Assessing the Brain Death/Death by Neurologic Criteria Determination Process in Korea: Insights from 10-Year Noncompleted Donation Data.

BACKGROUND: This study aimed to analyze the current status of brain death/death by neurologic criteria (BD/DNC) determination in Korea over a decade, identifying key areas for improvement in the process. METHODS: We conducted a retrospective analysis of data from the Korea Organ Donation Agency spanning 2011 to 2021, focusing on donors whose donations were not completed. The study reviewed demographics, medical settings, diagnoses, and outcomes, with particular emphasis on cases classified as nonbrain death and those resulting in death by cardiac arrest during the BD/DNC assessment. RESULTS: Of the 5047 patients evaluated for potential brain death from 2011 to 2021, 361 were identified as noncompleted donors. The primary reasons for noncompletion included nonbrain death (n = 68, 18.8%), cardiac arrests during the BD/DNC assessment process (n = 80, 22.2%), organ ineligibility (n = 151, 41.8%), and logistical and legal challenges (n = 62, 17.2%). Notably, 25 (36.8%) of them failed to meet the minimum clinical criteria, and 7 of them were potential cases of disagreement between the two clinical examinations. Additionally, most cardiac arrests (n = 44, 55.0%) occurred between the first and second examinations, indicating management challenges in critically ill patients during the assessment period. CONCLUSIONS: Our study highlights significant challenges in the BD/DNC determination process, including the need for improved consistency in neurologic examinations and the management of critically ill patients. The study underscores the importance of refining protocols and training to enhance the accuracy and reliability of brain death assessments, while also ensuring streamlined and effective organ donation practices.

Highly flexible and transparent colorless polyimide substrate sandwiched between plasma polymerized fluorocarbon and InGaTiO for high performance flexible perovskite solar cells.

We integrated transparent antireflective coatings and transparent electrodes onto flexible colorless polyimide (CPI) substrates to fabricate high-performance flexible perovskite solar cells. Multifunctional PPFC/CPI/IGTO substrates were fabricated by sputtering the optimal plasma-polymerized fluorocarbon (PPFC) antireflective coating and InGaTiO (IGTO) electrode films on both sides of the CPI substrate. By applying PPFC with a low refractive index (1.38) as an antireflective coating, the transparency of the PPFC/CPI/IGTO substrate increased by an additional 1.2%. In addition, owing to the amorphous characteristics of the PPFC and IGTO layers, the PPFC/CPI/IGTO substrate showed constant sheet resistance and transmittance change even after 10,000 cycles during the bending tests. The flexible perovskite solar cells, fabricated on the PPFC/CPI/IGTO substrate, exhibited an increase in current density of 1.48 mA/cm2 after the deposition of the PPFC antireflective coating. These results confirmed that the PPFC/CPI/IGTO substrate was durable against high-temperature treatment, flexible, and exhibited excellent electrical characteristics. This enhanced the efficiency and durability of the flexible perovskite solar cells. Moreover, the hydrophobic PPFC layer allowed the self-cleaning of inflexible perovskite solar cells. Given these attributes, the PPFC/CPI/IGTO structure has been recognized as a good choice for multifunctional substrates of flexible perovskite solar cells, presenting the potential for enhancing performance.

We have confirmed the durability of PPFC/CPI/IGTO substrates against high-temperature treatment, their flexibility, transparency, and their exceptional electrical properties, suggesting them as a prime selection for FPSCs.

High Mobility Group Box 1 as an Autocrine Chemoattractant for Oligodendrocyte Lineage Cells in White Matter Stroke.

