RESUMO
Increasing evidence suggests that the chronicity of wounds is associated with the presence of bacterial biofilms. Therefore, novel wound care products are being developed, which can inhibit biofilm formation and/or treat already formed biofilms. A lack of standardized assays for the analysis of such novel antibacterial drug delivery systems enhances the need for appropriate tools and models for their characterization. Herein, we demonstrate that optimized and biorelevant in vitro and ex vivo wound infection and biofilm models offer a convenient approach for the testing of novel antibacterial wound dressings for their antibacterial and antibiofilm properties, allowing one to obtain qualitative and quantitative results. The in vitro model was developed using an electrospun (ES) thermally crosslinked gelatin-glucose (GEL-Glu) matrix and an ex vivo wound infection model using pig ear skin. Wound pathogens were used for colonization and biofilm development on the GEL-Glu matrix or pig skin with superficial burn wounds. The in vitro model allowed us to obtain more reproducible results compared with the ex vivo model, whereas the ex vivo model had the advantage that several pathogens preferred to form a biofilm on pig skin compared with the GEL-Glu matrix. The in vitro model functioned poorly for Staphylococcus epidermidis biofilm formation, but it worked well for Escherichia coli and Staphylococcus aureus, which were able to use the GEL-Glu matrix as a nutrient source and not only as a surface for biofilm growth. On the other hand, all tested pathogens were equally able to produce a biofilm on the surface of pig skin. The developed biofilm models enabled us to compare different ES dressings [pristine and chloramphenicol-loaded polycaprolactone (PCL) and PCL-poly(ethylene oxide) (PEO) (PCL/PEO) dressings] and understand their biofilm inhibition and treatment properties on various pathogens. Furthermore, we show that biofilms were formed on the wound surface as well as on a wound dressing, indicating that the demonstrated methods mimic well the in vivo situation. Colony forming unit (CFU) counting and live biofilm matrix as well as bacterial DNA staining together with microscopic imaging were performed for biofilm quantification and visualization, respectively. The results showed that both wound biofilm models (in vitro and ex vivo) enabled the evaluation of the desired antibiofilm properties, thus facilitating the design and development of more effective wound care products and screening of various formulations and active substances.
Assuntos
Antibacterianos , Infecção dos Ferimentos , Suínos , Animais , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Cloranfenicol/farmacologia , Infecção dos Ferimentos/microbiologia , Biofilmes , BandagensRESUMO
Azithromycin is a clinically important drug for treating invasive salmonellosis despite poor activity in laboratory assays for MIC. Addition of the main buffer in blood, bicarbonate, has been proposed for more physiologically relevant and more predictive testing conditions. However, we show here that bicarbonate-triggered lowering of azithromycin MIC is entirely due to alkalization of insufficiently buffered media. In addition, bicarbonate is unlikely to be altering efflux pump activity.
Assuntos
Anti-Infecciosos , Azitromicina , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Azitromicina/farmacologia , Bicarbonatos/farmacologia , Meios de Cultura , Testes de Sensibilidade MicrobianaRESUMO
The Coronavirus disease 2019 (COVID-19) emergency has demonstrated that the utilization of face masks plays a critical role in limiting the outbreak. Healthcare professionals utilize masks all day long without replacing them very frequently, thus representing a source of cross-infection for patients and themselves. Nanotechnology is a powerful tool with the capability to produce nanomaterials with unique physicochemical and antipathogen properties. Here, how to realize non-disposable and highly comfortable respirators with light-triggered self-disinfection ability by bridging bioactive nanofiber properties and stimuli-responsive nanomaterials is outlined. The visionary road highlighted in this Concept is based on the possibility of developing a new generation of masks based on multifunctional membranes where the presence of nanoclusters and plasmonic nanoparticles arranged in a hierarchical structure enables the realization of a chemically driven and on-demand antipathogen activities. Multilayer electrospun membranes have the ability to dissipate humidity present within the mask, enhancing the wearability and usability. The photothermal disinfected membrane is the core of these 3D printed and reusable masks with moisture pump capability. Personalized face masks with smart nano-assisted destruction of pathogens will bring enormous advantages to the entire global community, especially for front-line personnel, and will open up great opportunities for innovative medical applications.
