Exploring complications following cranioplasty after decompressive hemicraniectomy: A retrospective bicenter assessment of autologous, PMMA and CAD implants.

Cranioplasty (CP) after decompressive hemicraniectomy (DHC) is a common neurosurgical procedure with a high complication rate. The best material for the repair of large cranial defects is unclear. The aim of this study was to evaluate different implant materials regarding surgery related complications after CP. Type of materials include the autologous bone flap (ABF), polymethylmethacrylate (PMMA), calcium phosphate reinforced with titanium mesh (CaP-Ti), polyetheretherketone (PEEK) and hydroxyapatite (HA). A retrospective, descriptive, observational bicenter study was performed, medical data of all patients who underwent CP after DHC between January 1st, 2016 and December 31st, 2022 were analyzed. Follow-up was until December 31st, 2023. 139 consecutive patients with a median age of 54 years who received either PMMA (56/139; 40.3%), PEEK (35/139; 25.2%), CaP-Ti (21/139; 15.1%), ABF (25/139; 18.0%) or HA (2/139; 1.4%) cranial implant after DHC were included in the study. Median time from DHC to CP was 117 days and median follow-up period was 43 months. Surgical site infection was the most frequent surgery-related complication (13.7%; 19/139). PEEK implants were mostly affected (28.6%; 10/35), followed by ABF (20%; 5/25), CaP-Ti implants (9.5%; 2/21) and PMMA implants (1.7%, 1/56). Explantation was necessary for 9 PEEK implants (25.7%; 9/35), 6 ABFs (24.0%; 6/25), 3 CaP-Ti implants (14.3%; 3/21) and 4 PMMA implants (7.1%; 4/56). Besides infection, a postoperative hematoma was the most common cause. Median surgical time was 106 min, neither longer surgical time nor use of anticoagulation were significantly related to higher infection rates (p = 0.547; p = 0.152 respectively). Ventriculoperitoneal shunt implantation prior to CP was noted in 33.8% (47/139) and not significantly associated with surgical related complications. Perioperative lumbar drainage, due to bulging brain, inserted in 38 patients (27.3%; 38/139) before surgery was protective when it comes to explantation of the implant (p = 0.035). Based on our results, CP is still related to a relatively high number of infections and further complications. Implant material seems to have a high effect on postoperative infections, since surgical time, anticoagulation therapy and hydrocephalus did not show a statistically significant effect on postoperative complications in this study. PEEK implants and ABFs seem to possess higher risk of postoperative infection. More biocompatible implants such as CaP-Ti might be beneficial. Further, prospective studies are necessary to answer this question.

COVID-19 effects on the kidney.

Apart from pulmonary disease, acute kidney injury (AKI) is one of the most frequent and most severe organ complications in severe coronavirus disease 2019 (COVID-19). The SARS-CoV­2 virus has been detected in renal tissue. Patients with chronic kidney disease (CKD) before and on dialysis and specifically renal transplant patients represent a particularly vulnerable population. The increasing number of COVID-19 infected patients with renal involvement led to an evolving interest in the analysis of its pathophysiology, morphology and modes of virus detection in the kidney. Meanwhile, there are ample data from several autopsy and kidney biopsy studies that differ in the quantity of cases as well as in their quality. While the detection of SARS-CoV­2 RNA in the kidney leads to reproducible results, the use of electron microscopy for visualisation of the virus is difficult and currently critically discussed due to various artefacts. The exact contribution of indirect or direct effects on the kidney in COVID-19 are not yet known and are currently the focus of intensive research.

[COVID-19 effects on the kidney]. / COVID-19-Auswirkungen auf die Niere.

Apart from pulmonary disease, acute kidney injury (AKI) is one of the most frequent and most severe organ complications in severe coronavirus disease 2019 (COVID-19). The SARS-CoV­2 virus has been detected in renal tissue. Patients with chronic kidney disease (CKD) before and on dialysis and specifically renal transplant patients represent a particularly vulnerable population. The increasing number of COVID-19 infected patients with renal involvement led to an evolving interest in the analysis of its pathophysiology, morphology and modes of virus detection in the kidney. Meanwhile, there are ample data from several autopsy and kidney biopsy studies that differ in the quantity of cases as well as in their quality. While the detection of SARS-CoV­2 RNA in the kidney leads to reproducible results, the use of electron microscopy for visualisation of the virus is difficult and currently critically discussed due to various artefacts. The exact contribution of indirect or direct effects on the kidney in COVID-19 are not yet known and are currently the focus of intensive research.

