1α,25-Dihydroxyvitamin D3 Encapsulated in Nanoparticles Prevents Venous Neointimal Hyperplasia and Stenosis in Porcine Arteriovenous Fistulas.

BACKGROUND: Few therapies prevent venous neointimal hyperplasia (VNH) and venous stenosis (VS) formation in arteriovenous fistulas (AVF). Expression of the immediate early response gene X-1 (Iex-1), also known as Ier3, is associated with VNH and stenosis in murine AVFs. The study aimed to determine if local release of Ier3 long-acting inhibitor 1α,25(OH)2D3 from poly(lactic-co-glycolic acid) (PLGA) nanoparticles embedded in a thermosensitive Pluronic F127 hydrogel (1,25 NP) could affect VNH/VS formation in a large animal model. METHODS: Immediately after AVF creation in a porcine model of renal failure, 1,25 NP or vehicle control was injected into the adventitia space of AVF outflow veins. Scanning electron microscopy and dynamic light scattering characterized drug and control nanoparticles. Animals were sacrificed 3 and 28 days later for gene expression, immunohistologic, magnetic resonance imaging and angiography, and ultrasound analyses. Whole transcriptome RNA sequencing with differential gene expression analysis was performed on outflow veins of AVF. RESULTS: Encapsulation of 1α,25(OH)2D3 in PLGA nanoparticles formed nanoparticles of uniform size that were similar to nanoparticles without 1α,25(OH)2D3. The 1,25 NP-treated AVFs exhibited lower VNH/VS, Ier3 gene expression, and IER-3, MCP-1, CD68, HIF-1α, and VEGF-A immunostaining, fibrosis, and proliferation. Blood flow and lumen area increased significantly, whereas peak systolic velocity and wall shear stress decreased. Treatment increased Young's modulus and correlated with histologic assessment of fibrosis and with no evidence of vascular calcification. RNA sequencing analysis showed changes in the expression of genes associated with inflammatory, TGFß1, and apoptotic pathways. CONCLUSIONS: Local release of 1,25 NP improves AVF flow and hemodynamics, and reduces stenosis in association with reduction in inflammation, apoptosis, and fibrosis in a porcine model of arteriovenous fistula.

Upregulation of bone cell differentiation through immobilization within a synthetic extracellular matrix.

There is a need for new therapeutic strategies to treat bone defects caused by trauma, disease or tissue loss. Injectable systems for cell transplantation have the advantage of allowing the use of minimally invasive surgical procedures, and thus for less discomfort to patients. In the present study, it is hypothesized that Arg-Gly-Asp (RGD)-coupled in a binary (low and high molecular weight) injectable alginate composition is able to influence bone cell differentiation in a three-dimensional (3D) structure. Viability, metabolic activity, cytoskeleton organization, ultrastructure and differentiation (alkaline phosphatase (ALP), von Kossa, alizarin red stainings and osteocalcin quantification) of immobilized cells were assessed. Cells within RGD-modified alginate microspheres were able to establish more interactions with the synthetic extracellular matrix as visualized by confocal laser scanning microscope and transmission electron microscopy imaging, and presented a much higher level of differentiation (more intense ALP and mineralization stainings and higher levels of osteocalcin secretion) when compared to cells immobilized within unmodified alginate microspheres. These findings demonstrate that peptides covalently coupled to alginate were efficient in influencing cell behavior within this 3D system, and may provide adequate preparation of osteoblasts for cell transplantation.

Regulating myoblast phenotype through controlled gel stiffness and degradation.

