RESUMO
Substituting plastics with circular and sustainable alternatives has increasingly become a priority. Protective coatings, crucial components in numerous industries, are now in demand for biodegradable options to replace their plastic-based counterparts. Being one of nature's most abundant components, lignin remains underutilized, and this study focuses on investigating its potential for the production of biobased coatings. The method used here involved formulating coating suspensions by mixing methylcellulose and organosolv lignin powders and adding water to the mixture. Glass wafers were coated with the formulated suspensions using spin-coating. The morphology of the coated surfaces was assessed using optical and scanning electron microscopy. In addition, the wettability of the surfaces was examined through water contact angle experiments, and a numerical model was introduced to predict the water contact angle evolution over time. The results revealed that the sample coated with a 2.5 wt% lignin suspension exhibited the highest initial contact angle (114°), with a decreasing trend as the lignin fraction increases. Moreover, coatings with 3.5 wt% lignin and above exhibited lower surface coverage due to lignin particle aggregation and surface defects. By approximating the water droplet on the surface as a spherical cap, the introduced numerical model successfully predicted the time-dependent evolution of the water contact angle by showing strong alignment with experimental results. Taken altogether, we have showcased here a method for modifying coating properties-in a practical sense from water-absorbent to splash-proof-using readily available forest-based materials. This advancement is paving the way for sustainable protective packaging, aiming to replace styrofoam in the electronics and food industries.
RESUMO
BACKGROUND: To compare the diagnostic value of 120-kV with conventional 96-kV Cone-Beam CT (CBCT) of the temporal bone after cochlear implant (CI) surgery. METHODS: This retrospective study included CBCT scans after CI surgery between 06/17 and 01/18. CBCT allowed examinations with 96-kV or 120-kV; other parameters were the same. Two radiologists independently evaluated following criteria on 5-point Likert scales: osseous spiral lamina, inner and outer cochlear wall, semi-circular canals, mastoid trabecular structure, overall image quality, metal and motion artefacts, depiction of intracochlear electrode position and visualisation of single electrode contacts. Effective radiation dose was assessed. RESULTS: Seventy-five patients (females, n = 39 [52.0%], mean age, 55.8 ± 16.5 years) were scanned with 96-kV (n = 32, 42.7%) and 120-kV (n = 43, 57.3%) protocols including CI models from three vendors (vendor A n = 7; vendor B n = 43; vendor C n = 25). Overall image quality, depiction of anatomical structures, and electrode position were rated significantly better in 120-kV images compared to 96-kV (all p < = 0.018). Anatomical structures and electrode position were rated significantly better in 120-kV CBCT for CI models from vendor A and C, while 120-kV did not provide improved image quality in CI models from vendor B. Radiation doses were significantly higher for 120-kV scans compared to 96-kV (0.15 vs. 0.08 mSv, p < 0.001). CONCLUSIONS: 120-kV and 96-kV CBCT provide good diagnostic images for the postoperative CI evaluation. While 120-kV showed improved depiction of temporal bone and CI electrode position compared to 96-kV in most CI models, the 120-kV protocol should be chosen wisely due to a substantially higher radiation exposure.
Assuntos
Implantes Cocleares , Tomografia Computadorizada de Feixe Cônico , Doses de Radiação , Osso Temporal , Humanos , Tomografia Computadorizada de Feixe Cônico/métodos , Masculino , Pessoa de Meia-Idade , Feminino , Estudos Retrospectivos , Osso Temporal/diagnóstico por imagem , Idoso , Adulto , Implante Coclear/métodosRESUMO
AIM: Machine learning techniques have demonstrated success in predictive modeling across various clinical cases. However, few studies have considered predicting the use of multisectoral health and social services among older adults. This research aims to utilize machine learning models to detect high-risk groups of excessive health and social services utilization at early stage, facilitating the implementation of preventive interventions. METHODS: We used pseudonymized data covering a four-year period and including information on a total of 33,374 senior citizens from Southern Finland. The endpoint was defined based on the occurrence of unplanned healthcare visits and the total number of different services used. Input features included individual's basic demographics, health status and past usage of healthcare resources. Logistic regression and eXtreme Gradient Boosting (XGBoost) methods were used for binary classification, with the dataset split into 70% training and 30% testing sets. RESULTS: Subgroup-based results mirrored trends observed in the full cohort, with age and certain health issues, e.g. mental health, emerging as positive predictors for high service utilization. Conversely, hospital stay and urban residence were associated with decreased risk. The models achieved a classification performance (AUC) of 0.61 for the full cohort and varying in the range of 0.55-0.62 for the subgroups. CONCLUSIONS: Predictive models offer potential for predicting future high service utilization in the older adult population. Achieving high classification performance remains challenging due to diverse contributing factors. We anticipate that classification performance could be increased by including features based on additional data categories such as socio-economic data.
