Unveiling a Family of Dimerized Quantum Magnets, Conventional Antiferromagnets, and Nonmagnets in Ternary Metal Borides.

Dimerized quantum magnets are exotic crystalline materials where Bose-Einstein condensation of magnetic excitations can happen. However, known dimerized quantum magnets are limited to only a few oxides and halides. Here, we unveil 9 dimerized quantum magnets and 11 conventional antiferromagnets in ternary metal borides MTB4 (M = Sc, Y, La, Ce, Lu, Mg, Ca, and Al; T = V, Cr, Mn, Fe, Co, and Ni), where T atoms are arranged in structural dimers. Quantum magnetism in these compounds is dominated by strong antiferromagnetic (AFM) interactions between Cr (Cr and Mn for M = Mg and Ca) atoms within the dimers, with much weaker interactions between the dimers. These systems are proposed to be close to a quantum critical point between a disordered singlet spin-dimer phase, with a spin gap, and the ordered conventional Néel AFM phase. They greatly enrich the materials inventory that allows investigations of the spin-gap phase. Conventional antiferromagnetism in these compounds is dominated by ferromagnetic Mn (Fe for M = Mg and Ca) interactions within the dimers. The predicted stable and nonmagnetic (NM) YFeB4 phase is synthesized and characterized, providing a scarce candidate to study Fe dimers and Fe ladders in borides. The identified quantum, conventional, and NM systems provide a platform with abundant possibilities to tune the magnetic exchange coupling by doping and study the unconventional quantum phase transition and conventional magnetic transitions. This work opens new avenues for studying novel magnetism in borides arising from spin dimers and establishes a theoretical workflow for future searches for dimerized quantum magnets in other families of materials.

A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric ß-Ag2Se.

The low-temperature modification of ß-Ag2Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent ß-Ag2Se structure, aiming at tuning the material's charge and heat transport properties to enhance thermoelectric performance. The transformation of ß-Ag2Se into α-Ag2Se at ∼134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped ß-Ag2Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ∼1.15 in the 25-120 °C range for 0.2 at. % Zn-doped Ag2Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. The simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag2Se-based thermoelectric materials.

Cause, Consequence, and Control of Ag Vacancies in BaAg2-xAs2.

The impact of transition metal (Ag) deficiencies on the structural and transport properties of ThCr2Si2-type arsenides are investigated. We experimentally confirm a partial occupancy of Ag in BaAg2-xAs2, which can be predictably controlled within 0.053(5) ≤ x ≤ 0.19(1) by varying the quenching temperature during the crystal growth. Density functional theory calculations reveal that substoichiometric concentrations of Ag lower the density of states at the Fermi level, providing an electronic cause for the tendency of Ag to form vacancies. This vacancy concentration is linked to a characteristic kink in electrical resistivity that can be substantially shifted from 22 to 125 K and is established as the metric of a low-temperature structural phase transition (SPT) in BaAg2-xAs2. Along with electrical resistivity, the Seebeck coefficient and heat capacity for selected BaAg2-xAs2 samples are presented, which also exhibit anomalies due to the SPT.

Inducing Ferrimagnetic Exchange in 1D-FeSe2 Chains Using Heteroleptic Amine Complexes: [Fe(en)(tren)][FeSe2]2.

[Fe(en)(tren)][FeSe2]2 (en = ethylenediamine, C2H8N2, tren = tris(2-aminoethyl)amine, C6H18N4) has been synthesized by a mixed-ligand solvothermal method. Its crystal structure contains heteroleptic [Fe(en)(tren)]2+ complexes with distorted octahedral coordination, incorporated between 1D-FeSe2 chains composed of edge-sharing FeSe4 tetrahedra. The twisted octahedral coordination environment of the Fe-amine complex leads to partial dimerization of Fe-Fe distances in the FeSe2 chains so that the FeSe4 polyhedra deviate strongly from the regular tetrahedral geometry. 57Fe Mössbauer spectroscopy reveals oxidation states of +3 for the Fechain atoms and +2 for the Fecomplex atoms. The close proximity of Fe atoms in the chains promotes ferromagnetic nearest neighbor interactions, as indicated by a positive Weiss constant, θ = +53.8(6) K, derived from the Curie-Weiss fitting. Magnetometry and heat capacity reveal two consecutive magnetic transitions below 10 K. DFT calculations suggest that the ordering observed at 4 K is due to antiferromagnetic intrachain interactions in the 1D-FeSe2 chains. The combination of two different ligands creates an asymmetric coordination environment that induces changes in the structure of the Fe-Se fragments. This synthetic strategy opens new ways to explore the effects of ligand field strength on the structure of both Fe-amine complexes and surrounding Fe-Se chains.