Mechanical stiffness and degradability are important material parameters in tissue engineering. The aim of this study was to address the hypothesis that these variables regulate the function of myoblasts cultured in 2-D and 3-D microenvironments. Development of cell-interactive alginate gels with tunable degradation rates and mechanical stiffness was established by a combination of partial oxidation and bimodal molecular weight distribution. Higher gel mechanical properties (13 to 45 kPa) increased myoblast adhesion, proliferation, and differentiation in a 2-D cell culture model. Primary mouse myoblasts were more highly responsive to this cue than the C2C12 myoblast cell line. Myoblasts were then encapsulated in gels varying in degradation rate to simultaneously investigate the effect of degradation and subsequent reduction of mechanical properties on cells in a 3-D environment. C2C12 cells in more rapidly degrading gels exhibited lower proliferation, as they exited the cell cycle to differentiate, compared to those in nondegradable gels. In contrast, mouse primary myoblasts illustrated significantly higher proliferation in degradable gels than in nondegradable gels, and exhibited minimal differentiation in either type of gel. Altogether, these studies suggest that a critical balance between material degradation rate and mechanical properties may be required to regulate formation of engineered skeletal muscle tissue, and that results obtained with the C2C12 cell line may not be predictive of the response of primary myoblasts to environmental cues. The principles delineated in these studies may be useful to tailor smart biomaterials that can be applied to many other polymeric systems and tissue types.

Quantitative assessment of scaffold and growth factor-mediated repair of critically sized bone defects.

An 8-mm rat segmental defect model was used to evaluate quantitatively the ability of longitudinally oriented poly(L-lactide-co-D,L-lactide) scaffolds with or without growth factors to promote bone healing. BMP-2 and TGF-beta3, combined with RGD-alginate hydrogel, were co-delivered to femoral defects within the polymer scaffolds at a dose previously shown to synergistically induce ectopic mineralization. A novel modular composite implant design was used to achieve reproducible stable fixation, provide a window for longitudinal in vivo micro-CT monitoring of 3D bone ingrowth, and allow torsional biomechanical testing of functional integration. Sequential micro-CT analysis showed that bone ingrowth increased significantly between 4 and 16 weeks for the scaffold-treated defects with or without growth factors, but no increase with time was observed in empty defect controls. Treatment with scaffold alone improved defect stability at 16 weeks compared to nontreatment, but did not achieve bone union or restoration of mechanical function. Augmentation of scaffolds with BMP-2 and TGF-beta3 significantly increased bone formation at both 4 and 16 weeks compared to nontreatment, but only produced bone bridging of the defect region in two of six cases. Histological evaluation indicated that bone formed first at the periphery of the scaffolds, followed by more limited mineral deposition within the scaffold interior, suggesting that the cells participating in the initial healing response were primarily derived from periosteum. This study introduces a challenging segmental defect model that facilitates quantitative evaluation of strategies to repair critically sized bone defects. Healing of the defect region was improved by implanting structural polymeric scaffolds infused with growth factors incorporated within RGD-alginate. However, functional integration of the constructs appeared limited by continued presence of slow-degrading scaffolds and suboptimal dose or delivery of osteoinductive signals.

Multi-scale modeling to predict ligand presentation within RGD nanopatterned hydrogels.

The adhesion ligand RGD has been coupled to various materials to be used as tissue culture matrices or cell transplantation vehicles, and recent studies indicate that nanopatterning RGD into high-density islands alters cell adhesion, proliferation, and differentiation. However, elucidating the impact of nanopattern parameters on cellular responses has been stymied by a lack of understanding of the actual ligand presentation within these systems. We have developed a multi-scale predictive modeling approach to characterize the adhesion ligand nanopatterns within an alginate hydrogel matrix. The models predict the distribution of ligand islands, the spacing between ligands within an island and the fraction of ligands accessible for cell binding. These model predictions can be used to select pattern parameter ranges for experiments on the effects of individual parameters on cellular responses. Additionally, our technique could also be applied to other polymer systems presenting peptides or other signaling molecules.

Controlling alginate gel degradation utilizing partial oxidation and bimodal molecular weight distribution.

Degradability is often a critical property of materials utilized in tissue engineering. Although alginate, a naturally derived polysaccharide, is an attractive material due to its biocompatibility and ability to form hydrogels, its slow and uncontrollable degradation can be an undesirable feature. In this study, we characterized gels formed using a combination of partial oxidation of polymer chains and a bimodal molecular weight distribution of polymer. Specifically, alginates were partially oxidized to a theoretical extent of 1% with sodium periodate, which created acetal groups susceptible to hydrolysis. The ratio of low MW to high MW alginates used to form gels was also varied, while maintaining the gel forming ability of the polymer. The rate of degradation was found to be controlled by both the oxidation and the ratio of high to low MW alginates, as monitored by the reduction of mechanical properties and corresponding number of crosslinks, dry weight loss, and molecular weight decrease. It was subsequently examined whether these modifications would lead to reduced biocompatibility by culturing C2C12 myoblast on these gels. Myoblasts adhered, proliferated, and differentiated on the modified gels at a comparable rate as those cultured on the unmodified gels. Altogether, this data indicates these hydrogels exhibit tunable degradation rates and provide a powerful material system for tissue engineering.

