RESUMO
CD28 and CTLA-4 (CD152) play essential roles in regulating T cell immunity, balancing the activation and inhibition of T cell responses, respectively. Although both receptors share the same ligands, CD80 and CD86, the specific requirement for two distinct ligands remains obscure. In the present study, we demonstrate that, although CTLA-4 targets both CD80 and CD86 for destruction via transendocytosis, this process results in separate fates for CTLA-4 itself. In the presence of CD80, CTLA-4 remained ligand bound, and was ubiquitylated and trafficked via late endosomes and lysosomes. In contrast, in the presence of CD86, CTLA-4 detached in a pH-dependent manner and recycled back to the cell surface to permit further transendocytosis. Furthermore, we identified clinically relevant mutations that cause autoimmune disease, which selectively disrupted CD86 transendocytosis, by affecting either CTLA-4 recycling or CD86 binding. These observations provide a rationale for two distinct ligands and show that defects in CTLA-4-mediated transendocytosis of CD86 are associated with autoimmunity.
Assuntos
Antígenos CD , Antígenos CD28 , Antígenos CD/metabolismo , Antígenos de Diferenciação/metabolismo , Antígeno B7-1 , Antígeno B7-2/genética , Antígenos CD28/metabolismo , Antígeno CTLA-4/genética , Moléculas de Adesão Celular , Ligantes , Ativação LinfocitáriaRESUMO
CTLA-4 and PD-1 are key immune checkpoint receptors that are targeted in the treatment of cancer. A recently identified physical interaction between the respective ligands, CD80 and PD-L1, has been shown to block PD-L1/PD-1 binding and to prevent PD-L1 inhibitory functions. Since CTLA-4 is known to capture and degrade its ligands via transendocytosis, we investigated the interplay between CD80 transendocytosis and CD80/PD-L1 interaction. We find that transendocytosis of CD80 results in a time-dependent recovery of PD-L1 availability that correlates with CD80 removal. Moreover, CD80 transendocytosis is highly specific in that only CD80 is internalised, while its heterodimeric PD-L1 partner remains on the plasma membrane of the antigen-presenting cell (APC). CTLA-4 interactions with CD80 do not appear to be inhibited by PD-L1, but efficient removal of CD80 requires an intact CTLA-4 cytoplasmic domain, distinguishing this process from more general trogocytosis and simple CTLA-4 binding to CD80/PD-L1 complexes. These data are consistent with CTLA-4 acting as modulator of PD-L1:PD-1 interactions via control of CD80.
Assuntos
Proteínas de Checkpoint Imunológico , Receptor de Morte Celular Programada 1 , Antígeno CTLA-4 , Receptor de Morte Celular Programada 1/genética , Antígeno B7-H1/genética , Antígeno B7-H1/metabolismo , Ligantes , Antígeno B7-1/genética , Antígeno B7-1/metabolismo , Moléculas de Adesão CelularRESUMO
Anti-CTLA-4 antibodies have successfully elicited durable tumor regression in the clinic; however, long-term benefit is limited to a subset of patients for select cancer indications. The incomplete understanding of their mechanism of action has hindered efforts at improvement, with conflicting hypotheses proposing either antagonism of the CTLA-4:B7 axis or Fc effector-mediated regulatory T cell (Treg) depletion governing efficacy. Here, we report the engineering of a nonantagonistic CTLA-4 binding domain (b1s1e2) that depletes intratumoral Tregs as an Fc fusion. Comparison of b1s1e2-Fc to 9d9, an antagonistic anti-CTLA-4 antibody, allowed for interrogation of the separate contributions of CTLA-4 antagonism and Treg depletion to efficacy. Despite equivalent levels of intratumoral Treg depletion, 9d9 achieved more long-term cures than b1s1e2-Fc in MC38 tumors, demonstrating that CTLA-4 antagonism provided additional survival benefit. Consistent with prior reports that CTLA-4 antagonism enhances priming, treatment with 9d9, but not b1s1e2-Fc, increased the percentage of activated T cells in the tumor-draining lymph node (tdLN). Treg depletion with either construct was restricted to the tumor due to insufficient surface CTLA-4 expression on Tregs in other compartments. Through intratumoral administration of diphtheria toxin in Foxp3-DTR mice, we show that depletion of both intratumoral and nodal Tregs provided even greater survival benefit than 9d9, consistent with Treg-driven restraint of priming in the tdLN. Our data demonstrate that anti-CTLA-4 therapies require both CTLA-4 antagonism and intratumoral Treg depletion for maximum efficacy-but that potential future therapies also capable of depleting nodal Tregs could show efficacy in the absence of CTLA-4 antagonism.
