Specific wavelength peak emulation with amorphous metastructures.

The conventional design process for metasurfaces is time-consuming and computationally expensive. To address this challenge, we utilize a deep convolutional generative adversarial network (DCGAN) to generate new nanohole metastructure designs that match a desired transmittance spectrum in the visible range. The trained DCGAN model demonstrates an exceptional performance in generating diverse and manufacturable metastructure designs that closely resemble the target optical properties. The proposed method provides several advantages over existing approaches. These include its capability to generate new designs without prior knowledge or assumptions regarding the relationship between metastructure geometries and optical properties, its high efficiency, and its generalizability to other types of metamaterials. The successful fabrication and experimental characterization of the predicted metastructures further validate the accuracy and effectiveness of our proposed method.

Resolution-enhanced optical inspection system to examine metallic nanostructures using structured illumination.

We developed a structured illumination-based optical inspection system to inspect metallic nanostructures in real time. To address this, we used post-image-processing techniques to enhance the image resolution. To examine the fabricated metallic nanostructures in real time, a compact and highly resolved optical inspection system was designed for practical industrial use. Structured illumination microscopy yields multiple images with various linear illumination patterns, which can be used to reconstruct resolution-enhanced images. Images of nanosized posts and complex structures reflected in the structured illumination were reconstructed into images with improved resolution. A comparison with wide-field images demonstrates that the optical inspection system exhibits high performance and is available as a real-time nanostructure inspection platform. Because it does not require special environmental conditions and enables multiple systems to be covered in arrays, the developed system is expected to provide real-time and noninvasive inspections during the production of large-area nanostructured components.

Fiber-Optic Localized Surface Plasmon Resonance Sensors Based on Nanomaterials.

Applying fiber-optics on surface plasmon resonance (SPR) sensors is aimed at practical usability over conventional SPR sensors. Recently, field localization techniques using nanostructures or nanoparticles have been investigated on optical fibers for further sensitivity enhancement and significant target selectivity. In this review article, we explored varied recent research approaches of fiber-optics based localized surface plasmon resonance (LSPR) sensors. The article contains interesting experimental results using fiber-optic LSPR sensors for three different application categories: (1) chemical reactions measurements, (2) physical properties measurements, and (3) biological events monitoring. In addition, novel techniques which can create synergy combined with fiber-optic LSPR sensors were introduced. The review article suggests fiber-optic LSPR sensors have lots of potential for measurements of varied targets with high sensitivity. Moreover, the previous results show that the sensitivity enhancements which can be applied with creative varied plasmonic nanomaterials make it possible to detect minute changes including quick chemical reactions and tiny molecular activities.

Experimental confirmation of plasmonic field cancellation under specific conditions of trapezoidal nanopatterns.

In this study, we investigated plasmonic field localization with trapezoidal nanopatterns under normal incident light excitation to find optimum structures for sensing and imaging. A finite element method was used to calculate the fundamental characteristics of the localized surface plasmon with varied trapezoidal nanopatterns. First, we describe how to localize the plasmonic fields on the trapezoidal patterns and then report our results from the investigation of the optimum properties of the nanopatterns for maximized field intensity. Initially, we expected that maximized field localization would lead to enhancement of the sensing sensitivity or imaging resolution in plasmon-based sensing and imaging systems. However, more interestingly, we found a field cancellation effect under specific modality conditions through the simulation. Thus, we thoroughly investigated the principle of the effect and extracted the modality conditions that induced field cancellation. In addition, specific modality conditions of nanopatterns that could be fabricated with conventional lithographic methods were numerically determined. Then, the field cancellation effect was experimentally verified using scanning nearfield optical microscopy. The results indicate that trapezoidal nanopatterns bring about enhanced field localization at the shaper edge of nanopatterns than do conventional rectangular nanopatterns and that plasmonic field cancellation can be observed under specific modality conditions of nanopatterns, even for conventional rectangular nanopatterns. Thus, it is suggested that careful fabrication and maintenance are needed to obtain strong plasmonic localization. Finally, the feasibility of providing a novel sensing platform using the field cancellation effect is suggested.

