How [FeFe]-Hydrogenase Facilitates Bidirectional Proton Transfer.

Hydrogenases are metalloenzymes that catalyze the conversion of protons and molecular hydrogen, H2. [FeFe]-hydrogenases show particularly high rates of hydrogen turnover and have inspired numerous compounds for biomimetic H2 production. Two decades of research on the active site cofactor of [FeFe]-hydrogenases have put forward multiple models of the catalytic proceedings. In comparison, our understanding of proton transfer is poor. Previously, residues were identified forming a hydrogen-bonding network between active site cofactor and bulk solvent; however, the exact mechanism of catalytic proton transfer remained inconclusive. Here, we employ in situ infrared difference spectroscopy on the [FeFe]-hydrogenase from Chlamydomonas reinhardtii evaluating dynamic changes in the hydrogen-bonding network upon photoreduction. While proton transfer appears to be impaired in the oxidized state (Hox), the presented data support continuous proton transfer in the reduced state (Hred). Our analysis allows for a direct, molecular unique assignment to individual amino acid residues. We found that transient protonation changes of glutamic acid residue E141 and, most notably, arginine R148 facilitate bidirectional proton transfer in [FeFe]-hydrogenases.

Phthalocyanine-Sensitized Generation of Silver Nanoparticles in Aqueous Buffer Solution Triggered by Red LED-Light.

Silver nanoparticles have been generated in aqueous buffer solution using a water-soluble silicon phthalocyanine sensitizer. Red light illumination (660 nm LED) was performed under aerobic conditions at ambient temperature in the presence of TEOA as a reductant. Structural characterization of the Ag nanoparticles formed was carried out by transmission electron microscopy (TEM). The resulting silver particles, depending on irradiation time and choice of procedure, were found to have a spheric shape and a narrow size distribution of 5-10 nm.

Photochemical Synthesis of cis,trans,cis-1,2,3,4-Tetrakis(diphenylphosphanyl)buta-1,3-diene and Its Metal Coordination.

The new bis(bidentate) tetraphosphane cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphanyl)buta-1,3-diene (dppbd) (7) was obtained by applying a photochemical synthetic protocol. The key step of the photochemical reaction consisted of an intramolecular [2+2] cycloaddition involving a C-C double and triple bond of the Pt-dimer species of the formula [Pt2Cl4(dppa)(trans-dppen)] (2) {dppa = 1,2-bis(diphenylphosphanyl)acetylene and dppen = 1,2-bis(diphenylphosphanyl)ethene} leading to [Pt2Cl4(dppbd)] (5). The asymmetrically bridged precursor complex 2 was obtained by combinatorial chemistry. Single crystal X-ray structure analyses of 2 and 5 proved that the intramolecular photochemical reaction occurred. Cyanolysis of 5 gave 7, which was oxidized to dppbdO4 (8). Compounds 7, 8, and the PdII dimer complex [Pd2Cl4(dppbd)] (9) were characterized in the solid state by a single-crystal X-ray structure analysis. Interesting photophysial properties emerged from the UV/Vis spectra acquired for 7 and the dimer Os complexes meso-Δ,Λ/Λ,Δ-[Os2(bpy)4(dppbd)](PF6)4 (10) and rac-Δ,Δ/Λ,Λ-[Os2(bpy)4(dppbd)](PF6)4 (11).

The Tetracyanopyridinide Dimer Dianion, σ-[TCNPy]2 (2.).

The reaction of 2,3,5,6-tetracyanopyridine (TCNPy) and Cr(C6 H6 )2 forms diamagnetic σ-[TCNPy]2 (2-) possessing a 1.572(3) Šintrafragment sp(3) -sp(3) bond. This is in contrast to the structurally related 1,2,4,5-tetracyanobenzene and 1,2,4,5-tetracyanopyrazine that form π-dimer dianions possessing long, multicenter bonds.

Characterization of Tetracyanopyridine (TCNPy)-Based Magnets: V[TCNPy]2 ⋠z (CH2 Cl2 ) (Tc =111†K) and V[TCNPy]3 ⋠z (CH2 Cl2 ) (Tc =90†K).

