Three-dimensional evaluation of dentopalatal changes after rapid maxillary expansion in growing children.

INTRODUCTION: In growing children with transverse malocclusion problems, various types of rapid maxillary expanders (RMEs) have been effectively used in skeletal and dental expansions. We evaluated 3-dimensional dentopalatal changes in growing children who underwent maxillary expansion using RMEs and bonded RMEs. METHODS: We investigated dentopalatal changes in 20 patients treated with bonded RMEs, 19 with RMEs, and 38 control patients. Dental plaster models before and after expansion were scanned 3-dimensionally and superimposed to evaluate transverse expansion, expansion ratio, angular expansion, and palatal expansion height ratio. RESULTS: Using bonded RMEs, similar anterior and posterior dental expansions were achieved with an efficiency of 69%-76% (expansion ratio), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 1.00) than in the anterior area (palatal expansion height ratio, 0.64). Using RMEs, a larger posterior dental expansion was achieved, with an efficiency of 106%-117% (expansion ratio), than anterior dental expansion (55%-60%), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 0.99) than anterior area (palatal expansion height ratio, 0.23). CONCLUSIONS: Dental expansions in the anterior and posterior areas were similar using bonded RMEs, whereas the posterior dental expansions were larger than those of the anterior area using RMEs. The entire palatal soft-tissue slope expanded in the posterior area, whereas the occlusal part expanded in the anterior area using RMEs and bonded RMEs.

Effect of locally delivered protein complex-loaded nanoparticles on bone remodelling of atrophic alveolar ridge in beagles.

OBJECTIVE: To investigate the effect of local injection of mineralized hybrid nanoparticles loading dentin matrix protein-1 (DMP-1) and matrix metalloproteinase-13 (MMP-13) complex (P-NPs) on the bone remodelling on atrophic alveolar ridges (AAR) ahead of orthodontic tooth movement (OTM). SETTINGS AND SAMPLE POPULATION: Four beagles were randomly allocated into Group C (OTM only) and Group NP (OTM with P-NPs injection). Experimental model of AAR was prepared in 8 mandibular quadrants after extraction of the third premolars (n = 4 per Group). MATERIALS AND METHODS: Reciprocal traction of the second and fourth premolars was performed towards AAR for 8 weeks. P-NPs were prepared by loading recombinant DMP-1 and MMP-13 complex into calcium carbonate (CaCO3 )-mineralized hybrid nanoparticles and injected at 0, 3 and 6 weeks. The rate of OTM and the bone remodelling characteristics were compared between Groups using fluorescent microscopic analysis and microstructural histomorphometric analysis. RESULTS: Group NP revealed higher bone volume fraction and higher trabecular ratio with lower bone mineral density than Group C on AAR area. Meanwhile, the root movement towards AAR was facilitated in Group NP representing more bodily movement than Group C. CONCLUSION: Non-invasive intervention of P-NPs injection suggested a clinical potential to facilitate translational movement into the AAR with sustaining woven bone-like microstructural environment.

Palatal temporary skeletal anchorage devices (TSADs): What to know and how to do?

OBJECTIVES: Since palatal temporary skeletal anchorage devices (TSADs) have become important tools for orthodontic treatment, this narrative review was aimed to provide an updated and integrated guidelines for the clinical application of palatal TSADs. SETTING AND SAMPLE POPULATION: A narrative review article including researches on palatal TSADs in orthodontics related to anatomy, success rate and clinical application. MATERIALS AND METHODS: The anatomical characteristics, success rate and its consideration factors and clinical application of palatal TSADs based on the direction of tooth movement were evaluated. RESULTS: To improve the stability of TSADs, hard tissue factors such as bone depth, cortical bone thickness, bone density and soft tissue thickness were evaluated. Anatomically risky structures, including the nasopalatine foramen, canal and the greater palatine foramen, nerve, vessel need to be identified before placement. The success rate of palatal TSADs was greater than that of the buccal inter-radicular space. Palatal TSADs have been used for various purposes because they can control tooth movement in all directions and, three-dimensionally; their applications include the retraction of anterior teeth, protraction of posterior teeth, distalization, intrusion, expansion and constriction. They can be applied directly or indirectly to the lingual arch or transpalatal arch. Design modifications using splinted 2 miniscrews have been suggested. CONCLUSION: Palatal TSADs allow clinicians to perform minimally invasive and easy placement with good stability by understanding the anatomical characteristics of the palatal region, and they show good control over 3-dimensional tooth movements in various clinical cases.