Associations between the presence of specific antibodies to the West Nile Virus infection and candidate genes in Romanian horses from the Danube delta.

The West Nile virus (WNV) is a mosquito-borne flavivirus causing meningoencephalitis in humans and animals. Due to their particular susceptibility to WNV infection, horses serve as a sentinel species. In a population of Romanian semi-feral horses living in the Danube delta region, we have analyzed the distribution of candidate polymorphic genetic markers between anti WNV-IgG seropositive and seronegative horses. Thirty-six SNPs located in 28 immunity-related genes and 26 microsatellites located in the MHC and LY49 complex genomic regions were genotyped in 57 seropositive and 32 seronegative horses. The most significant association (pcorr < 0.0002) was found for genotypes composed of markers of the SLC11A1 and TLR4 genes. Markers of five other candidate genes (ADAM17, CXCR3, IL12A, MAVS, TNFA), along with 5 MHC class I and LY49-linked microsatellites were also associated with the WNV antibody status in this model horse population. The OAS1 gene, previously associated with WNV-induced clinical disease, was not associated with the presence of anti-WNV antibodies.

Thermal scanning probe lithography for the directed self-assembly of block copolymers.

Thermal scanning probe lithography (t-SPL) is applied to the fabrication of chemical guiding patterns for directed self-assembly (DSA) of block copolymers (BCP). The two key steps of the overall process are the accurate patterning of a poly(phthalaldehyde) resist layer of only 3.5 nm thickness, and the subsequent oxygen-plasma functionalization of an underlying neutral poly(styrene-random-methyl methacrylate) brush layer. We demonstrate that this method allows one to obtain aligned line/space patterns of poly(styrene-block-methyl methacrylate) BCP of 18.5 and 11.7 nm half-pitch. Defect-free alignment has been demonstrated over areas of tens of square micrometres. The main advantages of t-SPL are the absence of proximity effects, which enables the realization of patterns with 10 nm resolution, and its compatibility with standard DSA methods. In the brush activation step by oxygen-plasma exposure, we observe swelling of the brush. This effect is discussed in terms of the chemical reactions occurring in the exposed areas. Our results show that t-SPL can be a suitable method for research activities in the field of DSA, in particular for low-pitch, high-χ BCP to achieve sub-10 nm line/space patterns.

Performance characteristics of the VERSANT hepatitis C virus RNA 1.0 (kPCR) assay.

HCV RNA assays are of central importance for virological diagnostics and for clinical planning and monitoring of an antiviral combination treatment of chronic HCV infections. The objective of the pre-market evaluation of the VERSANT HCV RNA 1.0 Assay (kPCR) was to collect analytical performance data for this new method of HCV RNA quantification and to compare them with the high standards that exist in this context. The assay exhibited a specificity of 100%. The mean intra- and inter-assay imprecision was 14.1% and 14.6%, respectively. The detection limit was determined to be 16IU/ml (95% confidence interval: 11.9-30.6IU/ml) and consequently corresponded to the manufacturer's claims (i.e. 15IU/ml). The test exhibited linearity for all HCV genotypes in a broad range from 15 to 10(8)IU HCV RNA/ml. Hence, the kPCR assay in general is well suitable for HCV RNA determinations in clinical practice. However, in a methodological comparison, a considerable under-quantification of the concentrations of HCV genotype 2 and 3 isolates was detected. Provided that the assay's manufacturer will quickly remedy this shortcoming, the VERSANT HCV RNA 1.0 (kPCR) can be called a completely reliable technique for HCV RNA quantification in routine virological diagnostics.

Wild boars from Sweden, Austria, the Czech Republic and Japan possess intact mannose-binding lectin 2 (MBL2) genes.