Assuntos
Neoplasias , Linfócitos T Reguladores , Camundongos , Animais , Neoplasias/tratamento farmacológico , Neoplasias/genética , Antígeno CTLA-4 , Depleção LinfocíticaRESUMO
The Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction is used as a ligation tool throughout chemical and biological sciences. Despite the pervasiveness of CuAAC, there is a need to develop more efficient methods to form 1,4-triazole ligated products with low loadings of Cu. In this paper, we disclose a mechanistic model for the ynamine-azide (3 + 2) cycloadditions catalyzed by copper(II) acetate. Using multinuclear nuclear magnetic resonance spectroscopy, electron paramagnetic resonance spectroscopy, and high-performance liquid chromatography analyses, a dual catalytic cycle is identified. First, the formation of a diyne species via Glaser-Hay coupling of a terminal ynamine forms a Cu(I) species competent to catalyze an ynamine-azide (3 + 2) cycloaddition. Second, the benzimidazole unit of the ynamine structure has multiple roles: assisting C-H activation, Cu coordination, and the formation of a postreaction resting state Cu complex after completion of the (3 + 2) cycloaddition. Finally, reactivation of the Cu resting state complex is shown by the addition of isotopically labeled ynamine and azide substrates to form a labeled 1,4-triazole product. This work provides a mechanistic basis for the use of mixed valency binuclear catalytic Cu species in conjunction with Cu-coordinating alkynes to afford superior reactivity in CuAAC reactions. Additionally, these data show how the CuAAC reaction kinetics can be modulated by changes to the alkyne substrate, which then has a predictable effect on the reaction mechanism.
RESUMO
A widely utilised class of ligands in synthesis and catalysis, ß-diketiminate (BDI) or NacNac compounds were initially considered innocent in the sense that they remained intact in all their applications. That changed when the γ-C-H unit of their NCCCN backbone was found to engage in reactions with electrophiles. Here, we show that this special reactivity can be used advantageously to prepare tripodal modifications of the common NacNac ligand derived from 2,6-diisopropylphenyl-ß-methyldiketimine [NacNacH (Me, Dipp)]. Lithiation to give NacNacLi, followed by reactions with isocyanates, isothiocyanates and a carbodiimide, have afforded a series of tripodal NacNac variants having N,N,N,O; N,N,N,S; or N,N,N,N potential dentation sites, many of which have been crystallographically characterised. Distinct ligating modes of these new ligands have been elucidated through the crystal structures of their lithiated derivatives.
RESUMO
Molecular heterobimetallic hydride complexes of lanthanide (Ln) and main-group (MG) metals exhibit chemical properties unique from their monometallic counterparts and are highly reactive species, making their synthesis and isolation challenging. Herein, molecular Ln/Al heterobimetallic trihydrides [Ln(Tp)2(µ-H)2Al(H)(Nâ³)] [2-Ln; Ln = Y, Sm, Dy, Yb; Tp = hydrotris(1-pyrazolyl)borate; Nâ³ = N(SiMe3)2] have been synthesized by facile insertion of aminoalane [Me3N·AlH3] into the Ln-N amide bonds of [Ln(Tp)2(Nâ³)] (1-Ln). Thus, this is a simple synthetic strategy to access a range of Ln/Al hydrides. Reactivity studies demonstrate that 2-Ln is a heterobimetallic hydride, with evidence for the cooperative nature of 2-Ln shown by the catalytic amine-borane dehydrocoupling under ambient conditions in contrast to its monomeric counterparts.