Assuntos
COVID-19 , Humanos , Máscaras , SARS-CoV-2RESUMO
Berberine (BBR) is a poorly water-soluble quaternary isoquinoline alkaloid of plant origin with potential uses in the drug therapy of hypercholesterolemia. To tackle the limitations associated with the oral therapeutic use of BBR (such as a first-pass metabolism and poor absorption), BBR-loaded liposomes were fabricated by ethanol-injection and thin-film hydration methods. The size and size distribution, polydispersity index (PDI), solid-state properties, entrapment efficiency (EE) and in vitro drug release of liposomes were investigated. The BBR-loaded liposomes prepared by ethanol-injection and thin-film hydration methods presented an average liposome size ranging from 50 nm to 244 nm and from 111 nm to 449 nm, respectively. The PDI values for the liposomes were less than 0.3, suggesting a narrow size distribution. The EE of liposomes ranged from 56% to 92%. Poorly water-soluble BBR was found to accumulate in the bi-layered phospholipid membrane of the liposomes prepared by the thin-film hydration method. The BBR-loaded liposomes generated by both nanofabrication methods presented extended drug release behavior in vitro. In conclusion, both ethanol-injection and thin-film hydration nanofabrication methods are feasible for generating BBR-loaded oral liposomes with a uniform size, high EE and modified drug release behavior in vitro.
Assuntos
Berberina/administração & dosagem , Berberina/química , Composição de Medicamentos , Lipossomos , Nanopartículas , Administração Oral , Fenômenos Químicos , Lipossomos/química , Estrutura Molecular , Nanopartículas/química , Nanopartículas/ultraestrutura , Tamanho da Partícula , SolubilidadeRESUMO
Printing technology has been shown to enable flexible fabrication of solid dosage forms for personalized drug therapy. Several methods can be applied for tailoring the properties of the printed pharmaceuticals. In this study, the use of electrospun fibrous substrates in the fabrication of inkjet-printed dosage forms was investigated. A single-drug formulation with lidocaine hydrochloride (LH) and a combination drug system containing LH and piroxicam (PRX) for oromucosal administration were prepared. The LH was deposited on the electrospun and cross-linked gelatin substrates by inkjet printing, whereas PRX was incorporated within the substrate fibers during electrospinning. The solid state analysis of the electrospun substrates showed that PRX was in an amorphous state within the fibers. Furthermore, the results indicated the entrapment and solidification of the dissolved LH within the fibrous gelatin matrix. The printed drug amount (2-3 mg) was in good correlation with the theoretical dose calculated based on the printing parameters. However, a noticeable degradation of the printed LH was detected after a few months. An immediate release (over 85% drug release after 8 min) of both drugs from the printed dosage forms was observed. In conclusion, the prepared electrospun gelatin scaffolds were shown to be suitable substrates for inkjet printing of oromucosal formulations. The combination of electrospinning and inkjet printing allowed the preparation of a dual drug system.
Assuntos
Mucosa Bucal/metabolismo , Piroxicam/química , Administração Oral , Química Farmacêutica/métodos , Formas de Dosagem , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos , Gelatina/química , Lidocaína/química , Impressão/métodos , Propriedades de Superfície , Tecnologia Farmacêutica/métodosRESUMO
Antibacterial drug-loaded electrospun nano- and microfibrous dressings are of major interest as novel topical drug delivery systems in wound care. In this study, chloramphenicol (CAM)-loaded polycaprolactone (PCL) and PCL/poly(ethylene oxide) (PEO) fiber mats were electrospun and characterized in terms of morphology, drug distribution, physicochemical properties, drug release, swelling, cytotoxicity, and antibacterial activity. Computational modeling together with physicochemical analysis helped to elucidate possible interactions between the drug and carrier polymers. Strong interactions between PCL and CAM together with hydrophobicity of the system resulted in much slower drug release compared to the hydrophilic ternary system of PCL/PEO/CAM. Cytotoxicity studies confirmed safety of the fiber mats to murine NIH 3T3 cells. Disc diffusion assay demonstrated that both fast and slow release fiber mats reached effective concentrations and had similar antibacterial activity. A biofilm formation assay revealed that both blank matrices are good substrates for the bacterial attachment and formation of biofilm. Importantly, prolonged release of CAM from drug-loaded fibers helps to avoid biofilm formation onto the dressing and hence avoids the treatment failure.