New Trick for an Old Dog: From Prediction to Properties of "Hidden Clathrates" Ba2Zn5As6 and Ba2Zn5Sb6.

The zinc-antimony phase space has been heavily investigated due to the structural complexity and abundance of high-performing thermoelectric materials. Consequentially, the desire to use zinc and antimony as framework elements to encage rattling cations and achieve phonon-glass-electron-crystal-type properties has remained an enticing goal with only two alkali metal clathrates to date, Cs8Zn18Sb28 and K58Zn122Sb207. Guided by Zintl electron-counting predictions, we explored the Ba-Zn-Pn (Pn = As, Sb) phase space proximal to the expected composition of the type-I clathrate. In situ powder X-ray diffraction studies revealed two "hidden" compounds which can only be synthesized in a narrow temperature range. The ex situ synthesis and crystal growth unveiled that instead of type-I clathrates, compositionally close but structurally different new clathrate-like compounds formed, Ba2Zn5As6 and Ba2Zn5Sb6. These materials crystallize in a unique structure, in the orthorhombic space group Pmna with the Wyckoff sequence i2h6gfe. Single-phase synthesis enabled the exploration of their transport properties. Rattling of the Ba cations in oversized cages manifested low thermal conductivity, which, coupled with the high Seebeck coefficients observed, are prerequisites for a promising thermoelectric material. Potential for further optimization of the thermoelectric performance by aliovalent doping was computationally analyzed.

The Structure of Boron Monoxide.

Boron monoxide (BO), prepared by the thermal condensation of tetrahydroxydiboron, was first reported in 1955; however, its structure could not be determined. With the recent attention on boron-based two-dimensional materials, such as borophene and hexagonal boron nitride, there is renewed interest in BO. A large number of stable BO structures have been computationally identified, but none are supported by experiments. The consensus is that the material likely forms a boroxine-based two-dimensional material. Herein, we apply advanced 11B NMR experiments to determine the relative orientations of B(B)O2 centers in BO. We find that the material is composed of D2h-symmetric O2B-BO2 units that organize to form larger B4O2 rings. Further, powder diffraction experiments additionally reveal that these units organize to form two-dimensional layers with a random stacking pattern. This observation is in agreement with earlier density functional theory (DFT) studies that showed B4O2-based structures to be the most stable.

Make Selenium Reactive Again: Activating Elemental Selenium for Synthesis of Metal Selenides Ranging from Nanocrystals to Large Single Crystals.

The inertness of elemental selenium is a significant obstacle in the synthesis of selenium-containing materials at low reaction temperatures. Over the years, several recipes have been developed to overcome this hurdle; however, most of the methods are associated with the use of highly toxic, expensive, and environmentally harmful reagents. As such, there is an increasing demand for the design of cheap, stable, and nontoxic reactive selenium precursors usable in the low-temperature synthesis of transition metal selenides with vast applications in nanotechnology, thermoelectrics, and superconductors. Herein, a novel synthetic route has been developed for activating elemental selenium by using a solvothermal approach. By comprehensive 77Se NMR, Raman, and infrared spectroscopies and gas chromatography-mass spectrometry, we show that the activated Se solution contained HSe-, [Se-Se]2-, and Se2- ions, as well as dialkyl selenide (R2Se) and dialkyl diselenide (R-Se-Se-R) species in dynamic equilibrium. This also corresponded to the first observation of naked Se22- in solution. The versatility of the developed Se precursor was demonstrated by the successful synthesis of (i) the polycrystalline room-temperature modification of the ß-Ag2Se thermoelectric material; (ii) large single crystals of superconducting ß-FeSe; (iii) CdSe nanocrystals with different particle sizes (3-10 nm); (iv) nanosheets of PtSe2; and (v) mono- and dibenzyl selenides and diselenides at room temperature. The simplicity and diversity of the developed Se activation method holds promise for applied and fundamental research.

Yb Substitution and Ultralow Thermal Conductivity of the Ca3-xYbxAlSb3 (0 ≤ x ≤ 0.81(1)) System.