RESUMO
The larval fathead minnow, Pimephales promelas, 7-day subchronic survival and growth standard toxicity test method is commonly used for research and regulatory testing of effluents and compounds, including emerging contaminants such as Perfluorooctanesulfonic Acid (PFOS). Existing feeding guidelines for testing are described in multiple methods but are open to interpretation. The current study sought to determine the impact of feeding ration on P. promelas survival and biomass during a subchronic exposure to PFOS. The study was conducted in two phases: (1) a control experiment to determine the most significant feeding ration factors that maximize biomass, with consideration to laboratory logistics, and (2) application of down-selected feeding rations in a PFOS exposure to determine toxicity reference values. The control optimization study supported that feeding ration and feeding frequency were significant factors in fish biomass. In the subsequent PFOS study, fish were fed a high or low ration of Artemia twice daily, while exposed to 0.3 to 3.4 mg/L PFOS. Fish fed a high ration of Artemia had significantly (p < 0.05) greater biomass than fish fed a low ration in all exposure concentrations except 3.4 mg/L, where survival was low in both treatments. The feeding ration was not a significant factor on the survival endpoint for either treatment, but the PFOS concentration was (p < 0.0001) (high ration LC50 = 2.44 mg/L; low ration LC50 = 2.25 mg/L). These findings contribute to a better understanding of the impact feeding ration has in toxicity assessments and downstream regulatory decisions.
Assuntos
Ácidos Alcanossulfônicos , Cyprinidae , Fluorocarbonos , Larva , Poluentes Químicos da Água , Animais , Ácidos Alcanossulfônicos/toxicidade , Fluorocarbonos/toxicidade , Cyprinidae/fisiologia , Poluentes Químicos da Água/toxicidade , Larva/efeitos dos fármacos , Larva/crescimento & desenvolvimento , Testes de Toxicidade SubcrônicaRESUMO
Controlled release of active ingredients are important for drug delivery and more recently environmental applications including modulated dosing of chemical and biological controls. This study demonstrates the importance of investigating various material science factors that can influence the diffusion rates of alginate beads to improve and tune their performance for marine environmental applications. This investigation aimed to design a rational workflow to aid in leveraging alginate bead use as a carrier matrix for releasing a specific active agent into water. Experiments were conducted to focus on the narrow a large list of relevant material formulation parameters, which included chitosan molecular weight, chitosan concentration, calcium concentration, drop height, and bead size. Once the most relevant material preparation methods were screened, a more robust statistic Design of Experiments approach was performed and results determined the important (and unimportant) factors for increasing dye release kinetics in marine water. The process was further streamlined by narrowing the critical experimental factors to a three-level based on the prior analysis: chitosan MW, chitosan concentration, and bead size. Analysis of the collected data indicated that while chitosan MW had a negligible impact (Fstatistic = 0.22), bead size (Fstatistic = 60.33) significantly influenced the diffusion rates based on surface area. However, chitosan MW had minor effects where lower chitosan MW enabled higher product release rates. This case investigation was a novel application of the design of experiment approach towards environmental applications to understand differences in release rates to marine waters for the first time and the workflow provided also serve as the basis for researchers to optimize other environmental applications requiring optimization when it is unknown how a large number of formulation variables will impact performance in different environmental scenarios.
Assuntos
Quitosana , Quitosana/química , Alginatos/química , Cálcio , Água , Ácidos Hexurônicos/química , Ácido Glucurônico/químicaRESUMO
Palladium salts and complexes were tested separately and in the presence of added ligands as potential sources of aryl radicals in ground-state coupling reactions of aryl halide with arenes under basic conditions (KOtBu). Our recently developed assay for aryl radicals was employed to test for aryl radicals. In this assay, aryl radicals derived from the test substrate, 1-iodo-2,6-dimethylbenzene 7, undergo base-promoted homolytic aromatic substitution (BHAS) with benzene to produce 2,6-dimethylbiphenyl 8 and biphenyl 9 in an approximately 1:4 ratio as well as m-xylene 10. The biphenyl arises from a diagnostic radical transfer reaction with the solvent benzene. Using substrate 7 with a range of Pd sources as potential initiators led to formation of 8, 9, and 10 in varying amounts. However, when any one of a range of diphosphinoferrocenes (e.g., dppf or dippf) or BINAP or the monophosphine, diphenylphosphinoferrocene, was added as a ligand to Pd(OAc)2, the ratio of [2,6-dimethylbiphenyl 8: biphenyl 9] moved decisively to that expected from the BHAS (radical) pathway. Further studies were conducted with dppf. When dppf was added to each of the other Pd sources, the ratio of coupled products was also diverted to that expected for radical BHAS chemistry. Deuterium isotope studies and radical trap experiments provide strong additional support for the involvement of aryl radicals. Accordingly, under these ground-state conditions, palladium sources, in the presence of defined ligands, convert aryl iodides to aryl radicals. A rationale is proposed for these observations.