Assuntos
Antibacterianos/farmacologia , Fenômenos Fisiológicos Bacterianos/efeitos dos fármacos , Biofilmes/efeitos dos fármacos , Cloranfenicol/farmacologia , Infecção dos Ferimentos/tratamento farmacológico , Animais , Bandagens , Química Farmacêutica , Cloranfenicol/uso terapêutico , Preparações de Ação Retardada/farmacologia , Preparações de Ação Retardada/uso terapêutico , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Modelos Químicos , Simulação de Dinâmica Molecular , Nanofibras/química , Nanotecnologia , Poliésteres/química , Infecção dos Ferimentos/microbiologiaRESUMO
The isolation and physical material properties of suberin fatty acids (SFAs) were investigated with special reference to their potential applications as novel pharmaceutical excipients. SFAs were isolated from outer birch bark (OBB) with a new extractive hydrolysis method. The present simplified isolation process resulted in a moderate batch yield and chemical purity of SFAs, but further development is needed for establishing batch-to-batch variation. Cryogenic milling was the method of choice for the particle size reduction of SFAs powder. The cryogenically milled SFAs powder exhibited a semicrystalline structure with apparent microcrystalline domains within an amorphous fatty acids matrix. The thermogravimetric analysis (TGA) of SFAs samples showed a good thermal stability up to 200 °C, followed by a progressive weight loss, reaching a plateau at about 95% volatilization at about 470 °C. The binary blends of SFAs and microcrystalline cellulose (MCC; Avicel PH 101) in a ratio of 25:75 (w/w) displayed good powder flow and tablet compression properties. The corresponding theophylline-containing tablets showed sustained or prolonged-release characteristics. The physicochemical and bulk powder properties of SFAs isolated from OBB are auspicious in terms of potential pharmaceutical excipient applications.
Assuntos
Betula/química , Ácidos Graxos/isolamento & purificação , Lipídeos/isolamento & purificação , Lipídeos/farmacologia , Casca de Planta/química , Celulose , Química Farmacêutica , Excipientes/farmacologia , Ácidos Graxos/química , Lipídeos/química , Estrutura Molecular , Comprimidos/farmacologia , Teofilina/análiseRESUMO
OBJECTIVE: Artesunate (ART) is proven to have potential anti-proliferative activities, but its instability and poor aqueous solubility limit its application as an anti-cancer drug. The present study was undertaken to develop coaxial electrospraying as a novel technique for fabricating nanoscale drug delivery systems of ART as the core-shell nanostructures. METHODS: The core-shell nanoparticles (NPs) were fabricated with coaxial electrospraying and the formation mechanisms of NPs were examined. The physical solid state and drug-polymer interactions of NPs were characterized by X-ray powder diffraction (XRPD) and Fourier transform infrared (FTIR) spectroscopy. The effects of materials and electrospraying process on the particle size and surface morphology of NPs were investigated by scanning electron microscopy (SEM). The drug release from NPs was determined in vitro by a dialysis method. RESULTS: The ART/poly(lactic-co-glycolic) acid (PLGA) chitosan (CS) NPs exhibited the mean particle size of 303 ± 93 nm and relatively high entrapment efficiency (80.5%). The release pattern showed an initial rapid release within two hours followed by very slow extended release. The release pattern approached the Korsmeyer-Peppas model. CONCLUSIONS: The present results suggest that the core-shell NPs containing PLGA and CS have a potential as carriers in the anticancer drug therapy of ART.
