RESUMO
Electrochemically converting nitrate to ammonia is an essential and sustainable approach to restoring the globally perturbed nitrogen cycle. The rational design of catalysts for the nitrate reduction reaction (NO3 RR) based on a detailed understanding of the reaction mechanism is of high significance. We report a Cu2 O+Co3 O4 tandem catalyst which enhances the NH3 production rate by ≈2.7-fold compared to Co3 O4 and ≈7.5-fold compared with Cu2 O, respectively, however, most importantly, we precisely place single Cu2 O and Co3 O4 cube-shaped nanoparticles individually and together on carbon nanoelectrodes provide insight into the mechanism of the tandem catalysis. The structural and phase evolution of the individual Cu2 O+Co3 O4 nanocubes during NO3 RR is unveiled using identical location transmission electron microscopy. Combining single-entity electrochemistry with precise nano-placement sheds light on the dynamic transformation of single catalyst particles during tandem catalysis in a direct way.
RESUMO
Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO2 reduction, so as to maximize the rate of conversion to C-C-coupled products. Considering this, a novel Cu/C-Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO2 conversion to C2+ products compared to non-Ag-modified gas-diffusion electrodes. Gas chromatography and in-situ Raman measurements in a CO2 gas diffusion cell suggest the formation of top-bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC-H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO2 H and C-C-coupled products on the Cu/Ag bimetallic surface.
RESUMO
Discerning the influence of electrochemical reactions on the electrode microenvironment is an unavoidable topic for electrochemical reactions that involve the production of OH- and the consumption of water. That is particularly true for the carbon dioxide reduction reaction (CO2 RR), which together with the competing hydrogen evolution reaction (HER) exert changes in the local OH- and H2 O activity that in turn can possibly affect activity, stability, and selectivity of the CO2 RR. We determine the local OH- and H2 O activity in close proximity to a CO2 -converting Ag-based gas diffusion electrode (GDE) with product analysis using gas chromatography. A Pt nanosensor is positioned in the vicinity of the working GDE using shear-force-based scanning electrochemical microscopy (SECM) approach curves, which allows monitoring changes invoked by reactions proceeding within an otherwise inaccessible porous GDE by potentiodynamic measurements at the Pt-tip nanosensor. We show that high turnover HER/CO2 RR at a GDE lead to modulations of the alkalinity of the local electrolyte, that resemble a 16 m KOH solution, variations that are in turn linked to the reaction selectivity.
RESUMO
Electroreduction of CO2 to multi-carbon products has attracted considerable attention as it provides an avenue to high-density renewable energy storage. However, the selectivity and stability under high current densities are rarely reported. Herein, B-doped Cu (B-Cu) and B-Cu-Zn gas diffusion electrodes (GDE) were developed for highly selective and stable CO2 conversion to C2+ â products at industrially relevant current densities. The B-Cu GDE exhibited a high Faradaic efficiency of 79 % for C2+ â products formation at a current density of -200â mA cm-2 and a potential of -0.45â V vs. RHE. The long-term stability for C2+ formation was substantially improved by incorporating an optimal amount of Zn. Operando Raman spectra confirm the retained Cu+ species under CO2 reduction conditions and the lower overpotential for *OCO formation upon incorporation of Zn, which lead to the excellent conversion of CO2 to C2+ products on B-Cu-Zn GDEs.
RESUMO
Developing highly efficient and selective electrocatalysts for the CO2 reduction reaction to produce value-added chemicals has been intensively pursued. We report a series of Cux Oy Cz nanostructured electrocatalysts derived from a Cu-based MOF as porous self-sacrificial template. Blending catalysts with polytetrafluoroethylene (PTFE) on gas diffusion electrodes (GDEs) suppressed the competitive hydrogen evolution reaction. 25 to 50â wt % teflonized GDEs exhibited a Faradaic efficiency of ≈54 % for C2+ products at -80â mA cm-2 . The local OH- ions activity of PTFE-modified GDEs was assessed by means of closely positioning a Pt-nanoelectrode. A substantial increase in the OH- /H2 O activity ratio due to the locally generated OH- ions at increasing current densities was determined irrespective of the PTFE amount.