BACKGROUND: The migration of oligodendrocyte precursor cells (OPC) is a key process of remyelination, which is essential for the treatment of white matter stroke. This study aimed to investigate the role of HMGB1 (high mobility group box 1), a damage-associated molecular pattern released from dying oligodendrocytes, as an autocrine chemoattractant that promotes OPC migration. METHODS: The migratory capacity of primary cultured OPCs was measured using the Boyden chamber assay. The downstream pathway of HMGB1-mediated OPC migration was specified by siRNA-induced knockdown or pharmacological blockade of TLR2 (toll-like receptor 2), RAGE (receptor for advanced glycation end product), Src, ERK1/2 (extracellular signal-regulated kinase1/2), and FAK (focal adhesion kinase). Conditioned media were collected from oxygen-glucose deprivation-treated oligodendrocytes, and the impact on OPC migration was assessed. Lesion size and number of intralesional Olig2(+) cells were analyzed in an in vivo model of white matter stroke with N5-(1-iminoethyl)-L-ornithine (L-NIO). RESULTS: HMGB1 treatment promoted OPC migration. HMGB1 antagonism reversed such effects to untreated levels. Among the candidates for the downstream signal of HMGB1-mediated migration, the knockdown of TLR2 rather than that of RAGE attenuated the migration-promoting effect of HMGB1. Further specification of the HMGB1-TLR2 axis revealed that the phosphorylation of ERK1/2 and its downstream molecule FAK, rather than of Src, was decreased in TLR2-knockdown OPCs, and pharmacological inhibition of ERK1/2 and FAK led to decreased OPC migration. Oxygen-glucose deprivation-conditioned media promoted OPC migration, suggesting the autocrine chemoattractant function of HMGB1. In vivo, TLR2(-/-)-mice showed lesser intralesional Olig2(+) cells compared to wild-type controls in response to L-NIO induced ischemic injury regardless of HMGB1 administration. CONCLUSIONS: HMGB1, through the TLR2-ERK1/2-FAK axis, functions as an autocrine chemoattractant to promote OPC migration, which is an initial and indispensable step in remyelination. Thus, a novel treatment strategy for white matter stroke based on the HMGB1-TLR2 axis in the oligodendrocyte lineage could be feasible.

Area-Selective Chemical Doping on Solution-Processed MoS2 Thin-Film for Multi-Valued Logic Gates.

Multi-valued logic gates are demonstrated on solution-processed molybdenum disulfide (MoS2) thin films. A simple chemical doping process is added to the conventional transistor fabrication procedure to locally increase the work function of MoS2 by decreasing sulfur vacancies. The resulting device exhibits pseudo-heterojunctions comprising as-processed MoS2 and chemically treated MoS2 (c-MoS2). The energy-band misalignment of MoS2 and c-MoS2 results in a sequential activation of the MoS2 and c-MoS2 channel areas under a gate voltage sweep, which generates a stable intermediate state for ternary operation. Current levels and turn-on voltages for each state can be tuned by modulating the device geometries, including the channel thickness and length. The optimized ternary transistors are incorporated to demonstrate various ternary logic gates, including the inverter, NMIN, and NMAX gates.

Active Control of Irreversible Faradic Reactions to Enhance the Performance of Reverse Electrodialysis for Energy Production from Salinity Gradients.

Irreversible faradic reactions in reverse electrodialysis (RED) are an emerging concern for scale-up, reducing the overall performance of RED and producing environmentally harmful chemical species. Capacitive RED (CRED) has the potential to generate electricity without the necessity of irreversible faradic reactions. However, there is a critical knowledge gap in the fundamental understanding of the effects of operational stack voltages of CRED on irreversible faradic reactions and the performance of CRED. This study aims to develop an active control strategy to avoid irreversible faradic reactions and pH change in CRED, focusing on the effects of a stack voltage (0.9-5.0 V) on irreversible faradic reactions and power generation. Results show that increasing the initial output voltage of CRED by increasing a stack voltage has an insignificant impact on irreversible faradic reactions, regardless of the stack voltage applied, but a cutoff output voltage of CRED is mainly responsible for controlling irreversible faradic reactions. The CRED system with eliminating irreversible faradic reactions achieved a maximum power density (1.6 W m-2) from synthetic seawater (0.513 M NaCl) and freshwater (0.004 M NaCl). This work suggests that the control of irreversible faradic reactions in CRED can provide stable power generation using salinity gradients in large-scale operations.