Hydrogels for in vivo-like three-dimensional cellular studies.

Extensive efforts have been made to understand the effects of extracellular microenvironments on phenotypic activities for a wide array of stem, progenitor, and precursor cells. Hydrogels have emerged as invaluable platforms for examining the effects of extracellular matrix (ECM) properties on cell activities because of their several advantageous features. Specifically, hydrogels are unique materials that enable cell studies in three-dimensional (3D) environments, similar to in vivo environments. Recently, there have been increasing efforts to assemble cell-encapsulating hydrogels; however, hydrogel design strategies for 3D cell cultures have not been systematically discussed to date. Therefore, this review article summarizes current hydrogel designs for 3D cell culture studies and further discusses current challenges and potential resolutions for enhancing the controllability of hydrogel properties and microstructures. The hydrogels discussed herein include those of natural polymers (e.g., collagen, fibrinogen, alginate, and hyaluronic acids), synthetic polymers [e.g., poly(ethylene glycol) (PEG) and its derivatives], and mixtures of natural and synthetic polymers. We envision that hydrogels that enable 3D studies will greatly assist in the understanding of emergent cell behaviors, and ultimately become important biomedical tools for enhancing the quality of in vitro drug screening and clinical treatments.

Three dimensionally flocculated proangiogenic microgels for neovascularization.

Microparticles encapsulating regenerative medicines have been used in tissue engineering because of their several advantages, including non-invasive drug delivery and controllable drug release rates. However, microparticles implanted in tissue defects are readily displaced by external mechanical forces, decreasing their regenerative efficacy. We hypothesized that a drug-encapsulated colloidal gel formed through colloidal attraction between microparticles would resist displacement at an implant site, and subsequently improve therapeutic efficacy. This hypothesis was examined using a colloidal gel formed from the mixing of negatively charged microgels composed of poly(ethylene glycol) (PEG) and poly(sodium acrylate), and positively charged microgels composed of PEG and poly(vinyl benzyl trimethyl ammonium chloride). The structural strength of the colloidal gel could be tuned with the zeta potential and volumetric ratios of the oppositely charged microgels. Furthermore, the implantation of the colloidal gel, encapsulating vascular endothelial growth factor, significantly increased the vascular density while limiting host inflammation, as compared with the implantation of unary microgel suspensions. This study demonstrates an enhancement in the efficacy of microparticle drug delivery systems by tuning rheological properties of suspensions, which should be useful for the design of a wide array of particulate systems for both tissue engineering and drug delivery.

Bioactive cell-hydrogel microcapsules for cell-based drug delivery.

Improvement of long-term drug release and design of mechanically more stable encapsulation devices are still major challenges in the field of cell encapsulation. This may be in part due to the weak in vivo stability of calcium-alginate beads and to the use of inactive biomaterials and inert scaffolds that do not mimic the physiological situation of the normal cell milieu. We hypothesized that designing biomimetic cell-hydrogel capsules might promote the in vivo long-term functionality of the enclosed drug-secreting cells and improve the mechanical stability of the capsules. Biomimetic capsules were fabricated by coupling the adhesion peptide arginine glycine aspartic acid (RGD) to alginate polymer chains and by using an alginate-mixture providing a bimodal molecular weight distribution. The biomimetic capsules provide cell adhesion for the enclosed cells, potentially also leading to mechanical stabilization of the cell-polymer system. Strikingly, the novel cell-hydrogel system significantly prolonged the in vivo long-term functionality and drug release, providing a sustained erythropoietin delivery during 300 days without immunosuppressive protocols. Additionally, controlling the cell-dose within the biomimetic capsules enables a controlled in vitro and in vivo drug delivery. Biomimetic cell-hydrogel capsules provide a unique microenvironment for the in vivo long-term de novo delivery of drugs from immobilized cells.

