Effects of uridine and nucleotides on hemostasis parameters.

Several purinergic receptors have been identified on platelets which are involved in hemostatic and thrombotic processes. The aim of the present study was to investigate the effects of uridine and its nucleotides on platelet aggregation and hemostasis in platelet-rich plasma (PRP) and whole blood. The effects of uridine, UMP, UDP, and UTP at different final concentrations (1 to 1000 µM) on platelet aggregation were studied using an aggregometer. In PRP samples, platelet aggregation was induced by ADP, collagen and epinephrine 3 min after addition of uridine, UMP, UDP, UTP and saline (as a control). All thromboelastogram experiments were performed at 1000 µM final concentrations of uridine and its nucleotides in whole blood. UDP and UTP were also tested in thromboelastogram with PRP. Our results showed that UDP, and especially UTP, inhibited ADP- and collagen-induced aggregation in a concentration-dependent manner. In whole blood thromboelastogram experiments, UDP stimulated clot formation while UTP suppressed clot formation. When thromboelastogram experiments were repeated with PRP, UTP's inhibitory effect on platelets was confirmed, while UDP's stimulated clot forming effect disappeared. Collectively, our data showed that UTP inhibited platelet aggregation in a concentration-dependent manner and suppressed clot formation. On the other hand, UDP exhibited distinct effects on whole blood or PRP in thromboelastogram. These data suggest that the difference on effects of UTP and UDP might have arisen from the different receptors that they stimulate and warrant further investigation with regard to their in vivo actions on platelet aggregation and hemostasis.

Evaluation of organ weights and ventricular thicknesses in electrocution related deaths based on autopsy reports: A biophysical approach.

OBJECTIVE: To evaluate autopsy reports of the deaths due to electrocution in terms of body mass index, body surface area, and organ weights with a biophysical perspective. METHODS: The retrospective study was conducted in Malatya, Turkiye, and comprised autopsy reports of electrocution cases that were obtained from the local branch of the Council of Forensic Medicine related to the period from 2012 to 2019. Organ weights and ventricular thicknesses were compared in terms of body mass index and body surface area. Electrical marks were also evaluated in detail. Data was analysed using SPSS 18. RESULTS: Of the 45 cases, 36(%) were male and 9(%) were female. The overall mean age was 39±13 years (range: 20-71 years). There were no significant differences in organ weights and ventricular thicknesses in different body mass index groups (p>0.05). The weights of head and heart were significantly different in relation to body surface area (p<0.05), but no significant difference were found for other organs and ventricular thickness (p>0.05). CONCLUSIONS: Comparing the organ weights in electrocution autopsies to normal organ weights may help decide the cause of death. During autopsy, electrical marks should be evaluated by considering the characteristics of the electrical current.

Completion repair exhibits increased healing characteristics compared with in situ repair of partial thickness bursal rotator cuff tears.

PURPOSE: Little information is available regarding the healing capacity of in situ and completion repair for the treatment of partial thickness rotator cuff tears. The purpose of the study was to analyze the healing characteristics of both techniques. METHODS: Twenty-four adult Sprague-Dawley rats were operated. Partial thickness bursal side tears were created bilaterally at the supraspinatus tendons. Additional 6 rats were used as the sham group. The right shoulders were repaired in situ, and the left shoulders were repaired using the tear completion technique on the 10th day after detachment surgery. Rats were sacrificed on the 10th and 30th days after repair surgery. Type I collagen, the TNF-α concentrations, the number and diameter of fibroblasts, and neovascularization were examined at two different time points. RESULTS: The collagen concentration (ng/mg total protein) was significantly increased in both groups at T1 and decreased in the in situ group, whereas completion repair continued to increase at T2 (P < 0.05). The mean fibroblast diameter in the completion repair group continued to increase at both time points (P < 0.05). Neovascularization was significantly increased with tear completion compared with in situ repair (P < 0.05) at T1. No significant (n.s.) differences regarding the TNF-α concentration (pg/mg total protein) were noted for both surgical techniques at T2 (P > 0.05). CONCLUSION: Despite the concerns of detaching the intact tendon, the completion repair technique exhibited increased healing characteristics compared with the in situ technique. The reason for this finding might be the refreshing effect of debridement at the chronic degenerated tendon that could improve the healing response.