A Localized Surface Plasmon Resonance Sensor Using Double-Metal-Complex Nanostructures and a Review of Recent Approaches.

From active developments and applications of various devices to acquire outside and inside information and to operate based on feedback from that information, the sensor market is growing rapidly. In accordance to this trend, the surface plasmon resonance (SPR) sensor, an optical sensor, has been actively developed for high-sensitivity real-time detection. In this study, the fundamentals of SPR sensors and recent approaches for enhancing sensing performance are reported. In the section on the fundamentals of SPR sensors, a brief description of surface plasmon phenomena, SPR, SPR-based sensing applications, and several configuration types of SPR sensors are introduced. In addition, advanced nanotechnology- and nanofabrication-based techniques for improving the sensing performance of SPR sensors are proposed: (1) localized SPR (LSPR) using nanostructures or nanoparticles; (2) long-range SPR (LRSPR); and (3) double-metal-layer SPR sensors for additional performance improvements. Consequently, a high-sensitivity, high-biocompatibility SPR sensor method is suggested. Moreover, we briefly describe issues (miniaturization and communication technology integration) for future SPR sensors.

Determinants of wearer satisfaction factors for harnesses in upper-limb assistive wearable robots.

Wearable robots are increasingly being deployed for use in industrial fields. However, only a few studies have focused on the usability of wearable robots. The present study evaluated the factors affecting the usability of a harness in securing a wearable robot to the body because the harness directly affects the work efficiency, and thus its design and use require careful consideration. A comparative evaluation of the arrangement of the Vest Exoskeleton before and after improvements was conducted, in which participants performed a benchmark assembly task while wearing the robot. Results showed that wearability decreased after the improvements due to the additional straps and buckles used, but the overall wearing satisfaction improved as a result of increased stability. Stability and convenience were the main factors affecting the overall wearing satisfaction, while sub-indicators included wearing comfort and tactile sensation. Therefore, improvements in stability, such as those related to fixation strength and tactile sensation, had a direct positive impact on the overall wearing satisfaction.

On-site detection of methicillin-resistant Staphylococcus aureus (MRSA) utilizing G-quadruplex based isothermal exponential amplification reaction (GQ-EXPAR).

Methicillin-resistant Staphylococcus aureus (MRSA) has a high incidence in infectious hospitals and communities, highlighting the need for early on-site detection due to its resistance to methicillin antibiotics. The present study introduces a highly sensitive detection system for mecA, a crucial methicillin marker, utilizing an RCA-based isothermal exponential amplification reaction. The G-quadruplex-based isothermal exponential amplification reaction (GQ-EXPAR) method designs probes to establish G-quadruplex secondary structures incorporating thioflavin T for fluorescence. The system, unlike conventional genetic detection methods, works with portable isothermal PCR devices (isoQuark), facilitating on-site detection. A detection limit of 0.1 fmol was demonstrated using synthetic DNA, and effective detection was proven using thermal lysis. The study also validated the detection of targets swabbed from surfaces within bacterial 3D nanostructures using the GQ-EXPAR method. After applying complementary sequences to the padlock probe for the target, the GQ-EXPAR method can be used on various targets. The developed method could facilitate rapid and accurate diagnostics within MRSA strains.

Plasmonic Nanopillars-A Brief Investigation of Fabrication Techniques and Biological Applications.

Nanopillars (NPs) are submicron-sized pillars composed of dielectrics, semiconductors, or metals. They have been employed to develop advanced optical components such as solar cells, light-emitting diodes, and biophotonic devices. To integrate localized surface plasmon resonance (LSPR) with NPs, plasmonic NPs consisting of dielectric nanoscale pillars with metal capping have been developed and used for plasmonic optical sensing and imaging applications. In this study, we studied plasmonic NPs in terms of their fabrication techniques and applications in biophotonics. We briefly described three methods for fabricating NPs, namely etching, nanoimprinting, and growing NPs on a substrate. Furthermore, we explored the role of metal capping in plasmonic enhancement. Then, we presented the biophotonic applications of high-sensitivity LSPR sensors, enhanced Raman spectroscopy, and high-resolution plasmonic optical imaging. After exploring plasmonic NPs, we determined that they had sufficient potential for advanced biophotonic instruments and biomedical applications.