Assuntos
Antineoplásicos/administração & dosagem , Artemisininas/administração & dosagem , Quitosana/química , Sistemas de Liberação de Medicamentos/métodos , Nanopartículas/química , Ácido Poliglicólico/química , Antineoplásicos/química , Artemisininas/química , Artesunato , Liberação Controlada de Fármacos , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Difração de Raios XRESUMO
Amorphous solid dispersions (SDs) open up exciting opportunities in formulating poorly water-soluble active pharmaceutical ingredients (APIs). In the present study, novel catalytic pretreated softwood cellulose (CPSC) and polyvinylpyrrolidone (PVP) were investigated as carrier polymers for preparing and stabilizing cryogenic co-ground SDs of poorly water-soluble piroxicam (PRX). CPSC was isolated from pine wood (Pinus sylvestris). Raman and Fourier transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) were used for characterizing the solid-state changes and drug-polymer interactions. High-resolution scanning electron microscope (SEM) was used to analyze the particle size and surface morphology of starting materials and final cryogenic co-ground SDs. In addition, the molecular aspects of drug-polymer interactions and stabilization mechanisms are presented. The results showed that the carrier polymer influenced both the degree of amorphization of PRX and stabilization against crystallization. The cryogenic co-ground SDs prepared from PVP showed an enhanced dissolution rate of PRX, while the corresponding SDs prepared from CPSC exhibited a clear sustained release behavior. In conclusion, cryogenic co-grinding provides a versatile method for preparing amorphous SDs of poorly water-soluble APIs. The solid-state stability and dissolution behavior of such co-ground SDs are to a great extent dependent on the carrier polymer used.
Assuntos
Química Farmacêutica/métodos , Portadores de Fármacos/química , Piroxicam/química , Polímeros/química , Água/química , Criopreservação/métodos , Portadores de Fármacos/análise , Piroxicam/análise , Polímeros/análise , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Difração de Raios X/métodosRESUMO
Uropathogenic strains of Escherichia coli (UPEC) are the major cause of bacteremic urinary tract infections. Survival in the bloodstream is associated with different mechanisms that help to resist serum complement-mediated killing. While the phenotypic heterogeneity of bacteria has been shown to influence antibiotic tolerance, the possibility that it makes cells refractory to killing by the immune system has not been experimentally tested. In the present study we sought to determine whether the heterogeneity of bacterial cultures is relevant to bacterial targeting by the serum complement system. We monitored cell divisions in the UPEC strain CFT073 with fluorescent reporter protein. Stationary-phase cells were incubated in active or heat-inactivated human serum in the presence or absence of different antibiotics (ampicillin, norfloxacin, and amikacin), and cell division and complement protein C3 binding were measured by flow cytometry and immunofluorescence microscopy. Heterogeneity in the doubling times of CFT073 cells in serum enabled three phenotypically different subpopulations to be distinguished, all of them being recognized by the C3 component of the complement system. The population of rapidly growing cells resists serum complement-mediated lysis. The dominant subpopulation of cells with intermediate growth rate is susceptible to serum. The third population, which does not resume growth upon dilution from stationary phase, is simultaneously protected from serum complement and antibiotics.
Assuntos
Antibacterianos/farmacologia , Complemento C3/farmacologia , Heterogeneidade Genética , Escherichia coli Uropatogênica/efeitos dos fármacos , Amicacina/farmacologia , Ampicilina/farmacologia , Farmacorresistência Bacteriana , Genótipo , Humanos , Testes de Sensibilidade Microbiana , Microscopia de Fluorescência , Norfloxacino/farmacologia , Fenótipo , Escherichia coli Uropatogênica/genética , Escherichia coli Uropatogênica/crescimento & desenvolvimento , Escherichia coli Uropatogênica/ultraestruturaRESUMO
We developed a reporter system based on simultaneous expression of two fluorescent proteins: GFP as a reporter of the capacity of protein synthesis and mutated mScarlet-I as a reporter of translational errors. Because of the unique stop codons or frameshift mutations introduced into the mScarlet-I gene, red fluorescence was produced only after a mistranslation event. These reporters allowed us to estimate mistranslation at a single cell level using either flow cytometry or fluorescence microscopy. We found that laboratory strains of Escherichia coli are more prone to mistranslation compared to the clinical isolates. As relevant for uropathogenic E. coli, growth in human urine elevated translational frameshifting compared to standard laboratory media, whereas different standard media had a small effect on translational fidelity. Antibiotic-induced mistranslation was studied by using amikacin (aminoglycoside family) and azithromycin (macrolide family). Bactericidal amikacin induced preferably stop-codon readthrough at a moderate level. Bacteriostatic azithromycin on the other hand induced both frameshifting and stop-codon readthrough at much higher level. Single cell analysis revealed that fluorescent reporter-protein signal can be lost due to leakage from a fraction of bacteria in the presence of antibiotics, demonstrating the complexity of the antimicrobial activity.