Automated Real-Time Evaluation of Condylar Movement in Relation to Three-Dimensional Craniofacial and Temporomandibular Morphometry in Patients with Facial Asymmetry.

The aim of this study was to investigate the correlation between craniofacial morphology, temporomandibular joint (TMJ) characteristics, and condylar functional movement in patients with facial asymmetry using an up-to-date automated real-time jaw-tracking system. A total of 30 patients with mandibular asymmetry and prognathism were included. Three-dimensional (3D) craniofacial and TMJ morphometric variables were analyzed in images captured using cone-beam computed tomography. Three-dimensional condylar movements were recorded during the opening, protrusion, and laterotrusion of the jaw and divided into those for deviated and non-deviated sides. Overall functional and morphometric variables were compared between the sides by a paired t-test. Pearson's correlation analysis and factor analysis were also performed. As a result, significant differences were found between the sides in morphometric and functional variables. The condylar path length was significantly longer and steeper on the deviated side during protrusion and lateral excursion. TMJ morphometric asymmetry, more so than the craniofacial morphologic asymmetry, seemed to be reflected in the functional asymmetry, representing different correlations between the sides, as supported by factor analysis. This study provides evidence explaining why the asymmetric condylar path remained unchanged even after orthognathic surgery for the correction of craniofacial asymmetry.

A New Designed Expander Supported by Spike Miniscrews With Enhanced Stability.

INTRODUCTION: This article represents a new design of expander-spike expander-to correct transverse maxillary deficiency. This new type appliance is easy to fabricate, more hygienic, and less soft-tissue irritation because of elimination of acrylic plate. In addition, because of the position of mini-implant, it can provide a relatively parallel alveolar expansion, compared with other types of expander. MATERIALS AND METHODS: The spike expander consists of 2 parts: 4 spike screws and an expansion screw. Four spike screws were placed on the palatal slope. After installation of the spike screws, based on the position of spike screw, the extension arms of expansion screw were bended on the cast model, and connected to the spike screws by adding resin. The expansion screw was turned once a day (0.25 mm/d), and the process was terminated at 6 weeks. RESULTS: The stability and design of the spike screw enable widening of maxilla easier. Compared with other expander, spike expander reduces the forces being placed directly on teeth, which can maximize skeletal expansion, minimize dental tipping, produce a relatively parallel expansion, and reduce soft-tissue irritation caused by acrylic pads. Furthermore, the teeth can be aligned and leveled simultaneously using the fixed appliance because teeth are free of contact by the expander. And the best point for spike expander is that it is simply fabricated and removed. CONCLUSIONS: The design of spike expander is combining spike screws and an expansion screw, which can provide a good and easy treatment method for transverse maxillary deficiency.

Effects of increased low-level diode laser irradiation time on extraction socket healing in rats.

In our previous studies, we confirmed that low-level laser therapy (LLLT) with a 980-nm gallium-aluminum-arsenide diode laser was beneficial for the healing of the alveolar bone in rats with systemic disease. However, many factors can affect the biostimulatory effects of LLLT. Thus, we attempted to investigate the effects of irradiation time on the healing of extraction sockets by evaluating the expressions of genes and proteins related to bone healing. The left and right first maxillary molars of 24 rats were extracted. Rats were randomly divided into four groups in which extraction sockets were irradiated for 0, 1, 2, or 5 min each day for 3 or 7 days. Specimens containing the sockets were examined using quantitative real-time reverse transcription polymerase chain reaction and western blotting. LLLT increased the expressions of all tested genes, Runx2, collagen type 1, osteocalcin, platelet-derived growth factor-B, and vascular endothelial growth factor, in a time-dependent manner. The highest levels of gene expressions were in the 5-min group after 7 days. Five minutes of irradiation caused prominent increases of the expression of all tested proteins after both 3 and 7 days. The expression level of each protein in group 4 was higher by almost twofold compared with group 1 after 7 days. Laser irradiation for 5 min caused the highest expressions of genes and proteins related to bone healing. In conclusion, LLLT had positive effects on the early stages of bone healing of extraction sockets in rats, which were irradiation time-dependent.

