Kinetic Modeling Analysis of Ar Addition to Atmospheric Pressure N2-H2 Plasma for Plasma-Assisted Catalytic Synthesis of NH3.

Zero-dimensional kinetic modeling of atmospheric pressure Ar-N2-H2 nonthermal plasma was carried out to gain mechanistic insights into plasma-assisted catalytic synthesis of ammonia. Ar dilution is a common technique for tailoring plasma discharge properties and has been shown to enhance NH3 formation when added to N2-H2 plasma. The kinetic model was developed for a coaxial dielectric barrier discharge quartz wool-packed bed reactor operating at near room temperature using a kHz-frequency plasma source. With 30% Ar mixed in a 1:1 N2-H2 plasma at 760 Torr, we find that NH3 production is dominated by Eley-Rideal (E-R) surface reactions, which heavily involve surface NHx species derived from N and H radicals in the gas phase, while the influence of excited N2 molecules is negligible. This is contrary to the commonly proposed mechanism that excited N2 molecules created by Penning excitation of N2 by Ar(4s) and Ar(4p) play a significant role in assisting NH3 formation. Our model shows that the enhanced NH3 formation upon Ar dilution is unlikely due to the interactions between Ar and H species, as excited Ar atoms have a weak effect on H radical formation through H2 dissociation compared to electrons. We find that excited Ar atoms contribute to 28% of the N radical production in the gas phase via N2 dissociation, while the rest are dominated by electron-impact dissociation. Furthermore, Ar species play a negligible role in the product NH3 dissociation. N2 conversion sensitivity analyses were carried out for electron number density (ne) and reduced electric field (E/N), and contributions from Ar to gas-phase N radical production were quantified. The model can provide guidance on potential reasons for observing enhanced NH3 formation upon Ar dilution in N2-H2 plasma beyond changes in the discharge characteristics.

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction.

Immobilization of porphyrin complexes into crystalline metal-organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO2 electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO2 electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO2 mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO2 electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO2 mass transfer as the potential increased from -0.6 V to -1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO2 electroreduction mechanisms on PCN-222(Fe) MOFs.

Effect of Porous Catalyst Support on Plasma-Assisted Catalysis for Ammonia Synthesis.

We report on the effect of catalyst support particle porosity on the conversion of NH3 synthesis from N2 and H2 in a coaxial dielectric barrier discharge (DBD) plasma reactor. The discharge was created using an AC applied voltage with the reactor at room temperature and near atmospheric pressure (550 Torr). Two different particles of almost equal diameter (∼1.5 mm)─porous silica (SiO2) ceramic beads (average pore size: 8 nm) and smooth, nonporous soda lime glass beads─were compared in the DBD reactor. As the pore size in the SiO2 particles was smaller than the Debye length, penetration of the plasma into the pores of the particles was unlikely; however, reactive species generated in the plasma outside the particles could diffuse into the pores. The N2 conversion and energy yield of NH3 increased with applied voltage for both particle types, and these values were consistently higher when using the SiO2 beads. Discharge and plasma properties were estimated from Lissajous plots and using calculations with the BOLSIG+ software. The effect of these two different catalyst supports on the physical properties of the discharge was negligible. High resolution optical emission spectra revealed that the concentrations of N2+, atomic N, and atomic H (Hα, Hß) in the plasma discharge were lower with the porous SiO2 beads than with the glass beads at every applied voltage tested. This indicates that these active species participate in heterogeneous reactions at support particle surfaces and that the larger surface area presented by the porous particles led to higher rates of depletion of these intermediates and a higher rate of ammonia synthesis.

Increasing Iridium Oxide Activity for the Oxygen Evolution Reaction with Hafnium Modification.

Synthesis and implementation of highly active, stable, and affordable electrocatalysts for the oxygen evolution reaction (OER) is a major challenge in developing energy efficient and economically viable energy conversion devices such as electrolyzers, rechargeable metal-air batteries, and regenerative fuel cells. The current benchmark electrocatalyst for OER is based on iridium oxide (IrOx) due to its superior performance and excellent stability. However, large scale applications using IrOx are impractical due to its low abundance and high cost. Herein, we report a highly active hafnium-modified iridium oxide (IrHfxOy) electrocatalyst for OER. The IrHfxOy electrocatalyst demonstrated ten times higher activity in alkaline conditions (pH = 11) and four times higher activity in acid conditions (pH = 1) than a IrOx electrocatalyst. The highest intrinsic mass activity of the IrHfxOy catalyst in acid conditions was calculated as 6950 A gIrOx-1 at an overpotential (η) of 0.3 V. Combined studies utilizing operando surface enhanced Raman spectroscopy (SERS) and DFT calculations revealed that the active sites for OER are the Ir-O species for both IrOx and IrHfxOy catalysts. The presence of Hf sites leads to more negative charge states on nearby O sites, shortening of the bond lengths of Ir-O, and lowers free energies for OER intermediates that accelerate the OER process.