Quantitative comparison of EGFR expression levels of optically trapped individual cells using a capacitance biosensor.

Cellular endocytosis is an essential phenomenon which induces cellular reactions, such as waste removal, nutrient absorption, and drug delivery, in the process of cell growth, division, and proliferation. To observe capacitance responses upon endocytosis on a single-cell scale, this study combined an optical tweezer that can optically place a single cell on a desired location with a capacitance sensor and a cell incubation chamber. Single HeLa cancer cell was captured and moved to a desired location through optical trapping, and the single-cell capacitance change generated during the epidermal growth factor (EGF) molecule endocytosis was measured in real time. It was found that single HeLa cells showed a larger increase in capacitance values compared to that of the single NIH3T3 cells when exposed to varying EGF concentrations. In addition, the capacitance change was in proportion to the cell's EGF receptor (EGFR) level when cells of different levels of EGFR expression were tested. An equation derived from these results was able to estimate the EGFR expression level of a blind-tested cell. The biosensor developed in this research can not only quickly move a single cell to a desired location in a non-invasive manner but also distinguish specific responses between cancer and normal cells by continuous measurement of real-time interactions of a single cell in culture to the external ligands.

Correction: Investigation of craquelure patterns in oil paintings using precise 3D morphological analysis for art authentication.

[This corrects the article DOI: 10.1371/journal.pone.0272078.].

Nanoscale localization sampling based on nanoantenna arrays for super-resolution imaging of fluorescent monomers on sliding microtubules.

Sub-diffraction-limited imaging of fluorescent monomers on sliding microtubules in vitro by nanoscale localization sampling (NLS) is reported. NLS is based on periodic nanohole antenna arrays that create locally amplified electromagnetic hot spots through surface plasmon localization. The localized near-field hot spot temporally samples microtubular movement for enhanced spatial resolution. A fourfold improvement in spatial resolution compared to conventional wide-field microscopy is demonstrated. The resolution enhancement is achieved by imaging rhodamine-labeled microtubules that are sampled by the hot spots to provide sub-diffraction-limited images at 76 nm resolution in the direction of movement and 135 nm orthogonally. The intensity distribution produced by the NLS is measured to be broader than that of conventional imaging, which is consistent with the improvement of imaging resolution. Correlation studies between neighboring nanoantennas are also performed. This confirms the possibility of measuring microtubular transport dynamics. NLS can be useful for moving objects that have a high labeling density or for performing fluctuation spectroscopy in small volumes, and may allow "super-resolution on demand" by customizing nanoantenna structures for specific resolution needs.

Investigation of craquelure patterns in oil paintings using precise 3D morphological analysis for art authentication.

The development of scientific technology for art authentication has elicited multidimensional evidence to distinguish forgeries from original artwork. Here, we analyzed the three-dimensional morphology of cracks that contain information, such as the painting features of artworks, using optical coherence tomography. The forgeries were produced by an expert from original oil paintings with cracks that occur owing to paint drying, canvas aging, and physical damage. Parameters, such as shape, width, and depth, were compared based on the cross-sectional images of the original and fake cracks. The original cracks were rectangular and inverted, but the fake cracks were relatively simple inverted triangles. The original cracks were as deep as the thickness of the upper layer and mostly were "thin/deep" or "wide/shallow". The fake cracks were observed to be "'thin/shallow" or "wide/deep". This study aims to improve the understanding of crack characteristics and promote the development of techniques for determining art authenticity.

Isothermal amplification-mediated lateral flow biosensors for in vitro diagnosis of gastric cancer-related microRNAs.