RESUMO
Exploiting bimetallic cooperation alkali-metal manganate (II) complexes can efficiently promote oxidative homocoupling of terminal alkynes furnishing an array of conjugated 1,3-diynes. The influence of the alkali-metal on these C-C bond forming processes has been studied by preparing and structurally characterizing the alkali-metal tetra(alkyl) manganates [(TMEDA)2 Na2 Mn(CH2 SiMe3 )4 ] and [(PMDETA)2 K2 Mn(CH2 SiMe3 )4 ]. Reactivity studies using phenylacetylene as a model substrate have revealed that for the homocoupling to take place initial metalation of the alkyne is required. In this regard, the lack of basicity of neutral Mn(CH2 SiMe3 )2 precludes the formation of the diyne. Contrastingly, the tetra(alkyl) alkali-metal manganates behave as polybasic reagents, being able to easily deprotonate phenylacetylene yielding [{(THF)4 Na2 Mn(C≡CPh)4 }∞ ] and [(THF)4 Li2 Mn(C≡CPh)4 ]. Controlled exposure of [{(THF)4 Na2 Mn(C≡CPh)4 }∞ ] and [(THF)4 Li2 Mn(C≡CPh)4 ] to dry air confirmed their intermediary in formation of 1,4-diphenyl-1,3-butadiyne in excellent yields. While the Na/Mn(II) partnership proved to be the most efficient in stoichiometric transformations, under catalytic regimes, the combination of MC≡CAr (M= Li, Na) and MnCl2 (6â mol %) only works for lithium, most likely due to the degradation of alkynylsodiums under the aerobic reaction conditions.
Assuntos
Alcinos , Sódio , Alcinos/química , Lítio/química , Estresse Oxidativo , ÁlcalisRESUMO
Three distinct routes are reported to the soluble, dihydridoaluminate compounds, AM[Al(NONDipp )(H)2 ] (AM=Li, Na, K, Rb, Cs; [NONDipp ]2- =[O(SiMe2 NDipp)2 ]2- ; Dipp=2,6-iPr2 C6 H3 ) starting from the alkali metal aluminyls, AM[Al(NONDipp )]. Direct H2 hydrogenation of the heavier analogues (AM=Rb, Cs) produced the first examples of structurally characterized rubidium and caesium dihydridoaluminates, although harsh conditions were required for complete conversion. Using 1,4-cyclohexadiene (1,4-CHD) as an alternative hydrogen source in transfer hydrogenation reactions provided a lower energy pathway to the full series of products for AM=Li-Cs. A further moderation in conditions was noted for the thermal decomposition of the (silyl)(hydrido)aluminates, AM[Al(NONDipp )(H)(SiH2 Ph)]. Probing the reaction of Cs[Al(NONDipp )] with 1,4-CHD provided access to a novel inverse sandwich complex, [{Cs(Et2 O)}2 {Al(NONDipp )(H)}2 (C6 H6 )], containing the 1,4-dialuminated [C6 H6 ]2- dianion and representing the first time that an intermediate in the commonly utilized oxidation process of 1,4-CHD to benzene has been trapped. The synthetic utility of the newly installed Al-H bonds has been demonstrated by their ability to reduce CO2 under mild conditions to form the bis-formate AM[Al(NONDipp )(O2 CH)2 ] compounds, which exhibit a diverse series of eyecatching bimetallacyclic structures.
RESUMO
Three new ligands containing a bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxydiimide unit have been used to assemble lantern-type metal-organic cages with the general formula [Cu4 L4 ]. Functionalisation of the backbone of the ligands leads to distinct crystal packing motifs between the three cages, as observed with single-crystal X-ray diffraction. The three cages vary in their gas sorption behaviour, and the capacity of the materials for CO2 is found to depend on the activation conditions: softer activation conditions lead to superior uptake, and one of the cages displays the highest BET surface area found for lantern-type cages so far.
