Stepwise Functionalization of Single-Walled Carbon Nanotubes with Subsequent Molecular Conversion to Control Photoluminescence Properties.

Functionalization of single-walled carbon nanotubes (SWCNTs) has attracted interest because it alters the near-infrared (NIR) photoluminescence (PL) wavelength and emission efficiency. These modifications depend on the binding configuration and degree of functionalization. Excessive functionalization reduces the emission efficiency as the integrity of the conjugated π system decreases; thus, controlling the degree of functionalization is essential. Because the binding configurations and degree of functionalization are affected by the reagent structure, a stepwise approach combining SWCNTs functionalization and subsequent reactions to introduce functional groups into the addenda could effectively control their PL properties and functionalities. We studied this approach by implementing the reductive alkylation of SWCNTs by using bromoalkanes with t-butyl carbamate (Boc)-protected amino groups and subsequent deprotection and amidation reactions. The reaction products were analyzed based on absorption, PL, and Raman spectroscopy and the Kaiser test. Depending on the structure of the reagent, deprotection and amidation reactions competed with the elimination reaction of addenda, altering the PL properties of the SWCNTs. Furthermore, the elimination reaction was inhibited in the adducts functionalized using dibromoalkane with Boc-protected amino groups, demonstrating that the use of appropriate reagents enables the molecular conversion of the functional groups of SWCNT adducts without affecting their PL properties.

Photoluminescence Properties of Single-Walled Carbon Nanotubes Influenced by the Tether Length of Reagents with Two Reactive Sites.

The functionalization of single-walled carbon nanotubes (SWNTs) is an effective method for controlling a local band gap, resulting in photoluminescence (PL) in the near-infrared region. Herein, SWNTs were functionalized using a series of bromoalkanes and dibromoalkanes to evaluate the effects of their length on the nanotube PL properties. When bromoalkanes (Cn H2n+1 Br) or dibromoalkanes (Cn H2n Br2 ) with tether lengths of six or more were utilized for six different semiconducting SWNTs, the obtained SWNT adducts exhibited two new PL peaks, whereas dibromoalkanes with tether lengths of 3-5 (Cn H2n Br2 : n=3-5) produced single peaks. Combined with theoretical calculations, the results suggested that the tether length of reagents changes the formation mechanism of functionalized adducts, that is, Cn H2n Br2 (n=3-5) tends to result in kinetic products.

Chaperone complex formation of the transcription factor MalR involved in maltose utilization and amylolytic enzyme production in Aspergillus oryzae.

The Zn2Cys6-type transcription factor MalR controls the expression of maltose-utilizing (MAL) cluster genes and the production of amylolytic enzymes in Aspergillus oryzae. In the present study, we demonstrated that MalR formed a complex with Hsp70 and Hsp90 chaperones under non-inducing conditions similar to the yeast counterpart Mal63 and that the complex was released from the chaperone complex after the addition of the inducer maltose. The MalR protein was constitutively localized in the nucleus and mutation in both the putative nuclear localization signals (NLSs) located in the zinc finger motif and the C-terminal region resulted in the loss of nuclear localization. This result indicated the involvement of NSLs in the MalR nuclear localization. However, mutation in both NLSs did not affect the dissociation mode of the MalR-Hsp70/Hsp90 complex, suggesting that MalR activation induced by maltose can occur regardless of its intracellular localization.

DPP-4 inhibition protects human umbilical vein endothelial cells from hypoxia-induced vascular barrier impairment.

Dipeptidyl peptidase-4 (DPP-4) inhibitors are relatively new class of anti-diabetic drugs. Some protective effects of DPP-4 on cardiovascular disease have been described independently from glucose-lowering effect. However, the detailed mechanisms by which DPP-4 inhibitors exert on endothelial cells remain elusive. The purpose of this research was to determine the effects of DPP-4 inhibitor on endothelial barrier function. Human umbilical vein endothelial cells (HUVECs) were cultured and exposed to hypoxia in the presence or absence of Diprotin A, a DPP-4 inhibitor. Immunocytochemistry of vascular endothelial (VE-) cadherin showed that jagged VE-cadherin staining pattern induced by hypoxia was restored by treatment with Diprotin A. The increased level of cleaved ß-catenin in response to hypoxia was significantly attenuated by Diprotin A, suggesting that DPP-4 inhibition protects endothelial adherens junctions from hypoxia. Subsequently, we found that Diprotin A inhibited hypoxia-induced translocation of NF-κB from cytoplasm to nucleus through decreasing TNF-α expression level. Furthermore, the tube formation assay showed that Diprotin A significantly restored hypoxia-induced decrease in number of tubes by HUVECs. These results suggest that DPP-4 inhibitior protects HUVECs from hypoxia-induced barrier impairment.

Distinct mechanism of activation of two transcription factors, AmyR and MalR, involved in amylolytic enzyme production in Aspergillus oryzae.