Effect of Two-minute Application of 35% Sodium Ascorbate on Composite Bond Strength following Bleaching.

AIM: The aim of this study is to assess the effect of 35% sodium ascorbate on microtensile bond strength of dentin immediately after bleaching with 35% hydrogen peroxide. MATERIALS AND METHODS: A total of 25 sound human 3rd molars were collected. Teeth were randomly divided into five groups for different treatments: Group I [bleaching + immediate bonding (i.e., restoration)], group II (bleaching + delayed bonding), group III (bleaching + sodium ascorbate + immediate bonding), group IV (bleaching + sodium ascorbate + delayed bonding), and group V (bonding only). After bleaching, but before bonding, groups II and IV were stored for 1 week in deionized water at 37°C. All samples were bonded using OptiBoned FL (Kerr) and Filtek Supreme (3M/ESPE). Teeth were sectioned into 1 × 1 mm 2 bars, and microtensile bond strength was tested with a universal testing machine (Instron 8841) at a cross-head speed of 0.5 mm/minute. RESULTS: Microtensile bond strength differed significantly across the five groups, with a significant reduction in microtensile bond strength observed for samples in group I relative to samples in any of the other treatment groups (p < 0.05). CONCLUSION: The application of a high concentration of sodium ascorbate for a shorter time reversed the negative effect of 35% hydrogen peroxide bleaching on composite bonding strength to dentin. CLINICAL SIGNIFICANCE: The negative effects of bleaching on composite bonding can be neutralized by the application of the reversing agent sodium ascorbate thus, increasing the efficiency of clinic chair time. This is clinically relevant for those patients requiring restorative treatment immediately after in-office bleaching.

Proteomic investigation of acute and chronic hypoxia/reoxygenation responsive proteins and pathways in H9C2 cardiomyoblasts.

Background/aim: Ischemic heart diseases continue to be a significant global cardiovascular problem in today's world. Myocardial reperfusion (R) is provided with an effective and rapid treatment; however, it can lead to fatal results, as well as ischemia (I). This study aims to use proteomic analysis to assess proteins and pathways in H9C2 cardiomyoblast cells exposed to hypoxic conditions, followed by reoxygenation, representing I/R injury for both short and long terms, reflecting acute and chronic hypoxia, respectively. Utilizing advanced techniques, our goal is to identify and characterize key proteins undergoing alterations during these critical phases. Materials and methods: H9C2 cardiomyoblasts, a commonly used cell line for simulating in vivo I/R damage, were exposed to normoxia and hypoxia (0.4% O2) in six experimental groups: normoxia (3h), acute hypoxia (3h), acute hypoxia (3h) + reoxygenation (3h), normoxia (21h), chronic hypoxia (21h), and chronic hypoxia (21h) + reoxygenation (3h). Analyses were conducted using Nano LC/MSMS from tryptic digest of the whole cell lysates. Proteins were quantified using the label-free quantification (LFQ) algorithm in Proteome Discoverer 2.4. Results: Proteomic analysis resulted in identification of 2383 protein groups. Proteins that differentially expressed in the various groups were identified (p < 0.05 among mean values for groups). Short-term hypoxia induces mitochondrial damage, energy demand, and cytoskeletal modifications. Chronic hypoxia triggers metabolic shifts, stress-response proteins, and extracellular matrix alterations. Data are available via ProteomeXchange with identifier PXD047994. Conclusion: Our research provides in-depth insights into how H9C2 cardiomyoblasts respond to both short-term and prolonged oxygen deprivation. Understanding hypoxia-related pathophysiology provides avenues for therapeutic intervention in hypoxia-related disorders.

Components of ambient air pollution affect thrombin generation in healthy humans: the RAPTES project.