Highly flexible Ag nanowire network covered by a graphene oxide nanosheet for high-performance flexible electronics and anti-bacterial applications.

We investigated a flexible and transparent conductive electrode (FTCE) based on Ag nanowires (AgNWs) and a graphene oxide (GO) nanosheet and fabricated through a simple and cost-effective spray coating method. The AgNWs/GO hybrid FTCE was optimized by adjusting the nozzle-to-substrate distance, spray speed, compressor pressure, and volume of the GO solution. The optimal AgNWs/GO hybrid FTCE has a high transmittance of 88% at a wavelength of 550 nm and a low sheet resistance of 20 Ohm/square. We demonstrate the presence of the GO nanosheet on the AgNWs through Raman spectroscopy. Using scanning electron microscopy and atomic force microscopy, we confirmed that the nanosheet acted as a conducting bridge between AgNWs and improved the surface morphology and roughness of the electrode. Effective coverage by the GO sheet improved the conductivity of the AgNWs electrode Effective coverage of the GO sheet improved conductivity of the AgNWs electrode with minimum degradation of optical and mechanical properties. Flexible thin film heater (TFH) and electroluminescent (EL) devices fabricated on AgNWs/GO hybrid FTCEs showed better performance than devices on bare AgNWs electrodes due to lower sheet resistance and uniform conductivity. In addition, an AgNWs/GO electrode layer on a facial mask acts as a self-heating and antibacterial coating. A facial mask with an AgNWs/GO electrode showed a bacteriostatic reduction rate of 99.7 against Staphylococcus aureus and Klebsiella pneumonia.

High-performance flexible transparent micro-supercapacitors from nanocomposite electrodes encapsulated with solution processed MoS2 nanosheets.

Two-dimensional molybdenum disulfide (MoS2) nanosheets have emerged as a promising material for transparent, flexible micro-supercapacitors, but their use in electrodes is hindered by their poor electrical conductivity and cycling stability because of restacking. In this paper, we report a novel electrode architecture to exploit electrochemical activity of MoS2 nanosheets. Electrochemically exfoliated MoS2 dispersion was spin coated on mesh-like silver networks encapsulated with a flexible conducting film exhibiting a pseudocapacitive behavior. MoS2 nanosheets were electrochemically active over the whole electrode surface and the conductive layer provided a pathway to transport electrons between the MoS2 and the electrolyte. As the result, the composite electrode achieved a large areal capacitance (89.44 mF cm-2 at 6 mA cm-2) and high energy and power densities (12.42 µWh cm-2 and P = 6043 µW cm-2 at 6 mA cm-2) in a symmetric cell configuration with 3 M KOH solution while exhibiting a high optical transmittance of ~80%. Because the system was stable against mechanical bending and charge/discharge cycles, a flexible micro-supercapacitor that can power electronics at different bending states was realized.

Thermally-evaporated C60/Ag/C60 multilayer electrodes for semi-transparent perovskite photovoltaics and thin film heaters.

We investigated the characteristics of thermally evaporated fullerene (C60)/Ag/C60 (CAC) multilayer films for use in semi-transparent perovskite solar cells (PSCs) and thin-film heaters (TFHs). The top and bottom C60 layers and Ag interlayer were prepared using multi-source thermal evaporation, and the thickness of the Ag interlayer was investigated in detail for its effects on the resistivity, optical transmittance, and mechanical properties of the CAC electrodes. We used a figure-of-merit analysis to obtain a CAC electrode with a smooth surface morphology that exhibited a sheet resistance of 5.63 Ohm/square and an optical transmittance of 66.13% at a 550 nm wavelength. We conducted mechanical deformation tests to confirm that the thermally evaporated multilayer CAC electrode has a high durability, even after 10,000 times of inner and outer bending, rolling, and twisting due to the flexibility of the amorphous C60 and Ag interlayer. We evaluated the feasibility of using CAC electrodes for semi-transparent PSCs and TFHs. The semi-transparent PSC with 1.08 cm2 active area prepared with a transparent multilayer CAC cathode showed a power conversion efficiency (PCE) of 5.1%. Furthermore, flexible TFHs (2.5 × 2.5 cm2) fabricated on a thermally evaporated CAC electrode show a high saturation temperature of 116.6 C, even at a low input voltage of 4.5 V, due to a very low sheet resistance. Based on the performance of the PSCs and TFHs, we conclude that the thermally evaporated multilayer CAC electrode is promising for use as a transparent conductive electrode (TCE) for semi-transparent PSCs and TFHs, with characteristics comparable to sputtered TCEs.