A series of Yb-substituted Zintl phases in the Ca3-xYbxAlSb3 (0 ≤ x ≤ 0.81(1)) system has been synthesized by initial arc melting and post-heat treatment, and their isotypic crystal structures were characterized by both powder and single crystal X-ray diffraction analysis. All four title compounds adopted the Ca3AlAs3-type structure (space group Pnma, Pearson code oP28, Z = 4). The overall structure can be described as a combination of the 1-dimensional (1D) infinite chain of ∞1[Al(Sb2Sb2/2)] formed by two vertices sharing [AlSb4] tetrahedral moieties and three Ca2+/Yb2+ mixed sites located in between these 1D chains. The charge balance and the resultant independency of the 1D chains in the title system were explained by the Zintl-Klemm formalism [Ca2+/Yb2+]3[(4b-Al1-)(1b-Sb2-)2(2b-Sb1-)2/2]. A series of DFT calculations proved that (1) the band overlap between the d-orbital states from two types of cations and the p-orbital states from Sb at the high symmetry Γ point implied a heavily doped degenerate semiconducting behavior of the quaternary Ca2YbAlSb3 model and (2) the site preference of Yb for the M1 site was due to the electronic-factor criterion based on the Q values of each atomic site. The electron localization function calculations also proved that the two different shapes of lone pairs of the Sb atoms─the "umbrella-shape" and the "C-shape"─are determined by local geometry and the coordination environment on the anionic frameworks. Thermoelectric measurements of the quaternary title compound Ca2.19(1)Yb0.81AlSb3 showed an approximately two times larger ZT value than that of ternary Ca3AlSb3 at 623 K due to increased electrical conductivity and ultralow thermal conductivity originated from Yb substitution for Ca.

As-Se Pentagonal Linkers to Induce Chirality and Polarity in Mixed-Valent Fe-Se Tetrahedral Chains Resulting in Hidden Magnetic Ordering.

A novel mixed-valent hybrid chiral and polar compound, Fe7As3Se12(en)6(H2O), has been synthesized by a single-step solvothermal method. The crystal structure consists of 1D [Fe5Se9] chains connected via [As3Se2]-Se pentagonal linkers and charge-balancing interstitial [Fe(en)3]2+ complexes (en = ethylenediamine). Neutron powder diffraction verified that interstitial water molecules participate in the crystal packing. Magnetic polarizability of the produced compound was confirmed by X-ray magnetic circular dichroism (XMCD) spectroscopy. X-ray absorption spectroscopy (XAS) and 57Fe Mössbauer spectroscopy showed the presence of mixed-valent Fe2+/Fe3+ in the Fe-Se chains. Magnetic susceptibility measurements reveal strong antiferromagnetic nearest neighbor interactions within the chains with no apparent magnetic ordering down to 2 K. Hidden short-range magnetic ordering below 70 K was found by 57Fe Mössbauer spectroscopy, showing that a fraction of the Fe3+/Fe2+ in the chains are magnetically ordered. Nevertheless, complete magnetic ordering is not achieved even at 6 K. Analysis of XAS spectra demonstrates that the fraction of Fe3+ in the chain increases with decreasing temperature. Computational analysis points out several competing ferrimagnetic ordered models within a single chain. This competition, together with variation in the Fe oxidation state and additional weak intrachain interactions, is hypothesized to prevent long-range magnetic ordering.

Solvothermal Synthesis of [Cr7 S8 (en)8 Cl2 ]Cl3 ⋠2H2 O with Magnetically Frustrated [Cr7 S8 ]5+ Double-Cubes.

A novel transition metal chalcohalide [Cr7 S8 (en)8 Cl2 ]Cl3 ⋅ 2H2 O, with [Cr7 S8 ]5+ dicubane cationic clusters, has been synthesized by a low temperature solvothermal method, using dimethyl sulfoxide (DMSO) and ethylenediamine (en) solvents. Ethylenediamine ligand exhibits bi- and monodentate coordination modes; in the latter case ethylenediamine coordinates to Cr atoms of adjacent clusters, giving rise to a 2D polymeric structure. Although magnetic susceptibility shows no magnetic ordering down to 1.8 K, a highly negative Weiss constant, θ=-224(2) K, obtained from Curie-Weiss fit of inverse susceptibility, suggests strong antiferromagnetic (AFM) interactions between S=3/2 Cr(III) centers. Due to the complexity of the system with (2S+1)7 =16384 microstates from seven Cr3+ centers, a simplified model with only two exchange constants was used for simulations. Density-functional theory (DFT) calculations yielded the two exchange constants to be J1 =-21.4 cm-1 and J2 =-30.2 cm-1 , confirming competing AFM coupling between the shared Cr3+ center and the peripheral Cr3+ ions of the dicubane cluster. The best simulation of the experimental data was obtained with J1 =-20.0 cm-1 and J2 =-21.0 cm-1 , in agreement with the slightly stronger AFM exchange within the triangles of the peripheral Cr3+ ions as compared to the AFM exchange between the central and peripheral Cr3+ ions. This compound is proposed as a synthon towards magnetically frustrated systems assembled by linking dicubane transition metal-chalcogenide clusters into polymeric networks.