OBJECTIVES: Increases in ambient particulate matter (PM) have been associated with an elevated risk of stroke, myocardial ischaemia and coronary heart disease, with activation of blood coagulation likely playing an important role. PM-mediated activation of two major activation pathways of coagulation provides a potential mechanism for the observed association between PM and cardiovascular disease. However, it remains unclear which specific characteristics and components of air pollution are responsible. METHODS: In order to investigate those characteristics and components, we semiexperimentally exposed healthy adult volunteers at five different locations with increased contrasts and reduced correlations among PM characteristics. Volunteers were exposed for 5 h, exercising intermittently, 3-7 times at different sites from March to October 2009. On site, we measured PM mass and number concentration, its oxidative potential (OP), content of elemental/organic carbon, trace metals, sulphate, nitrate and gaseous pollutants (ozone, nitrogen oxides). Before and 2 and 18 h after exposure we sampled blood from the participants and measured thrombin generation using the calibrated automated thrombogram. RESULTS: We found that thrombin generation increases in the intrinsic (FXII-mediated) blood coagulation pathway in relation to ambient air pollution exposure. The associations with NO2, nitrate and sulphate were consistent and robust, insensitive to adjustment for other pollutants. The associations with tissue factor-mediated thrombogenicity were not very consistent. CONCLUSIONS: Ex vivo thrombin generation was associated with exposure to NO2, nitrate and sulphate, but not PM mass, PM OP or other measured air pollutants.

Comparison of the Er,Cr:YSGG laser with a chemical vapour deposition bur and conventional techniques for cavity preparation: a microleakage study.

The aim of this study was to compare the effects of the Er,Cr:YSGG laser using chemical vapour deposition (CVD) bur cavity preparation with conventional preparation methods including a diamond bur and a carbide bur on the microleakage with two different adhesive systems. A total of 40 extracted human premolars were randomly assigned to four experimental groups according to the cavity preparation technique: group I diamond bur (Diatech); group II carbide bur (Diatech); group III Er,Cr:YSGG laser (Biolase Millennium II); and group IV CVD bur (CVDentUS). Using the different preparation techniques, Class V standardized preparations were performed on the buccal and lingual surfaces with gingival margins on the dentin and occlusal margins on the enamel. Each preparation group was randomly assigned to two subgroups (five teeth, ten preparations) according to the type of adhesive: an etch-and-rinse adhesive (Adper Single Bond), and a single-step self-etch adhesive (AdheSE One). All preparations were restored with a nanohybrid composite resin in a single increment. Following thermocycling (×500; 5-55°C), the teeth were immersed in basic fuchsin and sectioned in the orovestibular direction. Dye penetration was evaluated under a light microscope by two blinded examiners. Data were statistically analysed with the Kruskal-Wallis and Wilcoxon tests (p<0.05). There were no statistically significant differences between the preparation techniques with either of the two adhesive systems (p>0.05). Comparing the enamel and dentin leakage scores within each group, no statistically significant differences were found (p>0.05). The Er,Cr:YSGG laser cavity preparation did not differ from preparation with CVD, diamond or carbide bur in terms of microleakage with the different adhesive systems.

Modeling and dynamical analysis of the full-length structure of factor XII with zinc.

Zinc (II), the second most abundant transition metal in blood, binds to the initiator of the contact pathway, factor XII (FXII). This binding induces conformational changes in the structure of FXII eventually leading to its activation. Despite many in vitro and in vivo studies on zinc-mediated activation of FXII, its molecular mechanism remains elusive mainly due to absence of a full-length structural model of FXII. To this end, this study investigated the role of zinc in the structure and dynamics of the full-length structure FXII that was obtained through molecular modeling. We have used four structural templates covering more than 70% of the FXII sequence and the remaining interconnecting regions were built by loop modeling. The resulting full-length structure of FXII contained disordered regions, but in comparison to the AlphaFold (AF) prediction, our full-length model represented a more realistic structure because of the disordered regions which were modeled to yield a more compact full-length structure in our model than the AF structure. Other than the disordered regions, our model and AF prediction were highly similar. The resulting full-length FXII structure was used to generate different systems representing the zinc-bound form (holo). Further to assess the contribution of the disulfide bridges, we also analyzed the apo and holo FXII structures with oxidized or reduced cysteine side-chains. Simulations suggested zinc binding conferred rigidity to the structure, particularly to the light chain of FXII. Zinc binding alone was sufficient to limit the backbone flexibility while 15 disulfide bonds, which were scattered throughout the structure, made a less significant contribution to the backbone rigidity. Altogether our results provide insights into the first realistic full-length structure of FXII focusing on the impact of structural zinc and disulfide bridges in the dynamics of this structure.