ZnO:Ga-graded ITO electrodes to control interface between PCBM and ITO in planar perovskite solar cells.

Ga-doped ZnO (GZO)-graded layer, facilitating electron extraction from electron transport layer, was integrated on the surface of transparent indium tin oxide (ITO) cathode by using graded sputtering technique to improve the performance of planar n-i-p perovskite solar cells (PSCs). The thickness of graded GZO layer was controlled to optimize GZO-indium tin oxide (ITO) combined electrode for planar n-i-p PSCs. At optimized graded thickness of 15 nm, the GZO-ITO combined electrode showed an optical transmittance of 95%, a resistivity of 2.3 × 10-4 Ohm cm, a sheet resistance of 15.6 Ohm/square, and work function of 4.23 eV, which is well matched with the 4.0-eV lowest unoccupied molecular orbital of [6,6]-phenyl-C61-butyric acid methyl ester. Owing to enhanced extraction of electron by the graded GZO, the n-i-p PSC with GZO-ITO combined electrode showed higher power conversion efficiency (PCE) of 9.67% than the PCE (5.25%) of PSC with only ITO electrode without GZO-graded layer. In addition, the GZO integrated-ITO electrode acts as transparent electrode and electron extraction layer simultaneously due to graded mixing of the GZO at the surface region of ITO electrode.

Tetrahedral amorphous carbon prepared filter cathodic vacuum arc for hole transport layers in perovskite solar cells and quantum dots LEDs.

(ta-C) films coated through the filtered cathodic vacuum arc (FCVA) process as a hole transport layer (HTL) for perovskite solar cells (PSCs) and quantum dot light-emitting diodes (QDLEDs). The p-type ta-C film has several remarkable features, including ease of fabrication without the need for thermal annealing, reasonable electrical conductivity, optical transmittance, and a high work function. X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy examinations show that the electrical properties (sp3/sp2 hybridized bond) and work function of the ta-C HTL are appropriate for PSCs and QDLEDs. In addition, in order to correlate the performance of the devices, the optical, surface morphological, and structural properties of the FCVA-grown ta-C films with different thicknesses (5 ~ 20 nm) deposited on the ITO anode are investigated in detail. The optimized ta-C film with a thickness of 5 nm deposited on the ITO anode had a sheet resistance of 10.33 Ω-2, a resistivity of 1.34 × 10-4 Ω cm, and an optical transmittance of 88.97%. Compared to the reference PSC with p-NiO HTL, the PSC with 5 nm thick ta-C HTL yielded a higher power conversion efficiency (PCE, 10.53%) due to its improved fill factor. Further, the performance of QDLEDs with 5 nm thick ta-C hole injection layers (HIL) showed better than the performance of QDLEDs with different ta-C thicknesses. It is concluded that ta-C films have the potential to serve as HTL and HIL in next-generation PSCs and QDLEDs.

Fabrication of an Anion-Exchange Membrane by Pore-Filling Using Catechol-1,4-Diazabicyclo-[2,2,2]octane Coating and Its Application to Reverse Electrodialysis.