Acetic Acid Adsorption and Reactions on Ni(110).

Acetic acid adsorption and reactions at multiple surface coverage values on Ni(110) were studied with temperature-programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS) at 90-500 K. The experimental measurements were interpreted with density functional theory (DFT) calculations that provided information on adsorbate geometries, energies, and vibrational modes. Below the monolayer saturation coverage of 0.36 ML at 90 K, acetic acid adsorbs mostly molecularly. Above this coverage, a physisorbed layer is formed with dimers and catemers, without detectable monomers. Dimers and catemers desorb as molecular acetic acid at 157 and 172 K, respectively. Between 90 and 200 K, the O-H bond in acetic acid breaks to form bridge-bonded bidentate acetate that becomes the dominant surface species. Desorption-limited hydrogen evolution is observed at 265 K. However, even after the acetate formation, acetic acid desorbs molecularly at 200-300 K due to recombination. Minor surface species observed at 200 K, acetyls or acetates with a carbonyl group, decompose below 350 K and generate adsorbed carbon monoxide. At 350 K, the surface likely undergoes restructuring, the extent of which increases with acetic acid coverage. The initial dominant bridge-bonded bidentate acetate species formed below 200 K remain on the surface, but they now mostly adsorb on the restructured sites. The acetates and all other remaining hydrocarbon species decompose simultaneously at 425 K in a narrow temperature range with concurrent evolution of hydrogen, carbon monoxide, and carbon dioxide. Above 425 K, only carbon remains on the surface.

Self-assembling of formic acid on the partially oxidized p(2 × 1) Cu(110) surface reconstruction at low coverages.

Carbon dioxide (CO2) reduction for synthetic fuel generation could be an integral part of a sustainable energy future. Copper (Cu) is the leading electrocatalyst for CO2 reduction to produce multiple C-containing products such as C1 and C2 hydrocarbons and oxygenates. Understanding the mechanisms leading to their production could help optimize these pathways further. Adsorption studies of the many possible intermediates on well-characterized surfaces are crucial to elucidating these mechanisms. In this work, we explore the adsorption configurations of formic acid (HCOOH) on the surface of the partially oxidized p(2 × 1) reconstruction of the Cu(110) surface, using low-temperature scanning tunneling and atomic force microscopy, in conjunction with density functional theory modeling. We find that HCOOH adsorbs favorably on the CuO chain comprising the reconstruction. The adsorption interactions involve dative bonding of the carbonyl O to the oxidized Cu and hydrogen bonding of the OH group to the surface O or to an adjacently adsorbed HCOOH molecule. Cooperative adsorption of the molecules occurs, forming two- to three-molecule-long oligomer chains, facilitated by intermolecular hydrogen bonding and mutual polarization of the CuO acid-base adsorption sites.

Hydrogenation of CO to Methanol on Ni(110) through Subsurface Hydrogen.

We present a combined theoretical and experimental study of CO hydrogenation on a Ni(110) surface, including studies of the role of gas-phase atomic hydrogen, surface hydrogen, and subsurface hydrogen reacting with adsorbed CO. Reaction mechanisms leading both to methane and methanol are considered. In the reaction involving surface or subsurface hydrogen, we investigate four possible pathways, using density functional theory to characterize the relative energetics of each intermediate, including the importance of further hydrogenation versus C-O bond breaking, where the latter may lead to methane production. The most energetically favorable outcome is the production of methanol along a pathway involving the sequential hydrogenation of CO to a H3CO* intermediate, followed by a final hydrogenation to give methanol. In addition, we find that subsurface hydrogen noticeably alters reaction barriers, both passively and through the energy released by diffusion to the surface. Indeed, the effective reaction barriers are even lower than for CO methanolation on Cu(211) and Cu(111) than for Ni(110). In studies of gas-phase H atoms impinging on a CO-adsorbed Ni(110) surface, Born-Oppenheimer molecular dynamics simulations show that direct impact of H is unlikely to result in hydrogenation of CO. This means that Eley-Rideal or hot-atom mechanisms are not important; thus, thermal reactions involving subsurface hydrogen are the primary reaction mechanisms leading to methanol. Finally, we demonstrate experimentally for the first time the production of methanol and formaldehyde from CO hydrogenation on Ni(110) and confirm the role of subsurface hydrogen in the mechanism of this reaction.