The reaction of 2,3,5,6-tetracyanopyridine (TCNPy) with V(CO)6 in CH2 Cl2 forms new organic-based magnets of V[TCNPy]x ⋅z (CH2 Cl2 ) (x=2, 3) composition. Analysis of the IR spectra suggests that the TCNPy is reduced and coordinated to V(II) sites through the nitriles. V[TCNPy]x order as ferrimagnets with 111 and 90 K Tc values for V[TCNPy]2 and V[TCNPy]3 , respectively. Their respective remanent magnetizations and coercive fields are 1260 and 250 emuOe mol(-1) and 9 and 6 Oe at 5 K, and they exhibit some spin-glass behavior.

Synthesis, Characterization, and Reactivity of Functionalized Trinuclear Iron-Sulfur Clusters - A New Class of Bioinspired Hydrogenase Models.

The air- and moisture-stable iron-sulfur carbonyl clusters Fe3S2(CO)7(dppm) (1) and Fe3S2(CO)7(dppf) (2) carrying the bisphosphine ligands bis(diphenylphosphanyl)methane (dppm) and 1,1'-bis(diphenylphosphanyl)ferrocene (dppf) were prepared and fully characterized. Two alternative synthetic routes based on different thionation reactions of triiron dodecacarbonyl were tested. The molecular structures of the methylene-bridged compound 1 and the ferrocene-functionalized derivative 2 were determined by single-crystal X-ray diffraction. The catalytic reactivity of the trinuclear iron-sulfur cluster core for proton reduction in solution at low overpotential was demonstrated. These deeply colored bisphosphine-bridged sulfur-capped iron carbonyl systems are discussed as promising candidates for the development of new bioinspired model compounds of iron-based hydrogenases.

Rhodium-coordinated poly(arylene-ethynylene)-alt-poly(arylene-vinylene) copolymer acting as photocatalyst for visible-light-powered NAD⁺/NADH reduction.

A 2,2'-bipyridyl-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene) polymer, acting as a light-harvesting ligand system, was synthesized and coupled to an organometallic rhodium complex designed for photocatalytic NAD(+)/NADH reduction. The material, which absorbs over a wide spectral range, was characterized by using various analytical techniques, confirming its chemical structure and properties. The dielectric function of the material was determined from spectroscopic ellipsometry measurements. Photocatalytic reduction of nucleotide redox cofactors under visible light irradiation (390-650 nm) was performed and is discussed in detail. The new metal-containing polymer can be used to cover large surface areas (e.g. glass beads) and, due to this immobilization step, can be easily separated from the reaction solution after photolysis. Because of its high stability, the polymer-based catalyst system can be repeatedly used under different reaction conditions for (photo)chemical reduction of NAD(+). With this concept, enzymatic, photo-biocatalytic systems for solar energy conversion can be facilitated, and the precious metal catalyst can be recycled.

Synthesis and characterization of redox-active charge-transfer complexes with 2,3,5,6-tetracyanopyridine (TCNPy) for the photogeneration of pyridinium radicals.

The heteroaromatic polynitrile compound tetracyanopyridine (TCNPy) is introduced as a new electron acceptor for the formation of deeply colored charge-transfer complexes. In MeCN, TCNPy is characterized by a quasireversible one-electron-reduction process at -0.51 V (versus SCE). The tetracyanopyridine radical anion undergoes a secondary chemical reaction, which is assigned to a protonation step. TCNPy has been demonstrated to generate 1:1 complexes with various electron donors, including tetrathiafulvalene (TTF) and dihydroxybenzene derivatives, such as p-hydroquinone and catechol. Visible- or NIR-light-induced excitation of the intense charge-transfer bands of these compounds leads to a direct optical electron-transfer process for the formation of the corresponding radical-ion pairs. The presence of available electron donors that contain protic groups in close proximity to the TCNPy acceptor site opens up a new strategy for the photocontrolled generation of pyridinium radicals in a stepwise proton-coupled electron-transfer (PCET) sequence.

Photocatalytic reduction of artificial and natural nucleotide co-factors with a chlorophyll-like tin-dihydroporphyrin sensitizer.