MicroRNAs (miRNAs) are important diagnostic and prognostic biomarkers for various tumors. Currently, many diagnostic systems have been developed to detect miRNAs, but simple techniques for detecting miRNAs are still required. Recently, we reported that the expression of miRNA-135b is upregulated in gastric epithelial cells during gastric inflammation and carcinogenesis. Our aim was to develop an in vitro diagnostic platform to analyze the expression of gastric cancer-related biomarkers in the blood. The diagnostic platform comprised an isothermal amplification-based lateral flow biosensor (IA-LFB) that enables easy diagnosis of gastric cancer through visual observation. In this platform, trace amounts of biomarkers are isothermally amplified through rolling circle amplification (RCA), and the amplified product is grafted to the LFB. The performance of the IA-LFB was confirmed using RNAs extracted from in vitro and in vivo models. The platform could detect target miRNAs within 3 h with excellent sensitivity and selectivity. In particular, the IA-LFB could detect the overexpression of gastric cancer-related markers (miRNA-135b and miRNA-21) in RNAs extracted from the blood of patients with various stages (stages 1-4) of gastric cancer compared to that in healthy volunteers. Therefore, IA-LFB is a simple and sensitive in vitro diagnostic system for detecting gastric cancer-related biomarkers and can contribute to the early diagnosis and prognosis monitoring of gastric cancer. Furthermore, this technology can be applied to systems that can detect multiple biomarkers related to various diseases (such as infectious and genetic diseases).

Plasmonic sensing, imaging, and stimulation techniques for neuron studies.

Studies to understand the structure, functions, and electrophysiological properties of neurons have been conducted at the frontmost end of neuroscience. Such studies have led to the active development of high-performance research tools for exploring the neurobiology at the cellular and molecular level. Following this trend, research and application of plasmonics, which is a technology employed in high-sensitivity optical biosensors and high-resolution imaging, is essential for studying neurons, as plasmonic nanoprobes can be used to stimulate specific areas of cells. In this study, three plasmonic modalities were explored as tools to study neurons and their responses: (1) plasmonic sensing of neuronal activities and neuron-related chemicals; (2) performance-improved optical imaging of neurons using plasmonic enhancements; and (3) plasmonic neuromodulations. Through a detailed investigation of these plasmonic modalities and research subjects that can be combined with them, it was confirmed that plasmonic sensing, imaging, and stimulation techniques have the potential to be effectively employed for the study of neurons and understanding their specific molecular activities.

Enhancing Electrical Outputs of Piezoelectric Nanogenerators by Controlling the Dielectric Constant of ZnO/PDMS Composite.

Structural optimizations of the piezoelectric layer in nanogenerators have been predicted to enhance the output performance in terms of the figure of merit. Here, we report the effect of dielectric constant on electrical outputs of piezoelectric nanogenerator using ZnO/PDMS composites with varied ZnO coverages. The dielectric constant of piezoelectric layers was adjusted from 3.37 to 6.75. The electrical output voltage of 9 mV was achieved in the nanogenerator containing the ZnO/PDMS composite with the dielectric constant of 3.46, which is an 11.3-fold enhancement compared to the value of the nanogenerator featuring the composite with high dielectric constants. Significantly, lowering the dielectric constant of the piezoelectric layer improves the electrical output performance of piezoelectric nanogenerators.

Injection-seeded high-repetition-rate short-pulse micro-laser based on upconversion nanoparticles.

We demonstrate a high repetition-rate upconversion green pulsed micro-laser, which is prepared by the fast thermal quenching of lanthanide-doped upconversion nanoparticles (UCNPs) via femtosecond-laser direct writing. The outer rim of the prepared upconversion hemi-ellipsoidal microstructure works as a whispering-gallery-mode (WGM) optical resonator for the coherent photon build-up of third-harmonic ultra-short seed pulses. When near-infrared (NIR) femtosecond laser pulses of wavelength 1545 nm are focused onto the upconversion WGM resonator, the optical third-harmonic is generated at 515 nm together with the upconversion luminescence. The weak third-harmonic (TH) seed pulses are coherently amplified in the hemi-ellipsoidal upconversion resonator as a result of the resonant interaction between the incident femtosecond laser field, the TH, the upconversion luminescence and the WGM. This upconversion lasing preserves the original repetition rate of the NIR pump laser and the output polarization state is also coherently aligned to the pump laser polarization. Because of the isotropic nature of the upconversion micro-ellipsoids, the upconversion lasing shows maximum intensity with a linearly polarized pump beam and minimum intensity with a circularly polarized pump beam. Our scheme devised for realizing high-repetition-rate lasing at higher photon energies in a compact micro platform will open up new ways for on-chip optical information processing, high-throughput microfluidic sensing, and localized micro light sources for optical memories.