The promoting effect of tetravalent cerium on the oxygen evolution activity of copper oxide catalysts.

A new catalyst is presented for the oxygen evolution reaction (OER) based on cerium-modified copper oxide (CuOx) prepared using a facile electrodeposition procedure. Incorporation of Ce into CuOx leads to greatly improved OER activity, which reached an optimal value at a surface concentration of 6.9 at% Ce. Specifically, the OER current density at 400 mV overpotential for the most active Ce-modified CuOx catalyst (6.9 at% Ce) was 3.3 times greater compared to the pure CuOx. Coincident with the improved OER activity, Ce incorporation also leads to significant structural changes that manifested in increasing degrees of disorder. A further increase in the Ce concentration led to a decrease in the OER performance which can be attributed to the formation of a segregated CeO2 phase. A strong correlation was observed between the OER performance and tetravalent Ce (Ce4+) ion concentration, up to a concentration corresponding to CeO2 phase segregation. No particular trend was observed for the OER activity of these Ce-modified CuOx catalysts with respect to the surface concentration of Cu ions, surface oxygen species or catalyst structure. The stability of these CuOx catalysts at 5 mA cm-2 was also improved with Ce incorporation, and the overpotential required to sustain this current density is much lower than that of pure CuOx. Overall, this study provides new insights regarding the promoting effect of tetravalent Ce ions on the OER activity of CuOx-based OER catalysts in alkaline electrolytes.

Facet-dependent activity and stability of Co3O4 nanocrystals towards the oxygen evolution reaction.

The electrocatalytic activities and stabilities of spinel cobalt oxides with different morphologies have been investigated for the oxygen evolution reaction (OER) in an alkaline environment. Spinel cobalt oxide nanoparticles with well-defined cubic and octahedral morphologies were prepared, which predominantly expose the (100) and (111) surfaces, respectively. The OER activity of spinel cobalt oxide, measured in terms of current density, increases with higher relative proportion of the (111) surface, which can be attributed to the higher density of cobalt ions on the (111) surface compared to that on the (100) surface. The surfaces of cobalt oxide nanocubes are slighted reduced compared to those of nanooctahedra prior to OER testing. Based on chronoamperometry experiments, the nanocubes exhibited higher stability compared to the nanooctahedra, which could be due to the lower surface energy of the (100) surface compared to the (111) surface. The dependence of OER activity and stability on spinel cobalt oxide crystal facets demonstrates the importance of surface orientation in catalyst performance optimization.

The (0001) surfaces of α-Fe2O3 nanocrystals are preferentially activated for water oxidation by Ni doping.

Photoelectrochemical water oxidation on hematite has been extensively studied, yet the relationship between the various facets exposed, heteroatom doping, and associated electrocatalytic activity has not been adequately explored. Here, hematite nanocrystals were synthesized with continuous tuning of the aspect-ratio and fine control of the surface area ratio of the (0001) facet with respect to other surfaces. The samples were doped with nickel, which was confirmed using the combined results of HRTEM, SEM, XRD, Raman, BET, and XPS measurements. The surface area ratio of the hexagonal (0001) surface with respect to all surfaces was tuned from 98% to 30%. Ni doping was accomplished by diffusion of Ni clusters into the subsurface region, which forms a uniformly doped NixFe2-xO3 surface overlayer that improves the electrocatalytic activity of water oxidation. These results are discussed in the context of a theoretical prediction and subsequent surface science validation that Ni doping facilitates the water oxidation reaction on hematite (0001) surfaces. Electrochemical testing of water oxidation catalysis was carried out on doped and shape-controlled hematite nanocrystals. The enhancement of water oxidation activity by Ni-doping increased as the surface area ratio of the (0001) facet of hematite nanocrystals increased, consistent with the theoretical predictions and surface science studies.