An efficient photocatalytic two-electron reduction and protonation of nicotine amide adenine dinucleotide (NAD(+)), as well as the synthetic nucleotide co-factor analogue N-benzyl-3-carbamoyl-pyridinium (BNAD(+)), powered by photons in the long-wavelength region of visible light (λirr > 610 nm), is demonstrated for the first time. This functional artificial photosynthetic counterpart of the complete energy-trapping and solar-to-fuel conversion primary processes occurring in natural photosystem I (PS I) is achieved with a robust water-soluble tin(IV) complex of meso-tetrakis(N-methylpyridinium)-chlorin acting as the light-harvesting sensitizer (threshold wavelength of λthr = 660 nm). In buffered aqueous solution, this chlorophyll-like compound photocatalytically recycles a rhodium hydride complex of the type [Cp*Rh(bpy)H](+), which is able to mediate regioselective hydride transfer processes. Different one- and two-electron donors are tested for the reductive quenching of the irradiated tin complex to initiate the secondary dark reactions leading to nucleotide co-factor reduction. Very promising conversion efficiencies, quantum yields, and excellent photosensitizer stabilities are observed. As an example of a catalytic dark reaction utilizing the reduction equivalents of accumulated NADH, an enzymatic process for the selective transformation of aldehydes with alcohol dehydrogenase (ADH) coupled to the primary photoreactions of the system is also demonstrated. A tentative reaction mechanism for the transfer of two electrons and one proton from the reductively quenched tin chlorin sensitizer to the rhodium co-catalyst, acting as a reversible hydride carrier, is proposed.

Synthesis and characterisation of cobalt, nickel and copper complexes with tripodal 4N ligands as novel catalysts for the homogeneous partial oxidation of alkanes.

Four new compounds of the general formula [M(L)(CH3COO)][PF6], where L is a tetradentate tripodal ligand such as tris[2-(dimethylamino)ethyl]amine (L1) or (2-aminoethyl)bis(2-pyridylmethyl)amine (L2) and M is Co(II), Ni(II) or Cu(II), have been prepared employing a simple two-step synthesis. The compounds have been characterised by elemental analysis, mass spectroscopy, IR spectroscopy and X-ray diffraction. The catalytic properties of the derivatives containing the aliphatic ligand L1 have been investigated in particular toward the oxidation of cyclohexane and adamantane in the presence of the sacrificial oxidant m-CPBA (meta-chloroperbenzoic acid). Good TONs and selectivity have been determined for the cobalt and nickel compounds.

Functionalized derivatives of 1,4-dimethylnaphthalene as precursors for biomedical applications: synthesis, structures, spectroscopy and photochemical activation in the presence of dioxygen.

Decomposition of endoperoxide containing molecules is an attractive approach for the delayed release of singlet oxygen under mild reaction conditions. Here we describe a new method for the adaptation of the corresponding decay times by controlling the supramolecular functional structure of the surrounding matrix in the immediate vicinity of embedded singlet oxygen precursors. Thus, a significant prolongation of the lifetime of the endoperoxide species is possible by raising the energy barrier of the thermal (1)O(2)-releasing step via a restriction of the free volume of the applied carrier material. Enabling such a prolonged decomposition period is crucial for potential biomedical applications of endoperoxide containing molecules, since sufficient time for appropriate cell uptake and transport to the desired target region must be available under physiological conditions before the tissue damaging-power of the reactive oxygen species formed is completely exhausted. Two novel polyaromatic systems for the intermediate storage and transport of endoperoxides and the controlled release of singlet oxygen in the context of anticancer and antibiotic activity have been prepared and characterized. These compounds are based on functionalized derivatives of the 1,4-dimethylnaphthalene family which are readily forming metastable endoperoxide species in the presence of dioxygen, a photosensitizer molecule such as methylene blue and visible light. In contrast to previously known systems of similar photoreactivity, the endoperoxide carrying molecules have been designed with optimized molecular properties in terms of potential chemotherapeutic applications. These include modifications of polarity to improve their incorporation into various biocompatible carrier materials, the introduction of hydrogen bonding motifs to additionally influence the endoperoxide decay kinetics, and the synthesis of bifunctional derivatives to enable synergistic effects of multiple singlet oxygen binding sites with an enhanced local concentration of reactive species. With these compounds, a promising degree of endoperoxide stability adjustment within the carrier matrix has been achieved (polymer films or nanoparticles), which now opens the stage for appropriate targeting of the corresponding pro-drugs into live cells. First results on cytocidal and cytostatic properties of these compounds embedded in ethylcellulose nanoparticles are presented. Furthermore, an efficient low-cost method for the photochemical production of reactive endoperoxides based on high-power 660 nm LED excitation at room temperature and ambient conditions in ethanol solution is reported.

A water soluble tri-cationic porphyrin-EDTA conjugate induces apoptosis in human neuroendocrine tumor cell lines.