Early atherosclerosis exhibits an enhanced procoagulant state.

BACKGROUND: Thrombin generation in vivo may be important in regulating atherosclerotic progression. In the present study, we examined for the first time the activity and presence of relevant coagulation proteins in relation to the progression of atherosclerosis. METHODS AND RESULTS: Both early and stable advanced atherosclerotic lesions were collected pairwise from each individual (n=27) during autopsy. Tissue homogenates were prepared from both total plaques and isolated plaque layers, in which the activity of factors (F) II, X, and XII and tissue factor was determined. Microarray analysis was implemented to elucidate local messenger RNA synthesis of coagulation proteins. Part of each specimen was paraffin embedded, and histological sections were immunohistochemically stained for multiple coagulation markers with the use of commercial antibodies. Data are expressed as median (interquartile range [IQR]). Tissue factor, FII, FX, and FXII activities were significantly higher in early atherosclerotic lesions than in stable advanced atherosclerotic lesions. Endogenous thrombin potential and thrombin-antithrombin complex values consolidated a procoagulant profile of early atherosclerotic lesions (endogenous thrombin potential, 1240 nmol/L x min [IQR, 1173 to 1311]; thrombin-antithrombin complex, 1045 ng/mg [IQR, 842.6 to 1376]) versus stable advanced atherosclerotic lesions (endogenous thrombin potential, 782 nmol/L x min [IQR, 0 to 1151]; thrombin-antithrombin complex, 718.4 ng/mg [IQR, 508.6 to 1151]). Tissue factor, FVII, and FX colocalized with macrophages and smooth muscle cells. In addition, multiple procoagulant and anticoagulant proteases were immunohistochemically mapped to various locations throughout the atherosclerotic vessel wall in both early and advanced atherosclerotic stages. CONCLUSIONS: This study shows an enhanced procoagulant state of early-stage atherosclerotic plaques compared with advanced-stage plaques, which may provide novel insights into the role of coagulation during atherosclerotic plaque progression.

The procoagulant effects of fine particulate matter in vivo.

Inhalation of fine particulate matter (<2.5 µm; fine PM) has been shown to increase the risk for cardiovascular events. In this letter, we reappraise the role of tissue factor (TF) antigen and we also summarize changes in measured coagulation proteins in humans and rodents by other studies with fine PM. By considering all studies including ours, we conclude that monitoring the overall coagulation state by measuring capacity assays such as thrombin generation, and quantification of TF activity would be more suitable than determining single coagulation proteins (such as TF antigen) in order to better assess the systemic prothrombotic effects of fine PM.

Pulmonary and cardiovascular effects of traffic-related particulate matter: 4-week exposure of rats to roadside and diesel engine exhaust particles.

Traffic-related particulate matter (PM) may play an important role in the development of adverse health effects, as documented extensively in acute toxicity studies. However, rather little is known about the impacts of prolonged exposure to PM. We hypothesized that long-term exposure to PM from traffic adversely affects the pulmonary and cardiovascular system through exacerbation of an inflammatory response. To examine this hypothesis, Fisher F344 rats, with a mild pulmonary inflammation at the onset of exposure, were exposed for 4 weeks, 5 days/week for 6 h a day to: (a) diluted diesel engine exhaust (PM(DEE)), or: (b) near roadside PM (PM(2.5)). Ultrafine particulates, which are largely present in diesel soot, may enter the systemic circulation and directly or indirectly trigger cardiovascular effects. Hence, we assessed the effects of traffic-related PM on pulmonary inflammation and activity of procoagulants, vascular function in arteries, and cytokine levels in the heart 24 h after termination of the exposures. No major adverse health effects of prolonged exposure to traffic-related PM were detected. However, some systemic effects due to PM(DEE) exposure occurred including decreased numbers of white blood cells and reduced von Willebrand factor protein in the circulation. In addition, lung tissue factor activity is reduced in conjunction with reduced lung tissue thrombin generation. To what extent these alterations contribute to thrombotic effects and vascular diseases remains to be established. In conclusion, prolonged exposure to traffic-related PM in healthy animals may not be detrimental due to various biological adaptive response mechanisms.