RESUMO
Well-defined assemblies of photosynthetic protein complexes are required for an optimal performance of semi-artificial energy conversion devices, capable of providing unidirectional electron flow when light-harvesting proteins are interfaced with electrode surfaces. We present mixed photosystemâ I (PSI) monolayers constituted of native cyanobacterial PSI trimers in combination with isolated PSI monomers from the same organism. The resulting compact arrangement ensures a high density of photoactive protein complexes per unit area, providing the basis to effectively minimize short-circuiting processes that typically limit the performance of PSI-based bioelectrodes. The PSI film is further interfaced with redox polymers for optimal electron transfer, enabling highly efficient light-induced photocurrent generation. Coupling of the photocathode with a [NiFeSe]-hydrogenase confirms the possibility to realize light-induced H2 evolution.
Assuntos
Técnicas Eletroquímicas/instrumentação , Complexo de Proteína do Fotossistema I/metabolismo , Anisotropia , Cianobactérias/metabolismo , Transporte de Elétrons , LuzRESUMO
Thin-film material libraries in the ternary and quaternary metal oxide systems Fe-V-O, Cu-V-O, and Cu-Fe-V-O were synthesized using combinatorial reactive co-sputtering with subsequent annealing in air. Their compositional, structural, and functional properties were assessed using high-throughput characterization methods. Prior to the investigation of the quaternary system Cu-Fe-V-O, the compositions (Fe61V39)Ox and (Cu52V48)Ox with promising photoactivity were identified from their ternary subsystems Fe-V-O and Cu-V-O, respectively. Two Cu-Fe-V-O material libraries with (Cu29-72Fe4-27V22-57)Ox and (Cu11-55Fe27-73V12-34)Ox composition spread were investigated. Seven mixed ternary and quaternary phase regions were identified: I (α-Cu3FeV6O26/FeVO4), II (Cu5V2O10/FeVO4/α-Cu3Fe4V6O26), III (Cu5V2O10), IV (Cu5V2O10/FeVO4, V (FeVO4/γ-Cu2V2O7/α-Cu3Fe4V6O26), VI (ß-Cu2V2O7/α-Cu3Fe4V6O26/FeVO4), and VII (ß-Cu3Fe4V6O26/FeVO4). In the investigated composition range, two photoactive regions, (Cu53Fe7V40)Ox and (Cu45Fe21V34)Ox, were identified, exhibiting 103 µA/cm2 and 108 µA/cm2 photocurrent density for the oxygen evolution reaction at 1.63 V vs reversible hydrogen electrode, respectively. The highest photoactive region (Cu45Fe21V34)Ox comprises the dominant α-Cu3Fe4V6O24 phase and minor FeVO4 phase. This photoactive region corresponds to having an indirect bandgap of 1.87 eV and a direct bandgap of 2.58 eV with an incident photon-to-current efficiency of 30% at a wavelength of 310 nm.
RESUMO
Surface-enhanced Raman spectroscopy is a powerful analytical tool and a strongly surface structure-dependent process. Importantly, it can be coupled with electrochemistry to simultaneously record vibrational spectroscopic information during electrocatalytic reactions. Highest Raman enhancements are obtained using precisely tuned nanostructures. The fabrication and evaluation of a high number of different nanostructures with slightly different properties is time-consuming. We present a strategy to systematically determine optimal nanostructure properties of electrochemically generated Ag void structures in order to find the void size providing highest signal enhancement for Raman spectroscopy. Ag-coated Si wafers were decorated with a monolayer of differently sized polymer nanospheres using a Langmuir-Blodgett approach. Subsequently, bipolar electrochemistry was used to electrodeposit a gradient of differently sized void structures. The gradient structures were locally evaluated using Raman spectroscopy of a surface-adsorbed Raman probe, and the surface regions exhibiting the highest Raman enhancement were characterized by means of scanning electron microscopy. High-throughput scanning droplet cell experiments were utilized to determine suitable conditions for the electrodeposition of the found highly active structure in a three-electrode electrochemical cell. This structure was subsequently employed as the working electrode in operando surface-enhanced Raman measurements to verify its viability as the signal amplifier and to spectroscopically rationalize the complex electrochemical reduction of carbon dioxide.
