trials will contribute to improving evidence-informed implant dentistry and quality of care.

The accuracy of dynamic computer assisted implant surgery in fully edentulous jaws: A retrospective case series.

OBJECTIVES: To evaluate the accuracy of implant placement using a dynamic navigation system in fully edentulous jaws and to analyze the influence of implant distribution on implant position accuracy. MATERIALS AND METHODS: Edentulous patients who received implant placement using a dynamic navigation system were included. Four to six mini screws were placed in the edentulous jaw under local anesthesia as fiducial markers. Then patients received CBCT scans. Virtual implant positions were designed in the planning software based on CBCT data. Under local anesthesia, implants were inserted under the guidance of the dynamic navigation system. CBCTs were taken following implant placement. The deviation between the actual and planned implant positions was measured by comparing the pre- and postsurgery CBCT. RESULTS: A total of 13 edentulous patients with 13 edentulous maxillae and 7 edentulous mandibles were included, and 108 implants were placed. The average linear deviations at the implant entry point and apex were 1.08 ± 0.52 mm and 1.15 ± 0.60 mm, respectively. The average angular deviation was 2.85 ± 1.20°. No significant difference was detected in linear and angular deviations between the maxillary and mandibular implants, neither between the anterior and posterior implants. CONCLUSIONS: The dynamic navigation system provides high accuracy for implant placement in fully edentulous jaws, while the distribution of the implants showed little impact on implant position accuracy.

A double-blind randomized within-subject study to evaluate clinical applicability of four digital workflows for the fabrication of posterior single implant crown.

OBJECTIVE: To compare efficiency and clinical efficacy of posterior single implant crowns (PSIC) fabricated using four digital workflows. MATERIALS AND METHODS: Twenty-two patients with one missing first molar were included. Each patient received four screw-retained implant crowns fabricated through four different workflows including a fully digital workflow with immediate digital impression (Group i-IOS), a fully digital workflow with digital impression after implant osseointegration (Group d-IOS), a model-based hybrid workflow using immediate analogue impression (Group i-AI), and a model-based hybrid workflow with conventional analogue impression after implant osseointegration (Group d-AI). The crown delivery sequence was randomized and blinded. The efficiency for each workflow and clinical outcome of each crown were recorded. RESULTS: The average clinical working time in fully digital workflows (i-IOS 46.90 min, d-IOS 45.66 min) was significantly lower than that in the hybrid workflows (i-AI 54.59 min, d-AI 55.96 min; p < .001). Significantly more laboratory time was spent in hybrid workflows (i-AI 839.60 min, d-AI 811.73 min) as compared to fully digital workflows (i-IOS 606.25 min, d-IOS 607.83 min, p < .01). No significant differences in the chairside time at delivery were found. More crowns in Group i-AI (15%) needed additional laboratory interventions than in the other groups (p = .029). CONCLUSION: Digital impression and model-free fully digital workflow improved prosthetic efficiency in the fabrication of PSIC. With the limitation that the results were only applicable to the implant system used and the digital technologies applied, findings suggested that workflows integrating immediate impression with implant surgery procedure was clinically applicable for restoration of PSIC.