We have successfully exploited the Michael-type addition reaction between catechol and DABCO (1,4-diazabicyclo-[2,2,2]octane) molecules under alkaline conditions for the formation of new quaternary ammonium (QA) groups in an anion-exchange membrane. The anion-exchange membranes (AEMs) were prepared using the pore-filling method by addition of electrolytes (vinyl benzyl trimethylammonium chloride (VBTMA), dopamine methacrylamide (DMA) bearing a catechol group, and ethylene glycol diacrylate as a cross-linker) to a porous substrate. The formation of new QA groups by the reaction of DABCO with catechol components was confirmed by characterization of new peaks in the Fourier transform infrared spectra of the AEMs. The DABCO-bound AEM demonstrated a significant decrease in area resistance (0.4 Ω·cm2) and increase in permselectivity (94%). Furthermore, the electrochemical properties of the AEMs could be controlled by altering the concentrations of VBTMA and DMA and the formation of new bonds between DMA and DABCO. The calculated theoretical (4.31 W/m2) and practical (1.52 W/m2) power densities during a reverse electrodialysis (RED) process employing the membrane with the best properties (E2C1-DMA0.5-DABCO) were by 33 and 18% higher than those of a system utilizing a commercial membrane, Neosepta AMX (3.25 and 1.29 W/m2). Therefore, the AEM synthesized in this study is a good candidate for use in RED applications.

High-performance, transparent, and stretchable electrodes using graphene-metal nanowire hybrid structures.

Transparent electrodes that can remain electrically conductive and stable under large mechanical deformations are highly desirable for applications in flexible and wearable electronics. This paper describes a comprehensive study of the electrical, optical, and mechanical properties of hybrid nanostructures based on two-dimensional graphene and networks of one-dimensional metal nanowires, and their use as transparent and stretchable electrodes. Low sheet resistance (33 Ω/sq) with high transmittance (94% in visible range), robust stability against electric breakdown and oxidation, and superb flexibility (27% in bending strain) and stretchability (100% in tensile strain) are observed, and these multiple functionalities of the hybrid structures suggest a future promise for next generation electronics. The use of hybrid electrodes to fabricate oxide semiconductor transistors and single-pixel displays integrated on wearable soft contact lenses with in vivo tests are demonstrated.

Multicoated Flexible Indium Tin Oxide Electrodes Fabricated Using Magnetron Sputtering and Arc Plasma Ion Plating for Flexible Perovskite Solar Cells.

High-performance flexible Sn-doped In2O3 (indium tin oxide, ITO) electrodes were fabricated using a multicoating process on colorless polyimide (CPI) substrates for flexible perovskite solar cells (FPSCs). The effects of different coating sequences on the electrical, optical, and mechanical properties of the flexible ITO electrodes were thoroughly investigated after preparing them with direct-current magnetron sputtering (DMS) and arc plasma ion plating (APIP). Although both the sputtered ITO (SITO)/arc ion-plated ITO (AITO) film and the AITO/SITO film showed similarly low sheet resistance (18.69-25.29 Ω/sq) and high optical transmittance (94.96-96.85%), the coating sequence significantly affected the mechanical flexibility of the multicoated ITO films. The 120 nm-thick SITO/AITO electrode exhibited small outer and inner critical bending radii (3 mm and 3 mm, respectively) compared to the AITO/SITO electrode (4 and 5 mm, respectively). Owing to better adhesion of the arc-ion-plated ITO bottom layer and the amorphous structure of the top SITO layer, the SITO/AITO electrode exhibited excellent mechanical flexibility and durability. In addition, an FPSC using the SITO/AITO electrode achieved a higher power conversion efficiency (15.09%) than that with the AITO/SITO electrode (13.22%). This improvement was attributed to its high transmittance, low sheet resistance, smooth surface morphology, and enhanced hole collection efficiency. These findings highlight the efficacy of the combined DMS and APIP multicoating process for fabricating high-quality flexible ITO electrodes for high-performance FPSCs.

Benchtop and in Vitro Experiments of Novel Transform Stents for Trigeminal Neuralgia Treatment.