RESUMO
Electrochemical CO2 conversion is a key technology to promote the production of carbon-containing molecules, alongside reducing CO2 emissions leading to a closed carbon cycle economy. Over the past decade, the interest to develop selective and active electrochemical devices for electrochemical CO2 reduction emerged. However, most reports employ oxygen evolution reaction as an anodic half-cell reaction causing the system to suffer from sluggish kinetics with no production of value-added chemicals. Therefore, this study reports a conceptualized paired electrolyzer for simultaneous anodic and cathodic formate production at high currents. To achieve this, CO2 reduction was coupled with glycerol oxidation: a BiOBr-modified gas-diffusion cathode and a Nix B on Ni foam anode keep their selectivity for formate in the paired electrolyzer compared to the half-cell measurements. The paired reactor here reaches a combined Faradaic efficiency for formate of 141 % (45 % anode and 96 % cathode) at a current density of 200â mA cm-2 .
Assuntos
Dióxido de Carbono , Glicerol , Eletrodos , FormiatosRESUMO
Renewable electricity-powered nitrate (NO3 - ) reduction reaction (NO3 RR) offers a net-zero carbon route to the realization of high ammonia (NH3 ) productivity. However, this route suffers from low energy efficiency (EE, with a half-cell EE commonly <36%), since high overpotentials are required to overcome the weak NO3 - binding affinity and sluggish NO3 RR kinetics. To alleviate this, a rational catalyst design strategy that involves the linear assembly of sub-5 nm Cu/Co nanophases into sub-20 nm thick nanoribbons is suggested. The theoretical and experimental studies show that the Cu-Co nanoribbons, similar to enzymes, enable strong NO3 - adsorption and rapid tandem catalysis of NO3 - to NH3 , owing to their richly exposed binary phase boundaries and adjacent Cu-Co sites at sub-5 nm distance. In situ Raman spectroscopy further reveals that at low applied overpotentials, the Cu/Co nanophases are rapidly activated and subsequently stabilized by a specifically designed redox polymer that in situ scavenges intermediately formed highly oxidative nitrogen dioxide (NO2 ). As a result, a stable NO3 RR with a current density of ≈450 mA cm-2 is achieved, a Faradaic efficiency of >97% for the formation of NH3 , and an unprecedented half-cell EE of ≈42%.
RESUMO
Bi-based electrocatalysts have been widely investigated in the CO2 reduction reaction (CO2 RR) for the formation of formate. However, it remains a challenge to achieve high Faradaic efficiency (FE) and industrial current densities at low overpotentials for obtaining both high formate productivity and energy efficiency (EE). Herein, we report an Ag-Bi2 O3 hybrid nanofiber (Ag-Bi2 O3 ) for highly efficient electrochemical reduction of CO2 to formate. Ag-Bi2 O3 exhibits a formate FE of >90% for current densities from -10 to -250â mA â cm-2 and attains a yield rate of 11.7â mmol â s-1 â m-2 at -250â mA â cm-2 . Moreover, Ag-Bi2 O3 increased the EE (52.7%) by nearly 10% compared to a Bi2 O3 only counterpart. Structural characterization and in-situ Raman results suggest that the presence of Ag induced the conversion of Bi2 O3 from a monoclinic phase (α-Bi2 O3 ) to a metastable tetragonal phase (ß-Bi2 O3 ) and accelerated the formation of active metallic Bi at low overpotentials (at > -0.3â V), which together contributes to the highly efficient formate formation.
RESUMO
The number of active sites and their intrinsic activity are key factors in designing high-performance catalysts for the oxygen evolution reaction (OER). The synthesis, properties, and in-depth characterization of a homogeneous CoNiFeCu catalyst are reported, demonstrating that multimetal synergistic effects improve the OER kinetics and the intrinsic activity. In situ carbon corrosion and Cu leaching during the OER lead to an enhanced electrochemically active surface area, providing favorable conditions for improved electronic interaction between the constituent metals. After activation, the catalyst exhibits excellent activity with a low overpotential of 291.5 ± 0.5 mV at 10 mA cm-2 and a Tafel slope of 43.9 mV dec-1 . It shows superior stability compared to RuO2 in 1 m KOH, which is even preserved for 120 h at 500 mA cm-2 in 7 m KOH at 50 °C. Single particles of this CoNiFeCu after their placement on nanoelectrodes combined with identical location transmission electron microscopy before and after applying cyclic voltammetry are investigated. The improved catalytic performance is due to surface carbon corrosion and Cu leaching. The proposed catalyst design strategy combined with the unique single-nanoparticle technique contributes to the development and characterization of high-performance catalysts for electrochemical energy conversion.