Uprighting mesially impacted mandibular molars with 2 miniscrews.

Mesially tilted or impacted mandibular molars cause occlusal disharmony and periodontal problems. For proper restoration of the occlusion and to prevent further periodontal damage, uprighting of tilted molars is the recommended treatment option. Although several orthodontic methods including miniscrews have been proposed, most of them have innate limitations and problems such as the possibility of unwanted tooth movement. In this case series, we introduce a new system that uses 2 miniscrews with slots that can accommodate rectangular orthodontic wires to 3 dimensionally control the tilted molar in 3 patients. We also discuss the advantages and possible disadvantages of this new system.

Effects of low-intensity laser therapy on periodontal tissue remodeling during relapse and retention of orthodontically moved teeth.

This study was designed to investigate the effects of low-intensity laser therapy (LILT) on periodontal ligament (PDL) remodeling during relapse and retention after the completion of orthodontic movement. The maxillary central incisors (n = 104) of the 52 rats were randomly divided into five groups according to the treatment modality: baseline control group without any intervention (n = 8); relapse group without retainer after tooth movement (n = 24); retention group with fixed retainer after tooth movement (n = 24); lased relapse group without retainer after tooth movement and LILT (n = 24); lased retention group with retainer after tooth movement and LILT (n = 24). LILT was daily performed using a gallium-aluminum-arsenide diode laser in a biostimulation mode: wavelength of 780 nm, continuous waves at 70 mW output power, a preset low intensity of 1.75 W/cm(2) in contact mode, resulting in energy dose of 5 J/cm(2) per irradiation for 3 s. The animals were euthanized on days 1, 3, and 7 after removal of the orthodontic appliance. Real-time RT-PCR was performed for quantitative analysis of matrix metalloproteinases mRNA expression. Immunoreactivities of collagen and tissue inhibitor of metalloproteinase were observed on the compression and tension sides. LILT significantly facilitated the expression of five tested MMP mRNAs in both relapse and retention groups. TIMP-1 immunoreactivity was inhibited by LILT in both groups, whereas Col-I immunoreactivity was increased by LILT only in the retention group. These results indicate that LILT would act differently on the stability after orthodontic treatment according to additional retainer wearing or not. LILT when combined with a retainer on the moved teeth may shorten the retention period by accelerating periodontal remodeling in the new tooth position, whereas, LILT on the moved teeth left without any retainer would rather increase the rate of relapse after treatment.

Ramal inclination in the frontal plane after bimaxillary orthognathic surgery in skeletal class III facial asymmetry : Spontaneous changes and stability.

PURPOSE: This study aimed to observe spontaneous changes of ramal inclination in the frontal plane (FRI) and its stability in skeletal class III asymmetry patients corrected with bimaxillary surgery. The correlation between FRI change and surgical skeletal change was also investigated. METHODS: Forty-nine patients with skeletal class III facial asymmetry who underwent orthognathic surgery with at least 1° change in FRI after surgery were analyzed. FRI and other factors were measured on frontal and lateral cephalograms before surgery (T1), after surgery (T2), and at follow-up after at least 6 months (T3). Correlation analysis was performed to determine pre- and postoperative factors associated with FRI change and stability. RESULTS: FRI increased significantly on the deviated side and decreased on the nondeviated side after surgery. The FRI changes remained stable during follow-up. No correlation between FRI changes and skeletal changes during surgery were found except between the change of FRI during follow-up (T3-T2) and mandibular setback amount (T2-T1), with a weak coefficient of 0.32. CONCLUSION: The FRI changes after bimaxillary orthognathic surgery in skeletal class III asymmetry reduced the FRI difference between the deviated and nondeviated side and remained stable for at least 6 months after surgery. No clinically significant correlation was found between measured skeletal changes during surgery and FRI changes.