The two-nucleotide deletion recently detected in the mannose-binding lectin 2 gene in purebred and crossbred domestic pigs was not found among 68 wild boars representing 4 populations from Europe and Asia. This suggests that the deletion is a result of breeding and/or genetic drift/bottle necks.

MBL1 genotypes in wild boar populations from Sweden, Austria, the Czech Republic, and Japan.

The single nucleotide polymorphism (SNP) G949T in the mannose-binding lectin ( MBL ) 1 gene has been associated with low MBL-A concentration in serum and detected at different frequencies in various European pig populations. However, the origin of this SNP is not known. Part of the MBL1 gene was sequenced in 12 wild boar/Large White crossbred pigs from the second backcross (BC 2 ) generation in a family material originating from two wild boar x Large White intercrosses. Also, MBL-A serum concentration was measured in the entire BC 2 generation (n = 45). Furthermore, the genotypes of 68 wild boars from Sweden, Austria, the Czech Republic, and Japan were determined in regard to five previously described SNPs in MBL1 . The T allele of G949T was present among the BC 2 animals. MBL-A serum concentration in the BC 2 animals showed a bimodal distribution, with one-third of the animals at levels between 0.7 and 1.6 µg mL(-1) and the remaining pigs at levels around 13 µg mL(-1) . There was a co-variation between the presence of the T allele and low MBL-A concentration in serum. The genotyping of the wild boars revealed differences between populations. The T allele of G949T was not detected in the Austrian and Japanese samples and is thus unlikely to be an original feature of wild boars. In contrast, it was present at high frequency (0.35) among the Swedish wild boars, probably representing a founder effect. Five MBL1 haplotypes were resolved. Only two of these were present among the Japanese wild boars compared to four in each of the European populations. This difference may reflect differences in selection pressure and population history.

No evidence of XMRV infection in immunocompromised patients and HIV-positive individuals from Germany.

BACKGROUND: Xenotropic murine leukaemia virus-related virus (XMRV) has been detected in patients with prostate cancer and chronic fatigue syndrome (CFS). The detection of XMRV in healthy individuals has raised concern about a possible virus transmission by blood products. However, recent studies challenge the association between XMRV and human disease. This study investigated whether or not XMRV is present in patients with altered immune function and individuals at increased risk of blood-borne viral infections in Germany. METHODS: We investigated 503 peripheral blood mononuclear cell (PBMC) samples from 240 patients with iatrogenic immune suppression (71 haematopoietic stem cell recipients, 132 solid organ transplant recipients, 37 others) and 311 PBMC samples from 302 patients with HIV-1 infection for the presence of proviral XMRV by real-time polymerase chain reaction (PCR). RESULTS: All 814 PBMC samples from 542 patients tested negative for XMRV DNA and positive for an internal herpesvirus saimiri (HVS) control. Human genomic DNA was detected in all samples, and 90% of the samples contained >10,000 cell equivalents per XMRV PCR reaction. CONCLUSIONS: Our failure to detect proviral XMRV provides evidence against the presence of XMRV in patients at increased risk of viral infections in Germany.

Field stitching in thermal probe lithography by means of surface roughness correlation.

A novel stitching method is presented which does not require special purpose alignment markers and which is particularly adapted to probe lithographic methods, enabling the writing of large patterns exceeding the size limitations imposed by high precision scan stages. The technique exploits the natural roughness of polymeric resist surfaces as a fingerprint marker for the sample position. Theoretical and experimental evidence is provided that sub-nanometer metrological accuracy can be achieved by inspecting the surface roughness in areas with 1 µm linear dimensions. The method has been put to the test in a thermal probe lithography experiment by writing a composite pattern consisting of five 10 µm × 10 µm fields which are seamlessly joined together. The observed stitching error of 10 nm between fields is dominated by inaccuracies of the scanning hardware used in the experiment and is not fundamentally limited by the method per se.

Planetary science: bedrock formation at Meridiani Planum.