Level of trace elements in serum and toenail samples of patients with onychocryptosis (ingrown toenail) and onychomycosis.

BACKGROUND: Onychocryptosis (ingrown toenail) and onychomycosis are common pathologies of the toenail and affecting many people. Since levels of trace elements have been shown to vary in certain diseases, in the presented work, chromium (Cr), copper (Cu), iron (Fe), magnesium (Mg), manganese (Mn), selenium (Se), and zinc (Zn) levels of toenail and serum samples of healthy individuals and patients with onychocryptosis and onychomycosis were compared. METHODS: Serum and toenail samples of 88 voluntary subjects (healthy n = 24; onychomycosis n = 24; onychocryptosis n = 40) aged between 19-80 years were collected. Levels of trace elements in the samples were analyzed by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES Thermo iCAP - 6000). The differences in medians between the groups for elements were evaluated with Kruskal -Wallis H test with post hoc for pairwise comparisons in SPSS 18. RESULTS: Mg (p < 0.001) and Mn (p = 0.002) levels were significantly increased whereas Zn (p = 0.011) level was decreased in toenails of patients with onychomycosis compared to healthy subjects. Although Mg and Mn levels were higher in female subjects with onychomycosis (p = 0.001; p = 0.019), Mn was only increased in male subjects (p = 0.015). Mg was the only trace element found to be independent of sex, age, and smoking status in patients with onychomycosis. However, no significant difference has been found in serum trace element levels neither between any groups nor toenail trace element levels of patients with onychocryptosis and healthy subjects. CONCLUSION: As a response of the human body to pathogens like fungi in toenails, Mg, Mn and Zn levels vary. Especially the role of Mg ions in onychomycosis needs to be investigated more specifically.

Thermal Proteome Profiling and Meltome Analysis of a Thermophilic Bacterial Strain, Geobacillus thermoleovorans ARTRW1: Toward Industrial Applications.

Thermophilic microorganisms that thrive in extreme environments are of great importance because they express heat-resistant enzymes with the potential to serve as biocatalysts in industrial applications. Thermal proteome profiling (TPP) is a multiplexed quantitative mass spectrometry method for analyses of structural information and melting behavior of thousands of proteins, simultaneously determining the thermal denaturation profiles of each protein. We report, in this study, TPP applied to a thermophilic bacterial proteome, a recently isolated strain of Geobacillus thermoleovorans named as ARTRW1. The proteome was investigated in terms of thermostable enzymes that are relevant to industrial applications. In this study, we present the thermostability profiles of its 868 proteins. The majority of G. thermoleovorans proteome was observed to melt between 62.5°C and 72°C, with melting point (Tm) mean value of 68.1°C ± 6.6°C. Unfolding characteristics of several enzymes, including amylase, protease, and lipase, were demonstrated which are highly informative in terms of their applicability to specific industrial processes. A significant correlation was observed between protein melting temperature and the structural features such as molecular weight and abundance, whereas correlations were modest or weak in relation to the α-helix structure percentages. Taken together, we demonstrated a system-wide melting profile analysis of a thermal proteome and listed proteins with elevated Tm values that are highly promising for applications in medicine, food engineering, and cosmetics in particular. The extracted Tm values were found similar to those obtained by biophysical methods applied to purified proteins. TPP analysis has significant industrial and biomedical potentials to accelerate thermophilic enzyme research and innovation.

Effects of Acute Moderate and Strenuous Exercise Bouts on IL-17 Production and Inflammatory Response in Trained Rats.

