Oxidation of Alcohols in Continuous Flow with a Solid Phase Hypervalent Iodine Catalyst.

One of the most useful transformations in the synthetic chemist arsenal is the oxidation of alcohols to their corresponding carbonyl congeners. Despite its seemingly straightforward nature, this transformative reaction predominantly relies on the use of metals or hazardous reagents, making these processes highly unsustainable. To address this challenge, we have developed a sustainable metal-free method for the oxidation of alcohols in continuous flow. Using a solid phase hypervalent iodine catalyst and nBu4HSO5 as a phase transfer catalyst and co-oxidant, primary and secondary alcohols were selectively oxidized to the corresponding carbonyl motifs. This operationally simple continuous-flow set-up is highly robust (15 cycles run without significant catalyst leaching or loss of reaction efficiency), uses green solvents, such as acetonitrile or acetic acid, and is readily scalable.

Synthesis of the monomeric counterpart of Marinomycin A and B.

The synthesis of polyketide natural products has been a captivating pursuit in organic chemistry, with a particular focus on selectively introducing 1,3-polyol units. Among these natural products, Marinomycins A-D have garnered substantial interest due to their exceptional structural features and potent cytotoxicity. In this paper, we present a novel approach for synthesising the monomeric counterparts of Marinomycin A and B. Our method employs a previously established iterative cycle in conjunction with a standardised polyketide building block. Through this strategy, we showcase a promising pathway towards total and partial syntheses of these intriguing natural products.

Total synthesis of both enantiomers of the biosurfactant aureosurfactin via bidirectional synthesis with a chiral Horner-Wittig building block.

Aureosurfactin is a novel biosurfactant that exhibits similar surface tension activity to known biosurfactants. In this work, we now report a facile synthesis for aureosurfactin using a bidirectional synthetic strategy. Both enantiomers of the target compound were accessed from the (S)-building block, derived from the same chiral pool starting material.

Synthesis and evaluation of radioiodinated estrogens for diagnosis and therapy of male urogenital tumours.

The preparation of 24 estrogens, their estrogen receptor (ER) affinity and studies of radioiodinated estrogen binding to ER-positive male bladder tumor cells (HTB9) are described. The estrogens with the highest affinity were selected using fluorescence anisotropy assays. A 2,2,2-trifluoroethyl group at the 11ß-position caused particularly promising affinity. (Radio)iodination was performed on the 17α-vinyl group. Binding studies on HTB9 cells revealed picomolar affinities of radioconjugates 19 and 31, indicating promising ability for targeting of urogenital tumors.

Total Synthesis of Cryptoconcatone D via Construction of 1,3-Diol Units Using Chiral Horner-Wittig Reagents.

The modular synthesis of 1,3-polyols using a chiral phosphine oxide building block is reported. This versatile building block works in a repetitive way for the stereocontrolled synthesis of a tetraol key intermediate, which serves for the first total synthesis of the potentially anti-inflammatory natural product cryptoconcatone D. A new route toward the chiral building block is also presented: Starting from 2-deoxy-d-ribose, the optimized sequence now makes the use of the building block more attractive to practicing chemists again.

Ring Expansion of 2-Azido-2-phenyl-indan-1,3-dione for the Generation of Heterocyclic Scaffolds.

A novel ring expansion based on the readily available 2-azido-2-phenyl-indan-1,3-dione is described. Treatment with primary amines and cesium carbonate in a two-step sequence gives rise to 3-amino-2,3-dihydroisoquinoline-1,4-diones with an unprecedented substitution pattern. The corresponding conversion using amino acid methyl esters leads directly to a novel tricyclic 1,10a-dihydroimidazo-isoquinoline-2,5,10-trione scaffold, a structure that has never been reported before, to the best of our knowledge.

Rubazonic Acids and Their Synthesis.

Rubazonic acids are a class of dyes that are long-known, but studies on their syntheses and uses are rare. We now describe an experimentally simple and highly practical one-pot procedure for their synthesis starting from easily accessible 1H-pyrazol-5(4H)-ones. This protocol provides direct access to a broad range of the desired rubazonic acid derivatives through oxidative diazidation combined with a reductive work-up, without the need to isolate the potentially hazardous diazido compounds generated en route the target compounds. We also show how more challenging variants of rubazonic acid are efficiently prepared using an alternative two-step procedure and controlled hydrogenation conditions.

Activation of a Metal-Halogen Bond by Halogen Bonding.

In recent years, the non-covalent interaction of halogen bonding (XB) has found increasing application in organocatalysis. However, reports of the activation of metal-ligand bonds by XB have so far been limited to a few reactions with elemental iodine or bromine. Herein, we present the activation of metal-halogen bonds by two classes of inert halogen bond donors and the use of the resulting activated complexes in homogenous gold catalysis. The only recently explored class of iodolium derivatives were shown to be effective activators in two test reactions and their activity could be modulated by blocking of the Lewis acidic sites. Bis(benzimidazolium)-based halogen bonding activators provided even more rapid conversion, while the non-iodinated reference compound showed little activity. The role of halogen bonding in the activation of metal-halogen bonds was further investigated by NMR experiments and DFT calculations, which support the mode of activation occurring via halogen bonding.