Add a Pinch of Tetrel: The Transformation of a Centrosymmetric Metal into a Nonsymmorphic and Chiral Semiconductor.

Centrosymmetric skutterudite RhP3 was converted to a nonsymmorphic and chiral compound RhSi0.3 P2.7 (space group P21 21 21 ) by means of partial replacement of Si for P. The structure, determined by a combination of X-ray crystallography and solid state 31 P NMR, exhibits branched polyanionic P/Si chains that are unique among metal phosphides. A driving force to stabilize the locally noncentrosymmetric cis-RhSi2 P4 and fac-RhSi3 P3 fragments is π-electron back-donation between the Rh t2g -type orbitals and the unoccupied antibonding Si/P orbitals, which is more effective for Si than for P. In situ studies and total energy calculations revealed the metastable nature of RhSi0.3 P2.7 . Electronic structure calculations predicted centrosymmetric cubic RhP3 to be metallic which was confirmed by transport properties measurements. In contrast, the electronic structure for chiral orthorhombic RhSi0.3 P2.7 contained a bandgap, and this compound was shown to be a narrow gap semiconductor.

From Three-Dimensional Clathrates to Two-Dimensional Zintl Phases AMSb2 (A = Rb, Cs; M = Ga, In) Composed of Pentagonal M-Sb Rings.

Three new antimonide Zintl phases, RbGaSb2, CsGaSb2, and CsInSb2, were discovered during exploration of corresponding A-M-Sb (A = Rb, Cs; M = Ga, In) ternary systems while searching for new clathrates. The AGaSb2 phases crystallize in the tetragonal space group P42/nmc (No. 137) in the LiBS2 structure type, while CsInSb2 crystallizes in lower symmetry in the orthorhombic space group Cmce (No. 64) in the KGaSb2 structure type with additional disorder of one of the Cs sites. The crystal structures of all three reported AMSb2 compounds are composed of two-dimensional [MSb2]- tetrahedral layers separated by Rb+ or Cs+ cations. [MSb2]- layers are built from fused M-Sb pentagons and hexagons, which are also the main structural units for A8M27Sb19 clathrate cages. The semiconductor nature of AMSb2 was suggested by band structure calculations and confirmed by transport property characterization. CsGaSb2 is a rare example of an n-type pnictide Zintl phase. All reported compounds exhibit low thermal conductivity typical for complex antimonides of heavy elements.

Tuning of Cr-Cr Magnetic Exchange through Chalcogenide Linkers in Cr2 Molecular Dimers.

A set of three Cr-dimer compounds, Cr2Q2(en)4X2 (Q: S, Se; X: Br, Cl; en: ethylenediamine), with monoatomic chalcogenide bridges have been synthesized via a single-step solvothermal route. Chalcogenide linkers mediate magnetic exchange between Cr3+ centers, while bidentate ethylenediamine ligands complete the distorted octahedral coordination of Cr centers. Unlike the compounds previously reported, none of the chalcogenide atoms are connected to extra ligands. Magnetic susceptibility studies indicate antiferromagnetic coupling between Cr3+ centers, which are moderate in Cr2Se2(en)4X2 and stronger in Cr2S2(en)4Cl2. Fitting the magnetic data requires a biquadratic exchange term. High-frequency EPR spectra showing characteristic signals due to coupled S = 1 spin states could be interpreted in terms of the "giant spin" Hamiltonian. A fourth compound, Cr2Se8(en)4, has a single diatomic Se bridge connecting the two Cr3+ centers and shows weak ferromagnetic exchange interactions. This work demonstrates the tunability in strength and type of exchange interactions between metal centers by manipulating the interatomic distances and number of bridging chalcogenide linkers.

Machine Learning-Guided Discovery of Ternary Compounds Containing La, P, and Group 14 Elements.