Assuntos
Antibacterianos , Mutação da Fase de Leitura , Humanos , Antibacterianos/farmacologia , Azitromicina/farmacologia , Amicacina , Escherichia coli/genética , Códon de Terminação/genética , Biossíntese de ProteínasRESUMO
Electrospun (ES) fibrous nanomaterials have been widely investigated as novel biomaterials. These biomaterials have to be safe and biocompatible; hence, they need to be tested for cytotoxicity before being administered to patients. The aim of this study was to develop a suitable and biorelevant in vitro cytotoxicity assay for ES biomaterials (e.g. wound dressings). We compared different in vitro cytotoxicity assays, and our model wound dressing was made from polycaprolactone and polyethylene oxide and contained chloramphenicol as the active pharmaceutical ingredient. Baby Hamster Kidney cells (BHK-21), human primary fibroblasts and MTS assays together with real-time cell analysis were selected. The extract exposure and direct contact safety evaluation setups were tested together with microscopic techniques. We found that while extract exposure assays are suitable for the initial testing, the biocompatibility of the biomaterial is revealed in in vitro direct contact assays where cell interactions with the ES wound dressing are evaluated. We observed significant differences in the experimental outcome, caused by the experimental set up modification such as cell line choice, cell medium and controls used, conducting the phosphate buffer washing step or not. A more detailed technical protocol for the in vitro cytotoxicity assessment of ES wound dressings was developed.
Assuntos
Bandagens , Materiais Biocompatíveis , Cicatrização , Animais , Cicatrização/efeitos dos fármacos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Humanos , Linhagem Celular , Teste de Materiais , Cricetinae , Poliésteres/química , Fibroblastos/efeitos dos fármacos , Anti-Infecciosos/farmacologia , Polietilenoglicóis/química , Cloranfenicol/farmacologiaRESUMO
Conventional wound infection treatments neither actively promote wound healing nor address the growing problem of antibacterial resistance. Antimicrobial peptides (AMPs) are natural defense molecules, released from host cells, which may be rapidly bactericidal, modulate host-immune responses, and/or act as endogenous mediators for wound healing. However, their routine clinical use has hitherto been hindered due to their instability in the wound environment. Here we describe an electrospun carrier system for topical application of pleurocidin, demonstrating sufficient AMP release from matrices to kill wound-associated pathogens including Acinetobacter baumannii and Pseudomonas aeruginosa. Pleurocidin can be incorporated into polyvinyl alcohol (PVA) fiber matrices, using coaxial electrospinning, without major drug loss with a peptide content of 0.7% w/w predicted sufficient to kill most wound associated species. Pleurocidin retains its activity on release from the electrospun fiber matrix and completely inhibits growth of two strains of A. baumannii (AYE; ATCC 17978) and other ESKAPE pathogens. Inhibition of P. aeruginosa strains (PAO1; NCTC 13437) is, however, matrix weight per volume dependent, with only larger/thicker matrices maintaining complete inhibition. The resulting estimation of pleurocidin release from the matrix reveals high efficiency, facilitating a greater AMP potency. Wound matrices are often applied in parallel or sequentially with the use of standard wound care with biocides, therefore the presence and effect of biocides on pleurocidin potency was tested. It was revealed that combinations displayed additive or modestly synergistic effects depending on the biocide and pathogens which should be considered during the therapy. Taken together, we show that electrospun, pleurocidin-loaded wound matrices have potential to be investigated for wound infection treatment.