The Mars Exploration Rover Opportunity discovered sulphate-rich sedimentary rocks at Meridiani Planum on Mars, which are interpreted by McCollom and Hynek as altered volcanic rocks. However, their conclusions are derived from an incorrect representation of our depositional model, which is upheld by more recent Rover data. We contend that all the available data still support an aeolian and aqueous sedimentary origin for Meridiani bedrock.

Association analyses of porcine SERPINE1 reveal sex-specific effects on muscling, growth, fat accretion and meat quality.

The serpin peptidase inhibitor, clade E (nexin, plasminogen activator inhibitor type 1), member 1 (SERPINE1) gene encodes plasminogen activator inhibitor type 1 (PAI), which is the major physiological inhibitor of tissue-type and urokinase-type plasminogen activators and plays a role in obesity and insulin resistance in women but not in men. We detected SNP FN396538:g.566G>A in intron 3 and a non-synonymous substitution NM_213910:c.612A>G in exon 3 (p.Ile159Val) and mapped the gene to position 8.4 cM on the linkage map of chromosome 3. Association analyses were conducted on the 12th-15th generation of the Meishan × Large White (MLW) cross (n = 565), with records for weight at the end of test, lifetime daily gain, test time daily gain, loin depth and backfat depth, as well as on a European wild boar × Meishan (W × M) F(2) population (n = 333) with 47 traits recorded for carcass composition and meat quality. Analyses performed across the entire MLW population or in the male animals did not show any trait significantly associated with the loci studied. In female animals, both SNPs were associated with loin depth at nominal P < 0.05 with adjusted P values equal to 0.051 (g.566) and 0.057 (c.612). Differences between homozygotes were up to 0.65 SD. In the entire W × M population and female animals, SERPINE1 was significantly associated at adjusted P < 0.05 in descending order with muscling, growth and fat accretion and in male animals with meat quality (R-value). In the studied populations, allele effects were in opposite directions, which implies that the SNPs are markers that are in linkage disequilibrium with a causative mutation.

Four genes located on a SSC2 meat quality QTL region are associated with different meat quality traits in Landrace × Chinese-European crossbred population.

Several quantitative trait loci (QTL) for different meat quality traits have been localized on the q arm of porcine chromosome 2 at position 55-78 cM. Association analyses were performed in a commercial Landrace × Chinese-European (LCE) crossbred population (n = 446) slaughtered at approximately 127 kg and an average age of 198 days with records for performance (growth, fat and meat accretion) and meat quality [intramuscular fat (IMF), Minolta L*, Minolta a*, Minolta b* and pH at 45 m]. Polymorphisms within positional candidate genes cloned from homologous regions on human chromosome 19, ubiquitin-like 5 (UBL5- AM950288:g.566G>A), resistin (RETN- AM157180:g.1473A>G causing substitution p.Ala36Thr), insulin receptor (INSR- AM950289:g.589T>C) and complement factor D (adipsin) (CFD- AM950287:g. 306C>T) were located at positions 62.1, 64.0, 68.0 and 70.7 cM respectively on the current USDA USMARC map of porcine chromosome 2 and had the following allele frequencies in the LCE: UBL5 566G - 0.57; RETN 1473G - 0.84; INSR 589C - 0.70; and CFD 306C - 0.73. The effects of alleles within the candidate genes on the recorded traits were estimated using an animal model. Significant effects (P < 0.05) were found for pH(45) in m. semimembranosus (m. sm.) (UBL5), IMF (RETN) and Minolta L* (RETN, CFD). Differences between phenotypic means of homozygotes at UBL5, RETN and either RETN or CFD explained 0.34 SD for pH(45) in m. sm., 0.47 SD for IMF and 0.68 SD for Minolta L* respectively. Suggestive effects (P < 0.10) on IMF (UBL5, CFD), Minolta a* (INSR, CFD) and Minolta b* (INSR) were also observed. Our results support the localization of further QTL for meat quality traits in this region and suggest that there are several genes affecting different meat quality traits.

Anoxygenic photosynthesis modulated Proterozoic oxygen and sustained Earth's middle age.