A Synthetic Route Toward Tetrazoles: The Thermolysis of Geminal Diazides.

A new synthetic route toward the tetrazole core is described, which is based on a general fragmentation pattern that was found in a range of compounds featuring geminal diazido units. Through a simple two-step procedure, the synthesis of structurally diverse target compounds containing a tetrazole, such as tetrazoloquinoxalinones, benzoylaryltetrazoles, tetrazolotriazinones, and tetrazoloazepinones, was easily accomplished, starting from broadly accessible substrates (i.e., oxindoles, diarylethanones, pyrazolones, and phenanthrols). The initial oxidative diazidation reaction with iodine and sodium azide under mild conditions is followed by the thermal fragmentation under microwave irradiation, leading to the tetrazole products. Noteworthy, an experimental solution is presented in which the potentially hazardous diazide intermediates are not isolated and the concentration of crude reaction mixtures containing diazides is not required to achieve the tetrazoles in good yields.

The Deazidoalkoxylation: Sequential Nucleophilic Substitutions with Diazidated Diethyl Malonate.

Diazidated malonamides derived from amines and diazidated diethyl malonate react with lithiated alcohols through nucleophilic substitution reactions where azide acts as an unconventional leaving group. This deazidoalkoxylation leads to the formal construction of N, O-acetals, and the remaining azide functionality is a useful entry point for further functionalizations through, for example, standard cycloaddition chemistry. Thus, the presented chemistry provides an easy route toward densely functionalized molecules: Amines, alcohols, and alkynes can be attached onto the small malonate core unit in a sequential manner.

Pathways in the Degradation of Geminal Diazides.

The degradation of geminal diazides is described. We show that diazido acetates are converted into tetrazoles through the treatment with bases. The reaction of dichloro ketones with azide anions provides acyl azides, through in situ formation of diazido ketones. We present experimental and theoretical evidence that both fragmentations may involve the generation of acyl cyanide intermediates. The controlled degradation of terminal alkynes into amides (by loss of one carbon) or ureas (by loss of two carbons) is also shown.

Cleavage of 1,3-dicarbonyls through oxidative amidation.

A mild and convenient protocol for the oxidative cleavage of 1,3-diketone compounds is described. Under metal-free conditions, the method converts the 1,3-dicarbonyls into amides when treated with (nBu4N)N3 and iodine in the presence of an amine at room temperature. Using this method, a range of 1,3-dicarbonyls with various structural motifs including sterically demanding substituents and ordinary functional groups were easily fragmented, and it is demonstrated that cyclic 1,3-dicarbonyls can be directly transformed into acyclic diamides through ring-opening. Initial mechanistic studies show that diazidation of the enol form is followed by nucleophilic substitution with the amine.

Site-Selective Acylations with Tailor-Made Catalysts.

The acylation of alcohols catalyzed by N,N-dimethylamino pyridine (DMAP) is, despite its widespread use, sometimes confronted with substrate-specific problems: For example, target compounds with multiple hydroxy groups may show insufficient selectivity for one hydroxyl, and the resulting product mixtures are hardly separable. Here we describe a concept that aims at tailor-made catalysts for the site-specific acylation. To this end, we introduce a catalyst library where each entry is constructed by connecting a variable and readily tuned peptide scaffold with a catalytically active unit based on DMAP. For selected examples, we demonstrate how library screening leads to the identification of optimized catalysts, and the substrates of interest can be converted with a markedly enhanced site-selectivity compared with only DMAP. Furthermore, substrate-optimized catalysts of this type can be used to selectively convert "their" substrate in the presence of structurally similar compounds, an important requisite for reactions with mixtures of substances.

Silver-free activation of ligated gold(I) chlorides: the use of [Me3NB12Cl11]- as a weakly coordinating anion in homogeneous gold catalysis.

Phosphane and N-heterocyclic carbene ligated gold(I) chlorides can be effectively activated by Na[Me3NB12Cl11] (1) under silver-free conditions. This activation method with a weakly coordinating closo-dodecaborate anion was shown to be suitable for a large variety of reactions known to be catalyzed by homogeneous gold species, ranging from carbocyclizations to heterocyclizations. Additionally, the capability of 1 in a previously unknown conversion of 5-silyloxy-1,6-allenynes was demonstrated.

Geminal Diazides Derived from 1,3-Dicarbonyls: A Protocol for Synthesis.