In this study, we aimed to compare the effects of a single bout of acute moderate and strenuous running exercise on the production of interleukin-17 (IL-17), interleukin-6 (IL-6), interleukin-1 receptor antagonist (IL-1ra) and inflammatory response of skeletal muscles in regularly trained rats. Eight week old rats were trained by treadmill running 5 days per week for 13 weeks at the durations of 30 min (moderate) and 60 min (strenuous). Two days after the last training session, the animals were subjected to a single bout of moderate or strenuous exercise and serum samples were analyzed for IL-17, IL-6, IL-1ra levels and myeloperoxidase (MPO) activity of gastrocnemius muscle were determined. IL-17 level significantly increased in strenuous exercise group when compared to that of sedentary controls (p < 0.01), On the other hand, only in the moderate exercise group, there was a negative correlation between IL-6 and IL-17 levels (r = - 0.857 and p = 0.014). In conclusion, acute single bout of strenuous exercise increased IL-17 production in trained rats and, this cytokine may be involved in inflammatory process of skeletal muscles. Key pointsA single bout of acute strenuous running exercise markedly elevated IL-17 production.This preliminary result should be supported by forthcoming studies that investigate the role of IL-17 in acute inflammatory process of skeletal muscle.

Potential surface alteration effects of laser-assisted periodontal surgery on existing dental restorations.

OBJECTIVE: Laser-assisted gingivectomies are performed in proximity to teeth, existing restorations, and implants. In case of accidental exposures, a detrimental surface defect may cause failure. Surface interactions should be evaluated for safety margin determination of certain laser-material combinations. The purpose of this in vitro study was to assess the microscopic and visible effects of CO2, Nd:YAG, and 810-nm diode laser irradiations on various dental materials and tooth tissue. METHOD AND MATERIALS: Study samples were fabricated (10 x 7.5 mm irradiation surface area, 1 mm thickness) from eight material groups (amalgam, base metal, gold, palladium-silver, composite, ceramic, titanium, and extracted tooth slices). Laser irradiations were performed with CO2, Nd:YAG, and 810-nm diode lasers using the manufacturer's recommended settings for gingivectomy at a 45-degree angle for 30 seconds. Irradiated surfaces were evaluated under SEM at 200x and 1,000x magnifications. Standardized photographs were obtained using a camera mount system (10x high-definition macro lens). The SEM images and photographs were correlated to determine surface interactions. RESULTS: Nd:YAG detrimentally affected all metallic materials and tooth structures. CO2 altered amalgam, gold, and palladium-silver slightly, whereas composite, ceramic, and tooth surfaces were detrimentally altered. The 810-nm diode altered amalgam, gold, titanium, palladium-silver, and composite but only gold and palladium-silver surfaces were barely traceable. CONCLUSION: Within the limitations of this in vitro study, surface effects were all instant; therefore, even a short accidental exposure may be destructive in some laser-material combinations. During gingivectomies, CO2 near tooth-colored restorations and Nd:YAG near metallic restorations and implants should be used carefully. The 810-nm diode was found to be safer due to its reversible alterations in only some materials. Further in vivo studies are necessary to clinically apply the outcomes of this study.

Resin cement color stability and its influence on the final shade of all-ceramics.

OBJECTIVES: Adhesive resin cements may go through internal discoloration, which may show-through and affect the appearance of translucent all-ceramic restorations. This in vitro study evaluated the amount of resin cement color change and its effect on the final shade of the all-ceramics. METHODS: Three different resin cements in both light and dual-cure forms were included in the study (Nexus-2/Kerr; Appeal/Ivoclar Vivadent; Calibra/Dentsply). All resin cements contained veneered (IPS Empress Esthetic, ETC1 shade, 20 mm × 1 mm ingot discs) and uncovered groups (n=10/group), all luted on white backgrounds (acetalpolyoxymethylene/Delrin(®)). Curing was performed according to ISO standards with a calibrated LED curing-light (Flashlite 1401). Samples were stored in 37°C distilled water at dark. Spectrophotometric baseline color measurements (Color Eye 7000A) were performed from the samples' top surfaces at 24h (D65 illuminator). Samples were subjected to 65 h of accelerated ageing (Atlas Ci4000). Further color measurements from the same areas were recorded in CIEL*a*b* coordinates where a ΔE data above 3 was accepted as visible discoloration (OptiviewLite-1.9software). Statistical analysis was performed using a nested random effects model and Tukey's post hoc analysis. RESULTS: Light-cure groups showed better color stability in all three resins but only in Appeal resin cement, the dual-cure group discolored significantly more (p<0.001). More discoloration was recorded on uncovered cement groups that represented the exposed cement at the margins. There was no visible color change (ΔE>3) through the ceramic surface on any veneered group. CONCLUSIONS: All resin cements showed varying degrees of discoloration after accelerated ageing however their actual color change was partially masked by the ceramic. Dual-cure resin cements may affect aesthetics on restoration margins if directly exposed.