RESUMO
OBJECTIVES: The aim of this study was to identify cone-beam computed tomography (CBCT) protocols that offer an optimal balance between effective dose and 3D model for orthognathic virtual surgery planning, using CT as a reference, and to assess whether such protocols can be defined based on technical image quality metrics. METHODS: Eleven CBCT (VISO G7, Planmeca Oy, Helsinki, Finland) scan protocols were selected out of 32 candidate protocols, based on effective dose and technical image quality measurements. Next, an anthropomorphic RANDO SK150 phantom was scanned using these 11 CBCT protocols and 2 CT scanners for bone quantity assessments. The resulting DICOM files were converted into STL models that were used for bone volume and area measurements in the predefined orbital region to assess the validity of each CBCT protocol for VSP. RESULTS: The highest CBCT bone volume and area of the STL models were obtained using normal dose protocol (F2) and ULD protocol (J13) which resulted in 48% and 96% of the mean STL bone volume and 48% and 95% of the bone area measured on CT scanners, respectively. CONCLUSIONS: The optimal normal dose CBCT protocol" F2" offered optimal bone area and volume balance for STL. The optimal CBCT protocol can be defined exhibited similar using CNR and MTF values that were similar with of those of the reference CT scanners'. CBCT scanner with selected protocols can offer a viable alternative to CT scanners for acquiring STL models for VSP at a lower effective dose.
RESUMO
BACKGROUND: Multi slice computed tomography (MSCT) is the most common used method in middle ear imaging. However, MSCT lacks the ability to distinguish the ossicular chain microstructures in detail resulting in poorer diagnostic outcomes. Novel cone beam computed tomography (CBCT) devices' image resolution is, on the other hand, better than MSCT resolution. The aim of this study was to optimize imaging parameters of a novel full body CBCT device to obtain optimal contrast to noise ratio (CNR) with low effective dose, and to optimize its clinical usability. METHODS: Imaging of five anonymous excised human cadaver temporal bones, the acquisition of the effective doses and the CNR measurements were performed for images acquired on using Planmed XFI® full body CBCT device (Planmed Oy, Helsinki, Finland) with a voxel size of 75 µm. All images acquired from the specimens using 10 different imaging protocols varying from their tube current exposure time product (mAs) and tube voltage (kVp) were analyzed for eight anatomical landmarks and evaluated by three evaluators. RESULTS: With the exception of protocol with 90 kVp 100 mAs, all other protocols used are competent to image the finest structures. With a moderate effective dose (86.5 µSv), protocol with 90 kV 450 mAs was chosen the best protocol used in this study. A significant correlation between CNR and clinical image quality of the protocols was observed in linear regression model. Using the optimized imaging parameters, we were able to distinguish even the most delicate middle ear structures in 2D images and produce accurate 3D reconstructions. CONCLUSIONS: In this ex vivo experiment, the new Planmed XFI® full body CBCT device produced excellent 2D resolution and easily created 3D reconstructions in middle ear imaging with moderate effective doses. This device would be suitable for middle ear diagnostics and for e.g., preoperative planning. Furthermore, the results of this study can be used to optimize the effective dose by selecting appropriate exposure parameters depending on the diagnostic task.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Tomografia Computadorizada por Raios X , Humanos , Doses de Radiação , Imagens de Fantasmas , Tomografia Computadorizada de Feixe Cônico/métodos , Tomografia Computadorizada por Raios X/métodos , Orelha Média/diagnóstico por imagemRESUMO
BACKGROUND: There is a need for better adoption of technology to meet the needs of home care professionals, older people, and informal caregivers. METHODS: Mixed methods were used to describe and analyse quantitative and qualitative data in a Finnish governmental programme called KATI. The study was three-fold: it 1) listed what kinds of technologies were piloted and deployed in a national study, 2) provided information from the perspectives of home care professionals about requirements to use technology by using focus-group interviews, and 3) assessed experiences of how the adoption of technology changes work and work processes over time by using repeated surveys. Informants in interviews (n = 25) and surveys (n = 90) were home care professionals, who also described the perspectives of older people and informal caregivers. The conceptual models framing the study were adapted from the Technology Acceptance Model and DirVA PROVE-IT. RESULTS: There were 80 technology pilots, in which variety of technologies were followed in home care. Familiarity with, commitment to and understanding