Quantifying the relation between bond number and myoblast proliferation.

Many functions of the extracellular matrix can be mimicked by small peptide fragments (e.g., arginine-glycine-aspartic acid (RGD) sequence) of the entire molecule, but the presentation of the peptides is critical to their effects on cells. It is likely that some effects of peptide presentation from biomaterials simply relate to the number of bonds formed between cell receptors and the adhesion ligands, but a lack of tools to quantify bond number limits direct investigation of this assumption. The impact of different ligand presentations (density, affinity, and nanoscale distribution) on the proliferation of C2C12 and human primary myoblasts was first examined in this study. Increasing the ligand density or binding affinity led to a similar enhancement in proliferation of C2C12 cells and human primary myoblasts. The nanoscale distribution of clustered RGD ligands also influenced C2C12 cells and human primary myoblast proliferation, but in an opposing manner. A theological technique and a FRET technique were then utilized to quantify the number of receptor-ligand interactions as a function of peptide presentation. Higher numbers of bonds were formed when the RGD density and affinity were increased, as measured with both techniques, and bond number correlated with cell growth rates. However, the influence of the nanoscale peptide distribution did not appear to be solely a function of bond number. Altogether, these findings provide significant insight to the role of peptide presentation in the regulation of cell proliferation, and the approaches developed in this work may have significant utility in probing how adhesion regulates a variety of other cellular functions and aid in developing design criterion for cell-interactive materials.

AFM imaging of RGD presenting synthetic extracellular matrix using gold nanoparticles.

Several high-resolution imaging techniques such as FESEM, TEM and AFM are compared with respect to their application on alginate hydrogels, a widely used polysaccharide biomaterial. A new AFM method applicable to RGD peptides covalently conjugated to alginate hydrogels is described. High-resolution images of RGD adhesion ligand distribution were obtained by labeling biotinylated RGD peptides with streptavidin-labeled gold nanoparticles. This method may broadly provide a useful tool for sECM characterization and design for tissue regeneration strategies.

Differentiation stage alters matrix control of stem cells.

Cues from the material to which a cell is adherent (e.g., adhesion ligand presentation, substrate elastic modulus) clearly influence the phenotype of differentiated cells. However, it is currently unclear if stem cells respond similarly to these cues. This study examined how the overall density and nanoscale organization of a model cell adhesion ligand (arginine-glycine-aspartic acid [RGD] containing peptide) presented from hydrogels of varying stiffness regulated the proliferation of a clonally derived stem cell line (D1 cells) and preosteoblasts (MC3T3-E1). While the growth rate of MC3T3-E1 preosteoblasts was responsive to nanoscale RGD ligand organization and substrate stiffness, the D1 stem cells were less sensitive to these cues in their uncommitted state. However, once the D1 cells were differentiated towards the osteoblast lineage, they became more responsive to these signals. These results demonstrate that the cell response to material cues is dependent on the stage of cell commitment or differentiation, and these findings will likely impact the design of biomaterials for tissue regeneration.

Modifying the proliferative state of target cells to control DNA expression and identifying cell types transfected in vivo.

Although the majority of current gene transfer techniques have focused on increasing the ability of the DNA to enter the cell, it is possible that changing the proliferative and migratory state of cells will influence the cells ability to take up and express plasmid DNA. This study was designed to test the hypothesis that growth factors (basic fibroblast growth factor (bFGF) and hepatocyte growth factor/scatter factor (HGF/SF)) used to alter the proliferative and migratory state of cells can alter plasmid DNA uptake and expression. In vitro studies indicate that enhancing cell proliferation with growth factor exposure enhances plasmid DNA uptake and expression. Furthermore, dual localized delivery of bFGF and plasmid DNA in vivo increases the expression, 3-6 times over control, as compared to plasmid delivery alone. Dual delivery of a factor promoting cell proliferation and a plasmid led to a further increase in the expression of the plasmid encoding bone morphogenetic protein-2 in a rat cranial defect by specific cell populations. The results of these studies suggest that increasing the proliferative state of target cell populations can enhance non-viral gene transfer.