Hydrogen-bonded cyclic water clusters nucleated on an oxide surface.

We report the observation and molecular-scale scanning probe electronic structure (dI/dV) mapping of hydrogen-bonded cyclic water clusters nucleated on an oxide surface. The measurements are made on a new type of cyclic water cluster that is characterized by simultaneous and cooperative bonding interactions among molecules as well as with both metal and oxygen sites of an oxide surface. Density functional theory + U + D calculations confirm the stability of these clusters and are used to discuss other potential water-oxide bonding scenarios. The calculations show that the spatial distributions of electronic states in the system are similar in character to those of the lowest unoccupied molecular orbitals of hydrogen-bonded water molecules. On the partially oxidized Cu(111) investigated here, experiment and theory together suggest that Cu vacancies in the growing islands of cuprous oxide inhibit water adsorption in the centers of the islands (which have reached thermodynamic equilibrium). A stoichiometric, less stable cuprous oxide likely exists at island edges (the growth front) and selectively binds these water clusters.

WO3-α-Fe2O3 composite photoelectrodes with low onset potential for solar water oxidation.

The physical and photoelectrochemical properties of a composite oxide photoelectrode comprised of α-Fe2O3 and WO3 crystals is investigated. The composite films exhibit a water oxidation photocurrent onset potential as low as 0.43 V vs. RHE, a value considerably lower than that of pure α-Fe2O3 photoanodes prepared in comparable synthesis conditions. This result represents one of the lowest onset potentials measured for hematite-based PEC water oxidation systems. Compositional analysis by X-ray Photoelectron Spectroscopy and Energy Dispersive Spectroscopy indicates the composition of the films differs between the surfaces and bulk, with tungsten found to be concentrated in the surface region. Post-reaction Raman spectroscopy characterization demonstrates that water interacts with surface WO3 crystals, an event that is associated with the formation of a hydrated form of the oxide.

Geometric requirements for hydrocarbon catalytic sites on platinum surfaces.

Vibrational spectroscopic measurements and density functional calculations were used to identify a preferential catalytic mechanism for the transformation of acetylene, HC-CH, to vinylidene, C-CH2, on surfaces of Pt-Sn ordered alloys. In this mechanism, two adjacent Pt atoms adsorb an acetylene molecule and a third neighboring Pt atom is required for stabilizing the reacting H atom during the transformation. Therefore, unlike a direct H shift along the C-C bond in organometallic compounds with a single transition-metal atom, this mechanism has a geometric site requirement of three adjacent Pt atoms in the form of a three-fold site. The same geometric site requirement is identified for preferential C-H bond cleavage of acetylene with the formation of adsorbed C-CH and H species. In the absence of three-fold Pt sites, the reaction mechanism changes, and reactions of H transfer and C-H bond cleavage are suppressed.

Alloy formation and chemisorption at Zn/Pt(111) bimetallic surfaces using alkali ISS, XPD, and TPD.

Alloy formation and chemisorption at bimetallic surfaces formed by vapor-depositing Zn on a Pt(111) single crystal were investigated primarily by using X-ray photoelectron diffraction (XPD), X-ray photoelectron spectroscopy (XPS), low-energy alkali ion scattering spectroscopy (ALISS), low electron energy diffraction (LEED), and temperature programmed desorption (TPD). A wide range of conditions were investigated to explore whether deposition and annealing of Zn films could produce well-defined, ordered alloy surfaces, similar to those encountered for Sn/Pt(111) surface alloys. These attempts were unsuccessful, although weak, diffuse (2 × 2) spots were observed under special conditions. The particular PtZn bimetallic alloy created by annealing one monolayer of Zn on Pt(111) at 600 K, which has a Zn composition in the surface layer of about 5 at. %, was investigated in detail by using XPD and ALISS. Only a diffuse (1 × 1) pattern was observed from this surface by LEED, suggesting that no long-range, ordered alloy structure was formed. Zn atoms were substitutionally incorporated into the Pt(111) crystal to form a near-surface alloy in which Zn atoms were found to reside primarily in the topmost and second layers. The alloyed Zn atoms in the topmost layer are coplanar with the Pt atoms in the surface layer, without any "buckling" of Zn, that is, displacement in the vertical direction. This result is expected because of the similar size of Pt and Zn, based on previous studies of bimetallic Pt alloys. Zn atoms desorb upon heating rather than diffusing deep into the bulk of the Pt crystal. Temperature programmed desorption (TPD) measurements show that both CO and NO have lower desorption energies on the PtZn alloy surface compared to that on the clean Pt(111) surface.