of technology benefits were considered to be requirements for the technology to be used. The adoption of technology provided new skills and information about older people's wellbeing, realisation of treatment and new possibilities in home care. It developed new procedures to focus on older people's needs and motivated professionals by gained concrete aid. It enabled them to leave out some concrete procedures as unnecessary. On the other hand, there were also pessimistic and negative experiences when technology use provided nothing new or did not change anything. CONCLUSIONS: The adoption of technology is dependent on the technology and its integration into the prevailing service practice. When they both work, it is possible to leave out unnecessary procedures in care, allocate resources and save time. It is possible to be aware of older people's safety and how they cope at home, find new ways to get involved in older people's lives, gain insight, and make changes at work. Continuous on-site training, modifications in service practices and communication throughout organisations is needed.
Assuntos
Serviços de Assistência Domiciliar , Humanos , Idoso , Finlândia , Cuidadores , Grupos Focais , ComunicaçãoRESUMO
BACKGROUND: Today, digitalisation is strongly present in health and social care, and it increasingly affects the organisation of work, work requirements, tasks and tools. Due to the constant change in work, up-to-date knowledge is needed about these micro-level effects of digitalisation and how professionals experience the effects in their work. Furthermore, even though managers play a key role in implementing new digital services, their perceptions of the effects of digitalisation and whether they match the views of professionals remain unknown. This study examined how health and social care professionals and managers perceive the effects of digitalisation on the work of professionals. METHODS: We used a qualitative approach and conducted eight semi-structured focus group interviews with health and social care professionals (n = 30) and 21 individual interviews with managers in 2020 in four health centres in Finland. The qualitative content analysis included both an inductive and a deductive approach. RESULTS: Digitalisation was perceived to have changed professionals' 1) workload and pace, 2) the field and nature of work, 3) work community communication and interaction, and 4) information flow and security. Both professionals and managers identified effects such as accelerated work, reduction in workload, constant learning of technical skills, complicated work due to vulnerable information systems, and reduction in face-to-face encounters. However, managers did not bring up all the effects that professionals considered important, such as the creation of new work tasks, increased and duplicated work, or insufficient time to get acquainted with the systems. CONCLUSIONS: The findings suggest that some of the effects of digitalisation on professionals' work and changes in the workplace may receive too little or no recognition from managers. This increases the risk that the potential negative effects may be overlooked and that managers will adopt systems that do not support the work of professionals. To reach a common understanding of the effects of digitalisation, continuous discussions between employees and different management levels are required. This contributes to professionals' well-being and adaptation to changes, as well as the provision of quality health and social services.
Assuntos
Apoio Social , Serviço Social , Humanos , Pesquisa Qualitativa , Grupos Focais , ComunicaçãoRESUMO
Correction for 'Chlamydomonas reinhardtii swimming in the Plateau borders of 2D foams' by Oskar Tainio et al., Soft Matter, 2021, 17, 145-152, DOI: 10.1039/D0SM01206H.
RESUMO
Unicellular Chlamydomonas reinhardtii micro-algae cells were inserted into a quasi-2D Hele-Shaw chamber filled with saponin foam. The movement of the algae along the bubble borders was then manipulated and tracked. These self-propelled particles generate flow and stresses in their surrounding matter. In addition, the algae possess the capability of exerting forces that alter bubble boundaries while maintaining an imminent phototactic movement. We find that by controlling the gas fraction of the foam we can change the interaction of the algae and bubbles. Specifically, our data expose three distinct swimming regimes for the algae with respect to the level of confinement due to the Plateau border cross-section: unlimited bulk, transition, and overdamped regimes. At the transition regime we find the speed of the algae to be modeled by a simple force balance equation emerging from the shear inside the Plateau border. Thus, we have shown that it is possible to create an algae-friendly foam while controlling the algae motion. This opens doors to multiple applications where the flow of nutrients, oxygen and recirculation of living organisms is essential.