RESUMO
Gas diffusion electrodes (GDEs) in CO2 reduction reaction (CO2RR) alleviate the mass transfer limitation of gaseous reagents, which is beneficial for reducing CO2 into valuable chemicals. GDEs offer higher current densities compared to electrodes immersed in the electrolyte. Disclosing the roles of different structural parameters in tuning the performance of the GDEs is essential to exert the potential of catalysts and to meet potential large-scale industrial applications of the CO2RR. A novel layer structure for the airbrush-type spray fabrication of GDEs was designed and optimised, comprising a carbon-based gas-diffusion layer, a PEEK fabric, a Ni mesh, a carbon-integrated catalyst layer, and a PTFE top layer. It was shown that adjusting the carbon material in the gas diffusion and the catalyst layer impacts the selectivity of the CO2RR due to the modulation of the pore network. This work disclosed a practical and scalable but also an easily transferable pathway for preparing GDEs and offered an idea of how to tune the significant parameters of GDEs for optimising their CO2RR performance.
RESUMO
The development of electrodes for efficient CO2 reduction while forming valuable compounds is critical. The use of enzymes as catalysts provides the advantage of high catalytic activity in combination with highly selective transformations. We describe the electrical wiring of a carbon monoxide dehydrogenase II from Carboxydothermus hydrogenoformans (ChCODH II) using a cobaltocene-based low-potential redox polymer for the selective reduction of CO2 to CO over gas diffusion electrodes. High catalytic current densities of up to -5.5 mA cm-2 are achieved, exceeding the performance of previously reported bioelectrodes for CO2 reduction based on either carbon monoxide dehydrogenases or formate dehydrogenases. The proposed bioelectrode reveals considerable stability with a half-life of more than 20 h of continuous operation. Product quantification using gas chromatography confirmed the selective transformation of CO2 into CO without any parasitic co-reactions at the applied potentials.
Assuntos
Monóxido de Carbono , Formiato Desidrogenases , Formiato Desidrogenases/química , Monóxido de Carbono/química , Dióxido de Carbono/química , Polímeros , Instalação Elétrica , Eletrodos , OxirreduçãoRESUMO
Electrocatalytic recycling of waste nitrate (NO3-) to valuable ammonia (NH3) at ambient conditions is a green and appealing alternative to the Haber-Bosch process. However, the reaction requires multi-step electron and proton transfer, making it a grand challenge to drive high-rate NH3 synthesis in an energy-efficient way. Herein, we present a design concept of tandem catalysts, which involves coupling intermediate phases of different transition metals, existing at low applied overpotentials, as cooperative active sites that enable cascade NO3--to-NH3 conversion, in turn avoiding the generally encountered scaling relations. We implement the concept by electrochemical transformation of Cu-Co binary sulfides into potential-dependent core-shell Cu/CuOx and Co/CoO phases. Electrochemical evaluation, kinetic studies, and in-situ Raman spectra reveal that the inner Cu/CuOx phases preferentially catalyze NO3- reduction to NO2-, which is rapidly reduced to NH3 at the nearby Co/CoO shell. This unique tandem catalyst system leads to a NO3--to-NH3 Faradaic efficiency of 93.3 ± 2.1% in a wide range of NO3- concentrations at pH 13, a high NH3 yield rate of 1.17 mmol cm-2 h-1 in 0.1 M NO3- at -0.175 V vs. RHE, and a half-cell energy efficiency of ~36%, surpassing most previous reports.
RESUMO
Cu-based catalysts have shown structural instability during the electrochemical CO2 reduction reaction (CO2RR). However, studies on monometallic Cu catalysts do not allow a nuanced differentiation between the contribution of the applied potential and the local concentration of CO as the reaction intermediate since both are inevitably linked. We first use bimetallic Ag-core/porous Cu-shell nanoparticles, which utilise nanoconfinement to generate high local CO concentrations at the Ag core at potentials at which the Cu shell is still inactive for the CO2RR. Using operando liquid cell TEM in combination with ex situ TEM, we can unequivocally confirm that the local CO concentration is the main source for the Cu instability. The local CO concentration is then modulated by replacing the Ag-core with a Pd-core which further confirms the role of high local CO concentrations. Product quantification during CO2RR reveals an inherent trade-off between stability, selectivity and activity in both systems.