Assuntos
Metais , Ligantes , Porosidade , Transporte Biológico , Cristalografia por Raios XRESUMO
BACKGROUND: Mobile Cardiac Outpatient Telemetry (MCOT) can be used to screen high risk patients for atrial fibrillation (AF). These devices rely primarily on algorithmic detection of AF events, which are then stored and transmitted to a clinician for review. It is critical the positive predictive value (PPV) of MCOT detected AF is high, and this often leads to reduced sensitivity, as device manufacturers try to limit false positives. OBJECTIVE: The purpose of this study was to design a two stage classifier using artificial intelligence (AI) to improve the PPV of MCOT detected atrial fibrillation episodes whilst maintaining high levels of detection sensitivity. METHODS: A low complexity, RR-interval based, AF classifier was paired with a deep convolutional neural network (DCNN) to create a two-stage classifier. The DCNN was limited in size to allow it to be embedded on MCOT devices. The DCNN was trained on 491,727 ECGs from a proprietary database and contained 128,612 parameters requiring only 158 KB of storage. The performance of the two-stage classifier was then assessed using publicly available datasets. RESULTS: The sensitivity of AF detected by the low complexity classifier was high across all datasets (>93%) however the PPV was poor (<76%). Subsequent analysis by the DCNN increased episode PPV across all datasets substantially (>11%), with only a minor loss in sensitivity (<5%). This increase in PPV was due to a decrease in the number of false positive detections. Further analysis showed that DCNN processing was only required on around half of analysis windows, offering a significant computational saving against using the DCNN as a one-stage classifier. CONCLUSION: DCNNs can be combined with existing MCOT classifiers to increase the PPV of detected AF episodes. This reduces the review burden for physicians and can be achieved with only a modest decrease in sensitivity.
Assuntos
Fibrilação Atrial , Aprendizado Profundo , Humanos , Fibrilação Atrial/diagnóstico , Eletrocardiografia , Inteligência Artificial , Redes Neurais de ComputaçãoRESUMO
The accessibility and popularity of additive manufacturing (AM) has increased over the past decade. Environmental hazard assessment and safety data sheets for 3D printer feedstocks has lagged technology development. Vat photopolymerization may have unique risks relative to other AM technologies due to mishandling of uncured monomers/oligomer feedstocks and its decreasing cost enabling uninformed residential use. The acute and chronic toxicity of six uncured resins to Ceriodaphnia dubia was explored. Two-day acute toxicity (LC50) ranged from 2.6 to 33 mg/L and inhibition concentrations (IC25) values for reproduction ranged from 0.33 to 16 mg/L. Cleaning and waste management procedures recommended in user guides could be the most hazardous handling scenario as use of isopropyl alcohol increases miscibility and thus the fate, transport and bioavailability of the uncured resins. Residential users may often be poorly informed about potential toxicity and the need for a plan for use, handling, and waste management of uncured resins.
Assuntos
Cladocera , Poluentes Químicos da Água , Animais , Testes de Toxicidade Crônica , Poluentes Químicos da Água/toxicidade , Cladocera/fisiologia , Impressão TridimensionalRESUMO
Catalytic reduction of a representative set of imines, both aldimines and ketimines, to amines has been studied using transfer hydrogenation from 1,4-dicyclohexadiene. Unusually, this has been achieved using s-block pre-catalysts, namely 1-metallo-2-tert-butyl-1,2-dihydropyridines, 2-tBuC5 H5 NM, M(tBuDHP), where M=Li-Cs. Reactions have been monitored in C6 D6 and tetrahydrofuran-d8 (THF-d8 ). A definite trend is observed in catalyst efficiency with the heavier alkali metal tBuDHPs outperforming the lighter congeners. In general, Cs(tBuDHP) is the optimal pre-catalyst with, in the best cases, reactions producing quantitative yields of amines in minutes at room temperature using 5â mol % catalyst. Supporting the experimental study, Density Functional Theory (DFT) calculations have also been carried out which reveal that Cs has a pathway with a significantly lower rate determining step than the Li congener. In the postulated initiation pathways DHP can act as either a base or as a surrogate hydride.