Assuntos
Chlamydomonas reinhardtii , Movimento (Física) , Movimento , NataçãoRESUMO
BACKGROUND: Although the COVID-19 pandemic has significantly boosted the implementation of digital services worldwide, it has become increasingly important to understand how these solutions are integrated into professionals' routine work. Professionals who are using the services are key influencers in the success of implementations. To ensure successful implementations, it is important to understand the multiprofessional perspective, especially because implementations are likely to increase even more. OBJECTIVE: The aim of this study is to examine health and social care professionals' experiences of digital service implementations and to identify factors that support successful implementations and should be considered in the future to ensure that the services are integrated into professionals' routine work. METHODS: A qualitative approach was used, in which 8 focus group interviews were conducted with 30 health and social care professionals from 4 different health centers in Finland. Data were analyzed using qualitative content analysis. The resulting categories were organized under the components of normalization process theory. RESULTS: Our results suggested 14 practices that should be considered when implementing new digital services into routine work. To get professionals to understand and make sense of the new service, (1) the communication related to the implementation should be comprehensive and continuous and (2) the implementation process should be consistent. (3) A justification for the service being implemented should also be given. The best way to engage the professionals with the service is (4) to give them opportunities to influence and (5) to make sure that they have a positive attitude toward the service. To enact the new service into professionals' routine work, it is important that (6) the organization take a supportive approach by providing support from several easy and efficient sources. The professionals should also have (7) enough time to become familiar with the service, and they should have (8) enough know-how about the service. The training should be (9) targeted individually according to skills and work tasks, and (10) it should be diverse. The impact of the implementation on the professionals' work should be evaluated. The service (11) should be easy to use, and (12) usage monitoring should happen. An opportunity (13) to give feedback on the service should also be offered. Moreover, (14) the service should support professionals' work tasks. CONCLUSIONS: We introduce 14 practices for organizations and service providers on how to ensure sustainable implementation of new digital services and the smooth integration into routine work. It is important to pay more attention to comprehensive and continuing communication. Organizations should conduct a competence assessment before training in order to ensure proper alignment. Follow-ups to the implementation process should be performed to guarantee sustainability of the service. Our findings from a forerunner country of digitalization can be useful for countries that are beginning their service digitalization or further developing their digital services.
Assuntos
COVID-19 , Pandemias , Humanos , Pesquisa Qualitativa , SARS-CoV-2 , Apoio SocialRESUMO
The aim of the study was to estimate and to compare effective doses in the elbow region resulting from four different x-ray imaging modalities. Absorbed organ doses were measured using 11 metal oxide field effect transistor (MOSFET) dosimeters that were placed in a custom-made anthropomorphic elbow RANDO phantom. Examinations were performed using Shimadzu FH-21 HR radiography device, Siemens Sensation Open 24-slice MSCT-device, NewTom 5G CBCT device, and Planmed Verity CBCT device, and the effective doses were calculated according to ICRP 103 recommendations. The effective dose for the conventional radiographic device was 1.5 µSv. The effective dose for the NewTom 5G CBCT ranged between 2.0 and 6.7 µSv, for the Planmed Verity CBCT device 2.6 µSv and for the Siemens Sensation MSCT device 37.4 µSv. Compared with conventional 2D radiography, this study demonstrated a 1.4-4.6 fold increase in effective dose for CBCT and 25-fold dose for standard MSCT protocols. When compared with 3D CBCT protocols, the study showed a 6-19 fold increase in effective dose using a standard MSCT protocol. CBCT devices offer a feasible low-dose alternative for elbow 3D imaging when compared to MSCT.
