Carbon dioxide and trace oxygen concentrations impact growth and product formation of the gut bacterium Phocaeicola vulgatus.

BACKGROUND: The promising yet barely investigated anaerobic species Phocaeicola vulgatus (formerly Bacteroides vulgatus) plays a vital role for human gut health and effectively produces organic acids. Among them is succinate, a building block for high-value-added chemicals. Cultivating anaerobic bacteria is challenging, and a detailed understanding of P. vulgatus growth and metabolism is required to improve succinate production. One significant aspect is the influence of different gas concentrations. CO2 is required for the growth of P. vulgatus. However, it is a greenhouse gas that should not be wasted. Another highly interesting aspect is the sensitivity of P. vulgatus towards O2. In this work, the effects of varying concentrations of both gases were studied in the in-house developed Respiratory Activity MOnitoring System (RAMOS), which provides online monitoring of CO2, O2, and pressure under gassed conditions. The RAMOS was combined with a gas mixing system to test CO2 and O2 concentrations in a range of 0.25-15.0 vol% and 0.0-2.5 vol%, respectively. RESULTS: Changing the CO2 concentration in the gas supply revealed a CO2 optimum of 3.0 vol% for total organic acid production and 15.0 vol% for succinate production. It was demonstrated that the organic acid composition changed depending on the CO2 concentration. Furthermore, unrestricted growth of P. vulgatus up to an O2 concentration of 0.7 vol% in the gas supply was proven. The viability decreased rapidly at concentrations larger than or equal to 1.3 vol% O2. CONCLUSIONS: The study showed that P. vulgatus requires little CO2, has a distinct O2 tolerance and is therefore well suited for industrial applications.

Comparison of methods for determining the effectiveness of antibacterial functionalized textiles.

Antimicrobial functionalization of textiles is important for various applications, such as protection of textile materials from decomposition, generation of more effective wound dressings, and the prevention of infections or malodors resulting from bacterial growth. In order to test the efficacy of new products, their antibacterial activity needs to be evaluated. At present, several different procedures are being used for this purpose, hindering comparisons among different studies. The present paper compares five of these assays using a sample panel of different textiles functionalized with copper (Cu) and silver (Ag) as antibacterial agents, and discusses the suitability of these methods for different analytical requirements. Bacterial viability was determined by measuring the optical density at 600 nm, a colorimetric assay based on MTT (3-[4, 5-dimethylthiazol-2-yl]-2, 5 diphenyl tetrazolium bromide) conversion, an agar diffusion assay, and colony formation, either after culturing in media containing textile samples, or after recovery from textiles soaked with bacterial suspension. All experiments were performed with a Gram-negative (Escherichia coli) and a Gram-positive (Staphylococcus warneri) model organism. In general, the results yielded by the different methods were of good comparability. To identify the most suitable test system for the particular type of antibacterial coating, several factors need to be taken into account, such as choosing appropriate endpoints for analyzing passive or active antibacterial effects, selection of relevant microorganisms, correcting for potential interference by leaching of colored textile coatings, required hands on time, and the necessary sensitivity.