Prognostic significance of S100A4 mRNA and protein expression in colorectal cancer.

BACKGROUND AND OBJECTIVES: The calcium-binding protein S100A4 promotes tumor progression and metastasis. We investigated the expression of S100A4 in colorectal cancer and its clinicopathologic significance in colorectal cancer. METHODS: A total of 526 colorectal cancer patients were examined for S100A4 protein by immunohistochemistry using tissue microarrays. S100A4 mRNA was subsequently investigated by in situ hybridization. RESULTS: S100A4 protein was expressed in various cell types including tumor cells, but S100A4 mRNA was only expressed in tumor cells. Cytoplasmic expression of S100A4 protein was seen in 127 (24.1%) of 526 tumors and significantly correlated with older age, depth of invasion, lymph node metastasis, and worse overall survival. Nuclear expression of S100A4 protein was observed in 136 (25.9%) tumors and significantly related to the depth of invasion, perineural invasion, and worse overall survival. However, there was no correlation between S100A4 mRNA expression and clinicopathological parameters. Upon multivariate analysis nuclear expression of S100A4 protein was found to be an independent prognostic factor of poor survival. CONCLUSIONS: Expression of S100A4 protein in colorectal cancers may indicate tumor progression and lymph node metastasis and can be useful for prediction of overall survival of patients with colorectal cancers.

Orthodontic miniplate with tube as an efficient tool for borderline cases.

An orthodontic miniplate tube device, the C-tube, was designed for use in patients for whom a conventional miniscrew is not suitable, such as those with narrow interradicular spaces, extended maxillary sinuses, dilacerated roots, or severe alveolar bone loss. After local anesthesia, 2 parallel horizontal incisions are made in the area of placement, and the periosteum is elevated. The C-tube is slipped under the mucosal flap and fixed with self-drilling miniscrews (diameter, 1.5 mm; length, 4 mm). Because the screws are short, there is adequate retention in the alveolar plate, and the clinician can avoid the increased morbidity of anchoring to the zygomatic buttress. This makes placement possible with superficial anesthesia. A small rolled tube at the head part can act as an orthodontic tube and accommodate archwires or as a hook to attach orthodontic elastics. However, in some patients with pneumatization or systemic diseases, such as diabetes mellitus, or in heavy smokers, cross-type C-tubes with longer miniscrews are recommend for better stability. This new type of orthodontic miniplate can be an effective alternative to conventional 1-component screws or miniplates in complex situations.

Control of maxillary dentition with 2 midpalatal orthodontic miniscrews.

The midpalatal area has no critical anatomic structures and has thick cortical bone. These conditions are favorable for miniscrew implantation. Also, there is no concern that damaging a dental root in this area would cause failure of the miniscrew. Although these advantages can decrease the failure rate of miniscrews, midpalatal miniscrews have not been as popular as interdental miniscrews. Because the midpalatal area is far from the teeth, the utility of midpalatal miniscrews has been considered to be limited. This article describes a new method for controlling the maxillary dentition with 2 midpalatal miniscrews.

Release of bisphenol A from resin composite used to bond orthodontic lingual retainers.