Assuntos
Cotovelo , Tomografia Computadorizada de Feixe Cônico Espiral , Tomografia Computadorizada de Feixe Cônico , Humanos , Imagens de Fantasmas , Doses de Radiação , Radiografia , Dosimetria TermoluminescenteRESUMO
We study the compression of low-weight foam-formed materials made out of wood fibers. Initially the stress-strain behavior follows mean-field like response, related to the buckling of fiber segments as dictated by the random three-dimensional geometry. Our Acoustic Emission (AE) measurements correlate with the predicted number of segment bucklings for increasing strain. However, the experiments reveal a transition to collective phenomena as the strain increases sufficiently. This is also seen in the gradual failure of the theory to account for the stress-strain curves. The collective avalanches exhibit scale-free features both as regards the AE energy distribution and the AE waiting time distributions with both exponents having values close to 2. In cyclic compression tests, significant increases in the accumulated acoustic energy are found only when the compression exceeds the displacement of the previous cycle, which further confirms other sources of acoustic events than fiber bending.
RESUMO
In rheological terms, foams are time independent yield stress fluids, displaying properties of both solid and liquid materials. Here we measure the propagation of a 2D dry foam in a radially symmetric Hele-Shaw cell forcing local yielding. The yield rate is manipulated by mechanical vibration with frequencies from 0 to 150 Hz. The flow speed is then extracted from the video stream and analyzed using digital image correlation software. The data are modeled analytically by a Guzman-Arrhenius type of energy landscape where the local yielding of foam correlates with the number of oscillations, i.e. attempts to cross the energy barrier. The model is confirmed in an auxiliary experiment where the vibrated foam stays in its flowing state at the same small driving pressures, where the flow of the unvibrated foam ceases. We conclude that the yield stress behaviour of foams under an external perturbation can be summarized using a simple energy landscape model. The vibration affects the films causing the stress to occasionally and locally exceed the yield threshold. This, thus, prevents the foam from jamming as in a static configuration even when the global driving is below the yield point of the foam.
RESUMO
We investigate the coupling between the interstitial medium and granular particles by studying the hopper flow of dry and submerged systems experimentally and numerically. In accordance with earlier studies, we find that the dry hopper empties at a constant rate. However, in the submerged system we observe the surging of the flow rate. We model both systems using the discrete element method, which we couple with computational fluid dynamics in the case of a submerged hopper. We are able to match the simulations and the experiments with good accuracy by fitting the particle-particle contact friction for each system separately. Submerging the hopper changes the particle-particle contact friction from µvacuum = 0.15 to µsub = 0.13, while all the other simulation parameters remain the same.
RESUMO
We study the interaction of two collinear cracks in polymer sheets slowly growing towards each other, when submitted to uniaxial stress at a constant loading velocity. Depending on the sample's geometry-specifically, the initial distances d between the two cracks' axes and L between the cracks' tips-we observe different crack paths with, in particular, a regime where the cracks repel each other prior to being attracted. We show that the angle θ characterizing the amplitude of the repulsion-and specifically its evolution with d-depends strongly on the microscopic behavior of the material. Our results highlight the crucial role of the fracture process zone. At interaction distances larger than the process zone size, crack repulsion is controlled by the microscopic shape of the process zone tip, while at shorter distances, the overall plastic process zone screens the repulsion interaction.
RESUMO
OBJECTIVE: To evaluate the impact of tube voltage, tube current, pulse number, and magnification factor on the image quality of a novel experimental set-up and the corresponding radiation. MATERIALS AND METHODS: Six human temporal bones with cochlear implant were imaged using various tube voltages, tube currents, pulse numbers, and magnification. The effect of radiation was evaluated using a metaloxide semiconductor field-effect transistor (MOSFET) dosimeter device on an anthropomorphic RANDO RAN102 male head phantom. A copper and aluminum combination filter was used for hardware filtration. RESULTS: Overall, 900 frames, 11 mA, and 88 kV provided the best image quality. In temporal bones imaged with the optimized parameters, the cochlea, osseous spiral lamina, modiolus, stapes, round window niche, and oval window landmarks were demonstrated with anatomic structures still fully assessable in all parts and acceptable image quality. The most dominant contributor to the effective dose was bone marrow (36%-37 %) followed by brain (34%-36%), remainder tissues (12%), extra-thoracic airways (7%), and oral mucosa (5%). CONCLUSIONS: By increasing the number of frames, the image quality of the inner ear details obtained using the novel cone-beam computed tomography improved.