RESUMO
Rare examples of heavier alkali metal manganates [{(AM)Mn(CH2 SiMe3 )(N'Ar )2 }∞ ] (AM=K, Rb, or Cs) [N'Ar =N(SiMe3 )(Dipp), where Dipp=2,6-iPr2 -C6 H3 ] have been synthesised with the Rb and Cs examples crystallographically characterised. These heaviest manganates crystallise as polymeric zig-zag chains propagated by AMâ â â π-arene interactions. Key to their preparation is to avoid Lewis base donor solvents. In contrast, using multidentate nitrogen donors encourages ligand scrambling leading to redistribution of these bimetallic manganate compounds into their corresponding homometallic species as witnessed for the complete Li - Cs series. Adding to the few known crystallographically characterised unsolvated and solvated rubidium and caesium s-block metal amides, six new derivatives ([{AM(N'Ar )}∞ ], [{AM(N'Ar )â TMEDA}∞ ], and [{AM(N'Ar )â PMDETA}∞ ] where AM=Rb or Cs) have been structurally authenticated. Utilising monodentate diethyl ether as a donor, it was also possible to isolate and crystallographically characterise sodium manganate [(Et2 O)2 Na(n Bu)Mn[(N'Ar )2 ], a monomeric, dinuclear structure prevented from aggregating by two blocking ether ligands bound to sodium.
RESUMO
A series of groupâ 1 hydrocarbon-soluble donor free aluminates [AM(t BuDHP)(TMP)Al(i Bu)2 ] (AM=Li, Na, K, Rb) have been synthesised by combining an alkali metal dihydropyridyl unit [(2-t BuC5 H5 N)AM)] containing a surrogate hydride (sp3 C-H) with [(i Bu)2 Al(TMP)]. These aluminates have been characterised by X-ray crystallography and NMR spectroscopy. While the lithium aluminate forms a monomer, the heavier alkali metal aluminates exist as polymeric chains propagated by non-covalent interactions between the alkali metal cations and the alkyldihydropyridyl units. Solvates [(THF)Li(t BuDHP)(TMP)Al(i Bu)2 ] and [(TMEDA)Na(t BuDHP)(TMP)Al(i Bu)2 ] have also been crystallographically characterised. Theoretical calculations show how the dispersion forces tend to increase on moving from Li to Rb, as opposed to the electrostatic forces of stabilization, which are orders of magnitude more significant. Having unique structural features, these bimetallic compounds can be considered as starting points for exploring unique reactivity trends as alkali-metal-aluminium hydride surrog[ATES].
RESUMO
Arylmethyl anions allow alkali-metals to bind in a σ-fashion to the lateral carbanionic centre or a π-fashion to the aryl ring or in between these extremities, with the trend towards π bonding increasing on descending group 1. Here we review known alkali metal structures of diphenylmethane, fluorene, 2-benzylpyridine and 4-benzylpyridine. Next, we synthesise Li, Na, K monomers of these diarylmethyls using polydentate donors PMDETA or Me6 TREN to remove competing oligomerizing interactions, studying the effect that two aromatic rings has on negative charge (de)localisation via NMR, X-ray crystallographic and DFT studies. Diphenylmethyl and fluorenyl anions maintain C(H)-M interactions regardless of alkali-metal, although the adjacent arene carbons engage in interactions with larger alkali-metals. Introducing a nitrogen atom into the ring (at the 2- or 4-position) encourages relocalisation of negative charge away from the deprotonated carbon and onto nitrogen. Phenyl(2-pyridyl)methyl moves from an enamide formation at one extremity (lithium) to an aza-allyl formation at the other extremity (potassium), while C- or N-coordination modes become energetically viable for Na and K phenyl(4-pyridyl)methyl complexes.
Assuntos
Metais Alcalinos , Álcalis , Ânions/química , Cátions/química , Metais Alcalinos/química , Modelos MolecularesRESUMO
A modular approach to prepare tri- and tetracyclic carbazoles by a sequential [3 + 2]heteroannulation is described. First, optimization of Pd-catalyzed Buchwald-Hartwig amination followed by C/N-arylation in a one-pot process is established. Second, mechanistic analyses identified the origins of chemo- and regioselective sequential control of both bond-forming steps. Finally, the substrate scope is demonstrated by the preparation of a range of tri- and tetracyclic carbazoles, including expedient access to several natural products and anti-cancer agents.
Assuntos
Carbazóis , Paládio , Aminação , CatáliseRESUMO
As shown by X-ray crystallography, crystals of 3ß-acetoxy-16,17-seco-17,20-dioxopregn-5-ene-16-nitrile are dimorphic. The regioselectivity of the Norrish-Yang type II photocyclization under visible light of this steroidal 1,2-diketone, which bears primary, secondary, and tertiary nonequivalent abstractable γ-hydrogens, dramatically increases in the crystalline state of both polymorphs. X-ray crystallography and molecular mechanics calculations reveal crystal structure-solid state photochemistry relationships.