We integrate a deep machine learning (ML) method with first-principles calculations to efficiently search for the energetically favorable ternary compounds. Using La-Si-P as a prototype system, we demonstrate that ML-guided first-principles calculations can efficiently explore crystal structures and their relative energetic stabilities, thus greatly accelerate the pace of material discovery. A number of new La-Si-P ternary compounds with formation energies less than 30 meV/atom above the known ternary convex hull are discovered. Among them, the formation energies of La5SiP3 and La2SiP phases are only 2 and 10 meV/atom, respectively, above the convex hull. These two compounds are dynamically stable with no imaginary phonon modes. Moreover, by replacing Si with heavier-group 14 elements in the eight lowest-energy La-Si-P structures from our ML-guided predictions, a number of low-energy La-X-P phases (X = Ge, Sn, Pb) are predicted.

Evolution of Bonding and Magnetism via Changes in Valence Electron Count in CuFe2-xCoxGe2.

A series of solid solutions, CuFe2-xCoxGe2 (x = 0, 0.2, 0.4, 0.8, and 1.0), have been synthesized by arc-melting and characterized by powder X-ray and neutron diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All compounds crystallize in the CuFe2Ge2 structure type, which can be considered as a three-dimensional framework built of fused MGe6 octahedra and MGe5 trigonal bipyramids (M = Fe and Co), with channels filled by rows of Cu atoms. As the Co content (x) increases, the unit cell volume decreases in an anisotropic fashion: the b and c lattice parameters decrease while the a parameter increases. The changes in all the parameters are nearly linear, thus following Vegard's law. CuFe2Ge2 exhibits two successive antiferromagnetic (AFM) orderings, corresponding to the formation of a commensurate AFM structure, followed by an incommensurate AFM structure observed at lower temperatures. As the Co content increases, the AFM ordering temperature (TN) gradually decreases, and only one AFM transition is observed for x ≥ 0.2. The magnetic behavior of unsubstituted CuFe2Ge2 was found to be sensitive to the preparation method. The temperature-dependent zero-field 57Fe Mössbauer spectra reveal two hyperfine split components that evolve in agreement with the two consecutive AFM orderings observed in magnetic measurements. In contrast, the field-dependent spectra obtained for fields ≥2 T reveal a parallel arrangement of the moments associated with the two crystallographically unique metal sites. Electronic band structure calculations and chemical bonding analysis reveal a mix of strong M-M antibonding and non-bonding states at the Fermi level, in support of the overall AFM ordering observed in zero field. The substitution of Co for Fe reduces the population of the M-M antibonding states and the overall density of states at the Fermi level, thus suppressing the TN value.

New Noncentrosymmetric Tetrel Pnictides Composed of Square-Planar Gold(I) with Peculiar Bonding.

Three novel isostructural equiatomic gold tetrel pnictides, AuSiAs, AuGeP, and AuGeAs, were synthesized and characterized. These phases crystallize in the noncentrosymmetric (NCS) monoclinic space group Cc (no. 9), featuring square-planar Au within cis-[AuTt2 Pn2 ] units (Tt=tetrel, Si, Ge; Pn=pnictogen, P, As). This is in drastic contrast to the structure of previously reported AuSiP, which exhibits typical linear coordination of Au with Si and P. Chemical bonding analysis through the electron localization function suggests covalent two-center two-electron Tt-Pn bonds, and three-center Au-Tt-Au and Au-Pn-Au bonds with 1.6 e- per bond. X-ray photoelectron spectroscopy studies support the covalent and nonionic nature of Au-Pn and Au-Tt bonds. The title materials were found to be n-type narrow-gap semiconductors or semimetals, with nearly temperature-independent electrical resistivities and low thermal conductivities. A combination of the semimetallic properties with tunable NCS structure provides opportunities for the development of materials based on gold tetrel pnictides.

Crystal Structure and Properties of Layered Pnictides BaCuSi2Pn3 (Pn = P, As).

Two novel layered compounds BaCuSi2Pn3 (Pn = P, As) adopting new structure types are reported. As revealed by single-crystal X-ray diffraction, both compounds are composed of unique Cu-Si-Pn layers featuring CuPn3 and Si2Pn6 structural motifs found in other archetypal pnictide materials. The stacking of the isostructural Cu-Si-Pn layers is different for phosphide and arsenide compounds. Synthesis from elements aided by in situ synchrotron powder X-ray diffraction resulted in the obtainment of bulk powders with a minimized amount of admixtures. Experimentally measured physical properties of BaCuSi2As3 unexpectedly showed metal-like behavior at temperatures above 15 K, despite the fact that density functional theory calculations predict a small band gap of 0.4 eV. BaCuSi2As3 exhibits ultralow thermal conductivity, which can be explained by the combination of a layered crystal structure with alternating covalent and ionic bonding, which feature rattling of Cu atoms similar to that in tetrahedrites.