In this study, a completely water soluble tri-cationic porphyrin-EDTA conjugate was synthesized. We present data demonstrating the tumoristatic effects of the novel fully water soluble cationic porphyrin TMPy(3)PhenEDTA-P-Cl(4) in the dark, in the medullary thyroid carcinoma cell lines MTC-SK and SHER-I and weaker effects in the small intestinal neuroendocrine tumor cell line KRJ-I. In addition, cytotoxic effects were also studied in normal human fibroblasts that represent normal tissue and the results are compared to the tumor cell lines.

Design, synthesis and characterization of a modular bridging ligand platform for bio-inspired hydrogen production.

Synthesis and characterization of a novel type of ambident bridging ligands joining together the functional prerequisites for visible-light absorption, photoinduced electron transfer and catalytic proton reduction is presented. This class of compounds consists of a chromophoric 1,2-diimine-based π-acceptor site and a rigid polyaromatic dithiolate chelator. Due to the presence of a common conjugated linker moiety with an intrinsic two-electron redox reactivity and a suitable orbital coupling of the subunits, a favourable situation for vectorial multielectron transfer from attached electron donors to a catalytic acceptor site is provided. As an example for the application of this kind of bifunctional ligand systems, a [FeFe]-hydrogenase enzyme model compound is prepared and structurally characterized. Electrocatalytic hydrogen formation with this complex is demonstrated.

Synthesis and characterization of a stable bismuth(III) A3-corrole.

An efficient metalation procedure for bismuth complexes with meso-substituted corrole ligands is presented. Reaction of 5,10,15-tris-pentafluorophenylcorrole H(3)(TpFPC) with Bi{N(SiMe(3))(3)} converts the free ligand H(3)(TpFPC) to a neutral low-valent species Bi(TpFPC), which has been characterized by different spectroscopic techniques. (Spectro)electrochemical studies were performed in order to describe the redox potentials of the Bi(TpFPC) complex and to ascribe the sites of electron transfer. The first crystal structure of a bismuth corrole is presented and compared to the geometry-optimized molecular structure obtained with density functional theory (DFT) calculations. We show an example of a 4-coordinate metallocorrole with a very large out-of-plane displacement and significant doming. The electronic structure of the novel bismuth corrole system is discussed in detail. Time-dependent DFT results support the proposed assignment of electronic transitions observed for the Bi(TpFPC) derivative. To account for the reactivity we investigated the photocatalytic properties of the Bi(TpFPC) complex.

Suzuki-Miyaura cross-coupling reaction on copper-trans-A(2)B corroles with excellent functional group tolerance.

The palladium-catalyzed Suzuki-Miyaura cross-coupling reaction has been investigated on meso-substituted trans-A(2)B-corrole using tailored Pd-catalyst systems.We present the first examples of Suzuki-Miyaura cross-coupling reactions on meso-substituted trans-A(2)B-corrole derivatives with neutral, sterically hindered, inactivated and heteroaromatic boronic acids and esters, alkenylboronic acids, as well as quickly deboronating aryl boronic acids and benzo-condensated five membered heterocyclic boronic acids. In addition, we established a high-yield procedure for the Suzuki-Miyaura cross-coupling reaction of corroles with neutral boronic acids.Due to the lability of the free-base corrole macrocycles, functionalization of the corrole periphery was performed with the corresponding Cu-metallated species. meso-Substituted trans-A(2)B-corrole can hence be regarded as highly versatile platform towards more sophisticated corrole systems.X-ray structure analysis of a functionalized meso-substituted trans-A(2)B copper corrole exhibited the typical features of such a Cu-complex: short N-Cu distances and a saddled corrole configuration.Moreover, we observed a sensitivity of the formal oxidation state of the coordinated copper ions towards Suzuki-Miyaura cross-coupling reaction conditions, where the central copper(III) ion approaches the characteristic features of a copper(II) species. This redox behaviour was examined by UV/vis absorption spectra, nuclear magnetic resonance (NMR) experiments and time-dependent density functional theoretical calculations.

Determination of (3)J((1)H3'-(31)P) couplings in a DNA oligomer with enhanced sensitivity employing a constant-time TOCSY difference experiment.

