Electroactive Molecularly Imprinted Polymer Nanoparticles (eMIPs) for Label-free Detection of Glucose: Toward Wearable Monitoring.

The diagnosis of diabetes mellitus (DM) affecting 537 million adults worldwide relies on invasive and costly enzymatic methods that have limited stability. Electroactive polypyrrole (PPy)-based molecularly imprinted polymer nanoparticles (eMIPs) have been developed that rival the affinity of enzymes whilst being low-cost, highly robust, and facile to produce. By drop-casting eMIPs onto low-cost disposable screen-printed electrodes (SPEs), sensors have been manufactured that can electrochemically detect glucose in a wide dynamic range (1 µm-10 mm) with a limit of detection (LOD) of 26 nm. The eMIPs sensors exhibit no cross reactivity to similar compounds and negligible glucose binding to non-imprinted polymeric nanoparticles (eNIPs). Measurements of serum samples of diabetic patients demonstrate excellent correlation (>0.93) between these eMIPs sensor and the current gold standard Roche blood analyzer test. Finally, the eMIPs sensors are highly durable and reproducible (storage >12 months), showcasing excellent robustness and thermal and chemical stability. Proof-of-application is provided via measuring glucose using these eMIPs sensor in a two-electrode configuration in spiked artificial interstitial fluid (AISF), highlighting its potential for non-invasive wearable monitoring. Due to the versatility of the eMIPs that can be adapted to virtually any target, this platform technology holds high promise for sustainable healthcare applications via providing rapid detection, low-cost, and inherent robustness.

Electrochemical and thermal detection of allergenic substance lysozyme with molecularly imprinted nanoparticles.

Lysozyme (LYZ) is a small cationic protein which is widely used for medical treatment and in the food industry to act as an anti-bacterial agent; however, it can trigger allergic reactions. In this study, high-affinity molecularly imprinted nanoparticles (nanoMIPs) were synthesized for LYZ using a solid-phase approach. The produced nanoMIPs were electrografted to screen-printed electrodes (SPEs), disposable electrodes with high commercial potential, to enable electrochemical and thermal sensing. Electrochemical impedance spectroscopy (EIS) facilitated fast measurement (5-10 min) and is able to determine trace levels of LYZ (pM) and can discriminate between LYZ and structurally similar proteins (bovine serum albumin, troponin-I). In tandem, thermal analysis was conducted with the heat transfer method (HTM), which is based on monitoring the heat transfer resistance at the solid-liquid interface of the functionalized SPE. HTM as detection technique guaranteed trace-level (fM) detection of LYZ but needed longer analysis time compared to EIS measurement (30 min vs 5-10 min). Considering the versatility of the nanoMIPs which can be adapted to virtually any target of interest, these low-cost point-of-care sensors hold great potential to improve food safety.

Awareness Regarding POCSO Act: A Cross-Sectional Study.

BACKGROUND: Child sexual abuse occurs in a variety of settings and the POCSO Act, 2012 came into force with effect from November 14, 2012. OBJECTIVES: A community-based cross-sectional study to assess the knowledge regarding the POCSO Act among adults in the rural community of Chandigarh was carried out in full compliance with ethical standards provided by the institutional research and ethical committee. MATERIALS AND METHODS: A nonprobability sampling technique was used to select 190 subjects from Sector 56, Palsora, Chandigarh. RESULTS: This study found that 55.8% have an adequate level of knowledge and 44.2% have an inadequate level of knowledge. CONCLUSIONS: The variables heard or seen by a victim of child abuse have only significant associations with the level of knowledge.

Metal-free photocatalytic thiol-ene/thiol-yne reactions.

The organic photocatalyst (9-mesityl-10-methylacridinum tetrafluoroborate) in the presence of visible light is used to initiate thiol-ene and thiol-yne reactions. Thiyl radicals are generated upon quenching the photoexcited catalyst with a range of thiols. The highlighted mild nature of the reaction conditions allows a broad substrate scope of the reactants. Relying on this efficient metal-free condition, both thiol-ene and thiol-yne reactions between carbohydrates and peptides could be realized in excellent yields.

Self-assembled monolayer of 2-(((5-mercapto-1,3,4-thiadiazol-2-yl)imino)methyl)phenol (MTP) on gold surface: A platform for impedimetric and potentiometric sensing of mercury(II).