BACKGROUND: Trigeminal neuralgia (TN) is a debilitating condition characterized by sudden, excruciating facial pain due to neurovascular compression of the trigeminal nerve. Stent deployment can change the course of the superior cerebellar artery upwards, possibly releasing the root entry zone of the trigeminal nerve. We developed a novel stent, the Transform stent, for TN treatment, and evaluated its mechanical properties using benchtop and in vitro hemocompatibility tests. METHODS: We compared the performance of Transform and Enterprise stents in treating TN because they share similar self-expanding closed-cell features in the manufacturing process, are derived from nitinol tubes, and are fabricated through a laser-cutting process, but also because only the safety of Enterprise stents deployed in intracranial arteries has been reported clinically. All benchtop measurements, including radial force, trackability, bending stiffness, and conformability, were performed thrice for each stent model, and their average values are presented. RESULTS: Transform stents showed higher radial forces in vessels of diameters ranging from 1.0 mm than Enterprise stents. The trackability of the Transform stent was better than that of the Enterprise stent in a neurovascular model. Bending stiffness was stronger in the Transform stent whereas conformability was superior in the Enterprise stent. No significant thrombogenic issues were observed in the in vitro hemocompatibility tests. CONCLUSIONS: This study demonstrated the Transform stent as a potential option and paved the way for innovative endovascular approaches for the future TN treatment. Namely, the study confirmed that the characteristics of Transform stents at benchtop and in vitro evaluations may be used as a first step for studies such as in vivo pre- and clinical studies.

Solvent-free preparation and thermocompression self-assembly: an exploration of performance improvement strategies for perovskite solar cells.

Perovskite solar cells (PSCs) exhibit sufficient technological efficiency and economic competitiveness. However, their poor stability and scalability are crucial factors limiting their rapid development. Therefore, achieving both high efficiency and good stability is an urgent challenge. In addition, the preparation methods for PSCs are currently limited to laboratory-scale methods, so their commercialization requires further research. Effective packaging technology is essential to protect the PSCs from degradation by external environmental factors and ensure their long-term stability. The industrialization of PSCs is also inseparable from the preparation technology of perovskite thin films. This review discusses the solvent-free preparation of PSCs, shedding light on the factors that affect PSC performance and strategies for performance enhancement. Furthermore, this review analyzes the existing simulation techniques that have contributed to a better understanding of the interfacial evolution of PSCs during the packaging process. Finally, the current challenges and possible solutions are highlighted, providing insights to facilitate the development of highly efficient and stable PSC modules to promote their widespread application.

Safety and efficacy of the novel Alpha stent for the treatment of intracranial wide-necked aneurysm.

The Alpha stent is an intracranial closed-cell stent with a unique mesh design to enhance wall apposition. It recently underwent structural modifications to facilitate easier stent deployment. This study aimed to evaluate the safety and efficacy of stent-assisted coil embolization for unruptured intracranial aneurysms using the Alpha stent. Between January 2021 and November 2021, 35 adult patients with 35 unruptured intracranial aneurysms in the distal internal carotid artery were prospectively enrolled. For efficacy outcomes, magnetic resonance angiography at the 6-month follow-up was evaluated using the Raymond-Roy occlusion classification (RROC). The safety outcome evaluated the occurrence of symptomatic procedure-related neurological complications up to 6 months postoperatively. Technical success was achieved in 34/35 (97.1%). Six months postoperatively, aneurysm occlusion showed RROC I in 32/35 (91.4%) and RROC II in 3/35 (8.6%) patients. Procedure-related neurologic complications occurred in one patient (2.9%) who experienced hemiparesis due to acute lacunar infarction, which resulted in a 6-month mRS score of 1. The Alpha stent demonstrated excellent efficacy and safety outcomes in stent-assisted coil embolization of unruptured distal ICA aneurysms. The recent structural modifications allowed for easier stent delivery and deployment.Clinical trial registration number: KCT0005841; registration date: 28/01/2021.