A constant-time TOCSY difference experiment for the determination of (3)J((1)H3'-(31)P) coupling constants in non-isotope-labelled DNA oligonucleotides is presented. The method is tested on a DNA octamer and compared with the established constant-time NOESY difference method. Each (3)J((1)H3'-(31)P) coupling constant is determined from amplitude changes caused by phosphorous decoupling, which are observable on multiple cross-peaks, thus leading to a high accuracy of the value of the (3)J((1)H3'-(31)P) coupling constant. The new experiment delivers up to three times the sensitivity compared with previously reported methods.

Antimony-Oxo Porphyrins as Photocatalysts for Redox-Neutral C-H to C-C Bond Conversion.

The use of high-valent antimony-oxo porphyrins as visible-light photocatalysts operating via direct hydrogen atom transfer has been demonstrated. Computational analysis indicates that the triplet excited state of these complexes shows an oxyl radical behavior, while the SbV center remains in a high-valent oxidation state, serving uniquely to carry the oxo moiety and activate the coordinated ligands. This porphyrin-based system has been exploited upon irradiation to catalyze C-H to C-C bond conversion via the addition of hydrogen donors (ethers and aldehydes) onto Michael acceptors in a redox-neutral fashion without the need of any external oxidant. Laser flash photolysis experiments confirmed that the triplet excited state of the photocatalyst triggers the desired C-H cleavage.

Red light-triggered photoreduction on a nucleic acid template.

Conjugate Sn(iv)(pyropheophorbide a)dichloride-(peptide nucleic acid) catalyzes reduction of azobenzene derivatives in the presence of complementary nucleic acid (NA) upon irridiation with red light (660 nm). This is the first red light-induced NA-templated photoreduction. It is highly sensitive to single mismatches in the NA-template and can detect down to 5 nM NAs.

Competitive binding assay for biotin and biotin derivatives, based on avidin and biotin-4-fluorescein.

Biotinylated molecules are extensively employed in bioanalytics and biotechnology. The currently available assays for quantification of biotin groups suffer from low sensitivity, low accuracy, or provide highly variable responses for different biotin derivatives. We developed a competitive binding assay in which avidin was pre-blocked to different extents by the biotinylated analyte and a constant amount of biotin-4-fluorescein (B4F) was added, resulting in strong quenching of the B4F. The assay was robust and the shape of the titration curve immediately revealed whether the data were reliable or perturbed by steric hindrance in case of large biotin derivatives. These advantages justified well the 10× higher sample consumption (~0.6nmol) compared to single point assays. The assay was applied to a representative set of small biotin derivatives and validated by cross-control with the well-established 2-anilinonaphthalene-6-sulfonic acid (2,6-ANS) binding assay. In comparison to the 2,6-ANS binding assay, the lower precision (±10%) was compensated by the 100-fold higher sensitivity and the deviations from the ANS assay were ≤5%. In comparison to the more sensitive biotin group assays, the new assay has the advantage of minimal bias for different biotin derivatives. In case of biotinylated DNA with 30 nucleotides, steric hindrance was found to reduce the accuracy of biotin group determination; this problem was overcome by partial digestion to n≤5 nucleotide residues with a 3'-exonuclease. The newly proposed biotin group assay offers a useful compromise in terms of sensitivity, precision, trueness, and robustness.

DNA interactions and photocatalytic strand cleavage by artificial nucleases based on water-soluble gold(III) porphyrins.

The novel gold porphyrin complex (5,10,15-tris(N-methylpyridinium-4-yl)-20-(1-pyrenyl)-porphyrinato)gold(III) chloride, [Au(III)(TMPy3Pyr1P)]Cl4, was prepared and characterized by optical spectroscopy, high-resolution nuclear magnetic resonance (NMR), and electrospray mass spectrometry. This cationic multichromophore compound exhibits excellent water solubility and does not form aggregates under physiological conditions. Binding interactions of this complex and related model compounds with nucleic acid substrates have been studied and characterized by NMR and circular dichroism spectroscopy. The photoreactivity of [Au(III)(TMPy3Pyr1P)]Cl4 was investigated under anaerobic and aerobic conditions in the presence of an excess of purine nucleoside, guanosine, and plasmid DNA. Photocatalytic oxidative degradation of guanosine and the change from supercoiled to circular plasmid DNA upon monochromatic irradiation and polychromatic blue-light exposure with a maximum at 420 nm was explored. The potential of the novel water-soluble cationic metallointercalator complex [Au(III)(TMPy3Pyr1P)]Cl4 to serve as a catalytic photonuclease for the cleavage of DNA has been demonstrated.