III-V Clathrate Semiconductors with Outstanding Hole Mobility: Cs8In27Sb19 and A8Ga27Sb19 (A = Cs, Rb).

Three novel unconventional clathrates with unprecedented III-V semiconducting frameworks have been synthesized: Cs8In27Sb19, Cs8Ga27Sb19, and Rb8Ga27Sb19. These clathrates represent the first examples of tetrel-free clathrates that are completely composed of main group elements. All title compounds crystallize in an ordered superstructure of clathrate-I in the Ia3̅ space group (No. 206; Z = 8). In the clathrate framework, a full ordering of {Ga or In} and Sb is observed by a combination of high-resolution synchrotron single-crystal and powder X-ray diffraction techniques. Density functional theory (DFT) calculations show that all three clathrates are energetically stable with relaxed lattice constants matching the experimental data. Due to the complexity of the crystal structure composed of heavy elements, the reported clathrates exhibit ultralow thermal conductivities of less than 1 W·m-1·K-1 at room temperature. All compounds are predicted and experimentally confirmed to be narrow-bandgap p-type semiconductors with high Seebeck thermopower values, up to 250 µV·K-1 at 300 K for Cs8In27Sb19. The latter compound shows carrier concentrations and mobilities, 1.42 × 1015 cm-3 and 880 cm2 ·V-1·s-1, which are on par with the values for parent binary InSb, one of the best electronic semiconductors. The high hole carrier mobility is uncommon for complex bulk materials and a highly desirable trait, opening ways to design semiconducting materials based on tunable III-V clathrates.

Tuning Fe-Se Tetrahedral Frameworks by a Combination of [Fe(en)3]2+ Cations and Cl- Anions.

A one-dimensional (1D) chain compound [Fe(en)3]3(FeSe2)4Cl2 (en = ethylenediamine), featuring tetrahedral FeSe2 chains separated by [Fe(en)3]2+ cations and Cl- anions, has been synthesized by a low temperature solvothermal method using simple starting materials. The degree of distortion in the Fe-Se backbone is similar to previously reported compounds with isolated 1D FeSe2 chains. 57Fe Mössbauer spectroscopy reveals the mixed-valent nature of [Fe(en)3]3(FeSe2)4Cl2 with Fe3+ centers in the [FeSe2]- chains and Fe2+ centers in the [Fe(en)3]2+ complexes. SQUID magnetometry indicates that [Fe(en)3]3(FeSe2)4Cl2 is paramagnetic with a reduced average effective magnetic moment, µeff = 9.51 µB per formula unit, and a negative Weiss constant, θ = -10.9(4) K, indicating antiferromagnetic (AFM) nearest neighbor interactions within the [FeSe2]- chains. Weak antiferromagnetic coupling between chains, combined with rather strong intrachain AFM coupling, leads to spin-glass behavior at low temperatures, as indicated by a frequency shift of the peak observed at 3 K in AC magnetic measurements. A combination of [Fe(en)3]2+ and Cl- ions is also capable of stabilizing mixed-valent 2D Fe-Se puckered layers in the crystal structure of [Fe(en)3]4(Fe14Se21)Cl2, where Fe14Se21 layers have a unique topology with large open pores. Property measurements of [Fe(en)3]4(Fe14Se21)Cl2 could not be performed due to the inability to either grow large crystals or synthesize this material in single-phase form.

1D materials from ionic self-assembly in mixtures containing chromonic liquid crystal mesogens.

Ionic self-assembly is a simple yet powerful method to obtain robust nanostructures. Herewith, we use mixtures of oppositely-charged porphyrins that can act as mesogens to form chromonic liquid crystals in water, i.e., molecular stacks with orientational (nematic) or positional (hexagonal) order. Electrostatic locking coupled with π-π interactions between aromatic groups within the stacks, together with inter-stack hydrogen bonding induce formation of all-organic crystalline nanofibers with high aspect ratio (a few tenths of nanometers in width but several tenths of micrometers in length) and that display branching. The nanofibers prepared from metal-free porphyrin units feature interesting optical properties, including an absorption spectrum that is different from the simple sum of the individual spectra of the components, which is attributed to a striking aggregation-induced chromism. When in contact with some polar organic solvents the materials become fluorescent, as a result of disaggregation. In a proof-of-concept, the obtained self-assembled one-dimensional (1D) materials were carbonized (yield ca. 60%) to produce nitrogen-doped carbon nanofibers that can be used as active electrode materials for energy storage applications.