Assuntos
Desinfetantes , Infecção dos Ferimentos , Humanos , Proteínas de Peixes/farmacologia , Bactérias , Antibacterianos/farmacologia , Antibacterianos/química , Desinfetantes/farmacologia , Infecção dos Ferimentos/tratamento farmacológicoRESUMO
Pineapple weed (Matricaria discoidea DC.) is a widespread plant in Europe and North America. In ethnomedicine, it is well-known for its anti-inflammatory and spasmolytic activities. The aim of this research was to develop novel methods of M. discoidea processing to obtain essential oil and dry extracts and to investigate their phytochemical compositions. Moreover, the molecular docking of the main substances and the in vivo studies on their soporific and analgesic activities were conducted. The essential oil and two dry extracts from M. discoidea were prepared. A total of 16 phenolic compounds (seven flavonoids, seven hydroxycinnamic acids, and two phenolic acids) in the dry extracts were identified by means of UPLC-MS/MS. In the essential oil, nine main terpenoids were identified by gas chromatography (GC). It was shown that phenolic extraction from the herb was successful when using 70% ethanol in a triple extraction method and at a ratio of 1:14-1:16. The in vivo studies with rodents demonstrated the analgesic activity of the M. discoidea extracts and improvements in the sleep of animals. The dry extracts of M. discoidea did not show any toxicity. The molecular docking analysis showed a high probability of COX-1,2 inhibition and NMDA receptor antagonism by the extracts.
Assuntos
Matricaria , Óleos Voláteis , Animais , Simulação de Acoplamento Molecular , Extratos Vegetais/farmacologia , Extratos Vegetais/química , Cromatografia Líquida , Espectrometria de Massas em Tandem , Analgésicos/farmacologia , Analgésicos/química , Compostos Fitoquímicos/farmacologia , Compostos Fitoquímicos/química , Óleos Voláteis/farmacologia , Etanol , Fenóis/farmacologia , Antioxidantes/químicaRESUMO
Galenic preparations of German chamomile are used to treat mild skin diseases, inflammation, and spasms, and they have also been reported to have anxiolytic and sedative effects. The medicinal use of chamomile is well known in ethnomedicine. After obtaining its galenic preparations, there is lots of waste left, so it is expedient to develop waste-free technologies. The aims of this study were to gain knowledge of the ethnomedical status of chamomile in the past and present, develop methods for preparing essential oils and dry extracts from German chamomile flowers using complex processing, reveal the phytochemical composition of such extracts, and verify the analgesic and soporific activity of the extracts. Two methods for the complex processing of German chamomile flowers were developed, which allowed us to obtain the essential oil and dry extracts of the tincture and aqueous extracts as byproducts. A total of 22 phenolic compounds (7 hydroxycinnamic acids, 13 flavonoids, and 2 phenolic acids) were found in the dry extracts by using UPLC-MS/MS. In total, nine main terpenoids were identified in the chamomile oil, which is of the bisabolol chemotype. During the production of chamomile tincture, a raw material-extractant ratio of 1:14-1:16 and triple extraction are recommended for its highest yield. In in vivo studies with mice and rats, the extracts showed analgesic activity and improvements in sleep. The highest sedative and analgesic effects in rodents were found with the dry extract prepared by using a 70% aqueous ethanol solution for extraction at a dose of 50 mg/kg. The developed methods for the complex processing of German chamomile flowers are advisable for implementation into the pharmaceutical industry to reduce the volume of waste during the production of its essential oil and tincture, and to obtain new products.
RESUMO
The shortage of face masks and the lack of antipathogenic functions has been significant since the recent pandemic's inception. Moreover, the disposal of an enormous number of contaminated face masks not only carries a significant environmental impact but also escalates the risk of cross-contamination. This study proposes a strategy to upgrade available surgical masks into antibacterial masks with enhanced particle and bacterial filtration. Plasmonic nanoparticles can provide photodynamic and photothermal functionalities for surgical masks. For this purpose, gold nanorods act as on-demand agents to eliminate pathogens on the surface of the masks upon near-infrared light irradiation. Additionally, the modified masks are furnished with polymer electrospun nanofibrous layers. These electrospun layers can enhance the particle and bacterial filtration efficiency, not at the cost of the pressure drop of the mask. Consequently, fabricating these prototype masks could be a practical approach to upgrading the available masks to alleviate the environmental toll of disposable face masks.