RESUMO
Bimetallic silver-copper electrocatalysts are promising materials for electrochemical CO2 reduction reaction (CO2RR) to fuels and multi-carbon molecules. Here, we combine Ag core/porous Cu shell particles, which entrap reaction intermediates and thus facilitate the formation of C2+ products at low overpotentials, with gas diffusion electrodes (GDE). Mass transport plays a crucial role in the product selectivity in CO2RR. Conventional H-cell configurations suffer from limited CO2 diffusion to the reaction zone, thus decreasing the rate of the CO2RR. In contrast, in the case of GDE-based cells, the CO2RR takes place under enhanced mass transport conditions. Hence, investigation of the Ag core/porous Cu shell particles at the same potentials under different mass transport regimes reveals: (i) a variation of product distribution including C3 products, and (ii) a significant change in the local OH- activity under operation.
RESUMO
Combinatorial synthesis and high-throughput characterization of thin-film materials libraries enable to efficiently identify both photoelectrochemically active and inactive, as well as stable and instable systems for solar water splitting. This is shown on six ternary metal vanadate (M-V-O, M = Cu, Ag, W, Cr, Co, Fe) thin-film materials libraries, fabricated using combinatorial reactive magnetron cosputtering with subsequent annealing in air. By means of high-throughput characterization of these libraries correlations between composition, crystal structure, photocurrent density, and stability of the M-V-O systems in different electrolytes such as acidic, neutral and alkaline media were identified. The systems Cu-V-O and Ag-V-O are stable in alkaline electrolyte and exhibited photocurrents of 170 and 554 µA/cm2, respectively, whereas the systems W-V-O, Cr-V-O, and Co-V-O are not stable in alkaline electrolyte. However, the Cr-V-O and Co-V-O systems showed an enlarged photoactive region in acidic electrolyte, albeit with very low photocurrents (<10 µA/cm2). Complete data sets obtained from these different screening sets, including information on nonpromising systems, lays groundwork for their use to predict new systems for solar water splitting, for example, by machine learning.
Assuntos
Técnicas Eletroquímicas , Ensaios de Triagem em Larga Escala , Metais Pesados/química , Água/química , Processos FotoquímicosRESUMO
Mo-doped BiVO4 has emerged as a promising material for photoelectrodes for photoelectrochemical water splitting, however, still shows a limited efficiency for light-driven water oxidation. We present the influence of an oxygen-evolution catalyst composed of Ni, Fe, and Cr oxides on the activity of Mo:BiVO4 photoanodes. The photoanodes are prepared by spray-coating, enabling compositional and thickness gradients of the incorporated catalyst. Two different configurations are evaluated, namely with the catalyst embedded into the Mo:BiVO4 film or deposited on top of it. Both configurations provide a significantly different impact on the photoelectrocatalytic efficiency. Structural characterisation of the materials by means of SEM, TEM and XRD as well as the photoelectrocatalytic activity investigated by means of an optical scanning droplet cell and inâ situ detection of oxygen using scanning photoelectrochemical microscopy are presented.
RESUMO
The search for suitable materials for solar water splitting is addressed with combinatorial material science methods. Thin film Fe-V-O materials libraries were synthesized using combinatorial reactive magnetron cosputtering and subsequent annealing in air. The design of the libraries comprises a combination of large compositional gradients (from Fe10V90O x to Fe79V21O x) and thickness gradients (from 140 to 425 nm). These material libraries were investigated by high-throughput characterization techniques in terms of composition, structure, optical, and photoelectrochemical properties to establish correlations between composition, thickness, crystallinity, microstructure, and photocurrent density. Results show the presence of the Fe2V4O13 phase from â¼11 to 42 at. % Fe (toward low-Fe region) and the FeVO4 phase from â¼37 to 79 at. % Fe (toward Fe-rich region). However, as a third phase, Fe2O3 is present throughout the compositional gradients (from low-Fe to Fe-rich region). Material compositions with increasing crystallinity of the FeVO4 phase show enhanced photocurrent densities (â¼160 to 190 µA/cm2) throughout the thickness gradients whereas compositions with the Fe2V4O13 phase show comparatively low photocurrent densities (â¼28 µA/cm2). The band gap energies of Fe-V-O films were inferred from Tauc plots. The highest photocurrent density of â¼190 µA/cm2 was obtained for films with â¼54 to 66 at. % Fe for the FeVO4 phase with â¼2.04 eV for the indirect and â¼2.80 eV for the direct band gap energies.