Assuntos
Implantes Cocleares , Tomografia Computadorizada de Feixe Cônico/métodos , Orelha Média/efeitos da radiação , Osso Temporal/diagnóstico por imagem , Cadáver , Relação Dose-Resposta à Radiação , Orelha Média/diagnóstico por imagem , Orelha Média/cirurgia , Humanos , Masculino , Osso Temporal/efeitos da radiação , Osso Temporal/cirurgiaRESUMO
The aims of this study were to characterize reinforced metal-oxide-semiconductor field-effect transistor (MOSFET) dosimeters to assess the measurement uncertainty, single exposure low-dose limit with acceptable accuracy, and the number of exposures required to attain the corresponding limit of the thermoluminescent dosimeters (TLD). The second aim was to characterize MOSFET dosimeter sensitivities for two dental photon energy ranges, dose dependency, dose rate dependency, and accumulated dose dependency. A further aim was to compare the performance of MOSFETs with those of TLDs in an anthropomorphic phantom head using a dentomaxillofacial CBCT device. The uncertainty was assessed by exposing 20 MOSFETs and a Barracuda MPD reference dosimeter. The MOSFET dosimeter sensitivities were evaluated for two photon energy ranges (50-90 kVp) using a constant dose and polymethylmethacrylate backscatter material. MOSFET and TLD comparative point-dose measurements were performed on an anthropomorphic phantom that was exposed with a clinical CBCT protocol. The MOSFET single exposure low dose limit (25% uncertainty, k = 2) was 1.69 mGy. An averaging of eight MOSFET exposures was required to attain the corresponding TLD (0.3 mGy) low-dose limit. The sensitivity was 3.09 ± 0.13 mV/mGy independently of the photon energy used. The MOSFET dosimeters did not present dose or dose rate sensitivity but, however, presented a 1% decrease of sensitivity per 1000 mV for accumulated threshold voltages between 8300 mV and 17500 mV. The point doses in an anthropomorphic phantom ranged for MOSFETs between 0.24 mGy and 2.29 mGy and for TLDs between 0.25 and 2.09 mGy, respectively. The mean difference was -8%. The MOSFET dosimeters presented statistically insignificant energy dependency. By averaging multiple exposures, the MOSFET dosimeters can achieve a TLD-comparable low-dose limit and constitute a feasible method for diagnostic dosimetry using anthropomorphic phantoms. However, for single in vivo measurements (<1.7 mGy) the sensitivity is too low.
Assuntos
Antropometria , Anormalidades Maxilofaciais/radioterapia , Imagens de Fantasmas , Fótons , Semicondutores , Dosimetria Termoluminescente/instrumentação , Dosimetria Termoluminescente/métodos , Cabeça/diagnóstico por imagem , Humanos , Doses de Radiação , Radiografia , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia de Intensidade Modulada/métodosRESUMO
RATIONALE: Despite fast advances in ambient mass spectrometry imaging (MSI), the study of neutral and nonpolar compounds directly from biological matrices remains challenging. In this contribution, we explore the feasibility of laser ablation atmospheric pressure photoionization (LAAPPI) for MSI of phytochemicals in sage (Salvia officinalis) leaves. METHODS: Sage leaves were studied by LAAPPI-time-of-flight (TOF)-MSI without any sample preparation. Leaf mass spectra were also recorded with laser ablation electrospray ionization (LAESI) mass spectrometry and the spectra were compared with those obtained by LAAPPI. RESULTS: Direct probing of the plant tissue by LAAPPI efficiently produced ions from plant metabolites, including neutral and nonpolar terpenes that do not have polar functional groups, as well as oxygenated terpene derivatives. Monoterpenes and monoterpenoids could also be studied from sage by LAESI, but only LAAPPI was able to detect larger nonpolar compounds, such as sesquiterpenes and triterpenoid derivatives, from the leaf matrix. Alternative MSI methods for nonpolar compounds, such as desorption atmospheric pressure photoionization (DAPPI), do not achieve as good spatial resolution as LAAPPI (<400 µm). CONCLUSIONS: We show that MSI with LAAPPI is a useful tool for concurrently studying the distribution of polar and nonpolar compounds, such as phytochemicals, directly from complex biological samples, and it can provide information that is not available by other, established methods.