INTRODUCTION: In this study, we assessed the changes in bisphenol A (BPA) levels in saliva and urine after placing lingual bonded retainers. METHODS: Liquid chromatography/mass spectrometry was used to examine the BPA levels in the saliva and urine samples collected from 22 volunteers who received a lingual bonded retainer on their mandibular dentition. Samples were collected immediately before placement and 30 minutes, 1 day, 1 week, and 1 month after placement. The time elapsed after placement, type of resin composite (nanohybrid filled flowable resin or conventional hybrid resin), surface prophylaxis, age, and sex were evaluated for their effects on the BPA levels. RESULTS: The only significant high level of BPA was observed in the saliva collected just after placement of the lingual bonded retainer. Age and sex did not affect the BPA levels. Subjects in the flowable resin group had lower BPA levels than those in the conventional hybrid resin group; pumice prophylaxis decreased the level of BPA released from the conventional hybrid resin at the immediate time point. The salivary BPA level (maximum, 20.889 ng/mL) detected in the samples collected just after placement was far lower than the reference daily intake dose. CONCLUSIONS: Accordingly, the potential toxicity of BPA from placing lingual bonded retainer might be negligible. On the other hand, because the health-effective amount of BPA is controversial, BPA release should be minimized.

Effectiveness of 2D radiographs in detecting CBCT-based incidental findings in orthodontic patients.

Some craniofacial diseases or anatomical variations are found in radiographic images taken for other purposes. These incidental findings (IFs) can be detected in orthodontic patients, as various radiographs are required for orthodontic diagnosis. The radiographic data of 1020-orthodontic patients were interpreted to evaluate the rates of IFs in three-dimensional (3D) cone-beam-computed tomography (CBCT) with a large field of view (FOV) and investigate the effectiveness and accuracy of two-dimensional (2D) radiographs for detecting IFs compared to CBCT. Prevalence and accuracy in five areas was measured for sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV). The accuracies of various 2D-radiograph were compared through a proportion test. A total of 709-cases (69.5%) of 1020-subjects showed one or more IFs in CBCT images. Nasal cavity was the most affected area. Based on the CBCT images as a gold standard, different accuracies of various 2D-radiographs were observed in each area of the findings. The highest accuracy was confirmed in soft tissue calcifications with comprehensive radiographs. For detecting nasal septum deviations, postero-anterior cephalograms were the most accurate 2D radiograph. In cases the IFs were not determined because of its ambiguity in 2D radiographs, considering them as an absence of findings increased the accuracy.

Unique patterns of tumor growth related with the risk of lymph node metastasis in papillary thyroid carcinoma.

Although many attempts have been made to predict the occurrence of lymph node metastases from papillary thyroid carcinoma, there are currently no reliable means to accurately predict cervical nodal metastasis. In this study, we present a novel prediction system for the lymph node metastasis based on the histological and cyclin D1 staining features. The frequency of lymph node metastases from a series of 210 papillary thyroid carcinomas was analyzed according to the clinicopathological variables, cyclin D1 staining patterns and BRAF(V600E) mutation in tumor tissue. A total of 113 (54%) patients had lymph node metastasis. Cyclin D1 was constantly expressed at the invasive tumor front and revealed well-defined isolated glands of tumor cells in the extra-tumoral region (isolated glands) and laterally spreading tubular growth along the fibrous septa around the invasive front of the tumor (lateral tubular growth). Upon univariate analysis, an age of less than 45 years (P<0.001), tumor size of 10 mm or more (P<0.001), non-follicular variant (P=0.005), invasive growth pattern (P=0.007), extrathyroid extension (P=0.006), isolated glands (P<0.001), lateral tubular growth (P<0.001) and tumor multiplicity (P=0.005) predicted lymph node metastasis, whereas BRAF(V600E) mutation did not. Upon multivariate analysis, age (P=0.001, odds ratio (OR)=5.146), tumor size (P=0.034, OR=3.119), isolated glands (P<0.001, OR=21.042) and lateral tubular growth (P<0.001, OR=24.652) were found to be strong independent predictors of lymph node metastasis. Cyclin D1 staining of papillary thyroid carcinoma is very useful for identifying the intrathyroidal spreading or multifocality of the tumors. Tumor growth patterns verified by cyclin D1 staining can be used for the identification of papillary thyroid carcinomas with metastatic potential.

Use of rhythmic wire system with miniscrews to correct occlusal-plane canting.