Geminal diazides constitute a rare class of compounds where only a limited number of methods are available for their synthesis. We present the reaction of 1,3-dicarbonyl compounds (as exemplified by malonates, 3-oxoesters, and 1,3-diketones) with molecular iodine and sodium azide in aqueous DMSO providing a general access to geminal diazides. A broad range of geminal diazides with various structural motifs including sterically demanding substituents and ordinary functional groups were synthesized, and it was shown that the diazidation of 1,3-dicarbonyls can be selectively achieved even in the presence of other 1,3-dicarbonyls with substituents at 2-position. Additionally, several diazides were studied regarding their thermal stability.

Synthesis and Chemistry of Organic Geminal Di- and Triazides.

This review recapitulates all available literature dealing with the synthesis and reactivity of geminal organic di- and triazides. These compound classes are, to a large extent, unexplored despite their promising chemical properties and their simple preparation. In addition, the chemistry of carbonyl diazide (2) and tetraazidomethane (105) is described in separate sections.

Chlorine and sodium chemical shift imaging during acute stroke in a rat model at 9.4 Tesla.

OBJECT: A triple-resonant coil setup with an (1)H linear resonator and a double-tuned (23)Na/(35)Cl surface coil was used to study the evolution of T 2 (*) and M 0 for (35)Cl and (23)Na in a rat stroke model during the acute phase at 9.4 Tesla. MATERIALS AND METHODS: In vivo measurements were performed 1.5-7 h after onset of stroke (n = 2), ten days after onset (n = 1) and on a healthy control rat by a chemical shift imaging sequence. Measurement times were 15 min ((23)Na) and 57 min ((35)Cl). RESULTS: The relaxation times ten days after onset [T 2 (*) = 14.3 ± 1.8 ms ((23)Na) and 6.0 ± 1.3 ms ((35)Cl)] are clearly prolonged in comparison to a healthy rat [T 2 (*) = 4.8 ± 0.6 ms ((23)Na) and 2.1 ± 0.3 ms ((35)Cl)] and the acute phase [T 2 (*) = 5.6 ± 0.2 ms ((23)Na) and 1.9 ± 0.1 ms ((35)Cl)]. CONCLUSION: M 0 in the infarcted region clearly rises later and slower for chlorine than for sodium. To the best of our knowledge, these are the first combined proton, sodium, and chlorine measurements in an animal stroke model during the acute phase.

The synthesis of α-azidoesters and geminal triazides.

Three simple methods for the synthesis of geminal triazides are described: Starting from 1) 3-oxocarboxylic acids, 2) iodomethyl ketones, or 3) terminal olefins, a range of triazidomethyl ketones can be constructed under mild oxidative reaction conditions by the use of IBX-SO3 K, a sulfonylated derivative of 2-iodoxybenzoic acid (IBX), and NaN3 as an azide source. This is the first report of representatives of this novel class of triazide compounds: Despite their high nitrogen content, the geminal triazides are easy to handle, even when preparative-scale syntheses are performed. (Caution: These procedures still require protective measures!) The triazides are now broadly available for further studies regarding their properties and reactivity. Furthermore, we show how the method can be used to provide α-azidoesters, which are potential building blocks for amino acids.

Single Cell Micro RNA Sequencing Library Preparation.

Micro RNAs represent important post-transcriptional regulators in health and are involved in the onset of many diseases. Therefore, the further characterization of physiological miRNA functions is an important basic research question, and miRNAs even have high potential as biomarkers both for prognosis and diagnosis. In order to exploit this potential, it is mandatory to accurately quantify the miRNA expression not only in bulk but also on the single-cell level. Here, we describe a protocol, which facilitates miRNA sequencing library preparation of very low input samples, single cells, and even clinical samples such as circulating tumor cells. The protocol can be combined with different single-cell isolation methods (e.g., micromanipulation and FACS sorting). After cell lysis, sequencing adapters are ligated to the miRNAs, other ncRNA species, and adapter dimers are reduced by exonuclease digest, the miRNA library is reverse transcribed, amplified, and purified. Furthermore, quality controls are described to select only high-quality samples for sequencing.

A novel approach to generate enzyme-free single cell suspensions from archived tissues for miRNA sequencing.

Obtaining high-quality omics data at the single-cell level from archived human tissue samples is crucial for gaining insights into cellular heterogeneity and pushing the field of personalized medicine forward. In this technical brief we present a comprehensive methodological framework for the efficient enzyme-free preparation of tissue-derived single cell suspensions and their conversion into single-cell miRNA sequencing libraries. The resulting data from this study have the potential to deepen our understanding of miRNA expression at the single-cell level and its relevance in the context of the examined tissues. The workflow encompasses tissue collection, RNALater immersion, storage, thawing, TissueGrinder-mediated dissociation, miRNA lysis, library preparation, sequencing, and data analysis. Quality control measures ensure reliable miRNA data, with specific attention to sample quality. The UMAP analysis reveals tissue-specific cell clustering, while miRNA diversity reflects tissue variations. The presented workflow effectively processes preserved tissues, extending opportunities for retrospective analysis and biobank utilization.