Assuntos
Espectrometria de Massas/métodos , Imagem Molecular/métodos , Compostos Fitoquímicos/química , Folhas de Planta/química , Salvia officinalis/química , Pressão Atmosférica , Lasers , Compostos Fitoquímicos/análiseRESUMO
OBJECTIVES: To compare the cone-beam computed tomography (CBCT) image quality and effective dose between low-dose scanning and standard manufacturer-recommended protocols among different CBCT units. METHODS: Three human-equivalent phantoms were scanned using the ultra-low-dose (ULD), low dose (LD), and standard dose (STD) modes of ProMax 3D Mid (Planmeca Oy, Helsinki, Finland) and Orthophos SL (Sirona, Bensheim, German) for the CBCT images. The quality of the dental anatomical images was assessed by four experienced oral and maxillofacial radiologists using a 5-point Likert scale. OnDemand3D (Cybermed Co., Seoul, Korea) was used as the third-party software for viewing. The percentage of absolute agreement was calculated to determine intra- and interrater agreements among the observers. The effective doses for all CBCT scanning protocols were also calculated. RESULTS: The STD protocol yielded a higher image quality than did the ULD and LD protocols in both ProMax 3D Mid and Orthophos SL. The ULD and LD protocols demonstrated an "acceptable-to-good" sense of visual perception of the CBCT images. The visibility scores significantly differed between the ULD and LD and the STD protocols in ProMax 3D Mid and Orthophos SL, except for the 120-kVp setting in ProMax 3D Mid. The average intra- and interrater agreement scores ranged from 0.63 to 0.89 and from 0.44 to 0.76, respectively. The ULD and LD protocols reduced the radiation dose sixfold compared with the STD protocol. CONCLUSIONS: High-tube-voltage protocols could remarkably reduce the imaging dose without degrading the image quality. Specifically, ULD and LD CBCT protocols may be adopted as routine practice for diagnosis and treatment planning.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Humanos , Tomografia Computadorizada de Feixe Cônico/instrumentação , Tomografia Computadorizada de Feixe Cônico/métodos , Processamento de Imagem Assistida por Computador , Imageamento Tridimensional , Imagens de Fantasmas , Doses de RadiaçãoRESUMO
The electrode-generated intracochlear electrical field (EF) spreads widely along the scala tympani surrounded by poorly-conducting tissue and it can be measured with monopolar transimpedance matrix (TIMmp). Bipolar TIM (TIMbp) allows estimations of local potential differences. With TIMmp, the correct alignment of the electrode array can be assessed, and TIMbp may be useful in more subtle evaluations of the electrode array's intracochlear location. In this temporal bone study, we investigated the effect of the cross-sectional scala area (SA) and the electrode-medial-wall distance (EMWD) on both TIMmp and TIMbp using three types of electrode arrays. Also, multiple linear regressions based on the TIMmp and TIMbp measurements were used to estimate the SA and EMWD. Six cadaver temporal bones were consecutively implanted with a lateral-wall electrode array (Slim Straight) and with two different precurved perimodiolar electrode arrays (Contour Advance and Slim Modiolar) for variation in EMWD. The bones were imaged with cone-beam computed tomography with simultaneous TIMmp and TIMbp measurements. The results from imaging and EF measurements were compared. SA increased from apical to basal direction (r = 0.96, p < 0.001). Intracochlear EF peak negatively correlated with SA (r = -0.55, p < 0.001) irrespective of the EMWD. The rate of the EF decay did not correlate with SA but it was faster in the proximity of the medial wall than in more lateral positions (r = 0.35, p < 0.001). For a linear comparison between the EF decaying proportionally to squared distance and anatomic dimensions, a square root of inverse TIMbp was applied and found to be affected by both SA and EMWD (r = 0.44 and r = 0.49, p < 0.001 for both). A regression model confirmed that together TIMmp and TIMbp can be used to estimate both SA and EMWD (R2 = 0.47 and R2 = 0.44, respectively, p < 0.001 for both). In TIMmp, EF peaks grow from basal to apical direction and EF decay is steeper in the proximity of the medial wall than in more lateral positions. Local potentials measured via TIMbp correlate with both SA and EMWD. Altogether, TIMmp and TIMbp can be used to assess the intracochlear and intrascalar position of the electrode array, and they may reduce the need for intra- and postoperative imaging in the future.