Ion concentration ratio measurements of ion beams generated by a commercial microwave electron cyclotron resonance plasma source.

A commercially available electron cyclotron resonance (ECR) plasma source (GenII Plasma Source, tectra GmbH) is widely used for surface processing. This plasma source is compatible with ultrahigh vacuum systems, and its working pressure is relatively low, around 10-6-10-4 Torr even without differential pumping. Here, we report ion flux concentration ratios for each ion species in an ion beam from this source, as measured by a mass/energy analyzer that is a combination of a quadrupole mass spectrometer, an electrostatic energy analyzer, and focusing ion optics. The examined beams were those arising from plasmas produced from feed gases of H2, D2, N2, O2, Ar, and dry air over a range of input power and working pressures. H2(D2) plasmas are widely used for nuclear fusion applications and, hence, the ion concentration ratios of H+, H2+, and H3+ reported here will be useful information for research that applies this plasma source to well-controlled plasma-material interaction studies. Ion energy distributions, stability of operation, and impurity concentrations were also assessed for each of the plasma species investigated.

Enhanced Feammox activity and perfluorooctanoic acid (PFOA) degradation by Acidimicrobium sp. Strain A6 using PAA-coated ferrihydrite as an electron acceptor.

Acidimicrobium sp. Strain A6 (A6) can degrade perfluoroalkyl acids (PFAAs) by oxidizing NH4+ while reducing Fe(Ⅲ). However, supplying and distributing Fe(III) phases in sediments is challenging since surface charges of Fe(III)-phases are typically positive while those of sediments are negative. Therefore, ferrihydrite particles were coated with polyacrylic acid (PAA) with four different molecular weights, resulting in a negative zeta potential on their surface. Zeta potential was determined as a function of pH and PAA loading, with the lowest value observed when the PAA/ferrihydrite ratio was > 1/5 (w/w) at a pH of 5.5. Several 50-day incubations with an A6-enrichment culture were conducted to determine the effect of PAA-coated ferrihydrite as the electron acceptor of A6 on the Feammox activity and PFOA degradation. NH4+ oxidation, PFOA degradation, production of shorter-chain PFAS, and F- were observed in all PAA-coated samples. The 6 K and 450 K treatments exhibited significant reductions in PFOA concentration and substantial F- production compared to incubations with bare ferrihydrite. Electrochemical impedance spectroscopy showed lowered charge transfer resistance in the presence of PAA-coated ferrihydrite, indicating that PAAs facilitated electron transfer to ferrihydrite. This study highlights the potential of PAA-coated ferrihydrite in accelerating PFAS defluorination, providing novel insights for A6-based bioremediation strategies.

Intraparticle reduction of arsenite (As(III)) by nanoscale zerovalent iron (nZVI) investigated with In Situ X-ray absorption spectroscopy.

While a high efficiency of contaminant removal by nanoscale zerovalent iron (nZVI) has often been reported for several contaminants of great concern, including aqueous arsenic species, the transformations and translocation of contaminants at and within the nanoparticles are not clearly understood. By analysis using in situ time-dependent X-ray absorption spectroscopy (XAS) of the arsenic core level for nZVI in anoxic As(III) solutions, we have observed that As(III) species underwent two stages of transformation upon adsorption at the nZVI surface. The first stage corresponds to breaking of As-O bonds at the particle surface, and the second stage involves further reduction and diffusion of arsenic across the thin oxide layer enclosing the nanoparticles, which results in arsenic forming an intermetallic phase with the Fe(0) core. Extended X-ray absorption fine-structure (EXAFS) data from experiments conducted at different iron/arsenic ratios indicate that the reduced arsenic species tend to be enriched at the surface of the Fe(0) core region and had limited mobility into the interior of the metal core within the experimental time frame (up to 22 h). Therefore, there was an accumulation of partially reduced arsenic at the Fe(0)/oxide interface when a relatively large arsenic content was present in the solid phase. These results illuminate the role of intraparticle diffusion and reduction in affecting the chemical state and spatial distribution of arsenic in nZVI materials.