Molecular oxygen (O(2)) began to accumulate in the atmosphere and surface ocean ca. 2,400 million years ago (Ma), but the persistent oxygenation of water masses throughout the oceans developed much later, perhaps beginning as recently as 580-550 Ma. For much of the intervening interval, moderately oxic surface waters lay above an oxygen minimum zone (OMZ) that tended toward euxinia (anoxic and sulfidic). Here we illustrate how contributions to primary production by anoxygenic photoautotrophs (including physiologically versatile cyanobacteria) influenced biogeochemical cycling during Earth's middle age, helping to perpetuate our planet's intermediate redox state by tempering O(2) production. Specifically, the ability to generate organic matter (OM) using sulfide as an electron donor enabled a positive biogeochemical feedback that sustained euxinia in the OMZ. On a geologic time scale, pyrite precipitation and burial governed a second feedback that moderated sulfide availability and water column oxygenation. Thus, we argue that the proportional contribution of anoxygenic photosynthesis to overall primary production would have influenced oceanic redox and the Proterozoic O(2) budget. Later Neoproterozoic collapse of widespread euxinia and a concomitant return to ferruginous (anoxic and Fe(2+) rich) subsurface waters set in motion Earth's transition from its prokaryote-dominated middle age, removing a physiological barrier to eukaryotic diversification (sulfide) and establishing, for the first time in Earth's history, complete dominance of oxygenic photosynthesis in the oceans. This paved the way for the further oxygenation of the oceans and atmosphere and, ultimately, the evolution of complex multicellular organisms.

Interlaboratory validation of a hanging pendulum thrust balance for electric propulsion testing.

A hanging pendulum thrust balance has been developed by Imperial College London in collaboration with the European Space Agency (ESA) to characterize a wide range of static fire electric propulsion and chemical micro-propulsion devices with thrust in the range of 1 mN to 1 N. The thrusters under investigation are mounted on a pendulum platform, which is suspended from the support structure using stainless steel flexures. The displacement of the platform is measured using an optical laser triangulation sensor. Thermal stability is ensured by a closed loop self-compensating heating system. The traceability and stability of the calibration are ensured using two separate calibration subsystems: a voice coil actuator and a servomotor pulley system. Two nearly identical thrust balances have been constructed, with one being tested in the Imperial Plasma Propulsion Laboratory and the other in the ESA Propulsion Laboratory. Both balances show a high degree of linearity in the range of 0.5 mN-100 mN. Both instruments have demonstrated a stable calibration over several days, with an estimated standard deviation on thrust measurements better than 0.27 mN for low thrust measurements. The same electric propulsion test article was used during both tests: a Quad Confinement Thruster (QCT) variant called QCT Phoenix. This thruster differed from previous QCT designs by having a newly optimized magnetic topology. The device produced thrust up to 2.21 ± 0.22 mN with a maximum specific impulse of 274 ± 41 s for an anode power range of 50 W-115 W.

Wear-less floating contact imaging of polymer surfaces.

An atomic force microscopy (AFM) technique is described combining two operating modes that previously were mutually exclusive: gentle imaging of delicate surfaces requiring slow dynamic AFM techniques, and passive feedback contact mode AFM enabling ultra-fast imaging. A high-frequency force modulation is used to excite resonant modes in the MHz range of a highly compliant cantilever force sensor with a spring constant of 0.1 N m( - 1). The high-order mode acts as a stiff system for modulating the tip-sample distance and a vibration amplitude of 1 nm is sufficient to overcome the adhesion interaction. The soft cantilever provides a force-controlled support for the vibrating tip, enabling high-speed intermittent contact force microscopy without feedback control of the cantilever bending. Using this technique, we were able to image delicate polymer surfaces and to completely suppress the formation of the ripple wear patterns that are commonly observed in contact AFM.

Probe based surface modification of polymers below 30 nm pitch.

Heated probes are used to modify the surface of polymeric thin films by thermomechanical indentation and local evaporation of material. The resolution of the processes is discussed for probe-storage and surface patterning-applications. As storage densities exceed 1 Tbit/in2, the depth of the indents becomes comparable to the natural surface roughness of the polymer. By templating an atomically flat surface this limitation can be overcome, enabling storage densities of up to 4 Tbit/in2, corresponding to an indentation half-pitch of 7.5 nm.