Occlusal-plane canting is a challenging problem for orthodontists because it cannot be solved easily without surgical intervention. Normally, a LeFort I osteotomy and concomitant mandibular surgery is used to correct the problem, even in patients with mild facial asymmetry but with noticeable occlusal-plane canting. Skeletal anchorage can be used in patients with occlusal canting to reduce the need for orthognathic surgery. The purpose of this article was to introduce a biomechanical system-rhythmic wire- to correct occlusal-plane canting. The records of 2 patients treated with this system are shown.

Miniscrew-assisted rapid palatal expansion: A review of recent reports.

The miniscrew-assisted rapid palatal expander (MARPE) has extended not only skeletal effects with fewer dental changes and but also the age limit of nonsurgical maxillary expansion treatment. Amid its gaining popularity in clinical orthodontics, our current understanding of treatment effectiveness, efficiency, and stability needs to be reassessed. In this review article, the authors have attempted to evaluate MARPE from various aspects with a focus on recent studies.

Camouflage treatment of posterior bite collapse in a patient with skeletal asymmetry by using posterior maxillary segmental osteotomy.

Orthodontic treatment of posterior bite collapse due to early loss of molars and the consequent drift of adjacent teeth is complicated. When the posterior bite collapse occurs in patients with facial asymmetry, both transverse and vertical compensation are necessary for camouflage orthodontic treatment. In such cases, posterior maxillary segmental osteotomy (PMSO) can be an effective alternative procedure that simplifies the orthodontic treatment and shows long-term stability through dental compensation within the alveolar bone housing. This case report aimed to describe the orthodontic treatment of maxillary occlusal plane canting caused by severely extruded maxillary teeth in a patient with skeletal facial asymmetry that was corrected with PMSO along with protraction of the lower second molar to replace the space of the extracted first molar. The treatment duration was 18 months, and stable results were obtained after 2 years of retention.

Stability of mini-screws invading the dental roots and their impact on the paradental tissues in beagles.

OBJECTIVE: To examine the stability of mini-screws that invade a dental root by measuring the retention period/failure rate, and to illustrate their effects on paradental tissues. MATERIALS AND METHODS: Three adult male beagle dogs received 48 orthodontic mini-screws. Half of the mini-screws were implanted to invade the roots, and the rest were placed in the middle of the alveolar bone. Half of the mini-screws were loaded immediately. The retention period of the mini-screws was documented. The dogs were euthanized after 8 weeks, and tissue samples were examined histologically. RESULTS: The failure rate of the mini-screws that invaded the roots was 79.2%, and that of the mini-screws in the middle of the alveolar bone was 8.3%. The application of force had little effect on the failed mini-screws. Moderately injured roots were repaired with osteoid and/or cementoid tissues with normal periodontal ligaments, followed by recovery of the original configuration. CONCLUSION: Orthodontic mini-screws had a higher failure rate when placed to invade the dental roots. However, minimally damaged dental roots do not adversely affect the healing process.

Dental midline correction using two component C-orthodontic mini-implant.

OBJECTIVES: Correction of dental origin asymmetry with conventional orthodontic mechanics is at risk of developing side effects because of the inherent asymmetric nature of tooth-borne anchorage-based asymmetric mechanics. Recently, the concept of skeletal anchorage using mini-implants has been introduced in the field of orthodontics and have shown successful results. The aim of this study is to demonstrate the clinical application of osseointegration of surface treated two component mini-implants (C-implant) in managing dental midline correction. MATERIALS AND METHODS: The characteristics and procedure of asymmetric retraction for treating maximum anchorage using C-implant is shown with case reports of treated patients. The biomechanics and comparison to conventional mini-implant assisted midline correction methods are also described. RESULTS: The authors show the clinical application of the mini implant dependent retraction technique during anterior retraction on various cases, possible indications, and simplicity of use. CONCLUSION: This article describes effective and simple methods of correcting dental asymmetry with mini-implants and its advantages will be discussed.