RESUMO
A rapid, label-free, and broadly applicable chemical analysis platform for nanovesicles and subcellular components is highly desirable for diagnostic assays. We demonstrate an integrated nanogap plasmonic sensing platform that combines subvolt dielectrophoresis (DEP) trapping, gold nanoparticles (AuNPs), and a lineated illumination scheme for real-time, surface-enhanced Raman spectroscopy (SERS) imaging of biological nanoparticles. Our system is capable of isolating suspended sub-100 nm vesicles and imaging the Raman spectra of their cargo within seconds, 100 times faster than conventional point-scan Raman systems. Bare AuNPs are spiked into solution and simultaneously trapped with the nanovesicles along the gap to boost local optical fields. In addition, our platform offers simultaneous and delay-free spatial and temporal multiplexing functionality. These nanogap devices can be mass-produced via atomic layer lithography and provide a practical platform for high-speed SERS analysis of biological nanoparticles.
Assuntos
Nanopartículas/análise , Nanoestruturas/química , Análise Espectral Raman/métodos , Eletroforese/instrumentação , Eletroforese/métodos , Desenho de Equipamento , Ouro/análise , Lipossomos/análise , Nanopartículas Metálicas/análise , Nanoestruturas/ultraestrutura , Tamanho da Partícula , Fosfolipídeos/análise , Análise Espectral Raman/instrumentação , Propriedades de SuperfícieRESUMO
We present a novel plasmonic antenna structure, a split-wedge antenna, created by splitting an ultrasharp metallic wedge with a nanogap perpendicular to its apex. The nanogap can tightly confine gap plasmons and boost the local optical field intensity in and around these opposing metallic wedge tips. This three-dimensional split-wedge antenna integrates the key features of nanogaps and sharp tips, i.e., tight field confinement and three-dimensional nanofocusing, respectively, into a single platform. We fabricate split-wedge antennas with gaps that are as small as 1 nm in width at the wafer scale by combining silicon V-grooves with template stripping and atomic layer lithography. Computer simulations show that the field enhancement and confinement are stronger at the tip-gap interface compared to what standalone tips or nanogaps produce, with electric field amplitude enhancement factors exceeding 50 when near-infrared light is focused on the tip-gap geometry. The resulting nanometric hotspot volume is on the order of λ3/106. Experimentally, Raman enhancement factors exceeding 107 are observed from a 2 nm gap split-wedge antenna, demonstrating its potential for sensing and spectroscopy applications.
RESUMO
A plasmonic nanohole sensor for virus-like particle capture and virucidal drug evaluation is reported. Using a materials-selective surface functionalization scheme, passive immobilization of virus-like particles only within the nanoholes is achieved. The findings demonstrate that a low surface coverage of particles only inside the functionalized nanoholes significantly improves nanoplasmonic sensing performance over conventional nanohole arrays.
Assuntos
Antivirais/farmacologia , Técnicas Biossensoriais/métodos , Vírus da Dengue/efeitos dos fármacos , Avaliação de Medicamentos , Nanoestruturas/química , Vírion/efeitos dos fármacos , Adsorção , Nanoestruturas/ultraestrutura , Peptídeos/química , Peptídeos/farmacologia , Estrutura Secundária de ProteínaRESUMO
Open-channel microfluidics enables precise positioning and confinement of liquid volume to interface with tightly integrated optics, sensors, and circuit elements. Active actuation via electric fields can offer a reduced footprint compared to passive microfluidic ensembles and removes the burden of intricate mechanical assembly of enclosed systems. Typical systems actuate via manipulating surface wettability (i.e., electrowetting), which can render low-voltage but forfeits open-microchannel confinement. The dielectric polarization force is an alternative which can generate open liquid microchannels (sub-100 µm) but requires large operating voltages (50-200 VRMS) and low conductivity solutions. Here we show actuation of microchannels as narrow as 1 µm using voltages as low as 0.5 VRMS for both deionized water and physiological buffer. This was achieved using resonant, nanoscale focusing of radio frequency power and an electrode geometry designed to abate surface tension. We demonstrate practical fluidic applications including open mixing, lateral-flow protein labeling, filtration, and viral transport for infrared biosensing-known to suffer strong absorption losses from enclosed channel material and water. This tube-free system is coupled with resonant wireless power transfer to remove all obstructing hardware - ideal for high-numerical-aperture microscopy. Wireless, smartphone-driven fluidics is presented to fully showcase the practical application of this technology.
Assuntos
Eletroumectação , Microfluídica , Tensão Superficial , Água , MolhabilidadeRESUMO
Tuning the properties of optical metamaterials in real time is one of the grand challenges of photonics. Being able to do so will enable a class of adaptive photonic materials for use in applications such as surface enhanced Raman spectroscopy and reflectors/absorbers. One strategy to achieving this goal is based on the electrovariable self-assembly and disassembly of two-dimensional nanoparticle arrays at a metal | liquid interface. As expected, the structure results in plasmonic coupling between NPs in the array but perhaps as importantly between the array and the metal surface. In such a system, the density of the nanoparticle array can be reversibly controlled by the variation of electrode potential. Theory suggests that due to a collective plasmon-coupling effect less than 1 V variation of electrode potential can give rise to a dramatic simultaneous change in optical reflectivity from â¼93% to â¼1% and the amplification of the SERS signal by up to 5 orders of magnitude. This is experimentally demonstrated using a platform based on the voltage-controlled assembly of 40 nm Au-nanoparticle arrays at a TiN/Ag electrode in contact with an aqueous electrolyte. We show that all the physics underpinning the behavior of this platform works precisely as suggested by the proposed theory, setting the electrochemical nanoplasmonics as a promising direction in photonics research.
RESUMO
We present a new technique to engineer metallic interfaces to produce sharp tips with smooth curved surfaces and variable tip angles, as well as ridges with arbitrary contour shapes, all of which can be integrated with grating couplers for applications in plasmonics and nanophotonics. We combine template stripping, a nanofabrication scheme, with atomic layer deposition (ALD) to produce the ultrasharp nanoscale tips and wedges using only conventional photolithography. Conformal ALD coating of insulators over silicon trench molds of various shapes reduces their widths to make nanoscale features without high-resolution lithography. Along with a metal deposition and template stripping, this size-reduction scheme can mass-produce narrow and ultrasharp (<10 nm radius of curvature) metallic wedges and tips over an entire 4 in. wafer. This size-reduction scheme can create metallic tips out of arbitrary trench patterns that have smooth curved surfaces to facilitate efficient adiabatic nanofocusing which will benefit applications in near-field optical spectroscopy, plasmonic waveguides, particle trapping, hot-electron plasmonics, and nonlinear optics.
RESUMO
We combine nanostencil lithography and template stripping to create self-aligned patterns about the apex of ultrasmooth metal pyramids with high throughput. Three-dimensional patterns such as spiral and asymmetric linear gratings, which can couple incident light into a hot spot at the tip, are presented as examples of this fabrication method. Computer simulations demonstrate that spiral and linear diffraction grating patterns are both effective at coupling light to the tip. The self-aligned stencil lithography technique can be useful for integrating plasmonic couplers with sharp metallic tips for applications such as near-field optical spectroscopy, tip-based optical trapping, plasmonic sensing, and heat-assisted magnetic recording.