Spectroscopic observation and structure-insensitivity of hydroxyls on gold.

The O-H stretching vibration of surface hydroxyls remained at 3691 cm-1 for gold structures ranging in size from clusters to nanoparticles, to non-flat bulk surfaces. In contrast, this vibration was not observed on flat gold surfaces. Therefore, this vibration can serve as an indicator of the roughness of the gold surface and associated functional properties, such as catalytic activity.

Adsorption and decomposition of cyclohexanone (C6H10O) on Pt(111) and the (2 × 2) and (√3 × âˆš3)r30°-Sn/Pt(111) surface alloys.

Adsorption and decomposition of cyclohexanone (C(6)H(10)O) on Pt(111) and on two ordered Pt-Sn surface alloys, (2 × 2)-Sn/Pt(111) and (√3 × âˆš3)R30°-Sn/Pt(111), formed by vapor deposition of Sn on the Pt(111) single crystal surface were studied with TPD, HREELS, AES, LEED, and DFT calculations with vibrational analyses. Saturation coverage of C(6)H(10)O was found to be 0.25 ML, independent of the Sn surface concentration. The Pt(111) surface was reactive toward cyclohexanone, with the adsorption in the monolayer being about 70% irreversible. C(6)H(10)O decomposed to yield CO, H(2)O, H(2), and CH(4). Some C-O bond breaking occurred, yielding H(2)O and leaving some carbon on the surface after TPD. HREELS data showed that cyclohexanone decomposition in the monolayer began by 200 K. Intermediates from cyclohexanone decomposition were also relatively unstable on Pt(111), since coadsorbed CO and H were formed below 250 K. Surface Sn allowed for some cyclohexanone to adsorb reversibly. C(6)H(10)O dissociated on the (2 × 2) surface to form CO and H(2)O at low coverages, and methane and H(2) in smaller amounts than on Pt(111). Adsorption of cyclohexanone on (√3 × âˆš3)R30°-Sn/Pt(111) at 90 K was mostly reversible. DFT calculations suggest that C(6)H(10)O adsorbs on Pt(111) in two configurations: by bonding weakly through oxygen to an atop Pt site and more strongly through simultaneously oxygen and carbon of the carbonyl to a bridged Pt-Pt site. In contrast, on alloy surfaces, C(6)H(10)O bonds preferentially to Sn. The presence of Sn, furthermore, is predicted to make the formation of the strongly bound C(6)H(10)O species bonding through O and C, which is a likely decomposition precursor, thermodynamically unfavorable. Alloying with Sn, thus, is shown to moderate adsorptive and reactive activity of Pt(111).

Improving electrocatalysts for O(2) reduction by fine-tuning the Pt-support interaction: Pt monolayer on the surfaces of a Pd(3)Fe(111) single-crystal alloy.

We improved the effectiveness of Pt monolayer electrocatalysts for the oxygen-reduction reaction (ORR) using a novel approach to fine-tuning the Pt monolayer interaction with its support, exemplified by an annealed Pd(3)Fe(111) single-crystal alloy support having a segregated Pd layer. Low-energy ion scattering and low-energy electron diffraction studies revealed that a segregated Pd layer, with the same structure as Pd (111), is formed on the surface of high-temperature-annealed Pd(3)Fe(111). This Pd layer is considerably more active than Pd(111); its ORR kinetics is comparable to that of a Pt(111) surface. The enhanced catalytic activity of the segregated Pd layer compared to that of bulk Pd apparently reflects the modification of Pd surface's electronic properties by underlying Fe. The Pd(3)Fe(111) suffers a large loss in ORR activity when the subsurface Fe is depleted by potential cycling (i.e., repeated excursions to high potentials in acid solutions). The Pd(3)Fe(111) surface is an excellent substrate for a Pt monolayer ORR catalyst, as verified by its enhanced ORR kinetics on PT(ML)/Pd/Pd(3)Fe(111). Our density functional theory studies suggest that the observed enhancement of ORR activity originates mainly from the destabilization of OH binding and the decreased Pt-OH coverage on the Pt/Pd/Pd(3)Fe(111) surface. The activity of Pt(ML)/Pd(111) and Pt(111) is limited by OH removal, whereas the activity of Pt(ML)/Pd/Pd(3)Fe(111) is limited by the O-O bond scission, which places these two surfaces on the two sides of the volcano plot.