The production of amylolytic enzymes in Aspergillus oryzae is induced in the presence of starch or maltose, and two Zn2Cys6-type transcription factors, AmyR and MalR, are involved in this regulation. AmyR directly regulates the expression of amylase genes, and MalR controls the expression of maltose-utilizing (MAL) cluster genes. Deletion of malR gene resulted in poor growth on starch medium and reduction in α-amylase production level. To elucidate the activation mechanisms of these two transcription factors in amylase production, the expression profiles of amylases and MAL cluster genes under carbon catabolite derepression condition and subcellular localization of these transcription factors fused with a green fluorescent protein (GFP) were examined. Glucose, maltose, and isomaltose induced the expression of amylase genes, and GFP-AmyR was translocated from the cytoplasm to nucleus after the addition of these sugars. Rapid induction of amylase gene expression and nuclear localization of GFP-AmyR by isomaltose suggested that this sugar was the strongest inducer for AmyR activation. In contrast, GFP-MalR was constitutively localized in the nucleus and the expression of MAL cluster genes was induced by maltose, but not by glucose or isomaltose. In the presence of maltose, the expression of amylase genes was preceded by MAL cluster gene expression. Furthermore, deletion of the malR gene resulted in a significant decrease in the α-amylase activity induced by maltose, but had apparently no effect on the expression of α-amylase genes in the presence of isomaltose. These results suggested that activation of AmyR and MalR is regulated in a different manner, and the preceding activation of MalR is essential for the utilization of maltose as an inducer for AmyR activation.

Selective emergence of photoluminescence at telecommunication wavelengths from cyclic perfluoroalkylated carbon nanotubes.

Chemical functionalisation of semiconducting single-walled carbon nanotubes (SWNTs) can tune their local band gaps to induce near-infrared (NIR) photoluminescence (PL). However, tuning the PL to telecommunication wavelengths (>1300 nm) remains challenging. The selective emergence of NIR PL at the longest emission wavelength of 1320 nm was successfully achieved in (6,5) SWNTs via cyclic perfluoroalkylation. Chiral separation of the functionalised SWNTs showed that this functionalisation was also effective in SWNTs with five different chiral angles. The local band gap modulation mechanism was also studied using density functional theory calculations, which suggested the effects of the addenda and addition positions on the emergence of the longest-wavelength PL. These findings increase our understanding of the functionalised SWNT structure and methods for controlling the local band gap, which will contribute to the development and application of NIR light-emitting materials with widely extended emission and excitation wavelengths.

Sonochemical reaction to control the near-infrared photoluminescence properties of single-walled carbon nanotubes.

The effect of ultrasonic irradiation on the optical properties of single-walled carbon nanotubes (SWNTs) was investigated. Upon sonication in D2O in the presence of sodium dodecylbenzene sulfonate (SDBS) under air, red-shifted photoluminescence (PL) peaks at ∼1043 and ∼1118 nm were observed from the aqueous suspensions of (6,4) and (6,5)SWNTs, accompanied by a decrease in the intensity of the intrinsic PL peaks. Upon sonication with SDBS under an Ar atmosphere, the rate of spectral change increased with the sonication time and new PL peaks emerged at 1043, 1118, and 1221 nm. Meanwhile, upon the addition of 1-butanol, the PL peaks emerged only at 1043 nm and 1118 nm, while the emergence of the peak at 1221 nm was inhibited. On the other hand, a suspension with highly dispersed SWNTs was obtained upon sonication in the presence of sodium cholate without any change in the intrinsic optical properties of SWNTs. These experimental results reveal that the PL characteristics of SWNTs can be controlled by controlling the sonication conditions such as the type of surfactant used, the concentration of SWNTs, reaction environment, and the presence of an inhibitor such as 1-butanol.

Influence of local strain caused by cycloaddition on the band gap control of functionalized single-walled carbon nanotubes.

Fine control of the band gap of single-walled carbon nanotubes (SWNTs) has been achieved by the functionalization with dibromoalkanes, namely, 1,3-dibromopropane (1a), 1,4-dibromobutane (1b), 1,5-dibromopentane (1c), and 1,8-bis(bromomethyl)naphthalene (1d). Red-shifted photoluminescence (PL) peaks observed at 1215-1242 nm were assigned to the local band gaps of the chemically functionalized SWNTs 2a, 2b, 2c, and 2d, respectively. Density functional theory (DFT) and time-dependent DFT calculations for 2a-2d suggest that "local strain" induced by cycloaddition plays an important role in tuning the local band gap energies of functionalized SWNTs.

Control of near infrared photoluminescence properties of single-walled carbon nanotubes by functionalization with dendrons.

Single-walled carbon nanotubes (SWNTs) were functionalized by reacting them with sodium naphthalenide and dendrons to control their photoemission in the near-IR region. The functionalized SWNTs were characterized by absorption, Raman, and photoluminescence (PL) spectroscopy. The degree of functionalization of the SWNTs decreased with the increasing bulkiness of the dendrons used. After functionalization, new red-shifted PL peaks could be observed at ∼1110 and ∼1210 nm where the intensities were drastically enhanced by the thermal treatment. The relative peak intensity of to that of increased with the increasing bulkiness of the dendrons. Density functional theory (DFT) calculations of the functionalized SWNTs with dendrons suggest that the adducts with less bulky hydroalkylated substitution are stable in Clar structures and the addition positions predominantly determine the PL peak positions.