Comparison of different finishing/polishing systems on surface roughness and gloss of resin composites.

OBJECTIVES: The aim of this study was to compare four finishing/polishing systems (F/P) on surface roughness and gloss of different resin composites. METHODS: A total of 40 disc samples (15 mm × 3 mm) were prepared from a nanofill - Filtek Supreme Plus (FS) and a micro-hybrid resin composite - Esthet-X (EX). Following 24h storage in 37°C water, the top surfaces of each sample were roughened using 120-grit sandpaper. Baseline measurements of surface roughness (Ra, µm) and gloss were recorded. Each composite group was divided into four F/P disk groups: Astropol[AP], Enhance/PoGo[EP], Sof-Lex[SL], and an experimental disk system, EXL-695[EXL] (n=5). The same operator finished/polished all samples. One sample from each group was evaluated under SEM. Another blinded-operator conducted postoperative measurements. Results were analysed by two-way ANOVA, two interactive MANOVA and Tukey's t-test (p<0.05). RESULTS: In surface roughness, the baseline of two composites differed significantly from each other whereas postoperatively there was no significance. The Sof-Lex F/P system provided the smoothest surface although there were no statistical significance differences between F/P systems (p>0.01). In gloss, FS composite with the EXL-695 system provided a significantly higher gloss (p<0.01). EX treated by Soflex revealed the least gloss (p<0.05). SEM images revealed comparable results for F/P systems but EX surfaces included more air pockets. CONCLUSIONS: Four different finishing/polishing systems provided comparable surface smoothness for both composites, whereas EXL with FS provided significantly higher gloss. SEM evaluations revealed that the EX surface contained more air pockets but F/P systems were compatible.

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

OBJECTIVES: The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. METHODS: Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P <.05). RESULTS: The smoothest surfaces were obtained under Mylar strip for all materials. While there were no significant differences in surface roughness of immediate and delayed finished/polished Dyract Extra samples, immediately finished/polished Venus and Grandio samples showed significantly higher roughness than the delayed polished samples (P <.05). In Tetric Flow samples, immediately finishing/polishing provided smoother surface than delayed finishing/polishing (P <.05). The highest gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P <.05), no differences were observed between delayed or immediate finishing/polishing for the other materials (P>.05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. CONCLUSIONS: The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

Plasma viscosity and mean platelet volume in patients undergoing coronary angiography.

BACKGROUND: Markers of platelet activation and haemorrheological indices have been demonstrated to play a role in the pathophysiology of atherosclerosis and cardiovascular events. In this study, we aimed at investigate the association between plasma viscosity and platelet indices in patients undergoing coronary angiography. MATERIALS AND METHODS: Three hundred and eighty four consecutive patients scheduled to undergo coronary angiography were included in the study. Prior to coronary angiography, blood samples were withdrawn to determine routine biochemical markers, blood cell analyses and viscosity measurements. According to the results of coronary angiography, patients were classified either in a subgroup with coronary artery disease (CAD; 1 or more stenoses >50%) or normal coronary arteries (NCA; no stenoses or <50%). RESULTS: There was a statistically significant correlation between plasma viscosity and mean platelet volume levels in all patients undergoing coronary angiography (r=0.199, p<0.001). Additionally, when correlation analysis was performed within each group, plasma viscosity significantly correlated with MPV both in patients with CAD (r=0.18, p=0.004) and in patients with NCAs (r=0.272, p=0.002). Linear regression analysis revealed that plasma viscosity was positively associated with MPV while platelet number was inversely but significantly associated with MPV. CONCLUSION: We have shown for the first time that MPV correlates with plasma viscosity in patients undergoing coronary angiography, suggesting a relation with plasma proteins and activation of circulating platelets or peripheral consumption of platelets. To evaluate this relation further controlled studies also in patients with acute coronary syndromes are warranted.