A Review of Advanced Impedance Biosensors with Microfluidic Chips for Single-Cell Analysis.

Electrical impedance biosensors combined with microfluidic devices can be used to analyze fundamental biological processes for high-throughput analysis at the single-cell scale. These specialized analytical tools can determine the effectiveness and toxicity of drugs with high sensitivity and demonstrate biological functions on a single-cell scale. Because the various parameters of the cells can be measured depending on methods of single-cell trapping, technological development ultimately determine the efficiency and performance of the sensors. Identifying the latest trends in single-cell trapping technologies afford opportunities such as new structural design and combination with other technologies. This will lead to more advanced applications towards improving measurement sensitivity to the desired target. In this review, we examined the basic principles of impedance sensors and their applications in various biological fields. In the next step, we introduced the latest trend of microfluidic chip technology for trapping single cells and summarized the important findings on the characteristics of single cells in impedance biosensor systems that successfully trapped single cells. This is expected to be used as a leading technology in cell biology, pathology, and pharmacological fields, promoting the further understanding of complex functions and mechanisms within individual cells with numerous data sampling and accurate analysis capabilities.

Plasmonics-based spatially activated light microscopy for super-resolution imaging of molecular fluorescence.

In this Letter, we explore plasmonics-based spatially activated light microscopy (PSALM) for sub-diffraction-limited imaging of biomolecules. PSALM is based on the spatially switched activation of local amplified electromagnetic hot spots under multiple light incidence conditions. The hot spots are associated with surface plasmons that are excited and localized by surface nanostructures. The feasibility of the concept was demonstrated by imaging fluorescent nanobeads on a two-dimensional gold nanograting of a 100-nm-wide grating ridge, the size of which is the measure of the imaging resolution. The result confirms the performance of PSALM for imaging nanobeads at a resolution below the conventional diffraction limit.

Surface-enhanced localized surface plasmon resonance biosensing of avian influenza DNA hybridization using subwavelength metallic nanoarrays.

We demonstrated enhanced localized surface plasmon resonance (SPR) biosensing based on subwavelength gold nanoarrays built on a thin gold film. Arrays of nanogratings (1D) and nanoholes (2D) with a period of 200 nm were fabricated by electron-beam lithography and used for the detection of avian influenza DNA hybridization. Experimental results showed that both nanoarrays provided significant sensitivity improvement and, especially, 1D nanogratings exhibited higher SPR signal amplification compared with 2D nanohole arrays. The sensitivity enhancement is associated with changes in surface-limited reaction area and strong interactions between bound molecules and localized plasmon fields. Our approach is expected to improve both the sensitivity and sensing resolution and can be applicable to label-free detection of DNA without amplification by polymerase chain reaction.

Surface-enhanced plasmon resonance detection of nanoparticle-conjugated DNA hybridization.

We have investigated surface-enhanced plasmon resonance detection of DNA hybridization. Surface enhancement was based on the excitation of localized surface plasmon using subwavelength nanogratings, at a 300 nm period, coated with 24-mer ssDNA oligonucleotide, while optical signatures of DNA were amplified at the same time by gold nanoparticles conjugated with complementary ssDNA strands. When using nanoparticles of different sizes, maximum sensitivity enhancement, of more than 18 times, was obtained with nanoparticles of 20 nm diameter. This enhancement is mainly due to nanoparticle-associated signal amplification. Additional surface enhancement boosted the detection sensitivity by 57%. We have also confirmed the sensitivity enhancement to be linearly related to nanoparticle volume.