Porcine NAMPT gene: search for polymorphism, mapping and association studies.

NAMPT encodes an enzyme catalysing the rate-limiting step in NAD biosynthesis. The extracellular form of the enzyme is known as adipokine visfatin. We detected SNP AM999341:g.669T>C (referred to as 669T>C) in intron 9 and SNP FN392209:g.358A>G (referred to as 358A>G) in the promoter of the gene. RH mapping linked the gene to microsatellite SW944. Linkage analysis placed the gene on the current USDA ­ USMARC linkage map at position 92 cM on SSC9. Association analyses were performed in a wild boar × Meishan F2 family (W × M), with 45 traits recorded (growth and fattening, fat deposition, muscling, meat quality, stress resistance and other traits), and in a commercial Landrace × Chinese-European (LCE) synthetic population with records for 15 traits (growth, fat deposition, muscling, intramuscular fat, meat colour and backfat fatty acid content). In the W × M, SNP 669T>C was associated with muscling, fat deposition, growth and fattening, meat quality and other traits and in the LCE with muscling, meat quality and backfat fatty acid composition. In the W × M, SNP 358A>G was associated with muscling, fat deposition, growth and other traits. After correction for multiple testing, the NAMPT haplotypes were associated in the W × M with, in descending order, muscling (q = 0.0056), growth (q = 0.0056), fat deposition (q = 0.0109), fat-to-meat ratio (q = 0.0135), cooling losses (q = 0.0568) and longissimus pHU (q = 0.0695). The SNPs are hypothesized to be in linkage disequilibrium with a causative mutation affecting energy metabolism as a whole rather than fat metabolism alone.

Efficacy of the non-adenosine analogue A1 adenosine receptor agonist (BR-4935) on cardiovascular function after cardiopulmonary bypass.

BACKGROUND: We tested the hypothesis that pharmacological preconditioning with a newly developed, potent non-adenosine analogue A1AdoR agonist (BR-4935) improves biventricular cardiac and endothelial function after cardiopulmonary bypass. METHODS: Twelve anesthetized dogs underwent cardiopulmonary bypass. Dogs were divided into two groups: group 1 (n = 6) received saline vehicle, group 2 (n = 6) received BR-4935 before cardiopulmonary bypass. Biventricular hemodynamic variables were measured using a combined pressure-volume conductance catheter. Coronary blood flow, ATP content, malondialdehyde and myeloperoxidase levels and vasodilatative responses to acetylcholine and sodium nitroprusside were also determined. RESULTS: Administration of the A1AdoR agonist led to a significantly better recovery of left and right ventricular systolic function after 60 minutes of reperfusion. Although the vasodilatative response to sodium nitroprusside was similar in both groups, acetylcholine resulted in a significantly greater increase in coronary blood flow in the BR-4935 group. In addition, the ATP content was significantly higher in the same group. Furthermore, malondialdehyde and myeloperoxidase levels significantly decreased in the A1AdoR group. CONCLUSION: Pharmacological preconditioning with a new, potent non-adenosine analogue A1AdoR agonist improves biventricular function recovery and endothelial function after hypothermic cardiac arrest.

Multi Tbit/in(2) storage densities with thermomechanical probes.

Exploiting the spatial resolution of scanning probes presents an attractive approach for novel data storage technologies in particular for large-scale data repositories because of their inherent potential for high storage density. We show that multi-Tbit/in(2) density can be achieved by means of thermomechanically embossing the information as indentation marks into a polymer film. The data density is determined by the nonlinear interaction between closely spaced indents and the fundamental scaling relations governing the shape and size of the indents. We find that cooperative effects in polymers give rise to a minimum indentation radius on the order of the correlation length of the cooperatively rearranged region even if formed by an infinitely sharp indenter. Thus, cooperativity coupled to alpha-transitions in polymers is evinced in a real space geometrical experiment. Furthermore, we predict that indentation marks cannot be made smaller than 5 nm in diameter, which limits the feature resolution for embossing technologies in general.