A primary culture method for the easy, efficient, and effective acquisition of oligodendrocyte lineage cells from neonatal rodent brains.

Oligodendrocytes (OL) are myelin-forming glial cells in the central nervous system. In vitro primary OL culture models offer the benefit of a more readily controlled environment that facilitates the examination of diverse OL stages and their intricate dynamics. Although conventional methods for primary OL culture exist, their performance in terms of simplicity and efficiency can be improved. Here, we introduce a novel method for primary OL culture, namely the E3 (easy, efficient, and effective) method, which greatly improves the simplicity and efficiency of the primary OL culture procedure using neonatal rodent brains. We also provided the optimal media composition for the augmentation of oligodendrocyte progenitor cell (OPC) proliferation and more robust maturation into myelin-forming OLs. Overall, E3 offers an undemanding method for obtaining primary OLs with high yield and quality. Alongside its value as a practical tool, in vitro characteristics of the OL lineage additionally identified during the development of the E3 method have implications for advancing research on OL physiology and pathophysiology.

Analysis of the spatial and morphological characteristics of oligodendrocytes from images of in vitro culture.

Oligodendrocytes (OLs) are glial cells responsible for the formation of myelin sheaths in the central nervous system. The characteristic features of the oligodendrocyte lineage, ranging from proliferative and migratory oligodendrocyte progenitor cells (OPC) to myelinating mature OLs, can be observed in vitro cultures of OL lineage cells. Here, we introduce a method for analyzing the spatial distribution of OPCs, which reflects their capacity for proliferation and migration, and the morphological complexity of mature OLs, which reflects their capacity for myelin formation, from immunostaining images of in vitro OL cultures. Through the methods described, we have demonstrated the tendency for OPCs to cluster in an environment with epidermal growth factor (EGF), and the differing morphological complexity of mature OLs according to culture medium and duration of differentiation.•The proliferative and migratory characteristics of OPCs can be evaluated by analyzing their spatial distribution.•The myelin-forming capacity of mature OLs can be measured by analyzing their morphological complexity.•Image-based analyses may be a substitute for more convoluted experiments to assess OL function.

Protocol for the acquisition and maturation of oligodendrocytes from neonatal rodent brains.

The generation of an oligodendrocyte primary culture model encompassing the diverse stages of the lineage is essential for the in vitro research of oligodendrocyte physiology and pathophysiology. Here, we provide a protocol for generating oligodendrocytes from the neonatal rodent brain. We describe steps for isolating oligodendrocyte progenitor cells (OPCs) through differential centrifugation, their subsequent expansion, passaging, and differentiation. For complete details on the use and execution of this protocol, please refer to Kim et al.1.

Mechanical and electromagnetic interference shielding Properties of poly(vinyl alcohol)/graphene and poly(vinyl alcohol)/multi-walled carbon nanotube composite nanofiber mats and the effect of Cu top-layer coating.

We report the mechanical property and electromagnetic interference shielding effectiveness (EMI SE) of poly(vinyl alcohol) (PVA)/graphene and PVA/multi-walled carbon nanotube (MWCNT) composite nanofibers prepared by electrospinning. The metal (Cu) was deposited on the resultant PVA composite nanofibers using metal deposition technique in order to improve the mechanical properties and EMI shielding properties. The resulting PVA composite nanofibers and Cu-deposited corresponding nanofibers were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and wide angle X-ray diffraction (WAXD). Tensile tests were performed on the PVA/graphene and PVA/MWCNT composite nanofibers. The tensile strength of the PVA/graphene and PVA/MWCNT composite nanofibers was found to be 19.2 +/- 0.3 MPa at graphene content - 6.0 wt% and 12.2 +/- 0.2 MPa at MWCNT content - 3.0 wt%, respectively. The EMI SE of the Cu-deposited PVA/graphene composite nanofibers was significantly improved compared to pure PVA/graphene composite nanofibers, and also depended on the thickness of Cu metal layer deposited on the PVA composite nanofibers.