Assuntos
Nanofibras , Nanopartículas , Nanotubos , Máscaras , FiltraçãoRESUMO
Tablet compression of softwood cellulose and lignin prepared by a new catalytic oxidation and acid precipitation method were investigated and compared with the established pharmaceutical direct compression excipients. Catalytic pretreated softwood cellulose (CPSC) and lignin (CPSL) were isolated from pine wood (Pinus sylvestris). The compaction studies were carried out with an instrumented eccentric tablet machine. The plasticity and elasticity of the materials under compression were evaluated using force-displacement treatment and by determining characteristic plasticity (PF) and elasticity (EF) factors. With all biomaterials studied, the PF under compression decreased exponentially as the compression force increased. The compression force applied in tablet compression did not significantly affect the elasticity of CPSC and microcrystalline cellulose (MCC) while the EF values for softwood lignins increased as compression force increased. CPSL was clearly a less plastically deforming and less compactable material than the two celluloses (CPSC and MCC) and hardwood lignin. CPSL presented deformation and compaction behaviour almost identical to that of lactose monohydrate. In conclusion, the direct tablet compression behaviour of native lignins and celluloses can greatly differ from each other depending on the source and isolation method used.
Assuntos
Celulose/química , Química Farmacêutica , Excipientes/química , Lignina/química , Catálise , Microscopia Eletrônica de Varredura , Pinus/química , ComprimidosRESUMO
History has demonstrated that the uncontrolled fast thriving of potentially pathogenic microorganisms may lead to serious consequences and, thus, the approaches helping to control the microbial numbers in infectional hot-spots are necessary [...].
RESUMO
Antimicrobial peptides (AMPs) are potent, mostly cationic, and amphiphilic broad-spectrum host defense antimicrobials that are produced by all organisms ranging from prokaryotes to humans. In addition to their antimicrobial actions, they modulate inflammatory and immune responses and promote wound healing. Although they have clear benefits over traditional antibiotic drugs, their wide therapeutic utilization is compromised by concerns of toxicity, stability, and production costs. Recent advances in nanotechnology have attracted increasing interest to unleash the AMPs' immense potential as broad-spectrum antibiotics and anti-biofilm agents, against which the bacteria have less chances to develop resistance. Topical application of AMPs promotes migration of keratinocytes and fibroblasts, and contributes significantly to an accelerated wound healing process. Delivery of AMPs by employing nanotechnological approaches avoids the major disadvantages of AMPs, such as instability and toxicity, and provides a controlled delivery profile together with prolonged activity. In this review, we provide an overview of the key properties of AMPs and discuss the latest developments in topical AMP therapy using nanocarriers. We use chronic hard-to-heal wounds-complicated by infections, inflammation, and stagnated healing-as an example of an unmet medical need for which the AMPs' wide range of therapeutic actions could provide the most potential benefit. The use of innovative materials and sophisticated nanotechnological approaches offering various possibilities are discussed in more depth.
Assuntos
Anti-Infecciosos , Peptídeos Antimicrobianos , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Anti-Infecciosos/uso terapêutico , Peptídeos Catiônicos Antimicrobianos/farmacologia , Peptídeos Catiônicos Antimicrobianos/uso terapêutico , Humanos , NanotecnologiaRESUMO
Despite the advances in the field of pharmaceutical materials and technology, topical administration remains a method of choice for the treatment of eye diseases such as glaucoma, with eye drops being a leading dosage form. Their main disadvantage is a very short drug residence time and thus poor drug bioavailability, leading to the necessity of continuous repeated dosing. Mucoadhesive electrospun nanofibers are promising candidates for overcoming these challenges, while still benefiting from topical ocular administration. As an alternative for eye drops, a nanofibrous drug delivery system (DDS) for the delivery of brinzolamide (BRZ), based on ß-cyclodextrin (ß-CD), hydroxypropyl cellulose (HPC) and polycaprolactone (PCL), was designed. The results showed ß-CD/BRZ guest-host interactions, successful drug incorporation into the nanofibers, and the possibility of more accurate dosing in comparison with the control eye drops. Drug permeation through sheep corneas was almost linear in time, achieving therapeutic concentrations in the receptor medium, and mucoadhesion to sheep eye mucosa was relatively high in case of formulations with high HPC content. All formulations were biocompatible, their mechanical properties were sufficient to handle them without caution and UV irradiation was suitable to reduce bioburden of the fibers matrix, yet no antibacterial properties of BRZ were observed.