2-(((5-mercapto-1,3,4-thiadiazol-2-yl)imino)methyl)phenol (MTP) was synthesized, self-assembled on the surface of gold (Au) electrode (Au-MTP) followed by characterization using Cyclic voltammetry (CV) and Electrochemical impedance spectroscopy (EIS). CV and EIS confirmed the formation of well-organized Au-MTP SAM free from defects and pinholes. Au-MTP was further utilized as a platform for sensing of Hg2+ using EIS. The results showed sensitive and selective response of Au-MTP towards Hg2+ in the linear concentration range from 1.0 × 10-10 M to 1.0 × 10-4 M with limit of detection (LoD) of 5.6 × 10-11 M. Furthermore, MTP was self-assembled on gold nanoparticles (AuNPs) and MTP bound gold nanoparticles (MTP-AuNPs) so obtained were used as modifier for construction of carbon paste electrode (CPE). Hg2+-CPE exhibited Nernstian response towards Hg2+ with slope of 28.3 mV/decade in the concentration range from 1.0 × 10-5 M to 1.0 × 10-1 M with LoD of 6.3 × 10-6 M. Both the Au-MTP EIS sensor and Hg2+-CPE were successfully applied for estimation of Hg2+ content in tap water samples.

S-S bridged Schiff bases as versatile ionophores: Synthesis and application for electrochemical sensing of Copper(II) and Mercury(II).

Schiff base derivates (3, 4 and 5) comprising pseudo cavity with different heteroatoms (O, N and S) were designed, synthesized and explored for their detection behaviour towards diverse metal ions. In UV and fluorescence studies, all three receptors exhibited sensitive response towards Cu2+ while 5 showed sensitivity for Hg2+ also. To explore the synthesized receptors for electrochemical behaviour, voltammetric studies were conducted where 3, 4 and 5 exhibited sensitive response towards Cu2+ with detection limits of 9.8 × 10-7 M, 9.0 × 10-7 M and 1.41 × 10-7 M, respectively. The receptor 5 also showed response towards Hg2+ with detection limit of 5.61 × 10-8 M. The formation of complexes, 3/4+Cu2+ and 5+Cu2+/Hg2+ was supported by large values of binding constant and associated negative free energy change. The binding mechanism of 3, 4 and 5 towards respective metal ions was confirmed using 1H-NMR and HR-MS studies. Further, to utilize the proposed sensors for on-site monitoring of analyte metal ions, carbon paste electrodes (CPEs) were constructed by incorporating 3, 4 and 5. All CPEs showed Nernstian response with lower detection limits and excellent selectivity and successfully utilized for the determination of Cu2+ and Hg2+ in groundwater samples.

Sensitive Electrochemical and Thermal Detection of Human Noroviruses Using Molecularly Imprinted Polymer Nanoparticles Generated against a Viral Target.

Norovirus (NoV) is the predominant cause of foodborne illness globally; current detection methods are typically expensive, have inadequate sensitivities, and utilize biological receptors with poor stability. Therefore, accurate, cost-effective, and highly stable detection methods are needed to screen for NoV in foods. We developed molecularly imprinted polymer nanoparticles (nanoMIPs) to detect NoV using a small target epitope (12 amino acids) with a solid-phase synthesis approach. The performance of three batches of nanoMIPs with varying monomer compositions (nanoMIP-1, -2, and -3) were compared both experimentally and computationally. Surface plasmon resonance examined nanoMIP binding affinity to norovirus virus-like particles (NoV-LPs), whereby nanoMIP-1 had the lowest KD value of 0.512 µM. This is significant, as traditional targets for generation of norovirus ligands previously reported were generated against drastically larger norovirus capsid segments that have limitations in ease of production. Further, an electrochemical sensor was developed by covalently attaching the nanoMIPs to glassy carbon electrodes. In agreement with our predictions from density functional theory simulations, electrochemical impedance spectroscopy showed a sensitive response toward NoV-LPs for nanoMIP batches tested; however, nanoMIP-1 was optimal, with an excellent detection limit of 3.4 pg/mL (1.9 × 105 particles/mL). Due to its exceptional performance, nanoMIP-1 was immobilized to screen-printed electrodes and utilized within a thermal sensor, where it exhibited a low detection limit of 6.5 pg/mL (3.7 × 105 particles/mL). Crucially, we demonstrated that nanoMIP-1 could detect NoV in real food samples (romaine lettuce) by using electrochemical and thermal sensors. Consequently, the study highlights the exceptional potential of nanoMIPs to replace traditional biological materials (e.g., antibodies) as sensitive, versatile, and highly stable receptors within NoV sensors.

Visible-Light-Mediated Thiol-Ene Reactions through Organic Photoredox Catalysis.

Synthetically useful radical thiol-ene reactions can be initiated by visible-light irradiation in the presence of an organic photocatalyst, 9-mesityl-10-methylacridinum tetrafluoroborate. The key thiyl radical intermediates are generated upon quenching of the photoexcited catalyst with a variety of thiols. The success of this method requires only the use of near-stoichiometric levels of alkene coupling partners. Using these highly efficient metal-free conditions, thiol-ene reactions between carbohydrates and peptides can be accomplished in excellent yields.